PRODUCT BRIEF | Wi-Fi BM-LDS601 SimpleLink WiFi Module for IoT The Internet of Things Made Simple. Applications For Internet-of-Things applications, such as:
Cloud Connectivity Internet Gateway Home Automation Home Appliances Smart Plug and Metering Access Control Wireless Audio Security Systems IP Network Sensor Nodes IP Network Sensor Nodes Medical and Healthcare Smart Appliances Dimensions(mm) W H L W 30.00.5 L H 20.00.2 2.750.2 BM-LDS601 System Architecture Chip Antenna u.FL Connector Antenna Switch CC3200 SimpleLink Wi-Fi 8Mbit Serial Flash 32kHz 40MHz BM-LDS601 3.3V ADC SPI UART GPIO I2C I2S JTAG/SWD nRESET Features Dimension : 20.0 X 30.0 X 2.75mm 2.4GHz IEEE 802.11b/g/n transceiver Standalone SimpleLink Wi-Fi Networking module with an Integrated Application ARM Cortex-M4 Small, compact surface-mount module On-board ceramic chip antenna and U.FL connector for external antenna Multiple serial interface : UART, I2C, SPI, I2S Wi-Fi Network Processor Subsystem
- Wi-Fi and Internet Protocols in ROM
- TCP/IP Stack Industry-Standard BSD Socket Application Programming Interfaces (APIs) 8 Simultaneous TCP or UDP Sockets 2 Simultaneous TLS and SSL Sockets
- Powerful Crypto Engine for Fast, Secure Wi-Fi and Internet Connections with 256-Bit AES Encryption for TLS and SSL Connections
- Station, AP, and Wi-Fi Direct Modes
- WPA2 Personal and Enterprise Security
- SimpleLink Connection Manager for Autonomous and Fast Wi-Fi Connections
- SmartConfig Technology, AP Mode, and WPS2 for Easy and Flexible Wi-Fi Provisioning
- TX Power
+16.0 dBm @ 1 DSSS
+12.5 dBm @ 54 OFDM
+11.5 dBm @ MCS7
- RX Sensitivity 92.5 dBm @ 1 DSSS 72.5 dBm @ 54 OFDM 70.5 dBm @ MCS7 Applications Microcontroller Subsystem
- ARM Cortex-M4 Core at 80 MHz
- Embedded Memory - RAM (Up to 256KB), External Serial Flash Bootloader, and Peripheral Drivers in ROM
- Up to 27 Individually Programmable, Multiplexed GPIO Pins Copyright 2014, BARUN ELECTRONICS Incorporated Note: Information in this brief is subject to change without notice. PRODUCT BRIEF | Wi-Fi BM-LDS601 Specifications Features WLAN Radio Frequency Band WLAN Roles Wi-Fi Security Network Protocols Spec 802.11b/g/n 2.4GHz, Channel CE 1-13, FCC 1-11 Station, AP for Configuration, Wi-Fi Direct Open, WEP, WPA, WPA2 IPv4, TCP, UDP, RAW, ARP, DHCP, DNS, ICMP, mDNS, DNS-SD, HTTP 1.0 Web Server Network Security SSL3.0, TLS1.2, HTTPS Communications Interfaces SPI, UART, I2C, I2S(McASP) RF Transmit Power Receive Sensitivity Power Consumption
+16.0dBm@11Mbps
+12.5dBm@54Mbps
+11.5dBm@MCS7
-92.5dBm@1Mbps
-72.5dBm@54Mbps
-70.5dBm@MCS7 278mA@1Mbps Transmit with max Power 229mA@54Mbps Transmit with max Power 59mA@Receive 15.3mA@Listen 85uA@Deep sleep 4uA@Hibernate 520uA@Idle Connection Supply Voltage 3.3V Temperature Range
-40 to 85 BM-LDS601 Evaluation Board This version of the Evaluation Board is based on pre-
production Module, which can be used for evaluation and software development. USB interface to PC for CCS/IAR using FTDI USB drivers Flash update over the USB using SimpleLink Programmer Standalone development platform featuring sensors and LEDs Operates from 2 AA alkaline batteries On-board antenna and U.FL connector selectable using RF Switch Supports 4 wire JTAG and 2 Wire SWD Module
: (jameskim@bec.co.kr) : (Jaeyoul@bec.co.kr) Office : 031-8020-6083 Office : 031-8020-6071 Mobile : 010-9825-4051 Mobile : 010-8827-5202 548, Zip.445-812, www.bec.co.kr Copyright 2014, BARUN ELECTRONICS Incorporated Note: Information in this brief is subject to change without notice. FCC Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. This device must not be co-located or operating in conjunction with any other antenna or transmitter. End Product Labeling The module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and IC Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:
Contains FCC ID: 2ADD8BM-LDS601 Copyright 2014, BARUN ELECTRONICS Incorporated Note: Information in this brief is subject to change without notice.