FCC ID: VLJ-MBP85 Digital Video Baby Monitor (Baby Unit)

Users Guide Digital Video Baby Monitor Models: MBP854CONNECT, MBP854CONNECT-2, MBP854CONNECT-3, MBP854CONNECT-4 The features described in this Users Guide are subject to modifications without prior notice. Welcome... to your new Motorola Digital Video Baby Monitor!

Thank you for purchasing your new Motorola Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product related questions, please call:

US and Canada 1-888-331-3383 Email: support@motorolahome.com On the Web: www.motorolahome.com This User's Guide provides you with all the information you need to get the most from your product. Before you can use the Baby Monitor, we recommend you fully charge the battery in the Parent Unit, so that it continues to work if you disconnect it from the power supply to carry it to another location. Please read the Safety Instructions on page 8 before you install the units. Got everything?

1 x Parent Unit 1 x Baby Unit (Camera) 1 x Power adapter for the Parent Unit 1 x Power adapter(s) for the Baby Unit In multi-camera packs, you will find one or more additional camera units with power adapter units and battery packs. Overview of the Parent Unit RESET 16 15 11 12 13 14 21 2 3 4 5 6 7 8 9 10 1 20 17 19 18 1. Display (LCD screen) 2. Video ON/OFF Key V Press to turn the LCD display ON/

OFF Talk Key T Press and hold to speak to your baby 3. 11. Power Adapter / Battery LED BLUE when connected to an electrical outlet. RED when battery low. 12. Unit ON/OFF LED (Green) 13. Audio Level LED (Green, Orange, 4. Up Key +

Normal Mode: Tilt Up Menu Mode: Up 5. Down Key -

Normal Mode: Tilt Down Menu Mode: Down 6. Microphone 7. Menu Key M Press to open the Menu options 8. OK Key O Left Key <

9. Normal Mode: Pan Left Menu Mode: Left 10. Right Key >

Normal Mode: Pan Right Menu Mode: Right Red) 14. Power Key 0 Press and Hold to turn the unit ON/

OFF 15. Volume Key Press -/+ to decrease/increase Volume level on Parent Unit 16. Reset Key 17. SD Card socket 18. Micro USB Socket 19. Stand 20. Speaker 21. Antenna Raise the antenna for optimal reception Parent Unit menu icons Signal Level (4 Levels) Night Vision Mode (Screen changes to Black/White) Talk Mode Battery Level Control (4 Levels) Pan Left Pan Right Tilt Up Tilt Down Zoom Level Control (1X, 2X) Brightness Level Control (8 Levels) Lullaby Control (5 Song Selections) Alarm Setting (6h, 4h, 2h, Off) Temperature Reading (HH C / F or LL C / F) Icon & readings turn RED > 29C / 84F, and reading display HH C / F > 36C / 97 F Icon & readings turn RED < 14C / 57F, and reading display LL C / F < 1C / 34 F Camera Control (scan, view, add, delete) Local Recording (Record, Play) Set Video On Timer (5 min, 30 min, 60 min) Time Setting (Date, Time format 12/24 Hour and Time) Volume Level Control (8 Levels) SD Card detection No Baby Unit detected Overview of Your Baby Unit 1 2 3 4 5 6 7 1. Light Sensor (for night mode detection) 2. Camera Lens 3. Infrared LEDs (for night vision) 4. Power / Status indicator 5. Microphone 6. PAIR Button 8 9 10 11 5V 1.5A 7. Speaker 8. Antenna 9. Micro USB socket 10. ON/OFF Switch 11. Temperature Sensor Important guidelines for installing your Baby Monitor To use your Video Monitor Baby and Parent Units together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. Any large metal object, like a refrigerator, a mirror, a filing cabinet, metallic doors or reinforced concrete between the Baby and Parent Unit may block the radio signal. The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches. Use of other 2.4 GHz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product, so keep the Baby Monitor away at least 3ft from these types of products, or turn them off if they appear to be causing interference. If the signal is weak, try raising the Parent Unit's Antenna, moving the Parent and/or the Baby Unit to different positions in the room(s). Table of contents 2.1 2.2 2.3 3.1 3.2 3.3 3.4 3.5 3.6 1. Safety Instructions..................................................................................... 8 2. Getting Started........................................................................................ 11 Baby Unit Power Supply............................................................................ 11 Parent Unit Power Supply ......................................................................... 11 Registration (Pairing) ................................................................................ 13 3. Using the Baby Monitor........................................................................... 14 Setting up .................................................................................................. 14 Pan and Tilt ................................................................................................ 14 Night Vision Mode .................................................................................... 14 Talk Mode.................................................................................................. 14 Video ON/OFF ......................................................................................... 14 Temperature Display (HH C / F or LL C / F)...................................... 15 4. Parent Unit Menu Options ...................................................................... 16 Volume ...................................................................................................... 16 4.1 Brightness.................................................................................................. 16 4.2 Lullaby ....................................................................................................... 16 4.3 Zoom ......................................................................................................... 16 4.4 4.5 Alarm ......................................................................................................... 16 4.6 Camera Control........................................................................................ 17 4.6.1 Add (pair) a camera .................................................................. 17 4.6.2 View a camera ........................................................................... 17 4.6.3 Delete a camera ........................................................................ 18 4.6.4 Scan camera .............................................................................. 18 Temperature ............................................................................................. 18 4.7 Power Saving mode.................................................................................. 18 4.8 4.9 Video ......................................................................................................... 19 4.10 Time Setting .............................................................................................. 19 6 Table of contents H S I L G N E 5.4 5. Wi-Fi Internet Viewing ............................................................................ 20 5.1 Minimum System Requirements ..............................................................20 5.2 Getting started - Connecting Devices .....................................................21 User Account and Camera Setup on Android Devices .......................22 5.3 Power ON and Connect the Camera ......................................22 5.3.1 Download Hubble for Motorola Monitors App ........................22 5.3.2 Run Hubble for Motorola Monitors App on Android 5.3.3 device ........................................................................................22 5.3.4 Add the Camera to your account .............................................23 User Account and Camera Setup on iPhone/iPad .............................26 Power ON and Connect the Camera ......................................26 5.4.1 5.4.2 Download Hubble for Motorola Monitors App ........................26 Run Hubble App on your iPhone/iPad ................................26 5.4.3 5.4.4 Add the Camera to your account .............................................27 6. Camera Functions................................................................................... 32 6.1 Connecting the Camera Unit to power ...................................................32 6.2 Overview of the Features on Hubble App ...............................................32 7. Working with PC/Notebook................................................................... 35 8. Disposal of the Device (Environment)....................................................36 9. Cleaning ..................................................................................................37 10. Help..........................................................................................................38 11. General Information ................................................................................46 12. Technical Specifications .........................................................................52 Table of contents 7 1. Safety Instructions WARNING:

Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. 8 Safety Instructions H S I L G N E Baby Unit SET UP & USE:

Choose a location for the Baby Unit that will provide the best view of your baby in their crib. Place the Baby Unit on a flat surface, such as a dresser, desk, or shelf or mount the Unit to a wall securely using the keyhole slots on the underside of the stand. NEVER place the Baby Unit or cords inside your child's crib. Do not place the Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away). WARNING This digital video Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device. Adult assembly is required. Keep small parts away from children when assembling. This product is not a toy. Do not allow children to play with it. This Baby Monitor is not a substitute for responsible adult supervision. Keep this Users Guide for future reference. Do not place the Baby Unit or cords in the crib or within reach of the baby

(the unit and cords should be more than 3 feet away) Keep the cords out of reach of children. Do not cover the Baby Monitor with a towel or blanket. Never use extension cords with power adapters. Only use the power adapters provided. Test this monitor and all its functions so that you are familiar with it prior to actual use. Do not use the Baby Monitor near water. Safety Instructions 9 Do not place the Baby Monitor near a heat source. Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. Do not touch the plug contacts with sharp or metal objects. CAUTION Risk of explosion if battery is replaced by an unapproved battery type. Dispose of used batteries according to their instructions. FCC/IC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. IC Radiation Dclaration d'exposition Attention: Cet metteur doit tre install pour fournir une distance de sparation d'au moins 20 cm de toute personne. 10 Safety Instructions 2. Getting Started 2.1 Baby Unit Power Supply H S I L G N E Power adapter plug Switch to turn ON the camera ON OFF 1. Connect the small plug of the power adapter to the Baby Unit (camera) and the other end to a suitable electrical outlet. NOTE Only use the enclosed power adapter (5V DC / 1500mA). 2. Slide the ON/OFF switch to the ON position. The power LED will light up in blue. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off. 3. 2.2 Parent Unit Power Supply IMPORTANT The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium-

ion battery 1880mAh), please charge it for 16 hours before use. 1. Connect the micro USB plug of the power adapter to the Parent Unit and the other end to a suitable electrical outlet. Only use the enclosed power adapter (5V DC / 1500mA) with the micro USB plug. Getting Started 11 2. Press and hold the 0 POWER ON/OFF button for 1 second to turn ON the Parent Unit. 3. Once the Baby and Parent Units are switched on, the display on the Parent Unit will show the video captured by the Baby Unit. 4. If there is no connection or you are out of range, the video display will turn 5. off and the unit will beep every 5 seconds. Move the Parent Unit closer to 6. 7. Press and hold the 0 POWER ON/OFF button, until the progress bar the Baby Unit until the link is re-established. finishes scrolling, to turn OFF the Parent Unit. turns RED to indicate that the battery is low, and the NOTE The battery icon parent unit will beep every 15 seconds. The battery needs to be recharged; it will take12 hours to charge fully. When charging 1. Whilst the power is OFF, and the adapter is plugged in, an adapter logo will appear on-screen and a flashing battery logo will display for 15 seconds. The Blue LED at the top left corner will light up; indicating that the adapter is plugged in. 2. Whilst the power is ON, and the adapter is plugged in, the battery icon at the top right corner of the screen will show that the battery is charging. The Blue LED at the top left corner will light up to indicate that the adapter is plugged in. 12 Getting Started Registration (Pairing) 2.3 The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below:

1. Press the M button of the Parent Unit and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until H S I L G N E the del/

add/

view/

3. Press the + UP button or - DOWN button to select is highlighted, and scan menu will pop up.

+

add, and press the O button to confirm. 4. Camera will pop up, press the + UP button or - DOWN button to select the desired Camera and press the O button to start searching for a camera unit. The green audio level LED will flash rapidly while searching. 5. Press the O button to confirm. 6. Press and hold the PAIR button underneath the Baby Unit until the Parent Unit finds the camera, beeps and the video from the camera appears. NOTE If a particular Baby Unit was registered previously, registering this current Baby Unit again will overwrite the old registration. Getting Started 13 3. Using the Baby Monitor 3.1 Place the Baby Unit in a convenient location (e.g. on a table) and point the Setting up camera lens towards the area you want to monitor. Adjust the angle of the Baby Unit's head by rotating the camera up, down, left and right until you are satisfied with the image shown on the Parent Unit. Pan and Tilt Night Vision Mode NOTE Do not place the Baby Unit within the baby's reach! If there is interference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment. 3.2 The camera can be remotely controlled from the Parent Unit. 1. Press the + UP button or - DOWN button to tilt up or down. 2. Press the < LEFT button or > RIGHT button to pan left or right. 3.3 The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the top of the unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and white. The top of the screen. 3.4 Press and hold the T TALK button on the Parent Unit to talk to your baby through the Baby Units loudspeaker. The T icon will be displayed at the top of the LCD screen. 3.5 Press V VIDEO ON/OFF key to turn the LCD display on or off, whilst still leaving the audio monitor on. icon will be displayed at the Video ON/OFF Talk Mode 14 Using the Baby Monitor Temperature Display (HH C / F or LL C / F) 3.6 The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen. The readings will turn RED if the temperature goes above 29C / 84F or below 14C / 57F. The reading will change to HH C / F if the temperature goes above 36C / 97F. The reading will change to LL C / F if the temperature goes below 1C / 34F. H S I L G N E Using the Baby Monitor 15 4. Parent Unit Menu Options 4.1 1. Press the Volume button - or + to adjust the volume level, the Volume icon will pop up and you can select the desired volume level from level 0~8. (The default volume level setting is level 4.) Brightness 4.2 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until 3. Press the + UP button or - DOWN button to select the desired brightness is highlighted. level from level 1 ~ 8. (The default brightness level setting is level 5.) Lullaby 4.3 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until 3. Press the + UP button or - DOWN button to select the desired song from the 5 lullabies available, or the cycle option to play all 5 songs in turn. If an individual song is selected it will only play once. (The default setting is lullaby OFF.) Zoom 4.4 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until 3. Press the + UP button or - DOWN button to select the 1X or 2X Zoom. is highlighted. is highlighted.

(The default setting is 1X.) Alarm 4.5 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until 3. Press the + UP button or - DOWN button to select the alarm time (6h, 4h, is highlighted. 2h). (The default setting is Alarm OFF.) If an alarm time is selected, the Parent Unit will beep for about 45 seconds after every 6, 4 or 2 hour period. Parent Unit Menu Options 4. 16 Camera Control 4.6 4.6.1 Add (pair) a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until the del/

add/

view/

scan menu will pop up. 3. Press the + UP button or - DOWN button to select O button to confirm. H S I L G N E is highlighted, and add, and press the 4. Camera will pop up, press the + UP button or - DOWN button to select the desired Camera, and press the O button to start searching for a camera unit. The green audio level LED will flash rapidly while searching. 5. Press and hold the PAIR button on the underside of the Baby Unit until the Parent Unit finds the camera, beeps and the picture from the camera appears. NOTE A camera can only be registered to one Parent Unit at any one time. 4.6.2 View a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until scan menu pops up. 3. Press the + UP button or - DOWN button to select view/

add/

del/

the is highlighted and view, and press the O button to confirm. 4. Camera will pop up, press the + UP button or - DOWN button to select the desired camera, and press the O button to view the picture from that camera. TIP Quick Method to View Cameras instead of entering into the menu bar. scan. Directly press OK repeatedly to select Camera

, Parent Unit Menu Options 17 4.6.3 Delete a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until the del/

add/

view/

scan menu will pop up. 3. Press the + UP button or - DOWN button to select O button to confirm. is highlighted, and del, and press the 4. Camera will pop up, press the + UP button or - DOWN button to select the desired Camera, and press the O button to delete that registration. NOTE You are not allowed to delete the camera if there is only one registered camera in the system. 4.6.4 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and Scan camera the del/

add/

view/

scan menu will pop up. 3. Press the + UP button or - DOWN button to select scan, and press the O button to confirm. 4. The screen will then display images from different registered cameras in a loop of Camera

, changing about every 12 seconds.

, Temperature TIP Quick Method to View Cameras instead of entering into the menu bar. scan. Directly press OK repeatedly to select Camera 4.7 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until 3. Press the + UP button or - DOWN button to select C or F. 4.8 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until V is highlighted. 3. Press the + UP button or - DOWN button to select auto video off after Power Saving mode is highlighted. 5 mins, 30 mins or 60 mins if not in charging. 18 Parent Unit Menu Options Video 4.9 You can record a video of your baby with this function. The videos will be stored on the SD Memory Card, so please ensure the memory card has enough free memory. 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until 3. Press the + UP button or - DOWN button to select button to start video recording, thence select press button to stop.

, and press O and press O is highlighted. 4. Press the + UP button or - DOWN button to select and press O button to play back the video. H S I L G N E NOTE The video format is AVI which you can view on a computer/smartphone/tablet. 4.10 Time Setting 1. Press the < LEFT button or > RIGHT button until is highlighted and 2. Press the < LEFT button or > RIGHT button to move between the settings. 3. Press the + UP button or - DOWN button to set Date, Time format and press O Button. Time. Parent Unit Menu Options 19 5. Wi-Fi Internet Viewing 5.1 Minimum System Requirements Web Portal Windows 7 Mac OS 10.7 Chrome 24 Safari 6 Java 7 Firefox 18.0 Adobe Flash Player 15.0 Internet Explorer 9 Android System Version 4.2 or above iPhone/iPad iOS Version 7.0 or above Wi-Fi requirements:

At least 0.6 Mbps upload bandwidth per camera. Test your Internet speed at:

http://www.speedtest.net/

20 Wi-Fi Internet Viewing 5.2 Getting started - Connecting Devices How does it work?

H S I L G N E View your Camera from any compatible device remotely When a user tries to access the Camera, our secure server authenticates the users identity and permits access to the Camera. Setup Connect the camera to the power adapter, then plug into a suitable electrical outlet and make sure the power switch is in the ON position. The Camera must be within range of the Wi-Fi router with which you want to connect. Make sure the password of the router is available for entering during the in-app setup process. Status of LED Indication:

- Pair / Setup state:

- Unconnected state:

- Connected state:

- Ready for connection state: LED is blue and flashing slowly NOTE You can only setup via a compatible smartphone or tablet and not via a PC. LED is red and blue and flashing slowly LED is red and flashing slowly LED is blue and always on Wi-Fi Internet Viewing 21 User Account and Camera Setup on Android Devices 5.3 What you need MBP854CONNECT Camera Power adapter for the Camera Device with AndroidTM system version 4.2 and above 5.3.1 Power ON and Connect the Camera Connect the power adapter to a mains power socket and insert the plug into the micro USB socket on the back of the Camera Unit. Make sure that the ON/OFF switch is in the ON position. The Cameras Red LED flashes after the Camera has finished booting. When you hear one beep, this means that the Camera is ready for setup. 5.3.2 Download Hubble for Motorola Monitors App Go to Google Play Store to search for "Hubble for Motorola Monitors". Download "Hubble for Motorola Monitors" App from Google Play Store and install it on your Android device 5.3.3 Run Hubble for Motorola Monitors App on Android device Ensure that your Android device is connected to your Wi-Fi router. Run "Hubble for Motorola Monitors" App, enter your account information, read through the Terms of Service, then select "I agree to the Terms of Use"

before you tap Create. (Picture A1) NOTE If you already have a Hubble App account, please select Already have an Account? to go to the next step. 22 Wi-Fi Internet Viewing A1 5.3.4 Add the Camera to your account Tap on the top right corner of the screen to add camera. (Picture A2) H S I L G N E i d o r d n A The following setup instructions will appear on the screen. (Picture A3) A2 Plug in and switch on the camera, and wait for a couple of minutes for it to A3 warm up. Tap Continue when the Camera LED starts to blink. Wi-Fi Internet Viewing 23 The following setup instructions will appear on the screen. (Picture A4) Press and hold the PAIR button on the bottom left edge of the Camera Unit A4 for 3 seconds. You will then hear a beep tone, followed by a voice prompt indicating that the Camera is ready for pairing. Tap Continue. The App will automatically search for and connect to your Camera as shown in the pictures below. (Pictures A5, A6) The blue/red color LED on the Camera Unit will flash. A5 A6 24 Wi-Fi Internet Viewing Select your Wi-Fi Network, enter your password and then tap Connect.

(Pictures A7, A8) H S I L G N E i d o r d n A A7 A8 It will take a few minutes for the Camera to connect to the Wi-Fi network before showing the connection status. (Pictures A9, A10) If connection fails, please tap Retry and repeat the steps starting from 5.3.4. A9 A10 Tap View Camera to view the video captured by the Camera Unit. The status indicator LED on the Camera Unit will flash in red/blue. Wi-Fi Internet Viewing 25 User Account and Camera Setup on iPhone/iPad 5.4 What you need MBP854CONNECT Camera Power adapter for the Camera iPhone / iPad with iOS version 7.0 and above 5.4.1 Power ON and Connect the Camera Connect the power adapter to a mains power socket and insert the plug into the micro USB socket at the back of the Camera. Make sure that the ON/OFF switch is in the ON position. The Camera's red LED flashes after the Camera has finished booting. When you hear one beep, this means that the Camera is ready for setup. 5.4.2 Download Hubble for Motorola Monitors App Go to App Store to search for "Hubble for Motorola Monitors". Download "Hubble for Motorola Monitors" App and install it on your iPhone/iPad. 5.4.3 Run Hubble App on your iPhone/iPad Ensure that your iPhone/iPad is connected to your Wi-Fi Router. Run the "Hubble for Motorola Monitors" App, enter your account information, read through the Terms of Service, and then select "I agree to the Terms of Service" before you tap Create. (Picture i1) NOTE If you already have a Hubble App account, please select Already have an Account? to go to the next step (Picture i1). 26 Wi-Fi Internet Viewing i1 5.4.4 Add the Camera to your account Tap on the top right corner of the screen to add camera. (Picture i2) H S I L G N E S O i The following Bluetooth setup instructions will appear on the screen. (Picture i2 i3) i3 Wi-Fi Internet Viewing 27 Tap Settings and activate Bluetooth on your iPhone/iPad. (Pictures i4, i5) i4 i5 Press the HOME key to return to the home screen, then tap on "Hubble for Motorola Monitors" App to resume setup. The following setup instructions will appear on the screen. (Picture i6) Note that if Bluetooth was on, you will be brought to this step directly. Wait for a couple of minutes for the Camera Unit to warm up and tap Continue i6 when the Camera LED indicator starts to blink. 28 Wi-Fi Internet Viewing The following will appear on the screen. (Pictures i7, i8) H S I L G N E S O i i7 i8 Name the location of your Camera Unit and tap Continue. (Pictures i9, i10) i9 i10 Wi-Fi Internet Viewing 29 The Camera Unit will search for the Wi-Fi network (Picture i11) and display a list of available networks. (Picture i12) i11 i12 Select your Wi-Fi network and tap Continue. (Picture i13) Enter your Wi-Fi password and tap Next. (Picture i14) i13 i14 It will take a few minutes for the Camera Unit to connect to the Wi-Fi network before showing the connection status. (Pictures i15, i16) Wi-Fi Internet Viewing 30 If connection fails, tap Retry and repeat the steps starting from 5.4.4. H S I L G N E S O i i15 i16 Tap View Live Camera to view the video captured by the Camera Unit. The LED indicator on the Camera Unit will light up in blue. Wi-Fi Internet Viewing 31 6. Camera Functions 6.1 Connect the power adapter to a mains power socket and insert the plug into Connecting the Camera Unit to power the micro USB socket on the back of the Camera Unit. Slide the ON/OFF switch to the ON position. The power indicator LED will light up in green. (Note: To switch off the device, slide the ON/OFF switch to OFF.) Run the Hubble App on your AndroidTM or iOS device. 6.2 Overview of the Features on Hubble App Menu Tap Cameras Tap Event Log to access the camera list. to access the video record list that is triggered by Motion or Sound detection. Tap Account to access user Profile, subscription Plan, Notifications setting, Remote Connection Setting and About Hubble Photo/Video Take a photo or record a video from your Camera. Tap the Video icon to activate Video function. Tap and hold the red button start recording and release to stop. to Tap the Camera icon to switch to Camera mode. You can capture photos from Camera view. Note:

Photos and videos will be stored in the internal flash memory of your smart device, and can be accessed via the Gallery or Media Player

(AndroidTM Device). To play videos, please use the Hubble App. 32 Camera Functions Lullaby Temperature Measure Two-way communication Tap to access the Melody menu and select one of the 5 pre-set melodies you wish to play on your Camera Unit. H S I L G N E The temperature reading from the temperature sensor at the back of the Camera Unit will display on the screen of your Android device. The readings will turn RED if the temperature goes beyond the High/Low temperature that was set in your Account. Tap to activate the function. Press the round button Unit. Toggle the button again to listen to the audio feedback from the Camera Unit. once to speak through the Camera Speaker Tap to toggle speaker on or off. Pan and Tilt Tap to pan right and left, tilt up and down. Zoom Slide the scroll bar on the right hand side of the screen to zoom in or zoom out. You can also use the pinch-in and pinch-out gestures to zoom out or zoom in a picture. To use pinch-to-zoom gesture, your device must support multi-touch technology. Camera Functions 33 Camera Setting You can change the Camera settings by tapping on the Tap Details to review Camera Name, Cloud Settings icon. Subscription, Change Image, Timezone, Camera Model, Firmware Version and Delete All Events. Tap Notifications to set the sensitivity of Sound Detection, Motion Detection and to set Alerts for High temperature (Up to 33 oC or 91 oF) /

Low temperature (down to 10o C or 50 oF). Tap Settings to set Ceiling mount, Brightness and Volume. Add Camera Enter Add Camera procedures. Delete All Events Tap to delete all events. Select Events Check the box to select recorded event(s). Edit Events Tap to select and delete event(s). Delete Events Tap to delete selected event(s). 34 Camera Functions 7. Working with PC/Notebook Go to https://app.hubbleconnected.com/#login Enter your User Name and Password, and then click Login if you have already created an account. H S I L G N E Click on the Camera list paired in your account via Android device or iPhone/iPad, and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming. On the website, you can change the Settings by following the menu instructions. Working with PC/Notebook 35 8. Disposal of the Device (Environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations. 36 Disposal of the Device (Environment) 9. Cleaning Clean your Digital Video Baby Monitor with a slightly damp cloth or with an anti-

static cloth. Never use cleaning agents or abrasive solvents. H S I L G N E Cleaning and care Do not clean any part of the Digital Video Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. Keep your Digital Video Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet. Every effort has been made to ensure high standards of reliability of your Digital Video Baby Monitor. However, if something does go wrong, please do not try to repair it yourself - contact Customer Service for assistance. Cleaning 37 10. Help Display No display Try recharging or replacing the battery pack. Reset the Units. Disconnect the battery pack of the Parent Unit and unplug both the Units' electrical power, then plug them back in. Is the Unit turned on?

Press and hold the ON/OFF button Is the correct camera selected? Change the camera number, if necessary. Is the video display turned on? Press the VIDEO ON/OFF button ON. on the Parent Unit to turn it ON. to turn it When operating using batteries only, the display will go blank after 5 minutes or 30 minutes or 60 minutes to save power (depending on video settings). The Unit is still active and will give you audio alerts. You can reactivate the screen by pressing any button. Registration If the Baby Unit has lost its link with the Parent Unit Try recharging or replacing the battery pack. If the Baby Unit is too far away it may be going out of range, so move the Baby Unit closer to the Parent Unit. Reset the Units by disconnecting them from the battery and electrical power. Wait about 15 seconds before reconnecting. Allow up to one minute for the Baby Unit and the Parent Unit to synchronize. See 2.3 Registration (Pairing), if there is a need to re-register the Units. Interference Noise interference on your Parent Unit Your Baby and Parent Units may be too close. Move them further apart. Make sure there is at least 1 to 2m (3 to 6ft) between the 2 Units to avoid audio feedback. lf the Baby Unit is too far away, it may be out of range. Move the Baby Unit closer to the Parent Unit. 38 Help Make sure that the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. Use of other 2.4 GHz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product. Keep the Baby Monitor at least 1.5m (5ft) away from these types of products, or turn them off if they appear to be causing interference. If the signal is weak, try moving the Parent and/or Baby Unit to different positions in the rooms. H S I L G N E Noise interference on your device To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi Camera Unit. Use of other 2.4 GHz products, such as Bluetooth systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi Camera Unit at least 1.5m (5ft) away from these types of products, or turn them off if they appear to be causing interference. Lost connection Check your Wi-Fi settings. If necessary, reconnect your Wi-Fi. Ensure that the Wi-Fi Camera Unit is switched ON. Wait a few minutes to make the connection with the Wi-Fi system. If you forgot your password If you do not remember your password, tap Forgot Password and submit your e-mail address. A new password will be sent to your e-mail address immediately. Help 39 Troubleshooting for Wi-Fi Internet Viewing Category Problem Solution Account Account Account Account Connectivity Issues Description / Error I am unable to login even after registration. I receive an error message saying: "Email ID is not registered". What do I do if I forget my password?

I am unable to receive a new password although I have used the "Forgot password" option. I get a message: We are having problems accessing your Camera. This could be due to the lack of an internet connection. Please wait and try again later. Please check your user name and password. Please ensure that you have registered with us. Tap Create Account to create an account. Click on the "Forgot Password" link on https://app.hubbleconnected.com/

#lostpassword OR on your Android or iOS application. An email will be sent to your registered email address. 1. The e-mail might have been sent to your Junk Mail Folder. Please check your Junk Mail Folder. 2. There might be a delay in getting your e-mail. Please wait a few minutes and refresh your email account. 1. Please try again in a few minutes. This could be because of any issue with your internet connection. If the problem remains, please restart your Camera to check if this fixes the problem. 2. 3. Please restart your Wireless Router. 40 Help Viewing Camera When I am in "remote mode", the video stops after 5 minutes. How do I view for longer?

Features The sound alert setting threshold is not right. Setting Up While I am adding a new Camera to my account, I am not able to find any Cameras to add. General What are the supported browsers for accessing from my PC/

Mac?

H S I L G N E When you are accessing your Camera via a network different from your home network (over the internet) your video times out after 5 minutes. You can click on the Camera again from the Android/iOS application to start streaming again. If you are accessing from your web-

browser, then you can press on the Reload button to start viewing your Camera video stream again. You can Adjust Sound Sensitivity to trigger notifications under Camera Setting menu. If you are trying to add a Camera which has previously been added into your account or another account, you will first have to reset the Camera. This can be done by pressing and holding the PAIR button at the bottom of the Camera for 5 seconds. We recommend using Google Chrome 24 or above. However the following browsers are also supported:

Internet Explorer 9.0 or above (for PC), Safari 6.0 or above (for Mac) or Firefox 18.0 or above (both PC or Mac). Help 41 General What is the significance of LED flashing?

Connectivity Issues I am not able to access my Camera. Setting Up During setup on devices for Android and iOS, I am not able to find my Camera during the last step and the setup fails. A flashing LED indicates the following status:

Slow flashing: 1. Your Camera is in setup mode. You can add the Camera to your account in this mode. Out of the box, the Camera is in Setup mode. To reset to Setup mode, press and hold the PAIR button on the bottom of the Camera untill you hear a beep. Slow flashing: 2. The Camera is either connecting to the router or has lost the link to the router. Please ensure that the Camera is in the Wi-Fi signal range. LED is stable: The Camera is connected to the Wi-Fi network. Please check if the Camera is within Wi-Fi Camera is flashing slowly, please try to move the Camera closer to the router for better Wi-Fi connectivity and try again. Please reset the Camera to setup mode and try again. Press and hold the PAIR button on the bottom of the Camera untill you hear a beep. Wait for a minute for the Camera to restart. When the Camera LED is flashing, this indicates that it is in setup mode. Now restart the setup from your smartphone again. range. If the LED on your 42 Help Connectivity Issues Camera General Even though I am accessing my Camera from the same Wi-Fi network, I still find my Camera is shown as remote. I can only access it for 5 minutes at a time. When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do?

Which platforms are supported for accessing my Camera?

General I do not hear any sound when I am accessing a remote Camera. Please check your wireless router settings. For example, for Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. H S I L G N E Please upgrade your firmware. This takes around 5 minutes. We push upgrades from time to time to improve Camera features. version 9 Minimum requirement:

Windows 7*

*Java browser plug-in needed Mac OS version 10.7 Chrome version 24 Internet Explorer Safari version 6 Java version 7 Firefox version 18.0 Adobe Flash Player 15.0 Android 4.2 iPhone /iPad iOS version 7.0 You can tap on the speaker icon in the video stream screen to hear audio. By default the audio is not ON when you are accessing a remote Camera. Help 43 General What is the meaning of

"Local Camera" and

"Remote Camera"?

General How do I download the App for Android and iOS devices?

Setting up When the video is cut off, the application attempts to reconnect and this results in lost sound and choppy video. When you are accessing your Camera from the same wireless network (Home) in which it is configured, it is a Local Camera. When you are accessing your Camera away from your home it is a Remote Camera. You may be using 3G, 4G or 4G LTE or a Wi-Fi connection outside of your home. Android:

- Open the Google Play Store on your Android device.

- Select Search

- Type in "Hubble for Motorola Monitors"

- The results will show the Hubble App

- Select to install it iOS Device:

- Open the App StoreSM

- Select Search

- Type in "Hubble for Motorola Monitors"

- The results will show the Hubble App

- Select to install it You will need to turn off the Auto Lock function of your device to ensure continuous video/audio streaming. 44 Help Features How many users can access the Camera at one time?

Connectivity issues I found interference caused by my other webcam devices. H S I L G N E If you are accessing in Local Mode, two users are supported, after two users all streaming will go through the remote server. This allows for unlimited user access to a single Camera at one time. Video streaming performance is related to internet bandwidth, especially if you have 2 or more video streaming devices that are working through the same router. Help 45 11. General Information lf your product is not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Contact Customer Service:

US and Canada 1-888-331-3383 Email: support@motorolahome.com To order a replacement battery pack, contact customer service. Consumer Products and Accessories Limited Warranty

("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE"). What Does this Warranty Cover?

Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or certified accessory ("Accessory") sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your exclusive warranty and is not transferable. Who is covered?

This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do?

BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that does not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts. 46 General Information H S I L G N E What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another. General Information 47 Products Covered Consumer Products Consumer Accessories Consumer Products and Accessories that are Repaired or Replaced Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this Warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. 48 General Information H S I L G N E Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

US and Canada 1-888-331-3383 Email: support@motorolahome.com You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE authorized Repair Center. To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number. These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent, employee or staff of BINATONE, that may have been made in connection with the said purchase. General Information 49 FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B) 50 General Information H S I L G N E WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the users authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s):

Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term "IC: " before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. General Information 51 12. Technical Specifications Baby Unit Frequency Image sensor IR LED Power Adapter 2.4 GHz to 2.48 GHz color CMOS 1M Pixels 8 pcs Ten Pao International Ltd. S012BEU0500150 Input: 100-240V AC, 50/60Hz, 500mA;

Output: 5.0V DC, 1500mA or, ZhongShan BAOLIJIN Electronic Co., Ltd. BLJ06W050150P1-U Input: 100-240V AC, 50/60Hz, 200mA;

Output: 5.0V DC, 1500mA WARNING Use only with supplied power supply. 52 Technical Specifications Parent Unit Frequency Display Display colors Brightness control Volume control Power Adapter Battery H S I L G N E 2.4 GHz to 2.48 GHz 4.3" diagonal TFT LCD 16.7M color LCD 8 steps 8 steps Ten Pao International Ltd. S012BEU0500150 Input: 100-240V AC, 50/60Hz, 500mA;

Output: 5.0V DC, 1500mA or, ZhongShan BAOLIJIN Electronic Co., Ltd. BLJ06W050150P1-U Input: 100-240V AC, 50/60Hz, 200mA;

Output: 5.0V DC, 1500mA WARNING Use only with provided power supply. Lenovo BL253 3.8V, 2000mAh Lithium-Ion Polymer, rechargeable battery pack WARNING Do not use non-rechargeable batteries for the Parent Unit. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Technical Specifications 53 Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. Internet Explorer and Windows are trademarks of the Microsoft group of companies. Firefox is a registered trademark of the Mozilla Foundation. Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated. Java is a registered trademark of Oracle and/or its affiliates. All other trademarks are the property of their respective owners. 2017 Motorola Mobility LLC. All rights reserved. EN_US Version 14.0 Printed in China