(SETTING DEVICE 1 Initial Boot Up The initial boot up step, the screen will be display when you install battery pack at the first time or when you press Esc , Enter , Power Key to do system cold boot. Don t remove battery pack when system is loading at initial boot up. 2 .Setting Up Wireless LAN RF After the initial boot up complete, TheSDCCF10G1 wireless LAN windows appear tab opens and asks you to configure wireless LAN RF settings. EMail fowl] x Main | Profile Status | Diags | Global IT Active Profile: [Default
[ThirdParty config Status: NE Radio Type:
Reg. Domain: Werldwide _ Auto Profle: Coon @)off [List Driver: v2.03.47 SC: v2.03.47 1). Select ThirdPartyConfig profile item from Summit client utility, Wireless LAN window will be enabled after initial boot up complete, select Disable Wireless LAN from [about scu_|
Wireless communication of control panel if you Pi] foes oa au 1 want disable it. 2). Tab on Wireless information from Microsoft Zero Configure utility. 3). Select the network you will access and tap the connect button or select Advance for more options. 4). If you want add a new network connection, double tap on Add New item from the list box.
| SDCCF10G1 [ox]
Wirelass Information f-
Select a network and press connect or right-click for more options. To add anew network, double-click add New", . 5). Press Ok to save all your wireless settings. i acoene A bita-mis |
Status: Not Connected Note: Signal Strength: No Signal
[ Notify when new networks available
[Connect |Advanced...|/ Log... 89) soccer... | oak ge 200 amlA Microsoft Zero Configure utility and Summit Client utility are for the models Wireless LAN feature settings. 3 -Brightness Setting This device is equipped with backlight for LCD display.To adjust the LCD backlight brightness, pressOrange Fnkey and navigation Key Upor PressOrange Fnand navigation key Down, to adjust display brightness. Or enter control panel to set brightness of LCD backlight. 1) Press Start Setting [REET fox
> Control Panel. Background | Appearance | Backlight |
: . Beige battery life bs 2) Double click Display Pe Sternstealy erring off the icon, select Backlight backlight when not needed. Y page then press Advancebutton. Turn off backlight when using:
[| Battery power, and device is idle:
for more than [a5 seconds +]
Ty) External power, and device is idle for more than > rrinates Le]
Advanced... foie] oa ty ass a A) [BY | oe || a] ts eS
[nn Beene &
Date/Time Adjust backlight level 4 .Date / Time Setting 1) To set date/time:When you first buy this device or when the device is initialized. 2) From Control panel application: Tap Start >
Setting Control Panel and execute 20 21 22 23-24 25 26 Date/Time. Be oe a 6 as 3) Adjust it to meet you demand and tap OK. TenasipM ES 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Time Zone
[(GMT-08:00) Pacific Tre (US & Calle Automatically aciust o by act LJ slack fre dawlinht Stina | Apply |
85) poate... ser 12103 em BA 5 .Calibrating Touch Screen This calibration is already done by manufacturer. If you want to calibrate the touch screen again, please tap Start > Setting Control Panel
> Stylus > Calibration or press F4 Key; And then, hold the Stylus Calibration or on the center of each target as it moves around the screen. -F Carefully press and briefly hold stylus on the center of the target. Repeat as the target moves arouind the screen Press the Esc key to cancel CAUTION:
Be sure to use the supplied stylus or plastic-tipped pens for touch screen display. Don't use pencil, pen Lon sharp object on touch screen display. USING THE APPLICATION 1 .Execute the " Application "
Tap an application icon on the desktop, or by Control Panel , or to tapstart > Programs Select one of the applications. __| Intemet Explorer . OO wears 2 .Close the "Application"
=. ea eed Tap the tab of x to close the application.
' esha Desktop Connection Close Button '
8) Sur 4 Transcriber - J
#7) |82 windows Explorer [File edit [| [> > |e x |
Start Button [address My Computer 3 -Using the Software Input Panel 1) Tap the stylus icon on the task bar. 2) Tap the keyboard item . 3) When Software Input Panel appears, input letters with the Stylus. Keyboard Input Panel 4 . Task Switch Win CE can execute more than 2 applications at the same time. 1) Press "Task Switch" icon in the task bar. 2) Select the task you want in the task menu. During the execution of applications, when you select the menu "Desktop", then it hides, instead of closing, all the other applications. BARCODE READING a [3] Welc... |e szs08 PM als Task Switch CAUTION:
Remove the protective film on Scanner window before using devices equipped with Scanner. 1 .Execute barcode application Tap Start > Setting > [ie view [Jc] [ee wew Py x I a mnt eS Control Panel and double & uy & a a click BC scanner Icon. Hae NNNEY BC Setting BC SCANNER 8C Setting Een foK]
Note: 0 0 oe BarCode Data ss BarCode Type Bluetooth Certificates This device is provided with | bec a built-in utility"BC scanner | -9 LL for barcode reader testing. | oatetme cain a @D Display Information Display Information i=
[2) |S com. | mg ae ml |@y |g sean_ | Sage a2 04 2 .Aim the scan window at the barcode Note:
Remember to take off the coat which is on the scan window and does influence the reading sensitivity. 3 .Press the scan key Note:
If the barcode scan failed, revise the reading angle or distance. 4 .Aim the laser beam at the center of the barcode 5 check the barcode reading result: failed or successful You can verify the result of barcode reading by beep sounds or the LED indicator. 6 Barcode Scanning Position >
This device can read from 4CM to 30 CM distance. Note:
1) When the barcode is small for lasers scan position to close the barcode number. When the barcode is the larger for lasers scan to location away from the barcode number. 2) The reader can be detected by a red beam. Te 7 Incorrect Barcode scanning position Scanning operations may fail if laser beam position as below. Mie Note:
This product scans using laser light. Never look directly into the laser light or shine the laser light into the eyes. USING PERIPHERALS 1 .Using Micro SD type Card 1) Remove the battery cover and take out the battery 2) Insert a correctly oriented Micro SD card. 3) Re-install the battery. 4) Replace and lock the battery cover 5) A Storage Card icon will appear under My Device folder on your desktop. 2 -USB Connection 1) Generally it s used for synchronized data transmission with a desktop. 2) Use the USB cable to connect with PC and this device and preinstall Microsoft ActiveSync program version 3.8 or later on the PC site. BATTERY PRODUCT SAFETY Lithium-ion battery packs might get hot, explode, ignite and/or cause serious injury if exploded by abusive using. Please follow the safety warnings listed as below:
Do not place the battery pack in fire or heat the battery. Do not install the battery pack backwards so the polarity is reserved. e Do not connect the positive Battery pack with negative battery pack to each other with any metal object (like wire). Do not carry or store battery pack together with metal objects. Do not pierce the battery pack with nails, strike the battery pack with a hammer, step on the battery pack or otherwise put it to strong impacts or shocks. Do not solder directly onto the battery pack. Do not expose battery pack to liquid, or allow the battery contacts to get wet. e Do not disassemble or modify the battery pack. The battery pack contains safety and protection devices, which, if damaged, may cause the battery pack to generate heat, explode or ignite. Do not discharge the battery pack using any device except for the specified device. When it is used in devices other than the specified devices, the battery pack can be damaged or its life expectancy reduced. If the device causes any abnormal current to flow, it may cause the battery pack to become hot, explode or ignite and cause serious injury. In the event the battery pack leaks and the fluid gets into one's eye, donot rub the eye. Rinse well with water and immediately seek medical care. If left untreated, the battery fluid could cause damage to the eye. CAUTION:
RISK OF EXPLOSIN IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. ) Mobile Computer Quick Guide User and Product Safety Fe z Do not stare into the laser beam directly or shine it into eyes. A\ WARNING:
Never use strong pressure onto the screen or subject it to severe impact, as the LCD panel could become cracked and possibility cause personal injury. If the LCD panel is broken, never touch the liquid inside, for such contact would irritate the skin. Although the Handy Terminal passed the test of IP54 standard for water and dust resistance, avoid prolonged exposure to rain or other concentrated moisture. For these conditions exceed the IP54 standard, and could result in water or other contaminants entering into the Handy Terminal. Use only the approved AC Adapter with the Handy Terminal. Use of an unapproved AC Adapter could result in electrical problems, or even cause a fire or electrical shock to the user. Be sure that only authorized supplier are allowed to disassemble and reassemble the device. If the device or parts have been damaged due to any wrong handling, shall void the product and parts warranty. Always make back-up copies of all important data. Itis easy done by using a cable or Single Cradle (sold by optional) to transfer data to the computer. Manufacturer is not liable for any data loss caused by deletion or corruption by using of this device, or due to the drained battery. P/N:4G57-BB000101