Chipper BT User Manual

Chipper BT Bluetooth Magstripe and EMV Card Reader Support Operating System:

iOS, Android, Windows Phone 8, MS Windows www.bbpos.com Package Contents Device USB cable Lanyard Quick start guide X1 X1 X1 X1 Application Download & Installation This device can support iOS (iOS 6.0 or above), Android (Android 2.1 or above), Windows Phone 8 & MS Windows. Quick Start Procedures STEP 2 Turn on the device pairing function of your smartphone/tablet. Then, press to turn on the Chipper BT.

**Please ensure that Bluetooth function of your smartphone/tablet is ON before device pairing. Bluetooth ON 1. Please visit APP Store or Google Play Store to download the ocial application before operation . 2. Please follow APP instructions to register and login for proper operation. 3. For any questions, please contact the ocial application developer. STEP 3 Select Chipper BT in the Scanned Device List on your smartphone/tablet. Then, your Chipper BT is connected and green LED will ON. Scanned Device List STEP 4 You can follow your application instruction to start the transaction process, then swipe/insert card to complete the transaction.

**If your Chipper BT cannot be successfully paired with your device, please access the Setting screen on your phone to choose BT Chipper in device list to pair accordingly.**

Index & Accessories (Fig.1) Quick Start Procedures For magstripe card reading For EMV card reading LED Light Lanyard holder Power button reset button Micro USB port for charging operation STEP 1 Connect Micro USB charging cable to charge the device as shown to the right. APP DOWNLOAD Download the ocial application from APP Store or Google Play Store.

** Chipper BT is powered by an internal Lithium Polymer rechargeable battery pack that cannot be removed or replaced. Before rst use, charging is required for approximately two to three hours. To prevent potential electrical damage to the Chipper BT , please be recommended to use the Micro USB cable provided with the packaging only.**

Cautions & Important Notes Ensure to turn on the Bluetooth function of your smartphone or tablet before use. Please fully charge your Chipper BT before use. Please ensure magstripe/EMV chip of the card is facing the right direction when swiping or inserting card. Dont drop, disassemble, tear, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign object into the device. Doing any of which will void the Warranty. Dont immerse the device into water and place near washbasins or any wet locations. Dont spill any food or liquid on the device. Dont attempt to dry the device with external heat sources, such as microwave or hair dryer. Dont use any corrosive solvent or water to clean the device. Recommend using dry cloth to clean the surface only. Dont use any sharp tools to point the internal components or connectors, doing which may lead to malfunction and void the Warranty. Dont try to disassemble the device to repair. Please contact your dealer for repair and maintenance. Product Specications Functions Communication Interface Power & Battery Charging Swipe Speed LED Indicator Support Operating System Product Size Product Weight Operating Temperature Operating Humidity Storage Temperature Storage Humidity EMV/PBOC Chip Card Reader

(ISO 7816 Compliant Class A, B, C card) Magnetic Stripe Card Reader Dual tracks (track 1 & 2 or track 2 & 3) Bluetooth 4.2, USB Lithium polymer rechargeable battery 190mAH, 3.7V Via micro USB 15cm - 100cm/sec All LEDs o - button release to power down Red LED on - device starting up / charging battery Red LED o - fully charged Red LED ashing - low battery / critical low battery Green LED on - bluetooth is connected Green LED ashing - standby mode / waiting for connect bluetooth or bluetooth is disconnected Android 4.1, iOS 7.0, Windows Phone 8, MS Windows 61.8mm (W) x 44.5mm (H) x 14.2mm (D) 29.8g 0C 45C (32F 113F) Max 95%

-20C 55C (-4F 131F) Max 95%

Troubleshooting Problems Device cannot be paired Device cannot read your card successfully Device lost the connection with your smartphone or tablet when the device is auto-o. Device does not work with your phone or tablet Device cannot read your card successfully Recommendations Please press the power on button to restart your device. Please check if you can nd the devices Serial Number

(Shown on the back of device) in the Scanned Device List of your smartphone or tablet. Please press the power on button to turn on the device again. The device will automatically connect with your smartphone or tablet again. The device may be at lower battery level, please use the USB cable to recharge it, then retry. Please ensure the device or smartphone/tablet is within the reception range. Please press the power on button to turn on the device again. The device will automatically connect with your smartphone or tablet again. The device may be at lower battery level, please use the USB cable to recharge it, then retry. Please ensure the device or smartphone/tablet is within the reception range. Please ensure the Bluetooth function of your smartphone or tablet is turned on. Please check the version of your operating system is supported for this devices operation. Please check if the device has power when operating and ensure devices are connected. Please check if the application instructs to swipe or insert card. Please ensure there is no obstacle in the card slots. Please check if the magstripe or chip of the card is facing the right direction when swiping or inserting card. Please ensure your phone/tablet is supported model for this devices operation. Please swipe or insert card with a more constant speed. Device has no response Please use a paper clip to press the reset button at the bottom for reboot. Warranty Any damage or defects caused by a failure to follow the instruction which relate to this device or as the result of an accident, abuse, misuse, misapplication, product modication, improper voltage or current, acts of God, shipping damages or loss, or damage caused by service performed by anyone other than our company are expressly excluded from the warranty stated below. We are not under any obligation to support the device for all operating environments, including but not limited to, interoperability with all current and/or future versions of software or hardware. Please contact the dealer for any warranty or customer support services. FCC/ISED Caution Statements:

FCC Suppliers Declaration of Conrmity BBPOS / Chipper BT (CHB70) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. BBPOS Corp. 2033 Gateway Place, 5th FLR, San Jose, CA 95110 www.bbpos.com NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Need Help?

E: sales@bbpos.com | T: +852 3158 2585 BBPOS Ltd. www.bbpos.com Rm 1903-04, 19/F, Tower 2, Nina Tower, No. 8 Yeung Uk Rd, Tsuen Wan, H.K. 2017 BBPOS Limited. All rights reserved. BBPOS and Chipper are either trademark or registered trademarks of BBPOS Limited. iOS is the trademark of Apple Inc. Android is a trademark of Google Inc. Windows is registered trademark of Microsoft Corporation in the United States and/or other countries. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BBPOS Limited is under license. Other trademarks and trade names are those of their respective owners.All details are subject to change without prior notice. Revise v.9 / 20191126