Index Power button Scan button Micro USB port Earphone jack 4 inches LCD display Secure PIN pad Fig.1- Front View LED indicator Volume +/-
NFC card reader Mic Function Keys WisePOS 2.0 Android based mPOS device Fig. 2 - Back View Magstripe card reader 5MP camera
& ash Speaker Charging contacts Fig. 3 - Internal View Magnetic head Battery connector Micro SIM card slot 1 Micro SIM card slot 2
(optional) Battery compartment Quick Start Guide IMPORTANT:
Push & slide to open the back cover of WisePOS 2.0 to insert the rechargeable battery into the battery compartment, Micro SIM cards and SAM cards to card slots properly, then lock the cover again for battery charging via USB cable before use. Step 2:
Please follow the instructions of app to login and input amount to start the transaction process. Account Login Input Amount
$XX.00 2 Micro SIM card 1 Micro SIM card 2 SAM card 4 1 3 Battery Step 3:
Please follow the instructions to swipe, insert or tap your payment card. SAM card slot x 2 Battery cover C R E M D CAUTION:
Please dont point or damage the internal components when the back housing is opened. Any intentional damages may void the warranty and cause device malfunction. Step 1:
Download the ocial APP from APP Store. S e i n m c b e e r 1 0 1 0 C 0 a 0 V F r a li I T C r m o d d 0 h 0
/
0 2 A o 2 0 l 0 d V R T a li h 0 D Download APP e r d u r 0 N 0
/
0 X a m 0 X X e X 5 5 2 2 C a r d h o l d e r N a m e i S n c e M e m b e r 0 0 l i d V a F r o m 0 0
/
0 0 T h r u V a l i d 0 0
/
0 0 C R E D I T C A R D 1 1 0 0 2 2 0 0 X X X X 5 5 2 2 www.bbpos.com EMV card reader Package Contents Device X1 USB cable X1 Rechargeable battery X1 Quick start guide X1 Cautions & Important Notes Product Specications Troubleshooting Ensure to download the ocial APP from APP Store. Please fully charge your WisePOS 2.0 before use. Please ensure magstripe /EMV chip of the card is facing the right direction when swiping or inserting card. Dont drop, disassemble, tear, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint, or insert foreign object into the device. Doing any of which will void the Warranty. Dont immerse the device into water and place near washbasins or any wet locations. Dont spill any food or liquid on the device. Dont attempt to dry the device with external heat sources, such as microwave or hair dryer. Dont use any corrosive solvent or water to clean the device. Recommend using dry cloth to clean the surface only. Dont use any sharp tools to point the internal components or connectors, doing which may lead to malfunction and void the Warranty. Dont try to disassemble the device to repair. Please contact your dealer for repair and maintenance. Only suitable use for output DC 5V, 1000mA (max.) CE approval AC adaptor, other electrical rating of AC adaptor is prohibited. Product Specications Functions LED Indicator Display Operation System Processor Memory & Storage Camera EMV chip card reader (ISO7816 compliant class A, B, C card) Triple track magnetic stripe card reader NFC card reader (EMV contactless, ISO 14443A/B) High speed 1D barcode scanner (optional) Secure PIN pad Over-the-air rmware update Over-the-air cryptographic-key loading Green light On - fully charged Green light Flashing - during transaction Red light On - battery charging Red light Flashing - Operating at low battery 4 full color WVGA TN display, cap sense touch panel Android 7.0 MT6737 2GB RAM, 16GB Flash 5MP main camera with LED ash Problems Device cannot read your card successfully Device cannot read your card successfully through NFC Device has no response Recommendations Please check if the device has power when operating and ensure devices are connected. Please check if the application instructs to swipe or insert card. Please ensure there is no obstacle in the card slots. Please check if the magstripe or chip of the card is facing the right direction when swiping or inserting card. Please swipe or insert card with a more constant speed. Please check if your card supports NFC payment. Please ensure that if your card is placed within 4 cm range on top of the NFC marking. Please take out your NFC payment card from wallet or purse for payment to avoid any interference. Please check if the rechargeable battery, SIM cards and SAM cards are properly inserted. Please check if the device is fully charged. Please restart the device for retry. Buttons Communication Interface Connectivity Power & Battery Charging Key Management Encryption Algorithm Swipe Speed Battery Life 10 numerical buttons, enter button, cancel button, power on/o button, volume +/-
button, backspace button, three functional/hot key buttons, barcode scan button Bluetooth 4.0, Micro USB (support OTG), WiFi, GPRS/3G/4G LTE, 3.5mm audio jack Dual mini SAM card, single or dual micro SIM card Lithium polymer rechargeable battery 3000mAh, 3.8V Via Micro USB or charging contacts DUKPT TDES 15cm - 100cm/sec Standby time: up to 185 hrs Above 500 EMV transactions, or above 1000 magnetic card swipe transactions, or above 400 EMV contactless transactions Operating Temperature 0C - 45C (32F - 113F) Operating Humidity Storage Temperature Storage Humidity Dimensions Weight Certications*
Maximum 95%
-20C - 55C (14F - 131F) Maximum 95%
70.5 x 155 x 17.8mm /
2.78 x 6.1 x 0.7inch (approx.) 240g / 8.1oz (approx.) PCI PTS POI v4.1 with SRED EMV Contact L1 & L2 EMV Contactless L1 VISA PayWave MasterCard PayPass AMEX Expresspay Discover Contactless D-PAS VISA Ready MasterCard TQM MasterCard Mobile POS Discover Network ZIP PBOC 3.0 L1 & L2 QPBOC 3.0 L1 & L2 FCC, CE, RoHS UnionPay QuickPass FCC Caution Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimetres between the radiator and your body. Specic Absorption Rate (SAR) information:
This WisePOS 2.0 meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientic organizations through periodic and thorough evaluation of scientic studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. Device types: WisePOS 2.0 (FCC ID: 2AB7X-WISEPOS2) has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the handset kept 10mm for body worn and 10mm for hotspot. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm for body worn and 10mm for hotspot. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm for body worn and 10mm for hotspot must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna. Caution Risk of explosion if battery is replaced by an inccorect type. Dispose of used batteries according to the instructions. Need Help?
E: sales@bbpos.com | T: +852 3158 2585 Room 1903-04, 19/F, Tower 2, Nina Tower, No. 8 Yeung Uk Road, Tsuen Wan, Hong Kong www.bbpos.com 2017 BBPOS Limited. All rights reserved. BBPOS and WisePOS are either trademark or registered trademarks of BBPOS Limited. iOS is the trademark of Apple Inc. Android is a trademark of Google Inc. Windows is registered trademark of Microsoft Corporation in the United States and/or other countries. The Bluetooth word mark and logos are registered trademark owned by Bluetooth SIG, Inc. and any use of such marks by BBPOS Limited is under license. Other trademarks and trade names are those of their respective owners. All details are subject to change without prior notice. Revise v.1 / 20171121