SimplyPrintTM Mobile bluetooth printer Support Operating System:
Index Paper Feeding Button Bluetooth Pairing Button Power ON/ OFF Button LED Indicators Printer Cover Package included i. ii. iii. iv. v. Device SimplyPrint Bluetooth Printer x 1 Thermal Paper Roll (Diameter: 30 mm maximum) x 1 Metal Belt Clip x 1 and Screw x 1 USB Cable x 1 DC Adaptor x 1 LED Indicators:
Power ON - green light ON Battery Status
Lo-Battery - red light FLASHING
Charging - red light ON
Fully Charged - green light ON Bluetooth Status
Pairing - blue light FLASHING
Paired - blue light ON
Error: (cover opened/ no paper)- red light FLASHING Micro USB port Thermal Printer Head Metal Belt Clip Screw of Belt Clip Quick Start Guide IMPORTANT: Please fully charge the printer before first use. Please recharge the printer again when the printer is not in use for a long period of time, since battery will slowly discharge. We recommend user to turn off the printer when it is not in use. If the printer is operated at low temperature, the battery performance will temporarily decline. Please remember to fully and frequently charge the printer. STEP 1:
Use the provided USB cable to fully charge the SimplyPrint before first use (fig. 1). STEP 2:
A. Insert the paper roll in the compartment (fig. 2). B. Ensure to close the cover tightly and properly. Otherwise, the error red light will be FLASHING after the device is powered on (fig. 3). A fig. 2 fig. 1 B fig. 3 Quick Start Guide STEP 3:
A. Press & hold button once, then the green LED will turn on (fig. 4). B. Press & hold button for paper feeding. STEP 4:
A. Connecting device using Bluetooth 2.1 -
press & hold button until blue light flashes to start the pairing mode (fig. 5). B. Connecting iOS devices using BLE - the printer will automatically start the searching proces after printer is powered on. Connect the printer from the scanned device list of your smartphone/ tablet, then, the blue light will be ON continuously and is ready for use. When the device is low powered, the red light will be flashing. Please connect the USB power to recharge the printer and the red light will be ON when charging. After the printer is fully-charged, the green light will be ON (fig. 6). Specifications Specifications & Important Important Buttons Power on/off button, bluetooth pairing button
& paper feeding button Communication Interface Bluetooth 4.0 /BLE Thermal Printer
- Printing method Thermal dot line printing fig. 4
- Printable dots per line 384 dots
- Resolution
- Dot pitch
- Print Speed Width 8 dots/mm x Height 16 dots/ mm (WxH) Horizontal: 0.125 mm, Vertical: 0.125 mm 50 mm/ sec
- Paper Specificaitons Width: 58 mm/ 2 inch, Material: 58g thermal paper, Paper lengtj: 7 (+/- 0.2m) fig. 5
- Paper Roll Diameter Maximum 30 mm
- Effective Printing Width 48 mm
- Sensor LED indicator Paper end & Cover open sensor, low battery sensor 4 LEDs: Power On, Charging/ Low Battery status, Bluetooth status, Error Power & Battery Lithium-ion rechargeable battery 2200 mAh, 3.7V Charging Via micro USB, 3.5 hours to be fully charged fig. 6 Operating Temperature 0C 45C (32F 113F) Operating Humidity Maximum 95%
Storage Temperature
-20C 45C (-4F 113F) Storage Humidity Software Support Certifications Dimensions Weight Maximum 95%
Android 2.1 or above, iOS 4.3 or above, Windows Phone 8, Windows 8 CE, FCC, RoHS 79.2 x 104.8 x 51.8 mm (approx.) 3.12 x 4.13 x 2.04 inches (approx.) Main unit - 226 g (approx.), Thermal paper - 28 g (approx.) CAUTIONS:
1. Dont drop or use any hard object to hit the product. Dont open the cover when the product is in printing mode. Before you open the cover, please ensure the product stop printing. Turn off the printer if you are not using the product. 2. Dont pull out the paper when the cover is closed. Please ensure that the paper roll is placed properly before the cover is closed. Dont use metal objects, sandpaper or sharp tools to touch the heating element and driver IC. Dont touch the thermal head heating element, which may affect printing quality. 3. 4. 5. 6. 7. 8. 9. Dont open or disassemble the product, which will void product warranty and may damage the product. Dont operate the product when there is moisture (caused by condensation) on the front surface of thermal head. Dont feed wrong sized thermal paper or paper containing (Na+,K+, Cl-). It may affect printing quality and life of the thermal head. Please use the thermal paper which complies with specific requirements/ specifications. Place the product or thermal paper in a cool, dry and dark location. Dont let plastic film, eraser or adhesive tape be in contact with the thermal paper for a long period of time. Dont use chemical glue on the thermal paper. It is not recommended to use the thermal paper stored for a long period of time. The printer has built-in lithium-ion battery. Since the requirements of disposal of batteries vary from country to country, please refer to the appropriate disposal method of your country. This device contains small parts (screw of the metal belt clip). Please keep the device out of children's reach. If the small part is swallowed, please consult your physician immediately. Don't immerse the device into water. This device is not water-proof or weather-proof. Don't put it close to the sink or dish washer. Don't clean it with water or corrosive solvent. Clean the device by using dry cloth only. Don't drop, tear or disassemble the device improperly, any misuse or improper use which will void the product warranty. Contact your dealer when your device malfunctions. IOS is the trademark of Apple Inc. Android is a trademark of Google Inc. All details are subject to change without prior notice. FCC Requirement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.