WiPG-1000P Quick Installation Guide Version: 2.0 Date: September 19, 2016 1. Package Contents wePresent WiPG-1000P Box wePresent USB Token Power Adapter (DC +5V, 2.6A) 2 WiFi Antennas Quick Installation Guide Wall Mount Kit Warranty Card CE DoC 2. USB Token Contents MirrorOp Installer for Windows MirrorOp Installer for Mac Executable MirrorOp Application for Windows Executable MirrorOp Application for Mac SVS Driver (For Mac Extended Screen) SNMP MIB File User Manual 3. Physical Details Front Panel Power Button and LED USB Port (Front) Power On/Off Button. LED Indicator: System Loading(Red), Ready(Green) 2 USB Ports for USB Mouse and Keyboard wePresent WiPG-1000P Rear Panel Antenna USB Port (Rear) RJ-45 VGA HDMI Audio Jack Power Jack Bottom Side WiFi Antenna USB Port for USB IWB Device (HID Type) 10/100M RJ-45 Port VGA Connector HDMI Connector Audio Jack (3.5mm) Power Jack (5V/2.6A) Press the Reset button and the Power button on the device to execute hardware reset. Reset Button wePresent WiPG-1000P 4. What You Might Need Projector/Display with VGA/HDMI Interface Windows or Mac PC/Laptop Apple iPhone, iPad or iPod Touch Android Phone or Tablet Speaker (Optional, for Audio Projection Feature) USB Mouse and Keyboard (Optional, for Remote Desktop USB HID IWB Device (Optional, for IWB over IP Feature) Feature) 5. Quick Installation 1) Connect WiPG-1000 device to the projector/display through the VGA/HDMI port and turn on the projector/display power. 2) Connect the power adaptor to the WiPG-1000 device and press the Power button to turn on the WiPG-1000 device. The system will be ready when the LED light turns green. The default standby screen as shown below will be displayed when the system is ready. 3) Insert the speaker cable to the WiPG-1000 audio jack for audio output (Optional when using VGA). wePresent WiPG-1000P 4) Insert the USB mouse or keyboard/USB touch device to the WiPG-1000 front USB port for on-screen display (OSD) control. (Optional) 5) The MirrorOp app for iOS and Android can be downloaded from the iOS App Store or Google Play Store. 6. Windows Do Not Support Windows Phone, Windows RT 6.1 Install the application 1) Make sure your PC is WiFi-enabled, and connect your PC to the wePresent WiPG-1000 box through WiFi. You can find the WiFi network name (SSID) of your WiPG-1000 box on the standby screen of the projector/display. [Default SSID is WiPG-1000]
2) Open your browser, and enter the IP address of your WiPG-
1000 box in the address bar of the browser. You can find the IP address on the standby screen of the projector/display.
[Default IP address is 192.168.100.10]
wePresent WiPG-1000P 3) Download the wePresent software (i.e. MirrorOp) for Windows 7/8/10, and follow the Setup Wizard to install the software. (You can also install the MirrorOp software from the USB token directly.) Make sure the software is not blocked by your firewall. wePresent WiPG-1000P 6.2 Start the application 1) Click the MirrorOp icon on the desktop to execute the application, or launch the application from the USB token directly. (You can find the MirrorOp application in the USB drive.) 2) It will start to search for the wePresent WiPG-1000 receiver automatically. 3) Click on the WiPG-1000 device and enter the login code shown on the display. wePresent WiPG-1000P 4) Click the PLAY button to start the screen sharing. 7. Mac 7.1 Install the application 1) Make sure your Mac is WiFi-enabled, and connect your Mac to the wePresent WiPG-1000 box through WiFi. 2) Open your browser, and enter the IP address of your WiPG-
1000 box in the address bar of the browser. You can find the IP address on the standby screen of the projector/display.
[Default IP address is 192.168.100.10]
wePresent WiPG-1000P 3) Download the software for Mac 10.7~10.10, and you will see a DMG file with a MirrorOp icon
. 4) Drag the MirrorOp icon into the Applications folder. 7.2 Start the application 1) Click on the MirrorOp icon to execute the application. from the Applications folder 2) It will start to search for the wePresent WiPG-1000 receiver automatically. wePresent WiPG-1000P 3) Click on the WiPG-1000 device and enter the login code shown on the display. 4) Click the PLAY button to start the screen sharing. wePresent WiPG-1000P 8. Safety Information
< Federal Communications Commission (FCC) Statement >
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly wePresent WiPG-1000P approved by the party responsible for compliance could void the users authority to operate the equipment.
< FCC RF Radiation Exposure Statement >
This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Caution:
Operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Please note that high-power radars are allocated as primary users (i.e. Priority users) of the bands 5250-
5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. wePresent WiPG-1000P Canada This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Informations concernant lexposition aux frquences radio (RF) Le produit est conforme aux limites dexposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un wePresent WiPG-1000P fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si lappareil peut tre conserv aussi loin que possible du corps de lutilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. The device shall automatically discontinue transmission in cases of absence of information to transmit, or operational failure. Note that this is not intended to prohibit transmission of control or signalling information or the use of repetitive codes where required by the technology. The device for operation in the band 51505250 MHz is only for indoor use to reduce the potential for harmful interference to co-
channel mobile satellite systems;
This device is restricted to indoor use. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. CAN ICES-3 (B)/NMB-3(B) The Country Code Selection feature is disabled for products marketed in the US/Canada wePresent WiPG-1000P
. This radio transmitter (9393B-WP1KP16) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. No. Model Ant. Type Ant. Connector Gain (dBi) Remark 1 2 AN2450-
4828RS Dipole SMA Male Reverse 2 2 2.4GHz /
5GHz 2.4GHz /
5GHz Le prsent metteur radio (9393B-WP1KP16) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal et l'impdance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur. No. Model Ant. Type Ant. Connector Gain (dBi) Remark AN2450-
4828RS Dipole SMA Male Reverse 2 2 2.4GHz /
5GHz 2.4GHz /
5GHz 1 2 WiPG-1000P Version: 2.0 Date: September 19, 2016 wePresent WiPG-1000P 1. wePresent WiPG-1000P wePresent
(DC+5V,2.6A) 2 CE DoC 2. Windows Installer (Windows ) MAC Installer (Mac ) MirrorOp (Windows) MirrorOp (Mac) VDD Driver (Windows XP/Vista ) SVS Driver (Mac ) SNMP User Manual () 3. USB LED USB wePresent WiPG-1000P USB () VGA HDMI
- : 0~40
- : 5V 2.6A WiFi USB (HID) 10/100M VGA HDMI
(3.5mm)
(5V) wePresent WiPG-1000P 4.
/ VGA/HDMI Windows Mac /
Apple iPhoneiPad iPod Touch Android Phone Tablet
() USB () USB HID ( UMT ) 5. 1) wePresent WiPG-1000 VGA/HDMI /
/
2) WiPG-1000WiPG-1000 LED
/
3) WiPG-1000 (VGA
) 4) USB/USBWiPG-1000 USB
() wePresent WiPG-1000P 6. Windows Windows Phone, Windows RT 6.1 1) WiFi wePresent WiPG-1000/
WiFi(SSID) 2) IP IP (
WiPG-1000, IP 192.168.100.10) 3) Windows (
wePresent) wePresent WiPG-1000P 6.2 1) MirrorOp wePresent
( USB ) 2) WiPG-1000 wePresent WiPG-1000P 3) WiPG-1000 4) 7. Mac 7.1 1) WiPG-1000 2) IP IP (WiPG-
1000, IP 192.168.100.10) wePresent WiPG-1000P 3) Mac DMG 4) wePresent WiPG-1000P 7.2 1) MirrorOp wePresent(USB) 2) WiPG-1000 3) WiPG-1000 wePresent WiPG-1000P 4) wePresent WiPG-1000P 8.
< NCC >
1. 2. 3. 4. MPEMPEMPEMPE
((((
MPEMPEMPEMPE 1mW/cm2222 0.02990 mW/cm2222)))) 1mW/cm 0.02990 mW/cm 1mW/cm 1mW/cm 0.02990 mW/cm 0.02990 mW/cm