Roborock Robotic Vacuum Cleaner Manual Please read this manual carefully before using the product and keep it properly Security Information IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING (THISAPPLIANCE), Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. WARNING To reduce the risk of fire, electric shock, or injury:
Do not use outdoors or on wet surfaces Do not allow to be used as a toy. Close attention is necessary when used by or near children, pets or plants. Use only as described in this manual. Use only manufacturers recommended attachments Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Do not handle charger, including charger plug, and charger terminals with wet hands Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow. Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts. Do not use to pick up flammable or combustible liquids, such as gasoline, or use in areas where they may be present. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes. Do not use without dust bag. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents. For use only with Roborock CDZ02RR charger.Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips,coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. 1 Security Information Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130C may cause explosion. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. Have servicing performed by a qualified repair person using only identical replacement parts.This will ensure that the safety of the product is maintained. Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care. Place the cords from other appliances out of the area to be cleaned. Do not operate the vacuum in a room where an infant or child is sleeping. Do not operate the vacuum in an area where there are lit candles or fragile objects on the floor to be cleaned. Do not operate the vacuum in a room that has lit candles on furniture that the vacuum may accidentally hit or bump into. Do not allow children to sit on the vacuum. Do not use the vacuum cleaner on a wet surface. Risk Of Injury. Brush May Start Unexpectedly.Disconnect the main Brush Before Cleaning or Servicing. Do not use the product when the temperature is higher than 40 or lower than 4, or there is any liquid or sticky substance on the floor SAVE THESE INSTRUCTIONS Household use only. 2 Security Information IMPORTANTES MESURES DE S CURIT Lutilisation dun appareil lectrique demande certaines prcautions:
LIRE TOUTES LES INSTRUCTIONS AVANT DE FAIRE FONCTIONNER (CETAPPAREIL), Le non-respect des mises en garde et des instructions peut causer des chocs lectriques, des incendies et/ou des blessures graves. AVERTISSEMENT Pour rduire les risques dincendie, de choc lectrique ou de blessure:
Ne pas exposer la pluie, Ranger lintrieur. Ne pas permettre aux enfants de jouer avec lappareil. Une attention particulire est ncessaire lorsque l appareil est utilize par des enfants ou proximit de ces derniers. Nutiliser que conformment cette notice avec les accessories recommands par le fabricant. Ne pas utiliser si le cordon ou la fiche est endommag. Retourner lappareil un atelier de reparation sil ne fonctionne pas bien, sil est tomb ou sil a t endommag, oubli lextrieur ou immerg. Ne pas tirer soulever ni trainer lappareil par le cordon. Ne pas utiliser le cordon comme une poigne, le coincer dans lembrasure dune porte ou lappuyer contre des artes vives ou des coins. Ne pas faire rouler l appareil sur le cordon. Garder le cordon lcart des surfaces chaudes. Ne pas dbrancher en tyrant sur le cordon. Tirer plutt la fiche. Ne pas manipuler le chargeur, y compris la prise du chargeur, et les bornes du chargeur avec les mains mouilles Ninsrer aucun objet dans les ouvertures. Ne pas utiliser lappareil lorsquune ouverture est bloque. S assurer que de la poussire, de la peluche, des cheveux ou dautres matires ne rduisent pas le debit dair. Maintenir les cheveux, les vtements amples, les doigts et toutes les parties du corps lcart des ouvertures et des pieces mobiles. User de prudence lors du nettoyage des escaliers. Ne pas aspirer des liquids inflammables ou combustibles, comme de lessence, et ne pas faire fonctionner dans des endroits o peuvent se trouver de tells liquides. Ne pas aspirer de matires en combustion ou qui dgagent de la fume, comme des cigarettes, des allumettes ou des cendres chaudes. Ne pas utiliser lappareil si le sac poussire ou le filter nest pas en place. 3 Security Information Emcher une mise en marche accidentelle. Sassurer que linterrupteur est la position arrt avant de raccorder la batterie, de lever ou de dplacer lappareil. Transporter lappareil en gardant un doigt sur linterrupteur, ou mettre sous tension un appareil dont linterrupteur est la position marche peut causer un accident. Pour emploi seulement avec Roborock CDZ02RR chargeur.Recharger uniquement avec le chargeur prescrit par le fabricant. Un chargeur convenant un type de batterie peut prsenter un risque dincendie lorsquil est utilis avec une autre batterie. Utiliser uniquement les batteries recommandes pour lappareil. Lutilisation dautres types de batteries peut prsenter un risque de blessure ou dincendie. Lorsque lappareil nest pas utilis, tenir la batterie loin dobjets mtalliques comme des trombones, des pices de monnaie, des cls, des clous, des vis ou autres petits objets qui pourraient tablir une liaison entre les bornes. Un courtcircuit des bornes des batteries peut causer des brlures ou un incendie. En condition dusage abusif, du liquide peut schapper de la batterie ; viter tout contact avec ce liquide. En cas de contact accidentel, rincer abondamment avec de leau. En cas de contact avec les yeux, consulter galement un mdecin. Le liquide projet peut causer des irritations ou des brlures. Ne pas utiliser une batterie ou un appareil endommag ou qui a t modifi. Des batteries endommages ou modifies peuvent avoir un comportement imprvisible pouvant causer un incendie, une explosion ou un risque de blessure. Ne pas exposer une batterie ou un appareil la flamme ou des tempratures excessives. Lexposition une flamme ou des tempratures suprieures 130 C peut causer une explosion. Respecter toutes les instructions de chargement et ne pas charger la batterie ou lappareil des tempratures qui ne sont pas incluses dans la gamme de tempratures indiques dans la notice dinstructions. Un chargement mal effctu. Confier les rparations une personne qualifie qui utilisera uniquement des pices de remplacement identiques. Cette faon de faire garantira la scurit du produit. Ne pas modifier ni tenter de rparer lappareil ou la batterie sauf comme il est indiqu dans les instructions dutilisation et dentretien. loigner les cordons dautres appareils de la zone nettoyer. 4 Security Information Ne pas utiliser laspirateur dans une pice o un nourrisson ou un enfant dort. Ne pas utiliser laspirateur dans un endroit o il ya des bougies allumes ou des objets fragiles sur le plancher nettoyer. Ne pas utiliser laspirateur dans une pice o il ya des bougies allumes sur les meubles que laspirateur peut heurter ou se cogner accidentellement. Ne pas laisser les enfants sassoir sur laspirateur. Ne pas utiliser laspirateur sur une surface mouille. Risque de blessures. La brosse motorise peut se mettre en marche dune manire imprvue. Dconnecter la brosse principale avant le nettoyage ou le service. Please do not use the product when the temperature is higher than 40 or lower than 4, or there is any liquid or sticky substance on the floor 5 Security Information This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, m me si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and 7 Security Information used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. MPE Requirements To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. 8 Security Information Les antennes installes doivent tre situes de facon ce que la population ne puisse y tre expose une distance de moin de 20 cm. Installer les antennes de facon ce que le personnel ne puisse approcher 20 cm ou moins de la position centrale de l antenne. La FCC des ltats-unis stipule que cet appareil doit tre en tout temps loign dau moins 20 cm des personnes pendant son functionnement. Region Selection Limited by local law regulations, version for North America does not have region selection option. 9 Battery and Charging Please keep the dock charger away from heat (such as heating plates) The battery must be removed from the appliance before it is scrapped The appliance must be disconnected from the supply mains when removing the battery The battery is to be disposed of safely.Please do not discard waste batteries. Leave them to a professional recycling organization Do not wipe or clean the chargers shrapnel with a piece of wet cloth or wet hands Please make sure the cleaner is powered off in shipment and original packaging is advised If left unused for a long period, please store the cleaner in a cool and dry place after having it fully charged and switched off, charge it at least every three months to avoid the battery being over discharged Battery pack charging temperature Battery pack using temperature Battery pack storage temperature Storage(1month) Long Storage(3months) Long Storage(1year) 0~45
-20~60
-20~60
@Less than 70% RH
-20~45
@Less than 70% RH
-20 ~20
@Less than 70% RH 6
@Max Charging Current0.5C
@Max Discharge Current0.5C If the battery pack store at 25over the 3 months period, it should be recharged. Product Introduction Main Unit Cleaning On/Off Short press to start cleaning Press and hold to turn on or off Circular indicator light White: power 20%
Red: power 20%
Slow blinking: charging or launching Red flash: fault status Spot cleaning Short press to start regional cleaning Recharge Short press to start recharging Note:
Press any button to stop the robotic vacuum during cleaning, recharging, or spot cleaning Reset Wi-Fi Press the spot cleaning button and the recharge button at the same time for 3 seconds Open lid Bumper Cliff sensor Wall sensor Omni-directional wheel Charging contact pieces Side brush Main wheel Main brush Buckle of main brush cover LDS cover bumper sensor LDS*Laser distance sensor 10 Product Introduction Dust Bin Dust bin lid Dust bin buckle Filter Accessories Wi-Fi indicator light Slow blinking: Waiting to connect Fast blinking: Connecting Stable light: Wi-Fi is connected System Reset button Speaker Air vent Cleaning tool of main brush Water tank Mopping cloth Dock charger Moistureproof mat 11 Power cable Installation Plug the dock charger into the interface of the moistureproof mat, and make sure it's firmly installed. 3 Turn on and charge the machine Press and hold the button to turn on the main unit ,wait until the indicator light is on for a while ,then place the main unit on the dock charger to charge. This moistureproof mat can keep the floor dry Keep the dock charger on a level surface, flat against a wall, plug into power outlet. The color of the circular light indicator refers to the quantity of electricity White: power 20%
Red: power 20%
More than 0.5 meters More than 1.5 meters More than 0.5 meters Note: Robotic vacuum cleaner may not be powered on when battery is low, connect the robotic vacuum cleaner to the dock charger. Ensure to leave enough space to the dock charger
(0.5 meters on both sides, more than 1.5 meters in the front). It will cause unexpected power outages and/or dock charger displacement if the power cable is dragged by main unit accidentally due to disorganized placed. The dock charger indicator is on after it's plugged into power outlet, the indicator is off when main unit is being charged. 4 Connect to the mobile phone client Search "Mi Home" in the App Store or scan the QR code to download and install the mobile phone client. 12 Installation Wi-Fi indicator light Slow blinking: Waiting to connect Fast blinking: Connecting Stable light: Wi-Fi is connected Note:
Do not use the mopping module when no one is at home 2 Fill the water tank: Open the tank lid, fill it with water, and put back the tank lid. Note: If the mobile phone fails to connect to the cleaner, please refer to the "Instruction" - "Reset Wi-Fi" operation Scan to download the APP 5 1 Install the mopping module Install the mopping cloth: Wet the mopping cloth and wring it
. until it doesn't drip. Insert it into the bottom along the slot of the water tank and stick it firmly. 3 Install the module: Push in the module along the bottom of the main unit and follow the alignment mark on the mopping module. A click sound means it is installed properly. Note:In order to achieve a better mopping effect, it is recommended to use the main unit to clean the floor three times before install the mopping module. 13 Installation 6 Start cleaning When the circular indicator light on the main unit changes from slow blinking to stable, it means charging has completed. Briefly press button or start cleaning through the mobile phone client. 7 Remove the mopping module When the main unit is back on the dock charger after cleaning, press the buckles on both sides by hand, drag and remove the mopping module. Operating Instruction Main brush * Clean it every week as recommended 1. Turn over the machine, press the buckle and take off the cover. 2. Take out the main brush in an upwards movement and clean the bearing of the main brush. 3. Use the matching cleaning tool of the main brush to cut off the hairs entangled on the main brush. 4. Install the main brush, press tight the cover and fix the buckle. Note: It is recommended to replace the main brush every 6-12 months so as to ensure it cleans effectively. Main brush cover Buckle Main brush Bearing of the main brush Note:
Please use moistureproof mat if you put the dock charger on wood floor Remove tank when charging or not in use 14 Daily Maintenance Instruction for using the cleaning tool of the main brush Change of filter Pour the water into the dust bin, close the dust bin cover, shake the dust bin left and right, pour out the dirty water, repeat this step several times, until the filter clean. Please remove the filter and replace it as shown in the picture. Water tank filter element component
* It is recommended to replace it every 1-3 months 1. Use your finger to remove the two filter element component from the gap. 2. Fit the new filter element and make sure it is in the right place . Note: It is recommended to replace the filter element component every 1-3 months so as to ensure effective cleaning Note:
Wash the filter by water only, detergents are not allowed to use. Please do not use finger or brush to clean the filter to avoid any possible damage. Please dry out the filter at least for 24 hours after washing. 15 Daily Maintenance Main Unit Sensor Wipe the sensors of the main unit with a soft, dry cloth, including:
1. The four cliff sensors at the bottom of the main unit. 2. The wall sensor on the right side of the main unit. 3. The charging contact pieces at the bottom of the main unit. Cliff sensor Omni-directional wheel
* It is recommended to clean it every month 1. Turn over the machine and take out the omni-directional wheel by pulling upwards. 2. Clean the hair and dirt off the wheel and the axle. 3. Install the wheel and press it tight. Note: You may rinse it with tap water and install it after it gets dry Omni-directional wheel Charging contact pieces Side brush Wheel Axle Supporting frame Wall sensor Dock Charger
* It is recommended to clean it every month. Wipe the battery connectors of the dock charger with a soft, dry cloth. Restore Factory Settings If the machine does not function properly after resetting, please hold the button when the machine is on, and press the reset button at the same time, until you hear the voice prompt "start restoring the initial version", then the main unit has been restored to the factory settings. 16 Basic Parameters Main Unit Item Size Battery Weight Wireless Rated Voltage Rated Power Parameters 353 350 96.5mm Lithium-ion battery 14.4V/5200mAh 3.5kg Smart connect 14.4V DC 58W Dock Charger Item Size Rated Power Rated Input Rated Output Rated Frequency Parameters 151 130 98mm 42W 100-240V AC 20V DC 1.8A 50/60Hz Robotic Vacuum Cleaner Manufacturer: Beijing Roborock Technology Co., Ltd. Product Model: S50****, S55**** * can be 0 to 9, A to Z, a to z, "-", "_", "\", "/" or blank, for marketing purpose.) Address of Manufacturer: Floor 6, Suite 6016, 6017, 6018, Building C, Kangjian Baosheng Plaza, No. 8 Heiquan Road, Haidian District, Beijing, P.R. CHINA If you need after-sales service, please visit Roborock's official website at www.roborock.com or call the customer service at 400-900-1755 or follow Roborock's official WeChat account atroborock 17