all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User manual | Users Manual | 2.24 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | ID Label/Location Info | March 05 2016 / January 06 2016 | ||||||
1 2 | RF Exposure Info | March 05 2016 / January 06 2016 |
1 2 | User manual | Users Manual | 2.24 MiB |
Baicells mBS1100 Base Station Installation Guide V100R001C00 All rights reserved Baicells Technologies Co., Ltd. Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx About This Document This document is a guidance of mBS1100 hardware installation for installation personnel, which includes the preparation of installation tools and supporting material before installation, the demands of installation environment, installation of base station, connection of cable and power on. Accomplish the installation of the device according to this guide, the installation personnel can avoid potential damage to the device during the installation procedure, which makes sure the subsequent good running of the device. Copyright Notice Baicells copyrights this specification. No part of this specification may be reproduced in any form or means, without the prior written consent of Baicells. Disclaimer This specification is preliminary and is subject to change at any time without notice. Baicells assumes no responsibility for any errors contained herein. For more information, please consult our technical engineers. Revision Record Date Version Description 30 June,2016 14 July,2016 30 Oct, 2016 V1.0 V1.1 V1.2 Initial Released. Update according to the hardware change. Update according to the hardware change. Contact Us Baicells Technologies Co., Ltd.North America Address: 555 Republic Drive, Suite 200 Plano, TX 75074 E-mail: support_na@baicells.com Phone: +1-972-800-1157 Website: http://www.baicells.com/
Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Contents 1. Product Overview ....................................................................................................... 1 1.1 Introduction ............................................................................................................... 1 1.2 Features ...................................................................................................................... 1 1.3 Appearance ................................................................................................................ 2 1.4 Technical Specification ............................................................................................... 3 1.4.1 Hardware Specification....................................................................................... 3 1.4.2 Software Specification ........................................................................................ 4 1.4.3 Environment Specification .................................................................................. 5 2. Out-of-Box Audit ......................................................................................................... 6 2.1 Shipping List .............................................................................................................. 6 2.2 Base Station Accessories ......................................................................................... 7 3. Installation Preparation .............................................................................................. 9 3.1 Support Materials ..................................................................................................... 9 3.2 Installation Tools ...................................................................................................... 9 3.3 Installation Environment .......................................................................................... 10 3.3.1 Locational Requirements .................................................................................. 10 3.3.2 Environmental Requirements ........................................................................... 10 3.4 Lightening and Grounding Protection ...................................................................... 10 3.5 Weatherproof Protection ......................................................................................... 11 4. Base Station Installation ............................................................................................. 12 4.1 Installation Procedure ............................................................................................ 12 4.2 Connect Cable .......................................................................................................... 12 4.2.1 Structure of Cable Connection ......................................................................... 12 4.2.2 Connect GPS Antenna ....................................................................................... 14 4.2.3 Connect RF Cable .............................................................................................. 15 4.2.4 Connect Ethernet Cable .................................................................................... 15 4.2.5 Connect Power Connector ................................................................................ 17 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 4.2.6 Connect Ground Cable ...................................................................................... 19 4.3 Install the Mounting Bracket and Handle ................................................................ 20 4.4 Install GPS Antenna .................................................................................................. 22 4.5 Install on Pole ........................................................................................................... 24 4.6 Install on Wall ........................................................................................................... 25 4.7 Install Antenna Feeder System................................................................................. 25 4.7.1 Install Omnidirectional Antennas ..................................................................... 25 4.7.2 Install Directional Antennas.............................................................................. 27 5. Power On ................................................................................................................... 29 Additional Information............................................................................... 30 Appendix A A.1 Antenna Information ................................................................................................ 30 A.2 Maximum Output Power.......................................................................................... 31 A.3 Regulatory Compliance ........................................................................................... 31 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Figures Figure 1-1 mBS1100 Appearance ................................................................................ 2 Figure 1-2 mBS1100 Interfaces .................................................................................... 2 Figure 3-1 Antenna Weatherproofing ......................................................................... 11 Figure 4-1 Installation Procedure of mBS1100 .......................................................... 12 Figure 4-2 mBS1100 Wire Connection Structure ....................................................... 13 Figure 4-3 Connect the Ground Wire of GPS Lightning Arrestor ............................... 14 Figure 4-4 Connect the GPS RF Cable to the GPS Lightning Arrestor ..................... 14 Figure 4-5 Weatherproof protection of the GPS RF Cable connection ..................... 14 Figure 4-6 Connect GPS RF Cable ............................................................................ 15 Figure 4-7 Connect RF Cable .................................................................................... 15 Figure 4-8 Separate the Ethernet Weatherproof Connector ...................................... 16 Figure 4-9 Install the Ethernet weatherproof Connector ............................................ 16 Figure 4-10 Connect the Ethernet Interface ............................................................... 16 Figure 4-11 Power Adaptor Input and Output ............................................................. 17 Figure 4-12 Disassemble the Power weatherproof Connector .................................. 18 Figure 4-13 Unscrew the compression screw ............................................................ 18 Figure 4-14 Description of A and B terminal .............................................................. 18 Figure 4-15 Connect the PWR Interface .................................................................... 19 Figure 4-16 Location of Grounding Screws................................................................ 19 Figure 4-17 Connect GPS Lightning Arrestor Grounding Cable ................................ 20 Figure 4-18 Ground Cable Complete ......................................................................... 20 Figure 4-19 Install the Mounting Bracket ................................................................... 21 Figure 4-20 Install the Handle .................................................................................... 21 Figure 4-21 Installation of Mounting Bracket and Handle Completed ....................... 22 Figure 4-22 Omnidirectional Antenna Installation (1) ................................................. 26 Figure 4-23 Omnidirectional Antenna Installation (2) ................................................. 26 Figure 4-24 Assembling Procedure of Directional Antennas ..................................... 27 Figure 4-25 Transportation the Antennas in the Height ............................................. 27 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Figure 4-26 Directional Antenna Installation .............................................................. 28 Figure 5-1 LED Indicators .......................................................................................... 29 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Tables Table 1-1 mBS1100 Interface Description .................................................................... 2 Table 1-2 mBS1100 Interface Indicators ...................................................................... 3 Table 2-1 Shipping List ................................................................................................. 6 Table 2-2 Base Station Accessories ............................................................................. 7 Table 3-1 Support Materials for Installing Base Stations ............................................. 9 Table 3-2 Environmental Requirements of the Base Station ..................................... 10 Table 4-1 Connection Serial Number Description ...................................................... 13 Table 5-1 mBS1100 Indicator Description .................................................................. 29 Table 5-2 Antenna Information ................................................................................... 30 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 1. Product Overview 1.1 Introduction Baicells mBS1100 is a high performance outdoor 3.65GHz micro base station based on TD-LTE technology, which is developed by Baicells. The mBS1100 supports wired and wireless backhaul connections to backbone networks, and provides LTE access to user terminals, implemented voice and data service transmissions. The mBS1100 makes use of the current transmission resources to reduce the operators investment, implement the low-cost construction of LTE network s and enhance indoor coverage, thereby providing high-speed broadband access for users in assembly occupations. The mBS1100 can be widely used by telecom operators, broadband operators, enterprises, and so on. 1.2 Features Adopt the integration design of baseband and RF. Based on 3GPP international standard TD-LTE technology; provide high speed data service; support a maximum transfer rate of DL: 110Mbit/s, UL: 20Mbit/s. Support flexible uplink and downlink time slot ratio: 1(2:2), 2(1:3), and high speed data transmission. Support 10MHz/20MHz operation bandwidth. Varied backhaul, flexible to deploy. Built-in DHCP Server, DNS Client and NAT functionality, providing a strong high speed routing ability. Security services to provide timely protection against potential security risks and illegal intrusion. Convenient and simple web management. Integration as required, easy to installation and deployment, accurate coverage and improved network capacity. Support network management functions, which includes the management, monitoring and maintenance. 1 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 1.3 Appearance The mBS1100 base station appearance is shown in Figure 1-1. Figure 1-1 mBS1100 Appearance The mBS1100 interfaces are shown in Figure 1-2. Figure 1-2 mBS1100 Interfaces The mBS1100 interfaces are described in Table 1-1. Interface Name Description Table 1-1 mBS1100 Interface Description PWR GPS ANT1 Power interface: +48V (+42V~+58V) External GPS antenna, N-female connector. External antenna 1, N-female connector. 2 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Interface Name Description DATA MGMT ANT2 Gigabit Ethernet interface, external transmission network. Gigabit Ethernet debug interface. External antenna 2, N-female connector. The mBS1100 interface indicators are described in Table 1-2. Table 1-2 mBS1100 Interface Indicators Identity Color Status Description PWR Green Steady On Power On OFF No Power Supply Fast flash: 0.125s on,0.125s off The board is loading. RUN Green Slow flash: 1s on,1s off OFF The board is normal. No power input or board fault ALM Red Steady On Hardware alarm, e.g. VSWR alarm OFF No alarm ACT Green Steady On OFF The transmitting channel works normally The transmitting channel works abnormally 1.4 Technical Specification 1.4.1 Hardware Specification Item Description LTE Mode LTE TDD LTE Frequency 3650 MHz ~ 3700 MHz Channel Bandwidth 10 MHz, 20 MHz Output Power 33 dBm Receiving sensitivity
-102 dBm Synchronization A-interface synchronization (same or different frequency), Mode 1588V2, GPS Backhaul Mode Wired backhaul: Ethernet;
Wireless backhaul: WLAN, LTE Relay MIMO 2*2MIMO Dimension 330mm (L) * 220mm (W) * 105mm (H) Installation Method Pole mounted, wall mounted 3 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Item Description Antenna External high gain antenna Overall Power
< 65 W Power Weight Note:
48V DC, AC adaptor About 5kg The test method of receiving sensitivity is proposed by the 3GPP TS 36.104, which is based on 5MHz bandwidth, FRC A1-3 in Annex A.1 (QPSKR=1/325RB) standard. 1.4.2 Software Specification Item Description LTE Standard LTE TDD 3GPP Release 9 Maximum Throughput Business Capacity 20MHz: DL 110Mbps, UL 20Mbps 10MHz: DL 55Mbps, UL 7Mbps 32 concurrent users, 96 RRC connection users Scheduling Mode Based on QoS scheduling Modulation Mode QPSK, 16QAM, 64QAM Voice Solution Support CSFB, VoLTE, SRVCC Traffic Offload Support LIPA/SIPTO, which is Local IP Access and Selected
(optional) IP Traffic Offload for short SON Self-organizing network: support plug and play, automatic start, optimization and configuration RAN Sharing Support Network Management Support TR069 interface protocol Interface Northbound Interface MTBF MTTR Support Web service, Socket, FTP and other interface modes 150000 hours 1 hour Support remote/local maintenance, based on SSH protocol Support remote maintenance Support online status management Support performance statistics Maintenance Support failure management Support configuration management Support local or remote software upgrading and loading Support log Support connectivity diagnosis 4 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Item Description Support automatic start and configuration Support alarm reporting 1.4.3 Environment Specification Item Description Operating Temperature
-40C ~ 55C Humidity Change Rate of Temperature 5% ~ 100%
1/min Atmospheric Pressure 70kPa ~ 106kPa IP Protection Grade IP65 Lightning Protection Power interface: differential mode: 10KA common mode: 20KA Ethernet interface: differential mode: 3KA common mode: 5KA 5 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 2. Out-of-Box Audit 2.1 Shipping List Before opening the box, make sure the package is in good condition, undamaged and not wet. During the unpacking, avoid potential damaging impacts from hits or excessive force. Once unpacked, check the contents to see if they are consistent with that in the shipping list shown in Table 2-1. Number Item Quantity Description Table 2-1 Shipping List mBS1100 Power supply U type clamp mounting kit mounting bracket on pole Weather-proof DC Power connector Weather-proof Ethernet connector GPS antenna and RF cable Handle GPS mounting bracket GPS Lightning Arrestor Connector for extending power cable Ground terminals All-weather electrical tape and mastic tape Warranty Certification User guide 1 1 2 2 1 1 1 1 2 1 1 2 1 1 1 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Check whether the base stations tag is consistent with the requirement 100V ~ 277V AC to 48V DC adaptor Used for installation on pole, including U type clamp*2, omega*2, and M8 nut*4 Fixed accessories
-
-
-
Fixed accessories, including GPS mounting bracket 1 and GPS mounting bracket 2
-
Used for making extended power cable Used for making ground cable.
-
-
-
-
6 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Note:
During the unpacking, if the outer package is damaged or wet, stop unpacking and find the cause. Report the issue to the vendor. For any shortage or damage that is identified, report the local vendor within 10 days. 2.2 Base Station Accessories Table 2-2 shows the accessories of the base station mBS1100. Table 2-2 Base Station Accessories Accessory Name GPS antenna GPS RF cable GPS antenna lightning arrestor U type clamp mounting kit Mounting bracket 7 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Accessory Name Handle AC/DC power adaptor Power cable lengthened connector 3M all-weather mastic tape 3M vinyl electrical tape GPS mounting bracket 1 GPS mounting bracket 2 Water-proof DC Power plug Water-proof Ethernet connector 8 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 3. Installation Preparation 3.1 Support Materials Prepare the following support materials accordingly, as given in Table 3-1. Item Power cable Table 3-1 Support Materials for Installing Base Stations Description
< AWG16e.g., AWG14 Shorter than 1150 feet Antenna RF cable 50 ohm feeder Ethernet cable Outdoor CAT6 Shorter than 330 feet Antenna Omnidirectional, or directional antenna Ground wire 16mm yellow-green wire 3.2 Installation Tools The following tools are needed during the installation. Level bar Marking pen Percussion drill and some drill heads hammer Knife Vise Wrench Cross screw Cable vice Tape measure driver 5mm L-shape allen Torx screw T7 screwdriver Ladder wrench driver head 9 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 3.3 Installation Environment 3.3.1 Locational Requirements Environments with high-temperatures, harmful gases, unstable voltages, volatile vibrations, loud noises, flames, explosives, and electromagnetic interference (large radar stations, transmitting stations, transformer substations) are not suitable for the operation of mBS1100, and thus should be avoided. Places prone to have impounded water, soaking, leakage, or condensation, should also be avoided. Factors like climate, hydrology, geology, earthquake, electric power, and transportation should be taken into consideration in the construction process so that a proper location can be chosen to meet the communication engineering environmental requirements, as well as the technical requirements of network planning and communication equipment. 3.3.2 Environmental Requirements Table 3-2 gives the base stations environmental requirements with regards to temperature, humidity, and voltage. Table 3-2 Environmental Requirements of the Base Station Item Range Typical value Humidity
-40~ 55 Relative humidity (no condensation) 0% ~ 100%
Safety voltage 42V ~ 58V 25 5% ~ 95%
48V 3.4 Lightening and Grounding Protection CAUTION:
It is unlikely to happen but since the LTE eNB is very sophisticated equipment so we would recommend you to test it on the ground to make sure everything is functioning before install on the tower. Groun ding Notes:
The ground wire adopts yellow-green wire that is no smaller than 16 mm. Grounding principle: as near as possible. The mBS1100 is equipped with one GPS lightning arrestor. The GPS lightning 10 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx arrestor needs to connect to one grounding screw via an M6 screw. Another grounding screw is used for connecting to the reliable outdoor grounding point (earth). The connecting point must be tin-soldered. The connection of the grounding points and the ground bar need to be tight and reliable. Rustproofing the terminals is required. This can be done with rust preventing paint, anti-oxidation coatings, grease, and so on. 3.5 Weatherproof Protection 1. To weatherproof the connections, wrap them with all-weather electrical tape and mastic tape, as shown in Figure 3-1. Figure 3-1 Antenna Weatherproofing 2. Be aware that at least three layers of tapes are needed, and make sure that the wrapping direction of the last layer is from the bottom up. The last layer should be tight enough to keep it from cracking. 11 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 4. Base Station Installation 4.1 Installation Procedure The installation procedure of mBS1100 is given in Figure 4-1. Figure 4-1 Installation Procedure of mBS1100 4.2 Connect Cable 4.2.1 Structure of Cable Connection The wire connection relationship of the mBS1100 is shown in Figure 4-2. 12 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Figure 4-2 mBS1100 Wire Connection Structure The description of the connection serial number is shown in Table 4-1. Number Initial Terminal End of Connection Cable Type Table 4-1 Connection Serial Number Description 1 2 3 4 5 6 7 8 ANT2 ANT1 GPS antenna RF cable RF cable GPS antenna lightning Surge RF feeder line RF feeder line RF feeder line Power supply system (AC) Input end of power Power supply line adaptor
< AWG16 Output end of power PWR interface of Power supply line adaptor Ethernet mBS1100 DATA interface of mBS1100
< AWG16 RJ45 cable Grounding point of GPS Grounding screw of the Yellow-green antenna lightning arrestor base station (GND) ground wire Grounding screw of the Grounding bar base station (GND) Yellow-green ground wire 13 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 4.2.2 Connect GPS Antenna 1. Connect the ground wire of GPS lightning arrestor to the lightning arrestor, and fasten it, as shown in Figure 4-3. Figure 4-3 Connect the Ground Wire of GPS Lightning Arrestor 2. Connect one end of the GPS RF cable to the GPS lightning arrestor, as shown in Figure 4-4. Figure 4-4 Connect the GPS RF Cable to the GPS Lightning Arrestor 3. The connection point of RF cable needs to be weatherproofed. For more detail, refer to 3.5 Weatherproof Protection. After weatherproof protection, it is shown in Figure 4-5. Figure 4-5 Weatherproof protection of the GPS RF Cable connection 14 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 4. Connect the GPS RF cable to the GPS antenna lightning arrestor. It is necessary for the GPS antenna interfaces to be weatherproofed. Refer to 3.5 Weatherproof Protection for more detail. The connection is complete shown in Figure 4-6. Figure 4-6 Connect GPS RF Cable 4.2.3 Connect RF Cable 1. Connect the RF cable to the ANT1 and ANT2 interface of the mBS1100. 2. It is necessary for the ANT1 and ANT2 interfaces to be weatherproofed. Refer to 3.5 Weatherproof Protection for more detail. The connection is complete shown in Figure 4-7 Figure 4-7 Connect RF Cable 4.2.4 Connect Ethernet Cable Weatherproof connector is adopted for Ethernet cables. 1. Disassemble the Ethernet weatherproof connector, as shown in Figure 4-8. 15 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Figure 4-8 Separate the Ethernet Weatherproof Connector 2. Slide the weatherproof connector components in turn. A click should be heard to ensure that the RJ45 connector has clip into the slot of weatherproof connector, as shown in Figure 4-9. Figure 4-9 Install the Ethernet weatherproof Connector 3. Connect the weatherproof connector to the base stations DATA interface, and fasten it. The alignment of bayonet when connection the weatherproof connector with the base station. Once aligned, twist it about 90 degrees clockwise. 4. It is necessary for the Ethernet interface to be weatherproofed. Refer to 3.5 Weatherproof Protection for more detail. The connection is complete shown in Figure 4-10. Figure 4-10 Connect the Ethernet Interface 16 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 4.2.5 Connect Power Connector The weatherproof connector is adopted for power cables. First, you need to assemble the power weatherproof connector. In the accessories for base station, the output end of the power adaptor has red and black power cord, where the red power cord is +48V, and the black power cord is 0V. The output voltage is 48V DC. The connection relationship of the power cord and the power connector is shown in Figure 4-11. Figure 4-11 Power Adaptor Input and Output The input of power adaptor is the AC power supply, where the voltage range is 100V ~
277V, 50/60Hz. Make the power cable so it can reach the distance between the installation site and the power supply system. Strip the 12mm insulating layer with wire stripper, which is inserted into the power connector. It is recommended that the power cord length is kept below 1150 feet. The connection steps of power cable is as follows. 1. Disassemble the power weatherproof connector into four parts, as shown in Figure 4-12. 17 ACRed/V+Black/V-Power ConnectorABINPUTPower AdaptorOUTPUTV+V-DC Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Figure 4-12 Disassemble the Power weatherproof Connector 2. Slide the weatherproof connector parts 1, 2 and 3 in turn. 3. Unscrew the compression screw of the fourth part of the power connector with a T-15 torx screw driver, as shown in Figure 4-13 . Figure 4-13 Unscrew the compression screw 4. Insert the red power cable (48V) into terminal A, and insert the black power cable
(0V) into terminal B, as shown in Figure 4-14. Figure 4-14 Description of A and B terminal 18 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 5. Tighten the power cord in the socket by using T-15 torx screw driver to crimp the threads, ensure the power cable crimping tight. 6. Screw parts 1, 2, and 3 respectively. The assembly of the power connector is complete. 7. Connect the power connector to the PWR interface of the base station and fasten it. 8. Weatherproof the power connector. Refer to 3.5 Weatherproof Protection for more detail. The connection is shown in Figure 4-10. Figure 4-15 Connect the PWR Interface 9. The input of the power adaptor connects to the outlet. If the outlet is indoors, place the power adaptor indoors. If the outlet is outdoors, place the power adaptor in a water proof box. 4.2.6 Connect Ground Cable The mBS1100 provides two grounding screws, which is located on the connector panel side of the base station, as shown in Figure 4-16. Figure 4-16 Location of Grounding Screws 1. Unscrew one grounding screw, connect the GPS lightning arrestor grounding cable 19 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx to the grounding screw of the device, as shown in Figure 4-17. Figure 4-17 Connect GPS Lightning Arrestor Grounding Cable 2. Unscrew another grounding screw, connect one end of the ground cable to the grounding screw of the device, as shown in Figure 4-18. Figure 4-18 Ground Cable Complete 3. The other end of the ground cable needs to connect to a good ground (earth). 4.3 Install the Mounting Bracket and Handle 1. Use the M6*12 socket head screw to fix the bracket on both sides of the mBS1100, as shown in Figure 4-19. 20 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Figure 4-19 Install the Mounting Bracket 2. Use the M6*12 socket head screw to fix the handle on right side of the mBS1100, as shown in Figure 4-20. Figure 4-20 Install the Handle 3. Figure 4-21 shows what it looks like when the installation of rack and handle is done. 21 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Figure 4-21 Installation of Mounting Bracket and Handle Completed 4.4 Install GPS Antenna Installation requirements on the GPS antenna:
No major blocking from buildings in the vicinity. Keep the rooftop buildings a distance away from the GPS. Make sure the space atop within 90 degrees (at least 45 degrees) is not blocked by any buildings. Avoid installing the GPS in the vicinity of any other transmitting and receiving devices. Avoid interference from other transmitting antennas to the GPS antennas. Should be installed within 45 degrees to the lightning rod. The GPS antenna lightning arrestor is required before connecting to the base station. The following describes the steps of the GPS antenna installation. 1. Prepare the following assembly units for the GPS antenna installation. Included GPS antenna, feed cable, GPS mounting bracket 1 and GPS mounting bracket 2. 2. Fit the GPS mounting bracket 2 on base station with M4 screws. 22 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 3. Fit the GPS mounting bracket 1 on the GPS mounting bracket 2 with an M4 screw according to the required angle. 4. Fit the GPS antenna on the GPS mounting bracket 1 with an M4 screw. Vertical installation is required. 5. Installation complete. 23 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 4.5 Install on Pole Required diameter of the pole: 30mm ~ 125mm. 1. The two U type clamps pass through the mounting brackets on both sides of the base station. Then the omegas pass through the threaded rods of the U type clamp, and fasten them with M8 nuts. 2. Hold the assembly up to the pole. Attach the two omegas to the threaded rods with M8 nuts. 24 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 4.6 Install on Wall 1. Put the base station on the wall to install, and mark the drilling locations. 2. Drill four 10mm diameter and 70mm depth holes in the wall by following the marked locations. 3. Check the up/down direction of the installation rack, and then fix the base station to the wall using M8*80 expansion screws. 4.7 Install Antenna Feeder System There are two kinds of outdoor antennas, omnidirectional outdoor antennas and directional outdoor antennas, whose installation will be introduced in the following, respectively. 4.7.1 Install Omnidirectional Antennas One should pay attention to the followings while installing the omnidirectional outdoor antenna:
The diameter of the pole for omnidirectional outdoor antennas is required to be 35mm ~ 50mm. A typical case is to use the 50mm-diameter round-steel-made pole
(with details depending on the specific antenna type). Make sure that the top of pole and the clamp beneath the antenna are at the same level, after installing the omnidirectional outdoor antenna on the pole. Make sure that the antenna is high enough to meet the coverage requirement, and that the antenna top falls within the 45 degrees safety angle towards the lightening rod, as shown in Figure 4-22. In principle, no lightening rod can be welded to pole 25 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx
(no metal object is allowed within 1m of the horizontal direction of the omnidirectional antennas), when installing the omnidirectional antennas. Instead, an independent lightening rod should be settled between the two poles, where the lightening rod must be high enough to keep all antennas under its protection cover. Figure 4-22 Omnidirectional Antenna Installation (1) In case is impossible to install an independent lightning rod due to environmental limitations, the installation method shown in Figure 4-23 can be used. Be aware that the pole supporting the lightening rod should be kept at least 1m away from the omnidirectional outdoor antennas. Figure 4-23 Omnidirectional Antenna Installation (2) 26 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 4.7.2 Install Directional Antennas 1. First, assemble the antennas, as shown in Figure 4-24. Figure 4-24 Assembling Procedure of Directional Antennas 2. To install it on the iron tower, use a pulley to transport the antenna assembled to the platform on the iron tower, as shown in Figure 4-25. Following the safety rules when working at these heights. Figure 4-25 Transportation the Antennas in the Height 3. Fix the pole vertically to the ground or concrete pillars on the rooftop using expansion screws, and fasten it with steel wires. Then, mount the directional outdoor antenna onto the pole using the installation rack, as shown in Figure 4-26. 27 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Figure 4-26 Directional Antenna Installation 4. When the base station has been installed in a proper position, connect all the cables and wires. 5. Run tests, then seal and weatherproof all the connections after the testing has successfully completed. Refer to 3.5 Weatherproof Protection. 28 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx 5. Power On Power on the mBS1100, and the indicators will light up, as shown in Figure 5-1. Figure 5-1 LED Indicators The explanation of the indicator signal is given in Table 5-1. Table 5-1 mBS1100 Indicator Description Type Color Status Meaning PWR Green ON OFF Have power input No power input Fast blink: 0.125s on, 0.125s off Single board loading RUN Green Slow blink: 1s on, 1s OFF OFF ON OFF ON OFF ALM Red ACT Green Single board running well No power input, or single board failure Hardware warning status, e.g., cable connection failure warning No warning Active cell Inactive cell 29 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx Appendix A Additional Information A.1 Antenna Information The following is a list of antennas that are certified for use. Customers can choose different antennas according to the environment. Table 5-2 Antenna Information Antenna Type Manufacturer Model Number Antenna Max Gain(dBi) External Planar Kenbotong Technology KBT90DP16-3338 Antenna Dual Pole Co., Ltd. AT0 External Planar Kenbotong Technology KBT90DP14-3338 Antenna Dual Pole Co., Ltd. AT0 External Planar Baicells Technologies ANT-3G11-R-65-E Antenna Dual Pole Co., Ltd DT0 External Planar Baicells Technologies ANT-3G7-R-65-ED Antenna Dual Pole Co., Ltd T0 16 14 11 7 External Omnidirectional Antenna Single Pole External Omnidirectional Antenna Single Pole External Omnidirectional Antenna Single Pole Kenbotong Technology Co., Ltd. TQJ-3500AC10 10 Kenbotong Technology Co., Ltd. TQJ-3500AC7 7 Kenbotong Technology Co., Ltd. TQJ-3500AT6A 6 30 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx A.2 Maximum Output Power The maximum output power can be set as follows:
Antenna Max 10Log(Number Gain (dBi) of antennas) Channel BW Max output EIRP
(MHz) power
(dBm)
(dBm) 3 16 14 11 7 10 7 6 10 20 10 20 10 20 10 20 10 20 10 20 10 20 21 24 23 26 26 29 30 33 27 30 30 33 30 33 40 43 40 43 40 43 40 43 40 43 40 43 39 42 A.3 Regulatory Compliance FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital 31 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 50 cm between the radiator & your body. 32 Baicells mBS1100 Base Station Installation Guide(V100R001C00,03).docx IC Compliance This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le Brouillage est susceptible d'en compromettre le fonctionnement. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 50 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. 33
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-01-25 | 3660 ~ 3690 | TNB - Licensed Non-Broadcast Station Transmitter | Class II permissive change or modification of presently authorized equipment |
2 | 2016-06-01 | 3660 ~ 3690 | TNB - Licensed Non-Broadcast Station Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2017-01-25
|
||||
1 2 |
2016-06-01
|
|||||
1 2 | Applicant's complete, legal business name |
Baicells Technologies Co., Ltd.
|
||||
1 2 | FCC Registration Number (FRN) |
0025156423
|
||||
1 2 | Physical Address |
3F, Hui Yuan Development Building, No.1 Shangdi
|
||||
1 2 |
Beijing, N/A
|
|||||
1 2 |
China
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
s******@nemko.com
|
||||
1 2 | TCB Scope |
B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2AG32
|
||||
1 2 | Equipment Product Code |
MBS1100
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B****** H****
|
||||
1 2 | Telephone Number |
+86-0********
|
||||
1 2 | Fax Number |
+86-0********
|
||||
1 2 |
h******@baicells.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | LTE-TDD Base Station | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Yes | |||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is EIRP. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna colocation requirements of §1.1307(b) (3). Class II permissive change. | ||||
1 2 | Output power listed is EIRP. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna colocation requirements of §1.1307(b) (3). | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Shenzhen Zhongjian Nanfang Testing Co.,Ltd
|
||||
1 2 | Name |
B**** Z********
|
||||
1 2 | Telephone Number |
86-75********
|
||||
1 2 | Fax Number |
86-75********
|
||||
1 2 |
b******@ccis-cb.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 9 | MO UR | 3655 | 3695 | 7.396 | 0.04 ppm | 9M06G7D | |||||||||||||||||||||||||||||||||
1 | 2 | 9 | MO UR | 3655 | 3695 | 7.516 | 0.04 ppm | 9M05W7D | |||||||||||||||||||||||||||||||||
1 | 3 | 9 | MO UR | 3660 | 3690 | 14.388 | 0.04 ppm | 17M9G7D | |||||||||||||||||||||||||||||||||
1 | 4 | 9 | MO UR | 3660 | 3690 | 14.997 | 0.04 ppm | 17M9W7D | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 9 | MO UR | 3655 | 3695 | 7.396 | 0.04 ppm | 9M06G7D | |||||||||||||||||||||||||||||||||
2 | 2 | 9 | MO UR | 3655 | 3695 | 7.516 | 0.04 ppm | 9M05W7D | |||||||||||||||||||||||||||||||||
2 | 3 | 9 | MO UR | 3660 | 3690 | 14.388 | 0.04 ppm | 17M9G7D | |||||||||||||||||||||||||||||||||
2 | 4 | 9 | MO UR | 3660 | 3690 | 14.997 | 0.04 ppm | 17M9W7D |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC