FCC ID: VLJ-LUX64BU Video baby monitor

Users Guide 4.3" HD Wi-Fi Video Baby Monitor Models: LUX64CONNECT, LUX64CONNECT-2, LUX64CONNECT-3, LUX64CONNECT-4 The features described in this Users Guide are subject to modifications without prior notice. Welcome... to your new Motorola Digital Video Baby Monitor!

Thank you for purchasing the Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product-related questions, please call:

US and Canada 1-888-331-3383 E-mail: support@motorolahome.com This User's Guide provides you with all the information you need to get the most from your product. Before you use the Digital Video Baby Monitor, we recommend that you fully charge the battery that is pre-installed in the Parent Unit, so that it continues to work if you disconnect it from the power supply. Please read the Safety Instructions on pages 8 - 10 before you install the Units. Got everything?

1 x Parent Unit 1 x Baby Unit (Camera) 1 x Power adapter for Parent Unit 1 x Power adapter for Baby Unit In multi-camera packs, you will find one or more additional Camera Units with power adapters. Overview of the Parent Unit 1 2 3 4 5 6 7 17 16 14 15 8 9 10 11 12 13 1. Display (LCD screen) 2. Charging LED RED when mains power connected. 3. Parent Unit ON/OFF LED (Green) 4. Audio Level LEDs (Green, Green, Amber, Red) 5. Volume Down Press to decrease Volume level. 6. Volume Up Press to increase Volume level. 7. Microphone 8. Display ON/Microphone 9. MENU button Press to open / close the Menu options. 10. Navigation button Move Up/Down/Right/Left menu options. 11. OK button 12. TALK button Press and hold to speak to your baby. 13. Power button Press and Hold to turn the Parent Unit ON/OFF. VIDEO ON/OFF button Press to turn the LCD screen ON/OFF (Note: audio is maintained.) 14. RESET button (recessed - use small pin) 15. Power Socket 16. Stand 17. Speaker Parent Unit menu icons Signal Level (5 Levels) T Talk Mode Night Vision Mode (Video also changes to Black/White) Volume Level Control (5 Levels) Zoom Level Control (1X, 2X) Brightness Level Control (8 Levels) Lullaby Control (5 Sound Selections) Alarm Setting (6h, 4h, 2h, OFF) Temperature scale select (oC / oF) Readings display in BLUE, but turn RED > 29C / 84F, or < 14C /

57F Displays HH oC / oF if >36oC / 97oF. Displays LL oC / oF if < 1oC / 34oF. Camera Control (scan, view, add, delete) V Set Screen Off Timer (Off

, 5 min, 30 min, 60 min) Indicates the screen off timer is set Volume Level Control (8 Levels) No Baby Unit detected View multiple cameras on screen. Available when you have more than 1 Baby Unit (Camera). Overview of Your Baby Unit 1 2 3 4 5 6 7 8 9 10 1. Photo Sensor (Night Vision Mode) 2. Camera Lens 3. Infrared LEDs (x 8, for night vision) 4. High Sense Microphone 5. Magnet mount 6. Power/Link indicatior 7. PAIR button 8. Speaker 9. Power Socket 10 Temperature Sensor Important guidelines for installing your Digital Video Baby Monitor To use your Baby Unit and Parent Unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic door or reinforced concrete, between the Baby Unit and Parent Unit may block the radio signal. The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TVs, computers, cordless or mobile phones, fluorescent lights or dimmer switches. Other 2.4GHz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, microwave ovens or other Baby Monitors, may cause interference with this product, so keep the Baby Monitor at least 5ft (1.5m) away from these types of product, or switch them off if they appear to be causing interference. If the signal is weak, try moving the Parent and/or the Baby Unit to different positions in the rooms. Table of contents 2.1 2.2 2.3 3.1 3.2 3.3 3.4 3.5 1. Safety Instructions ..................................................................................... 8 2. Getting Started........................................................................................ 11 Baby Unit Power Supply............................................................................ 11 Parent Unit Power Supply ......................................................................... 12 Registration (Pairing) ................................................................................ 13 3. Using the Baby Monitor........................................................................... 14 Setting Up.................................................................................................. 14 Night Vision Mode .................................................................................... 14 Talk Mode.................................................................................................. 14 Video ON/OFF ......................................................................................... 14 Temperature Display (HH C / F or LL C / F)...................................... 14 4. Parent Unit Menu Options ...................................................................... 15 4.1 Volume ...................................................................................................... 15 4.2 Brightness .................................................................................................. 15 4.3 Lullaby ....................................................................................................... 15 4.4 Zoom ......................................................................................................... 15 4.5 Alarm ......................................................................................................... 15 4.6 Camera Control ........................................................................................ 16 Add (pair) a camera .................................................................. 16 4.6.1 View a camera ........................................................................... 16 4.6.2 Delete a camera ........................................................................ 17 4.6.3 4.6.4 Scan camera .............................................................................. 17 Temperature ............................................................................................. 17 Power Saving Mode.................................................................................. 18 View multiple cameras on screen ............................................................ 18 5. Wi-Fi Internet Viewing.......................................................................... 19 5.1 Minimum System Requirements .............................................................. 19 5.2 Getting Started - Connecting Devices..................................................... 20 5.2.1 Setup ......................................................................................... 20 User Account and Camera Setup on Android Devices....................... 21 Power ON and Connect the Camera ...................................... 21 5.3.1 Download Hubble for Motorola Monitors App ........................ 21 5.3.2 Run Hubble for Motorola Monitors App on Android 5.3.3 device ........................................................................................ 21 Add the Camera to your account ............................................. 22 5.3.4 User Account and Camera Setup on iPhone/iPad ............................. 25 Power ON and Connect the Camera ...................................... 25 5.4.1 5.4.2 Download Hubble for Motorola Monitors App ........................ 25 4.7 4.8 4.9 5.4 5.3 6 Table of contents 5.5.1 5.5.2 5.4.3 5.4.4 Run Hubble for Motorola Monitors App on iPhone/iPad ... 25 Add the Camera to your account ............................................. 26 5.5 Camera Functions:.................................................................................... 31 Connecting the Camera Unit to power ................................... 31 Overview of the Features on Hubble App ...............................31 5.6 Working with PC/Notebook..................................................................... 34 5.7 Procedure for Resetting the Camera .......................................................34 6. Disposal of the Device (Environment).................................................... 35 7. Cleaning .................................................................................................. 36 8. Help.......................................................................................................... 37 9. General Information ................................................................................ 45 10. Technical Specifications ......................................................................... 51 H S I L G N E Table of contents 7 1. Safety Instructions WARNING:

Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided. 8 Safety Instructions CAMERA SET UP & USE:

Choose a location for the Baby Unit that will provide the best view of your baby in his/her crib. Place the Baby Unit on a flat surface, such as a dresser, bureau or shelf, or mount the Baby Unit on a wall securely using the keyhole slots in the underside of the stand. NEVER place the Baby Unit or cords within the crib. H S I L G N E WARNING This Digital Video Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device. Adult assembly is required. Keep small parts away from children when This product is not a toy. Do not allow children to play with it. This Digital Video Baby Monitor is not a substitute for responsible adult Keep this user's guide for future reference. Keep the cords out of reach of children. Do not cover the Digital Video Baby Monitor with a towel or blanket. Test this monitor and all its functions so that you are familiar with it prior to assembling. supervision. actual use. Do not use the Digital Video Baby Monitor in damp areas or close to water. Do not install the Digital Video Baby Monitor in extreme cold or heat, direct sunlight, or close to a heat source. Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. Only insert a battery pack of the same type. Do not touch the plug contacts with sharp or metal objects. Connect the power adapters to easily accessible electrical outlet. Safety Instructions 9 CAUTION There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. IC Radiation Dclaration d'exposition Attention: Cet metteur doit tre install pour fournir une distance de sparation d'au moins 20 cm de toute personne. 10 Safety Instructions 2. Getting Started 2.1 Baby Unit Power Supply H S I L G N E 1. Connect the power adapter to an electrical outlet and insert the plug into 2. the power socket on the back of the Baby Unit (Camera). Slide the ON/OFF switch to the ON position. The power indicator LED will light up in blue. 3. To switch off the Baby Unit, slide the ON/OFF switch to the OFF position. NOTE Only use the enclosed Power Adapter (5V DC / 1000mA). Getting Started 11 2.2 Parent Unit Power Supply IMPORTANT The Parent Unit is assembled with a built-in rechargeable battery pack (Lithium ion battery 1880mAh), please charge it for 16 hours before initial use. The battery is not a user-accessible item. Please contact the helpline if you think it needs replacing. 1. Connect the micro USB plug of the power adapter to the Parent Unit and the other end to a suitable electrical outlet. Only use the enclosed power adapter (5V DC / 1000mA) with the DC plug. 2. Press and hold the 0 POWER ON/OFF button for 3 seconds to switch ON the Parent Unit. 3. Once the Baby and Parent Units are switched on, the display on the Parent 4. Unit will show the video captured by the Baby Unit. If there is no connection or you are out of range, the unit will beep every few seconds. Move the Parent Unit closer to the Baby Unit until the link is re-

established. 5. Press and hold the 0 POWER ON/OFF button, until the progress bar finishes scrolling, to switch OFF the Parent Unit. NOTE turns RED, and the Parent Unit When the battery is low, the battery icon will beep every 15 seconds. The battery needs to be recharged; it will take16 hours to charge fully. 12 Getting Started H S I L G N E Registration (Pairing) 2.3 The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below:

1. Press the M button of the Parent Unit and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and the del/

add/

view/

scan menu will pop up. 3. Press the + UP button or - DOWN button to select

O button to confirm. add, and press the 4. Camera

will pop up. Press the + UP button or - DOWN button to select the desired Camera, and press the O button to start searching for a camera unit. Note: If a camera is currently paired with the Parent Unit, its camera location (with a * against it) cannot be selected for a new registration. 5. Press and hold the PAIR button on the underside of the Baby Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear. NOTE A camera can only be registered to one Parent Unit at any one time. If a particular Baby Unit was registered previously, registering this current Baby Unit again will cancel its old registration. Getting Started 13 3. Using the Baby Monitor 3.1 Place the Baby Unit in a convenient location (e.g. on a table) and point the Setting Up camera lens towards the area you want to monitor. Adjust the angle of the Baby Unit's camera until you are satisfied with the image shown on the Parent Unit. NOTE Do not place the Baby Unit within the baby's reach! If there is interference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment. Night Vision Mode 3.2 The Baby Unit has 8 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the top of the Unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the Parent Unit will display in black and white. The top of the screen. icon will be displayed at the Talk Mode 3.3 Press and hold the TALK button T on the Parent Unit to talk to your baby through the Baby Units loudspeaker. The T icon will be displayed at the top of the LCD screen. Video ON/OFF VIDEO On/Off button to turn the LCD screen on or off, whilst still 3.4 Press leaving the audio monitor on. V Temperature Display (HH C / F or LL C / F) 3.5 The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen. The readings will turn RED if the temperature goes above 29C / 84F or below 14C / 57F. The reading will change to HH C / F if the temperature goes above 36C / 97F. The reading will change to LL C / F if the temperature goes below 1C / 34F. 14 Using the Baby Monitor Volume 4. Parent Unit Menu Options 4.1 Press the Volume button + or - to adjust the volume level. The

(The default volume level setting is level 5, and level 0 is OFF.) icon will pop up and you can select the desired volume from level 0~8. H S I L G N E Brightness 4.2 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until 3. Press the + UP button or - DOWN button to select the desired brightness is highlighted. from level 1 ~ 8. (The default brightness is level 4.) Lullaby 4.3 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted. 3. Press the + UP button or - DOWN button to select from the 5 sounds available. If a sound is selected, it will repeat continuously until it is deselected. (The default setting is OFF.) 4. To adjust the playback volume at the Baby Unit Camera, press O then the

+ UP button or - DOWN button when a sound is selected. Zoom 4.4 1. Press the M button and the menu bar will pop up with 2. Press the + UP button or - DOWN button to select 1X or 2X zoom. (The highlighted. default setting is 1X.) Alarm 4.5 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until 3. Press the + UP button or - DOWN button to select the alarm time (6h, 4h, is highlighted. 4. 2h). (The default setting is Alarm OFF.) If an alarm time is selected, the Parent Unit will beep for about 45 seconds after every 6, 4 or 2 hour period. Parent Unit Menu Options 15 4.6 Camera Control 4.6.1 Add (pair) a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and the del/

add/

view/

scan menu will pop up. 3. Press the + UP button or - DOWN button to select

O button to confirm. add, and press the 4. Camera

will pop up. Press the + UP button or - DOWN button to select the desired Camera, and press the O button to start searching for a camera unit. Note: If a camera is currently paired with the Parent Unit, its camera location (with a * against it) cannot be selected for a new registration. 5. Press and hold the PAIR button on the underside of the Baby Unit until the Parent Unit finds the camera, beeps and PAIR OK appears on the screen. The video from the camera will then appear. NOTE A camera can only be registered to one Parent Unit at any one time. 4.6.2 View a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and the del/

add/

view/

scan menu will pop up. 3. Press the + UP button or - DOWN button to select view, and press the O button to confirm. 4. Camera

will pop up. Press the + UP button or - DOWN button to select the desired camera, and press the O button to view the picture from that camera. Note: Only camera locations with a * can be selected. TIP You can also press the O button repeatedly to select the available camera options from scan.

16 Parent Unit Menu Options 4.6.3 Delete a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and 3. Press the + UP button or - DOWN button to select del, and press the add/

view/

scan menu will pop up. the del/

O button to confirm. 4. Camera

will pop up. Press the + UP button or - DOWN button to select the desired camera, and press the O button. 5. Press the + UP button or - DOWN button to select del, then press the O button to delete that camera. NOTE You are not allowed to delete the camera if there is only one registered camera in the system. H S I L G N E Scan camera 4.6.4 This function is only available when you have more than 1 Baby Unit (Camera). 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and 3. Press the + UP button or - DOWN button to select scan, and press the add/

view/

scan menu will pop up. the del/

O button to confirm. 4. The screen will then display images from different registered cameras in a loop of Camera

, changing about every 12 seconds. TIP You can also press the O button repeatedly to select the available camera options from scan.

Temperature 4.7 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until 3. Press the + UP button or - DOWN button to select C or F. is highlighted. Parent Unit Menu Options 17 Power Saving Mode 4.8 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until 3. Press the + UP button or - DOWN button to select auto video off after 5 is highlighted. V mins, 30 mins or 60 mins (if operating on batteries only). NOTE The audio will remain and you can press any key to switch the video back on. View multiple cameras on screen 4.9 This function is only available when you have more than 1 Baby Unit (Camera). When the Split Screen function is On, you can view multiple cameras on the screen. 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted. 3. Press the + UP button or - DOWN button to select Split Screen On

Off

. 4. When the Split Screen function is On, you can press the < LEFT button or

> RIGHT button/ + UP button or - DOWN button to switch between cameras to hear the audio from the selected camera. 18 Parent Unit Menu Options 5. Wi-Fi Internet Viewing 5.1 Minimum System Requirements H S I L G N E Web Portal Internet Explorer 9 Windows 7 Mac OS 10.7 Chrome 24 Safari 6 Java 7 Firefox 18.0 Adobe Flash Player 15.0 Android System Version 4.2 or above iPhone/iPad iOS Version 7.0 or above High Speed (Wi-Fi) Internet At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site: http://www.speedtest.net) Wi-Fi Internet Viewing 19 5.2 Getting Started - Connecting Devices How does it work?

LUX65CONNECT Camera Wi-Fi Router Access your Camera locally. View your Camera from any compatible device remotely. Hubble Service When a user tries to access the Camera, the Hubble server will authenticate the users identity before it grants access to the Camera. Setup 5.2.1 Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket on the back of the Camera Unit. Slide the ON/OFF switch to the ON position. The Camera Unit must be within range of the Wi-Fi router with which you want to connect. Make sure that you have the password of the router for the setup process. Behavior of the status Indicator LED:

Pairing and setting up Unconnected Connected Flashes slowly in red Flashes slowly in blue Lights up in blue Ready for connection Flashes slowly in blue Note You can only setup via a compatible smartphone or tablet, and not via a PC. 20 Wi-Fi Internet Viewing User Account and Camera Setup on Android Devices 5.3 What you need Wi-Fi Camera Unit Power adapter for the Camera Device with AndroidTM system version 4.2 and above 5.3.1 Power ON and Connect the Camera Connect the power adapter to an electrical outlet and insert the plug into the H S I L G N E micro USB socket on the back of the Camera Unit. Make sure that the ON/OFF switch is in the ON position. The Cameras Red LED flashes after the Camera has finished booting. When you hear one beep, this means that the Camera is ready for setup. 5.3.2 Download Hubble for Motorola Monitors App Go to Google Play Store to search for "Hubble for Motorola Monitors". Download "Hubble for Motorola Monitors" App from Google Play Store and install it on your Android device 5.3.3 Run Hubble for Motorola Monitors App on Android device Ensure that your Android device is connected to your Wi-Fi router. Run "Hubble for Motorola Monitors" App, enter your account information, read through the Terms of Service, then select "I agree to the Terms of Use"

before you tap Create. (Picture A1) Note If you already have a Hubble App account, please select Already have an Account? to go to the next step. Wi-Fi Internet Viewing 21 A1 5.3.4 Add the Camera to your account Tap on the top right corner of the screen to add camera. (Picture A2) The following setup instructions will appear on the screen. (Picture A3) A2 A3 Plug in and switch on the camera, and wait for a couple of minutes for it to warm up. Tap Continue when the Camera LED starts to blink. 22 Wi-Fi Internet Viewing The following setup instructions will appear on the screen. (Picture A4) H S I L G N E A4 Press and hold the PAIR button on the Camera Unit for 3 seconds. You will then hear a beep tone, followed by a voice prompt indicating that the Camera is ready for pairing. Tap Continue. The App will automatically search for and connect to your Camera as shown in the pictures below. (Pictures A5, A6) The blue/red color LED on the Camera Unit will flash. A5 A6 Wi-Fi Internet Viewing 23 Select your Wi-Fi Network, enter your password and then tap Connect.

(Pictures A7, A8) A7 A8 It will take a few minutes for the Camera to connect to the Wi-Fi network before showing the connection status. (Pictures A9, A10) If connection fails, please tap Retry and repeat the steps starting from 5.3.4. A9 A10 Tap View Camera to view the video captured by the Camera Unit. The LED indicator on the Camera Unit will light up in blue. 24 Wi-Fi Internet Viewing User Account and Camera Setup on iPhone/iPad 5.4 What you need Wi-Fi Camera Unit Power adapter for the Camera iPhone / iPad with iOS version 7.0 and above 5.4.1 Power ON and Connect the Camera Connect the power adapter to an electrical outlet and insert the plug into the H S I L G N E micro USB socket at the back of the Camera. Make sure that the ON/OFF switch is in the ON position. The Camera's red LED flashes after the Camera has finished booting. When you hear one beep, this means that the Camera is ready for setup. 5.4.2 Download Hubble for Motorola Monitors App Go to App Store to search for "Hubble for Motorola Monitors". Download "Hubble for Motorola Monitors" App and install it on your iPhone/iPad. 5.4.3 Run Hubble for Motorola Monitors App on iPhone/iPad Ensure that your iPhone/iPad is connected to your Wi-Fi Router. Run the "Hubble for Motorola Monitors" App, enter your account information, read through the Terms of Service, and then select "I agree to the Terms of Service" before you tap Create. (Picture i1) NOTE If you already have a Hubble App account, please select Already have an Account? to go to the next step (Picture i1). i1 Wi-Fi Internet Viewing 25 5.4.4 Add the Camera to your account Tap on the top right corner of the screen to add camera. (Picture i2) The following Bluetooth setup instructions will appear on the screen. (Picture i3) i2 i3 26 Wi-Fi Internet Viewing Tap Settings and activate Bluetooth on your iPhone/iPad. (Pictures i4,i5) H S I L G N E Press the HOME key to return to the home screen, then tap on "Hubble for i4 i5 Motorola Monitors" App to resume setup. The following setup instructions will appear on the screen. (Picture i6) Note that if Bluetooth is on, you will be brought to this step directly. Wait for a couple of minutes for the Camera Unit to warm up and tap Continue when the Camera LED indicator starts to blink. i6 Wi-Fi Internet Viewing 27 The following will appear on the screen. (Pictures i7, i8) Name the location of your Camera Unit and tap Continue. (Pictures i9, i10) i7 i9 i8 i10 28 Wi-Fi Internet Viewing The Camera Unit will search for the Wi-Fi network (Picture i11) and display a list of available networks. (Picture i12) H S I L G N E i11 i12 Select your Wi-Fi network and tap Continue. (Picture i13) Enter your Wi-Fi password and tap Next. (Picture i14) i13 i14 It will take a few minutes for the Camera Unit to connect to the Wi-Fi network before showing the connection status. (Pictures i15, i16) Wi-Fi Internet Viewing 29 If connection fails, tap Retry and repeat the steps starting from 3.3.4. i15 i16 Tap View Live Camera to view the video captured by the Camera Unit. The LED indicator on the Camera Unit will light up in blue. 30 Wi-Fi Internet Viewing 5.5 Camera Functions:

5.5.1 Connecting the Camera Unit to power Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket on the back of the Camera Unit. Slide the ON/OFF switch to the ON position. The power indicator LED will light up in green. (Note: To switch off the device, slide the ON/OFF switch to OFF.) Run the Hubble App on your smart device. 5.5.2 Overview of the Features on Hubble App Menu Tap Cameras to access the camera list. H S I L G N E Photo/Video Take a photo or record a video from your Tap Event Log to access the video record list that is triggered by Motion or Sound detection. Tap Account to access user Profile, subscription Plan, Notifications setting, Remote Connection Setting and About Hubble Camera. Tap the Video icon to activate Video function. Tap and hold the red button start recording and release to stop. to Tap the Camera icon to switch to Camera mode. You can capture photos from Camera view. NOTE Photos and videos will be stored in the internal flash memory of your smart device, and can be accessed via the Gallery or Media Player

(AndroidTM Device). To play videos, please use the Hubble App. Wi-Fi Internet Viewing 31 Lullaby Temperature Measure Tap to access the Melody menu and select one of the 5 pre-set melodies you wish to play on your Camera Unit. The temperature reading from the temperature sensor at the back of the Camera Unit will display on the screen of your Android device. The readings will turn RED if the temperature goes beyond the High/Low temperature that was set in your Account. Two-way communication Tap to activate the function. Press the round button Unit. Toggle the button again to listen to the audio feedback from the Camera Unit. once to speak through the Camera Speaker Tap to toggle speaker on or off. Zoom Slide the scroll bar on the right hand side of the screen to zoom in or zoom out. You can also use the pinch-in and pinch-out gestures to zoom out or zoom in a picture. To use pinch-to-zoom gesture, your device must support multi-touch technology. 32 Wi-Fi Internet Viewing Camera Setting H S I L G N E You can change the Camera settings by tapping on the Tap Details to review Camera Name, Cloud Settings icon. Subscription, Change Image, Timezone, Camera Model, Firmware Version and Delete All Events. Tap Notifications to set the sensitivity of Sound Detection, Motion Detection and to set Alerts for High temperature (Up to 33 oC or 91 oF) /

Low temperature (down to 10o C or 50 oF). Tap Settings to set Ceiling mount, Brightness and Volume. Add Camera Enter Add Camera procedures. Delete All Events Tap to delete all events. Select Events Check the box to select recorded event(s). Edit Events Tap to select and delete event(s). Delete Events Tap to delete selected event(s). Wi-Fi Internet Viewing 33 5.6 Working with PC/Notebook Go to https://app.hubbleconnected.com/#login Enter your User Name and Password, and then click Login if you have already created an account. Click on the Camera list paired in your account via Android device or iPhone/iPad, and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming. On the website, you can change the Settings by following the menu instructions. Procedure for Resetting the Camera 5.7 Note: If your Camera is moved from one router (e.g. home) to another (e.g. office) or you have Camera setup issues, then the Camera must be reset. Please reset the Camera with the following procedures:

Slide the ON/OFF switch to OFF. 1. 2. Press and hold the PAIR button, then slide the ON/OFF switch to ON. 3. Release the PAIR button when you hear a confirmation beep and wait for the Camera Unit to complete an internal reset procedure. The LED indicator will turn red and flash slowly when the Camera Unit is reset successfully. 4. You can add your Camera again by following the steps in section 5.3.4 for AndroidTM devices or in section 5.4.4 for iOS devices. 34 Wi-Fi Internet Viewing 6. Disposal of the Device (Environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. H S I L G N E Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment. Please contact your local authorities in case you need more information on the collection points in your area. Dispose of the battery pack in an environmentally-friendly manner according to your local regulations. Disposal of the Device (Environment) 35 7. Cleaning Clean your Digital Video Baby Monitor with a slightly damp cloth or with an anti-

static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care Do not clean any part of the Digital Video Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. Keep your Digital Video Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet. Every effort has been made to ensure high standards of reliability of your Digital Video Baby Monitor. However, if something does go wrong, please do not try to repair it yourself - contact Customer Service for assistance. IMPORTANT Always switch off and disconnect the power adapter before cleaning your Digital Video Baby Monitor. 36 Cleaning H S I L G N E 8. Help Display No display Try recharging or replacing the battery pack. Reset the Units. Disconnect the battery pack of the Parent Unit and unplug both the Units' electrical power, then plug them back in. Is the Unit switched on?

Press and hold the ON/OFF button 0 on the Parent Unit to switch it ON. Is the correct camera selected? Change the camera number, if necessary. Is the video display turned on? Press the VIDEO ON/OFF button V to turn it ON. When operating using batteries only, the display will go blank after 5 minutes or 30 minutes or 60 minutes to save power (depending on video settings). The Unit is still active and will give you audio alerts. You can reactivate the screen by pressing any button. Registration If the Baby Unit has lost its link with the Parent Unit Try recharging or replacing the battery pack. If the Baby Unit is too far away it may be going out of range, so move the Baby Unit closer to the Parent Unit. Reset the Units by disconnecting them from the battery and electrical power. Wait about 15 seconds before reconnecting. Allow up to one minute for the Baby Unit and the Parent Unit to synchronize. See 2.3 Registration (Pairing), if there is a need to re-register the Units. Interference Noise interference on your Parent Unit Your Baby and Parent Units may be too close. Move them further apart. Make sure there is at least 3 to 6ft (1 to 2m) between the 2 Units to avoid audio feedback. lf the Baby Unit is too far away, it may be out of range. Move the Baby Unit closer to the Parent Unit. Help 37 Make sure that the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. Use of other 2.4 GHz products, such as wireless networks (Wi-Fi routers), Bluetooth systems, or microwave ovens, may cause interference with this product. Keep the Baby Monitor at least 5ft (1.5m) away from these types of products, or switch them off if they appear to be causing interference. If the signal is weak, try moving the Parent and/or Baby Unit to different positions in the rooms. Noise interference on your device To avoid background noise or echoes, ensure that there is enough distance between your device and the Wi-Fi Camera Unit. Use of other 2.4 GHz products, such as Bluetooth systems or microwave ovens, may cause interference with this product. Keep the Wi-Fi Camera Unit at least 5ft (1.5m) away from these types of products, or switch them off if they appear to be causing interference. Lost connection Check your Wi-Fi settings. If necessary, reconnect your Wi-Fi. Ensure that the Wi-Fi Camera Unit is switched ON. Wait a few minutes to make the connection with the Wi-Fi system. If you forgot your password If you do not remember your password, tap Forgot Password and submit your e-mail address. A new password will be sent to your e-mail address immediately. 38 Help Troubleshooting for Wi-Fi Internet Viewing Category Problem Solution Description / Error Account Account I am unable to login even after registration. Please check your user name and password. I receive an error message saying: "Email ID is not registered". Please ensure that you have registered with us. Tap Create Account to create an account. H S I L G N E Account What do I do if I forget my password?

Click on the "Forgot Password" link on https://app.hubbleconnected.com/

#lostpassword OR on your Android or iOS application. An email will be sent to your registered email address. Account I am unable to receive a new password although I have used the "Forgot password" option. 1. The e-mail might have been sent to your Junk Mail Folder. Please check your Junk Mail Folder. 2. There might be a delay in getting Connectivity Issues I get a message: We are having problems accessing your Camera. This could be due to the lack of an internet connection. Please wait and try again later. 2. your e-mail. Please wait a few minutes and refresh your email account. 1. Please try again in a few minutes. This could be because of any issue with your internet connection. If the problem remains, please restart your Camera to check if this fixes the problem. 3. Please restart your Wireless Router. Help 39 Viewing Camera When I am in "remote mode", the video stops after 5 minutes. How do I view for longer?

When you are accessing your Camera via a network different from your home network (over the internet) your video times out after 5 minutes. You can click on the Camera again from the Android/iOS application to start streaming again. If you are accessing from your web-

browser, then you can press on the Reload button to start viewing your Camera video stream again. You can Adjust Sound Sensitivity to trigger notifications under Camera Setting menu. If you are trying to add a Camera which has previously been added into your account or another account, you will first have to reset the Camera. This can be done by pressing and holding the PAIR button on the Camera for 5 seconds. We recommend using Google Chrome 24 or above. However the following browsers are also supported:

Internet Explorer 9.0 or above (for PC), Safari 6.0 or above (for Mac) or Firefox 18.0 or above (both PC or Mac). Features The sound alert setting threshold is not right. Setting Up While I am adding a new Camera to my account, I am not able to find any Cameras to add. General What are the supported browsers for accessing from my PC/

Mac?

40 Help General What is the significance of LED flashing?

Connectivity Issues I am not able to access my Camera. Setting Up During setup on devices for Android and iOS, I am not able to find my Camera during the last step and the setup fails. H S I L G N E A flashing LED indicates the following status:

Slow flashing: 1. Your Camera is in setup mode. You can add the Camera to your account in this mode. Out of the box, the Camera is in Setup mode. To reset to Setup mode, press and hold the PAIR button on the bottom of the Camera untill you hear a beep. Slow flashing: 2. The Camera is either connecting to the router or has lost the link to the router. Please ensure that the Camera is in the Wi-Fi signal range. LED is stable: The Camera is connected to the Wi-Fi network. Please check if the Camera is within Wi-Fi range. If the LED on your Camera is flashing slowly, please try to move the Camera closer to the router for better Wi-Fi connectivity and try again. Please reset the Camera to setup mode and try again. Press and hold the PAIR button on the bottom of the Camera untill you hear a beep. Wait for a minute for the Camera to restart. When the Camera LED is flashing, this indicates that it is in setup mode. Now restart the setup from your smartphone again. Help 41 Connectivity Issues Camera General Even though I am accessing my Camera from the same Wi-Fi network, I still find my Camera is shown as remote. I can only access it for 5 minutes at a time. When I try to view the Camera, I get a prompt for Camera firmware upgrade. What should I do?

Which platforms are supported for accessing my Camera?

General I do not hear any sound when I am accessing a remote Camera. Please check your wireless router settings. For example, for Buffalo brand routers there is an option called Wireless Isolation. Please disable this option. Please upgrade your firmware. This takes around 5 minutes. We push upgrades from time to time to improve Camera features. Minimum requirement:

Windows 7*

*Java browser plug-in needed Mac OS version 10.7 Chrome version 24 Internet Explorer version 9 Safari version 6 Java version 7 Firefox version 18.0 Adobe Flash Player 15.0 Android 4.2 iPhone /iPad iOS version 7.0 You can tap on the speaker icon in the video stream screen to hear audio. By default the audio is not ON when you are accessing a remote Camera. 42 Help General What is the meaning of

"Local Camera" and

"Remote Camera"?

When you are accessing your Camera from the same wireless network (Home) in which it is configured, it is a Local Camera. When you are accessing your Camera away from your home it is a Remote Camera. You may be using 3G, 4G or 4G LTE or a Wi-Fi connection outside of your home. H S I L G N E General How do I download the App for Android and iOS devices?

Android:

- Open the Google Play Store on your Android device.

- Select Search

- Type in "Hubble for Motorola

- The results will show the Hubble Monitors"

App

- Select to install it iOS Device:

- Open the App StoreSM

- Select Search

- Type in "Hubble for Motorola

- The results will show the Hubble Monitors"

App

- Select to install it You will need to turn off the Auto Lock function of your device to ensure continuous video/audio streaming. Setting up When the video is cut off, the application attempts to reconnect and this results in lost sound and choppy video. Help 43 Features How many users can access the Camera at one time?

Connectivity issues I found interference caused by my other webcam devices. If you are accessing in Local Mode, two users are supported, after two users all streaming will go through the remote server. This allows for unlimited user access to a single Camera at one time. Video streaming performance is related to internet bandwidth, especially if you have 2 or more video streaming devices that are working through the same router. 44 Help 9. General Information If your product is not working properly... 1. Read this User's Guide or the Quick Start Guide. 2. Visit our website: www.motorolahome.com 3. Contact Customer Service at US and Canada 1-888-331-3383 E-mail: support@motorolahome.com H S I L G N E To order a replacement battery pack for parent Unit, contact customer service. Consumer Products and Accessories Limited Warranty

("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE") What Does this Warranty Cover?

Subject to the exclusions contained below, BINATONE warrants that this Motorola branded product ("Product") or certified accessory ("Accessory") sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal consumer usage for the period outlined below. This Warranty is your exclusive warranty and is not transferable. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY BY STATE, PROVINCE OR COUNTRY. FOR CONSUMERS WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS CONFERRED BY THIS LIMITED WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. FOR A FULL UNDERSTANDING OF YOUR RIGHTS YOU SHOULD CONSULT THE LAWS OF YOUR COUNTRY, PROVINCE OR STATE. General Information 45 Who is covered?

This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do?

BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts. What Other Limitations Are There?

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another. 46 General Information Products Covered Consumer Products Consumer Accessories Consumer Products and Accessories that are Repaired or Replaced H S I L G N E Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and/or batteries that leak are covered by this Warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of MOTOROLA or BINATONE, are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. General Information 47 Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information?

To obtain service or information, please call:

US and Canada 1-888-331-3383 E-mail: support@motorolahome.com You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE Authorized Repair Center. To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase (receipt) which includes the date, place and seller of the Product; (c) if a Warranty card was included in your box, a completed Warranty card showing the serial number of the Product; (d) a written description of the problem; and, most importantly; (e) your address and telephone number. These terms and conditions constitute the complete warranty agreement between you and BINATONE regarding the Products or Accessories purchased by you, and supersede any prior agreement or representations, including representations made in any literature publications or promotional materials issued by BINATONE or representations made by any agent, employee or staff of BINATONE, that may have been made in connection with the said purchase.

: MBP845CONNECTBU, MBP845CONNECTPU, Declaration of Conformity Trade Name : Motorola Models Responsible party : Binatone North America Inc., Address IN 46032-6956, United States Telephone Number : 317-313-0581

: 11550 North Meridian Street, Suite 525, Carmel, . 48 General Information FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

H S I L G N E Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to Increase the separation between the equipment and receiver. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Privacy of communications may not be ensured when using this device. To ensure the safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product. This product has been tested and found to comply with the FCC criteria. The Baby Unit shall be installed and used such that parts of the users body other than the hands are maintained at a distance of approximately 8 inches (20 cm) or more. General Information 49 This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3(B)/NMB-3(B). WARNING Changes or modifications to this equipment not expressively approved by the party responsible for compliance could void the users authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. FCC/IC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Industry Canada This device complies with Industry Canada licence-exempt RSS standard(s):

Operation is subject to the following Two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The term "IC: " before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. IC Radiation Dclaration d'exposition Attention: Cet metteur doit tre install pour fournir une distance de sparation d'au moins 20 cm de toute personne. 50 General Information 10. Technical Specifications BABY UNIT Frequency Image sensor 2400 MHz to 2483.5 MHz color CMOS 1M Pixels IR LED Operating Temperature 5oC - 40oC Power Adapter 8 pcs H S I L G N E Ten Pao International Ltd. S005BNU0500100 (TenPao) Input 100-240V AC, 50/60Hz, 150mA;

Output: 5.0V DC, 1000mA YWK-AD050100-U (YWK) Input: 100-240V AC, 50/60Hz, 300mA;

Output: 5.0V DC, 1000mA BQ06A-0501000-U (Becky) Input: 100-240V AC, 50/60Hz, 300mA;

Output: 5.0V DC, 1000mA WARNING Use only with provided power supply. Technical Specifications 51 2400 MHz to 2483.5 MHz 5" diagonal TFT LCD Display Colors 16.7M color LCD Brightness Control 5 steps PARENT UNIT Frequency Display Volume Control Power Adapter 8 steps Ten Pao International Ltd. S005BNU0500100 (TenPao) Input 100-240V AC, 50/60Hz, 150mA;

Output: 5.0V DC, 1000mA YWK-AD050100-U (YWK) Input: 100-240V AC, 50/60Hz, 300mA;

Output: 5.0V DC, 1000mA BQ06A-0501000-U (Becky) Input: 100-240V AC, 50/60Hz, 300mA;

Output: 5.0V DC, 1000mA WARNING Use only with provided power supply. Battery (built-in) Lenovo BL253 3.8V, 2000mAh Lithium-Ion Polymer, rechargeable battery pack WARNING Do not attempt to replace the battery, but contact Customer Service if it needs replacing. Specifications are subject to change without prior notice. 52 Technical Specifications Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance. Internet Explorer and Windows are trademarks of the Microsoft group of companies. Firefox is a registered trademark of the Mozilla Foundation. Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated. Java is a registered trademark of Oracle and/or its affiliates. All other trademarks are the property of their respective owners. 2019 Motorola Mobility LLC. All rights reserved. US_EN Version 1.0 Printed in China

Part Name:

Product Label Set_NA Binatone Labeling File Part Name: Baby Unit Rating Label SSID Sticker c o d e Q R S N

4 3 3 3 1 9 J 0 0 0 0 0 1 M A D E I N C H N A I I C

F C C I D

V L J

L U X 6 4 B U 4 5 2 2 A

L U X 6 4 B U M O D E L

L U X 6 4 C O N N E C T B U 5 V 1 A Engraving Laser (41) QR code MODEL: LUX64CONNECTBU FCC ID: VLJ-LUX64BU IC: 4522A-LUX64BU MADE IN CHINA SN: 433319J000001 5V 1A Revision History:

V1 19-Sept-19 Initial release. V2 18-Oct-19 Changed to Label. QR code MODEL: LUX64CONNECTBU FCC ID: VLJ-LUX64BU IC: 4522A-LUX64BU MADE IN CHINA SN: 433319J000001 5V 1A Rating Label Material: White label with matt lamination. Size : 30 x 8 mm CAMERA-0064XXXXXX SSID Sticker Stick on Unit bottom 1) Colour: White background black letters. 2) Size: Fitted by factory. 433319D000001 Serial Number

- Model Number: 43331 = LUX64

- Produce date: 9J= October/2019

- Serial no. start from 000001 (6 digits)

- Code Format: code 128 1) Colour: White background black letters. 2) Size: 30 x 10mm (Gift box).

Part Name:

Product Label Set_NA Binatone Labeling File Part Name: Baby Unit Rating Label SSID Sticker c o d e Q R S N

4 3 3 3 1 9 J 0 0 0 0 0 1 M A D E I N C H N A I I C

F C C I D

V L J

L U X 6 4 B U 4 5 2 2 A

L U X 6 4 B U M O D E L

L U X 6 5 C O N N E C T B U 5 V 1 A Engraving Laser (41) QR code MODEL: LUX65CONNECTBU FCC ID: VLJ-LUX64BU IC: 4522A-LUX64BU MADE IN CHINA SN: 433419J000001 5V 1A Revision History:

V1 19-Sept-19 Initial release. V2 18-Oct-19 Changed to Label. QR code MODEL: LUX65CONNECTBU FCC ID: VLJ-LUX64BU IC: 4522A-LUX64BU MADE IN CHINA SN: 433419J000001 5V 1A Rating Label Material: White label with matt lamination. Size : 30 x 8 mm CAMERA-0065XXXXXX SSID Sticker Stick on Unit bottom 1) Colour: White background black letters. 2) Size: Fitted by factory. 433419D000001 Serial Number

- Model Number: 43341 = LUX65

- Produce date: 9J= October/2019

- Serial no. start from 000001 (6 digits)

- Code Format: code 128 1) Colour: White background black letters. 2) Size: 30 x 10mm (Gift box).

Authority to Act as Agent Date: 19 November 2019 TUV Rheinland Group 762 Park Avenue Youngsville, NC 27596 To Whom It May Concern:

I appoint TUV Rheinland (Shenzhen) Co., Ltd. and Mr. Ryan Yang to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with Binatone Electronics International Ltd. / Floor 23A, 9 Des Voeux Road West, Sheung Wan, Hong Kong For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date:

23 October 2020 Karl Heinz Mueller

(Print Name) CTO Telephone

+852 2803 7388 On behalf of

Binatone Electronics International Ltd.

(Company Name)

By Title QF094234 Page 1 of 1 Revision 0

Confidentiality Letter Date: 7 January. 2020 Subject: Confidentiality Request for FCC ID: VLJ-LUX64BU and IC ID: 4522A-LUX64BU Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Part List/Tune-Up Procedure Schematics Test Setup Photos Users Manual Binatone Electronics International Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. Sincerely,

(Signature/Title) Ryan Yang

(Print name) By:

Multiple Models Statement Letter Date: 2020-01-03 To whom it may concern, We, Binatone Electronics International Ltd., hereby confirm that the family models are listed in the following table. These models are identical as follows:

Electronics/electrical designs, including software & firmware Construction Design/Physical Design/Enclosure PCB Layout

(Others, please specify):

The only differences between these models are the follows for marketing purpose:

Model No. Color Trade Name / Trademark

(Others, please specify):

Suffix (

) represents (please specify):

All models are identical but different in the following model numbers only:

No. 01 02 03 04 05 06 New Model Model No. Trademark Remarks CONNECTVIEW65BU LUX64CONNECTBU LUX65CONNECTBU motorola motorola motorola Yes Yes Yes Yes Yes Yes No No No No No No The sample being submitted to TV Rheinland (Shenzhen) Co., Ltd. for conformity assessment is LUX65CONNECTBU (test model) of the above list. Regards, Signature Print Name / Title Karl Heinz Mueller / CTO T V-ICT V1.0