FCC ID: VLJ-PEEKABOO Motorola Peekaboo Wi-Fi Home Video Camera

USERS GUIDE Wi-Fi Motorola Peekaboo MODELS: PEEKABOO, PEEKABOO-2, PEEKABOO-3, PEEKABOO-4, PEEKABOO-W, PEEKABOO-W2, PEEKABOO-W3, PEEKABOO-W4, PEEKABOO TWIN, PEEKABOO TRIPLE, PEEKABOO QUAD The features described in this users guide are subject to modifications without prior notice. Welcome... to your new Motorola Wi-Fi Home Video Camera!

Thank you for purchasing your new Motorola Wi-Fi Home Video Camera. If you have always wondered what happens when you are away, wonder no more. Now you can monitor your children, pets or property with this easy to use system. You can install the Camera only from your iPhone/iPad or Android devices and view the Camera video from your PC or Notebook, as well as from your iPhone/iPad or Android devices. Please keep your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product related questions, please call:

US and Canada 1-888-331-3383 Email: support@motorolastore.com This Users Guide has all the information you need to make the most out of your product. Please read the Safety Instructions on pages 5 - 6 before you install the unit. Inside the Box 1 x Wi-Fi Camera Unit 1 x Power Adapter 1 x Quick Start Guide In multi-camera packs, you will find one or more additional Camera Units with power adapter units. 8 6 9 Overview of your Camera 4 5 1 2 3 7 1. Light Sensor (for night mode detection) Infrared LEDs (for night vision) 5. 6. Speaker 7. Micro USB socket 8. PAIR Button 9. SD Card slot 2. Power / Status indicator 3. Microphone 4. Camera Lens Important guidelines for installing your Wi-Fi Camera Unit Use of other 2.4 GHz products, such as other wireless networks, Bluetooth systems or microwave ovens may cause interference with this product. Keep the Wi-Fi Camera Unit away from these types of products, or turn them off if they appear to be causing interference. Always ensure that you have a good Wi-Fi connection available. Table of contents 1. Safety Instructions ..................................................................................... 5 2. Minimum System Requirements ............................................................... 7 3. Getting started - Connecting Devices ...................................................... 8 3.1 Setup .............................................................................................................. 8 3.2 Set Night Light ................................................................................................ 9 3.3 Set Lightshow Projector ................................................................................. 9 3.4 Night Vision Mode ......................................................................................... 9 3.5 Temperature Display (HH C / F or LL C / F) ........................................... 9 3.6 User Account and Camera Setup on Android Devices .......................... 10 3.6.1 Power ON and Connect the Camera ............................................. 10 3.6.2 Download Hubble for Motorola Monitors App ............................... 10 3.6.3 Run Hubble for Motorola Monitors App on Android device ...... 10 3.6.4 Add the Camera to your account .................................................... 11 3.7 User Account and Camera Setup on iPhone/iPad .............................15 3.7.1 Power ON and Connect the Camera ............................................. 15 3.7.2 Download Hubble for Motorola Monitors App ............................... 15 3.7.3 Run Hubble for Motorola Monitors App on iPhone/iPad ........15 3.7.4 Add the Camera to your account .................................................... 16 4. Camera Functions ...................................................................................20 4.1 Connecting the Camera Unit to power ...................................................... 20 4.2 Overview of the Features on Hubble App ................................................... 20 5. Working with PC/Notebook ...................................................................22 6. Procedure for Resetting the Camera ......................................................23 7. Help ..........................................................................................................24 8. General Information ................................................................................30 9. Technical Specifications ..........................................................................36 4 Table of contents 1. Safety Instructions WARNING:

STRANGULATION HAZARD - In case this unit is being used to monitor infants or children, keep the unit and adapter cord more than 1 metre away from the cot and out of their reach. Never place the Camera or cords within a cot or near a bed. Secure the cord away from childrens reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. As with any electrical device, supervision of your pets usage should be exercised until your pet is acclimated to the product. If your pet is prone to chewing, we strongly recommend you keep this and all other electrical devices out of its reach. Wi-Fi CAMERA UNIT SET UP & USE:

Place the Wi-Fi Camera Unit on a flat surface, such as a chest of drawers, desk, shelf or wall-mount it using the provided self adhesive pad. NEVER place the Wi-Fi Camera Unit or cords within the cot. Safety Instructions 5 ENGLISH WARNING This Wi-Fi Camera Unit is compliant with all relevant electromagnetic field standards and is, when handled as described in the Users Guide, safe to use. Therefore, always read the instructions in this Users Guide carefully before using the device. Adult assembly is required due to small parts. Keep all small parts away from children. This product is not a toy. Do not allow children to play with it. This Wi-Fi Camera Unit is not a substitute for responsible adult supervision. Keep this User Guide for future reference. Do not place the Wi-Fi Camera Unit or cords in the cot or within reach of the baby (the unit should be at least 1 metre away). Keep the cords out of reach of children. Do not cover the Wi-Fi Camera Unit with a towel or blanket. Test the Wi-Fi Camera Unit and all its functions so that you are familiar with it prior to use. Do not use the Wi-Fi Camera Unit near water. Do not install the Wi-Fi Camera Unit near a heat source. Only use the Power Adapter provided. Do not use other power adapters as this may damage the device. Never use extension cords with Power Adapters. Do not touch the plug contacts with sharp or metal objects. 6 Safety Instructions Internet Explorer 9 2. Minimum System Requirements Web Portal Windows 7 Mac OS 10.7 Chrome 24 Safari 6 Java 7 Firefox 18.0 Adobe Flash Player 15.0 Android System Version 4.4.2 or above iPhone/iPad iOS Version 9.0 or above High Speed (Wi-Fi) Internet At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site: http://www.speedtest.net) If using a MicroSD Card it can be up to 32MB, and must be speed class 4 or above for best video quality. Minimum System Requirements 7 ENGLISH 3. Getting started - Connecting Devices How does it work?

PEEKABOO Camera Wi-Fi Router Access your Camera locally View your Camera from any compatible device remotely Hubble Service Setup When a user tries to access the Camera, our Hubble server authenticates the users identity and permits access to the Camera. 3.1 Connect the Camera to the Power Adapter, then plug into an electrical outlet. The Camera must be within range of the Wi-Fi router with which you want to connect. Make sure the password of the router is available for entering during the in-app setup process. Status of LED Indication:

-

-

- Connected state:

-

-

Note: You can only setup via a compatible smartphone or tablet and not via a PC. LED cycles from Blue to Purple to Red LED is Red and Flashing LED is Blue and always on LED is Blue and Flashing LED is Red and Flashing Live Streaming:

Ready for connection state:

Pair / Setup state:

Unconnected state:

8 Getting started - Connecting Devices button once to switch Set Night Light Set Lightshow Projector button to switch Light Show Project on or off. 3.2 The nightlight feature provides a soft glow to help soothe your baby to sleep and help keep them calm throughout the night. Press Night Light on, tap again to select 7 colour options. The light has 3 levels of brightness available. 3.3 Toggle 3.4 Night Vision Mode The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the front of the Unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and white. The icon will be displayed at the top of the screen. 3.5 The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen in C or F (see Section 4.7 Temperature for how to change). The readings will turn RED if the temperature goes above 29C / 84F or below 14C / 57F. The reading will change to HH C / F if the temperature goes above 36C / 97F. The reading will change to LL C / F if the temperature goes below 1C / 34F. Temperature Display (HH C / F or LL C / F) Getting started - Connecting Devices 9 ENGLISH 3.6 User Account and Camera Setup on Android Devices What you need Wi-Fi Camera Unit Power adapter for the Camera Device with Android system version 4.4.2 and above 3.6.1 Power ON and Connect the Camera Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket on the back of the Camera Unit. The Cameras Red LED Flashes after the Camera has finished booting. 3.6.2 Download Hubble for Motorola Monitors App Go to Google Play Store to search for Hubble for Motorola Monitors. Download Hubble for Motorola Monitors App from Google Play Store and install it on your Android device 3.6.3 Run Hubble for Motorola Monitors App on Android device Ensure that your Android device is connected to your Wi-Fi router. Run Hubble for Motorola Monitors App, enter your account information, read through the Terms of Service, then select By signing up you agree to our Terms & Conditions before you tap SIGNUP. (Picture A1) 10 Getting started - Connecting Devices Note:

If you already have a Hubble App account, please select Already have an Account? to go to the next step. 3.6.4 Add the Camera to your account Tap on the lower right corner of the screen to add camera. (Picture A2) A1 A2 Getting started - Connecting Devices 11 ENGLISH The following setup instructions will appear on the screen. (Pictures A3) Plug in and switch on the camera, and wait for a couple of minutes for it to warm up. The following setup instructions will appear on the screen. (Picture A4, A4a) A3 A4 A4a 12 Getting started - Connecting Devices To pair the camera - Press and hold the PAIR button on the back of the Camera Unit for 8 seconds. You will then hear a beep tone, followed by a voice prompt indicating that the Camera is ready for pairing. Pair the device Tap DETECT CAMERA. The App will automatically search for your Camera, select your Camera from the list of networks as shown in the pictures A6 below. (Pictures A5, A6, A7) The LED on the camera will cycle from Red to Blue to Purple. A5 A6 A7 Getting started - Connecting Devices 13 ENGLISH Select your Wi-Fi Network, enter your password and then tap Connect.

(Pictures A8, A9, A10) A8 A9 A10 It will take a few minutes for the Camera to connect to the Wi-Fi network before showing the connection status. (Pictures A11) If connection fails, please tap Retry and repeat the steps starting from 3.2.4. A11 14 Getting started - Connecting Devices 3.7 User Account and Camera Setup on iPhone/iPad What you need Wi-Fi Camera Unit Power adapter for the Camera iPhone/iPad with iOS version 9.0 and above 3.7.1 Power ON and Connect the Camera Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket at the back of the Camera. The Cameras Blue LED is lit after the Camera has finished booting. 3.7.2 Download Hubble for Motorola Monitors App Go to App Store to search for Hubble for Motorola Monitors. Download Hubble for Motorola Monitors App and install it on your iPhone/iPad. 3.7.3 Run Hubble for Motorola Monitors App on iPhone/iPad Ensure that your iPhone/iPad is connected to your Wi-Fi Router. Run the Hubble for Motorola Monitors App, enter your account information, read through the Terms of Service, and then select By signing up you agree to our Terms & Conditions before you tap SIGNUP. (Picture i1) Getting started - Connecting Devices 15 ENGLISH Note:

If you already have a Hubble App account, please select Already have an Account? to go to the next step (Picture i1). 3.7.4 Add the Camera to your account Tap on the lower right corner of the screen to add camera. (Picture i2). i1 i2 16 Getting started - Connecting Devices The following setup instructions will appear on the screen. (Pictures i3) Plug in and switch on the camera, and wait for a couple of minutes for it to warm up. The following setup instructions will appear on the screen. (Picture i4, i5) i3 i4 i5 Getting started - Connecting Devices 17 ENGLISH To pair the camera - Press and hold the PAIR button on the back of the Camera for 8 seconds. You will then hear a beep tone, followed by a voice prompt indicating that the Camera is ready for pairing. Pair the device Go to Settings > Wi-Fi menu on your iPhone/iPad. (Picture i5) Select your Camera from the list of networks. (Picture i6) Return to the Hubble app to resume setup and press Next (Picture i7) Your device will detect available networks (Picture i8) i6 i7 i8 18 Getting started - Connecting Devices Select your Wi-Fi network. (Picture i9) Enter your Wi-Fi password and tap OK. (Picture i10) i9 i10 It will take a few minutes for the Camera Unit to connect to the Wi-Fi network before showing the connection status. Select what your camera will be used for. (Picture i11) Give your camera a name. (Picture i12) i11 i12 Getting started - Connecting Devices 19 ENGLISH 4. Camera Functions 4.1 Connecting the Camera Unit to power Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket on the back of the Camera Unit. The Blue LED will illuminate after approximately 30 seconds if the camera is set up. The Red LED will flash if the camera is not set up. (Note: To switch off the device, unplug the power supply.) Run the Hubble App on your smart device. 4.2 Overview of the Features on Hubble App Event History Tap Event History to access the video record list that is triggered by Motion or Sound detection. Delete Events event(s). Tap to delete selected Photo/Video Take a photo or record a video from your Camera. Tap the Video icon to activate Video function. Tap and hold the red button start recording and release to stop. to Tap the Camera icon to switch to Camera mode. You can capture photos from Camera view. Note:

Photos and videos will be stored in the internal flash memory of your smart device, and can be accessed via the Gallery

(Android Device). To play videos, please use the Hubble App. or Media Player 20 Camera Functions Lullabies Two-way communication Speaker Setting Tap to access the Melody menu and select one of the 5 pre-set melodies you wish to play on your Camera Unit. Tap to activate the function. Press the round button Unit. Toggle the button again to listen to the audio feedback from the Camera Unit. once to speak through the Camera Tap to toggle speaker on or off. You can change the Camera settings by tapping on the Settings icon. Add Camera Enter Add Camera procedures. Camera Functions 21 ENGLISH 5. Working with PC/Notebook Go to http://www.hubbleconnected.com/motorola/login/

Enter your User Name and Password and then click Login if you have already created an account. Click on the Camera list paired in your account via Android device or iPhone/iPad and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming. On the website, you can change the Settings by following the Menu instructions. 22 Working with PC/Notebook 6. Procedure for Resetting the Camera Note: If your Camera is moved from one router (e.g. home) to another (e.g. office) or you have Camera setup issues, then the Camera must be reset. Please reset the Camera with the following procedures:

1. Switch off the camera by unplugging the power supply from the electrical 2. Press and hold the PAIR button, then plug the powers supply back into the 3. Release the PAIR button when you hear a confirmation beep and wait for 4. You can add your Camera again by following the steps in section 3.2.4 for the Camera Unit to complete an internal reset procedure. The Red LED will begin to flash when the Camera Unit is reset successfully. electrical socket. socket. Android devices or in section 3.3.4 for iOS devices. Procedure for Resetting the Camera 23 ENGLISH 7. Help Noise interference To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi Camera Unit. Use of other 2.4 GHz products, such as Bluetooth systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi Camera Unit at least 5ft away from these types of products, or turn them off if they appear to be causing interference. Lost connection Check your Wi-Fi settings. If necessary reconnect your Wi-Fi. Ensure the Wi-Fi Camera Unit is switched ON. Wait a few minutes to connect to the Wi-Fi system. If you forget your password If you do not remember your password, tap Forgot password and submit your e-mail address. A new password will be sent to your e-mail address immediately. Troubleshooting for Wi-Fi Internet Viewing Category Account Account Account Problem Description / Error I am unable to login even after registration. I receive an error message saying:

Email ID is not registered. What do I do if I forgot my password?

Solution Please check your user name and password. Please ensure that you have registered with us. Tap Create Account to create an account. Click on the Forgot Password link on https://app.hubbleconnected. com/ #lostpassword OR on your Android or iOS application. An email will be sent to your registered email address. 24 Help Account I am unable to receive a new password although I have used the Forgot password option. 1. The e-mail might have been sent to your Junk Mail Folder. Please check your Junk Mail Folder. 2. There might be a delay in getting your e-mail. Please wait a few minutes and refresh your email account. Connectivity Issues I get a message: We are having problems accessing your camera. This could be due to lack of internet connection. Please wait and try again later. Viewing Camera When I am in remote mode, the video stops after 5 minutes. How do I view for longer?

Features The sound alert setting threshold is not right. 1. Please try again in a few minutes. This could be because of any issue with your internet connection. If the problem remains, please restart your Camera to check if this fixes the problem. 2. 3. Please restart your Wireless Router. When you are accessing your Camera via a network different from your home network (over the internet) your video times out after 5 minutes. You can click on the Camera again from the Android/iOS application to start streaming again. If you are accessing from your webbrowser, then you can press on the Reload button to start viewing your Camera video stream again. You can Adjust Sound Sensitivity to trigger notifications under Camera Setting menu. Help 25 ENGLISH Setting Up While I am adding a new Camera to my account, I am not able to find any Cameras to add. General What are the supported browsers for accessing from my PC/ Mac?

General What is the significance of LED?

Connectivity issues I am not able to access my Camera. If you are trying to add a Camera which has previously been added into your account or another account, you will first have to reset the Camera. This can be done by following the re-

setting procedure stated in section 6 of this guide. We recommend using Google Chrome 24 or above. However the following browsers are also supported: Internet Explorer 9.0 or above (for PC), Safari 6.0 or above

(for Mac) or Firefox 18.0 or above

(both PC or Mac). The LED indicates the following status:

LED flashing Red: Your Camera is booting up. After a voice prompt the camera is booted up and ready for pairing. LED Cycling Blue/Purple/Red: Your camera is in pairing mode. LED Solid Blue: The camera is paired and set up to your account. LED Flashing Blue: The camera is live streaming. LED Off - No Power to camera. Please check if the Camera is within Wi-Fi range. Please try to move the Camera closer to the router for better Wi-Fi connectivity and try again. 26 Help Setting Up Connectivity Issues Camera General During setup on devices for Android and iOS, I am not able to find my Camera during the last step and the setup fails. Even though I am accessing my Camera from the same Wi-Fi network, I still find my Camera is shown as remote. I can only access it for 5 minutes at a time. When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do?

Which platforms are supported for accessing my Camera?

Please reset the Camera to setup mode and try again. Press and hold the PAIR button on the back of the camera using the tool provided until you hear a beep and voice prompt Ready for pairing. When the Camera LED is off, this indicates that it is in setup mode. Now restart the setup from your smartphone again. Please check your wireless router settings. For example, for Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. Please upgrade your firmware. This takes around 5 minutes. We push upgrades from time to time to improve the Camera features. Minimum requirement:

Windows 7*

*Java browser plug-in needed Mac OS version 10.7 Chrome version 24 Internet Explorer version 9 Safari version 6 Java version 7 Firefox version 18.0 Adobe Flash Player 15.0 Android 4.4.2 iPhone/iPad iOS version 9.0 Help 27 ENGLISH General General I do not hear any sound when I am accessing a remote Camera. What is the meaning of Local Camera and Remote Camera?

General How do I download the App for Android and iOS devices?

You can tap on the speaker icon in the video stream screen to hear audio. By default the audio is not ON when you are accessing a remote Camera. When you are accessing your Camera from the same wireless network (Home) in which it is configured, it is a Local Camera. When you are accessing your Camera away from your home it is a Remote Camera. You may be using 3G, 4G or 4G LTE or a Wi-Fi connection outside of your home. Android:

Open the Google Play Store on your Android device. Select Search Type in Hubble for Motorola Monitors The results will show the Hubble App Select to install it iOS Device:

Open the App StoreTM Select Search Type in Hubble for Motorola Monitors The results will show the Hubble App Select to install it 28 Help Setting up Features When the video is cut off, the application attempts to reconnect and this results in lost sound and choppy video. How many users can access the Camera at one time?

Connectivity issues I found interference caused by my other webcam devices. You will need to turn off the Auto Lock function of your device to ensure continuous video/audio streaming. If you are accessing in Local Mode, two users are supported, after two users all streaming will go through the remote server. This allows for unlimited user access to a single Camera at one time. Video streaming performance is related to internet bandwidth, especially if you have 2 or more video streaming devices that are working through the same router. Help 29 ENGLISH 8. General Information If your product is not working properly, read this Quick Start Guide or the Users Guide of one of the models listed on page 1. Contact Customer Service:

US and Canada 1-888-331-3383 Email: support@motorolastore.com Consumer Products and Accessories Limited Warranty (Warranty) Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD (BINATONE). What Does this Warranty Cover?

Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product (Product) or certified accessory (Accessory) sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your exclusive warranty and is not transferable. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE. Who is covered?

This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do?

BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts. 30 General Information What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another. Products Covered Consumer Products Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for Ninety

(90) days from the date returned to the consumer, whichever is longer. Consumer Accessories Consumer Products and Accessories that are Repaired or Replaced General Information 31 ENGLISH Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage

(cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. 32 General Information How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

US and Canada 1-888-331-3383 Email: support@motorolastore.com You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorized Repair Center. To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a warranty card was included in your box, a completed warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number. These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent, employee or staff of BINATONE, that may have been made in connection with the said purchase. General Information 33 ENGLISH FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-

3(B)/NMB-3(B) 34 General Information WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the users authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s):

Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. IC Radiation Dclaration dexposition Attention: Cet metteur doit tre install pour fournir une distance de sparation dau moins 20 cm de toute personne. General Information 35 ENGLISH 9. Technical Specifications Camera Unit Wi-Fi Image sensor Colour CMOS 1M Pixels 2400 - 2483.5MHz (802.11 b/g/n) Lens IR LED Power Adapter:

f=2.80mm, F=2.5 8 pcs Zhong Shan Xiao Lan Hui Yang Electric Appliance Factory HS06-050100US, Input: 100-240V 50/60Hz 0.15A;

Output: 5V 1000mA. Memory card Micro-SD type, up to 32GB Class 4 or above 36 Technical Specifications Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylised M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. Internet Explorer and Windows are trademarks of the Microsoft group of companies. Firefox is a registered trademark of the Mozilla Foundation. Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated. Java is a registered trademark of Oracle and/or its affiliates. All other trademarks are the property of their respective owners. 2019 Motorola Mobility LLC. All rights reserved. US_EN Version 1.0 Printed in China

Appendix 4 EUT Internal Photos Test Report No.: 50275681 001 Appendix 4 Page 1 of 7 Internal View Internal View Test Report No.: 50275681 001 Appendix 4 Page 2 of 7 Internal View Internal View Test Report No.: 50275681 001 Appendix 4 Page 3 of 7 Internal View Internal View Test Report No.: 50275681 001 Appendix 4 Page 4 of 7 Internal View Internal View Test Report No.: 50275681 001 Appendix 4 Page 5 of 7 Internal View Internal View Test Report No.: 50275681 001 Appendix 4 Page 6 of 7 Internal View Internal View Test Report No.: 50275681 001 Appendix 4 Page 7 of 7

Appendix 3 EUT External Photos Test Report No.: 50275681 001 Appendix 3 Page 1 of 3 External View External View Test Report No.: 50275681 001 Appendix 3 Page 2 of 3 External View Test Report No.: 50275681 001 Appendix 3 Page 3 of 3

Model: Peekaboo Twin-W Use only Power Supplies listed in the users guide. HVIN: PEEKABOO FCC ID: VLJ-PEEKABOO IC: 4522A-PEEKABOO Model: Peekaboo Twin-W Use only Power Supplies listed in the users guide. HVIN: PEEKABOO FCC ID: VLJ-PEEKABOO IC: 4522A-PEEKABOO 109319F000001 25X5mm Serial Number Stick on Unit bottom, Gift box and Carton

- Model number: 10931 = Peekaboo

- Produce date: 9=Year (2019), F=Month

- Serial no. start from 000001 (6 digits)

- Code Format: code 128

- White blackground black letters S/N :

xxxxx9A000001 xxxxxx: Model no. 10931 for Peekaboo Use 9 for year 2019;

use A as Jan, B as Feb, C as Mar .. L as Dec Serial number, start from 000001(6 digits) Camera HDXXXX-XXXXXX UDID CODE Lable 26X6mm Warning Tag (for North America) 1) Printing: Orange PANTONE 151C. 2) Material: 50# Polyester Matte, PP COATING. 3) Size: 45 x 225 MM

BINATONE TELECOM PLC 85 Frampton Street London NW8 8NQ, United Kingdom Tel: +44(0) 20 8955 2700 e-mail: binatoneuk@binatonetelecom.co.uk Fax: +44(0) 20 8344 8877 To Whom It May Concern:

Please be advised that Applicant Name:

Address:

Binatone Telecom Plc. 85 Frampton Street, London, NW8 8NQ, United Kingdom City:

Country:

London United Kingdom authorizes, Benny Lau , Senior Project Manager at TV Rheinland Hong Kong Ltd. to act on our behalf, until otherwise notified, for applications submitted to a Telecommunication Certification Body (TCB) recognized by the FCC. We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C.862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you for your attention to this matter. Signature:

Name:

Title:

Patrick Cheung Senior Product Manager C:\Documents and Settings\wanp\My Documents\Job\temp\20070116-template (FCC doc)\letters\Declaration of authorization (FCC) v3.0.doc Page 1 / 1

BINATONE TELECOM PLC 85 Frampton Street London NW8 8NQ, United Kingdom Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: binatoneuk@binatonetelecom.co.uk Applicant Name: Binatone Telecom Plc. Address:

City:

Country:

85 Frampton Street, London, NW8 8NQ, United Kingdom London United Kingdom Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to 47 CFR Section 0.457 and 0.459, the applicant hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application for FCC ID: VLJ-PEEKABOO Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signature:

Name:

Title:

Date:

Patrick Cheung Senior Product Manager 26-Jul-2019

Difference Declaration Original Model No. Adding Model No.

:

:

PEEKABOO PEEKABOO,PEEKABOO-2,PEEKABOO-

3,PEEKABOO-4,PEEKABOO-W,PEEKABOO-

W2,PEEKABOO-W3,PEEKABOO-W4,PEEKABOO TWIN,PEEKABOO TRIPLE, PEEKABOO QUAD To whom it may concern, We, Binatone Telecom Plc. would like to declare those models are identical in electrical circuit design and PCB layout.The only difference is model name and color of enclosure :

Model No. PEEKABOO PEEKABOO-2 PEEKABOO-3 PEEKABOO-4 PEEKABOO-W PEEKABOO-W2 PEEKABOO-W3 PEEKABOO-W4 PEEKABOO-W PEEKABOO TWIN PEEKABOO TRIPLE PEEKABOO QUAD Sincerely yours, Applicant Address Signature Name and title Email Tel. Date

:

:

:

:

:

:

:

Baby Unit

(Qty) x1 x2 x3 x4 x1 x2 x3 x4 x1 x2 x3 x4 Parent Unit

(Qty) None None None None None None None None None None None None Colour (if any) Black &white Black &white Black &white Black &white Black &white Black &white Black &white Black &white Black &white Black &white Black &white Black &white Binatone Telecom Plc. 85 Frampton Street, London, NW8 8NQ, United Kingdom Patrick Cheung / Senior Product Manager patrick.cheung@binatoneglobal.com

+852 21163659 09 August 2019