BlueIOT Card Bluetooth Location Tag BT1000-g USER MANUAL V1.0 Contents 1. Tag Introduction 1.1.General 1.2. Panel 2. Tag Usage 2.1. Turn on 2.2. Recharge 3. Basic function 3.1. Locating 3.2. SOS Alarm 3.3. Tag Conguration 3.4. Swipe Card 3.5. Data Privacy 4. Operation Conditions 5. Trouble Shooting 6. Safety Instructions 7. Disposal and Recycling Information 8. Limited Warranty 9. Statement on Intellectual Property Rights 10. Responsibility Statement 11. Product Parameters 1 1 1 2 2 2 4 4 5 5 5 5 6 8 8 15 16 18 19 21 1. Tag Introduction 1.1. General 2. Tag Usage 2.1. Turn on BT1000-g Card Bluetooth Location Tag (CBL Tag) is mainly used for First use of the tag, double-click the front panel button to boot. When locating people. With BlueIOT anchor, it is able to realize personnel turned on, the tag will vibrate and beep 4 times. locating, alarm, reminder and other functions. Its appearance is small and exquisite. It is simple and easy to carry and wear. 1.2. Panel Lanyard Hole Status Indicator Button Beep Hole When turned on, the tag will remain active, the user can not turn it off. If any need to close the tag, please contact the system administrator, realizing through the BlueIOT anchor and related software. Power on 2.2. Recharge When using the tag, note that the tag battery should have power. The LED indicator on the tag ashes every 5 seconds to indicate the current Charging Port battery level. The indicator light ashes in blue and green, indicating that the charging is normal;
The indicator turns to solid green, indicating that the battery is fully charged. work. The indicator turns red, indicating that the battery needs recharging as soon as possible. If the battery is completely exhausted before charging, it will take a while to get enough power to make the indicator light Follow the steps below to charge:
Please use the original power adapter and charging cable, checking if they are in good condition, clean and dry Insert the Type-C port of the charging cable into the charging port on the bottom panel of the label Insert the USB port of the charging cable into the power adapter When the tag stays static for a long time, it will automatically switch to Tag data will only be uploaded to the server designated by the user. Carry out re, boiling, owing steam, high heat steam, dry heat 5. Trouble Shooting follow all the indicated instructions and tips when you are in the petrol
(14F) to + 60C (140F) and the storage humidity range is 5-95. sleep mode. In sleep mode, the tag will enter a low power consumption When using tags, please consider and abide by local regulations related sterilization etc. on CBL Tags and accessories. The CBL Tag will ash the status light once every 5 seconds. If the station. Damage might be caused when it is used in an environment exceeding + 60C (140F). Place the CBL Tag under ultraviolet light. status light does not ash for a long time, please double-click the The CBL Tag is an integrated equipment. Neither the battery nor the status. The refresh interval for the tag to send locating signals to the to data privacy. anchor will be extended to 10 seconds; when the tag moves or vibrates, it will immediately get back to the normal mode from the sleep mode. The static time from normal mode to sleep mode is 15 seconds by 4. Operation Conditions Any other disinfection practices that may cause damage or safety issues. Use button Do not press the button on the CBL Tag hard or crack it default, and this value can be set on the server conguration software. Exposure to liquid The CBL Tag is not water resistant. Always avoid violently. WARNING: Using the wrong size or a poor-quality charger to Press the tag's alarm button and hold it for more than 3 seconds, the charge the tag may cause the tag battery to swell, heat up or even tag will upload the emergency alarm information. After the alarm takes catch re. Use the original charger to charge the tag!
effect, the LED indicator of the tag will ash orange, indicating that it is Dont clean CBL Tag while its charging. Please avoid leaving the battery of the device uncharged for a Dont dry CBL Tag using any external heat source (for example, a hair 3.2. SOS Alarm currently in the distress alarm status. 3.3. Tag Conguration exposing CBL Tag to liquids and moisture. Charging cable If the cable is bent repeatedly in the same area, it could Cleaning and care Keep CBL Tag clean and dry, but avoid damaging become hard and brittle. Please roll up the electric wire into downy CBL Tag. Observe the following:
curve. Please check the cables and connectors regularly to prevent them from knotting, breaking, bending or other damages. If any damage is found, do not continue to use the cable. Operating temperature CBL Tag is designed to work best in ambient temperatures between -10C (14F) and +60C (140F) and be stored in long time. 3. Basic function 3.1. Locating The tag can be congured on the service conguration software, and the Dont use cleaning products, ultrasonic cleaners, or compressed air instructions of are issued to the tag through the BlueIOT anchor. For when cleaning your CBL Tag. temperatures between -20C (-4F) and +70C (158F). CBL Tag can be 6. Safety Instructions damaged and battery life could be shortened if stored or operated specic conguration functions, please refer to the "Service Conguration Software Manual"
Disinfection The following situations should be strictly avoided when outside of these temperature ranges. Avoid exposing CBL Tag to disinfecting parts such as areas around the button and charging dramatic changes in temperature or humidity. After the tag is turned on, it automatically enters the normal mode of 3.4. Swipe Card locating. In the normal mode, the tag sends a locating signal to the BlueIOT anchor at a certain refresh interval. The refresh interval defaults to 200 milliseconds. This value can be set on the service conguration software. 3.5. Data Privacy The tag has a built-in RFID coil, which can be used for radio frequency Spray or wipe the CBL Tag directly with disinfectant liquid (such as identication through a card reader. diethyl ether alcohol, chlorine-containing disinfectant, peracetic acid button. If the status light of CBL Tag is still off, the battery power of back cover can be removed. Removing the back cover of the CBL Tag The CBL Tag and the accessories comply with applicable surface your CBL Tag has been used up, or the CBL Tag is out of order. Please may damage the battery and lead to material leakage that may cause temperature standards and limits. However, even within these limits, contact your system administrator in time. allergic reactions. Bluetooth wireless may penetrate some objects to establish This equipment and its accessories may contain some small parts. connection, such as wooden box, shelf, hollow wall, etc. However, it Please keep the equipment and its accessories including the small may cause an increase in location error. parts out of reach of children. Children may inadvertently damage the sustained contact with warm surfaces for long periods of time may cause discomfort or injury. Continuous alert of the CBL Tag may make the equipment feel warm. Remove the CBL Tag if it becomes uncomfortably warm. If the CBL Tag you are wearing is squeezed hard or entered with liquid, resulting in the short circuit of the vibration motor. Please contact the equipment and its accessories, or swallow small parts that cause Please use the charger in the original package when charging. Usage suffocation or other dangers. of non-conforming third-party chargers may cause personal safety manager in time in this case. Do not store or transport equipment and its accessories in the same damage and/or battery damage. box with ammable gases, liquids or explosives. Battery When disinfecting the equipment, do not spray or wipe it directly with Never discard, replace or open the battery at will, nor try to penetrate ammable liquid to avoid re. the equipment with sharp tools, as the electrolyte inside the battery in Failure to follow these safety instructions could result in electric shock, re, injury, or damage to CBL Tag or other properties. Read carefully all the information about safety below before using the CBL Tag. The seller Never disinfect the equipment during the charging process to avoid equipment damage or casualties. shall not be liable for any damages caused by misuse or violation against Keep the CBL Tag in a dust-free place when not using it, and do not the equipment may damage skin and clothes. The equipment should be stopped from using if it is noticed to be hot, smelly, discolored, deformed or in any other abnormal status. the instructions contained herein. Safety not use CBL Tags when you are close to gasoline or liquid. Strictly leave it in an abandoned status. Please pay attention to the weather If the battery leaks, do not expose the leaked liquid to your skin or and environmental conditions (nature, dust, rain seeping, wet, rain, sea eyes. If exposed to skin or eyes, rinse immediately with clear water and water etc.). The recommended operating temperature range is -10C take medical treatment at the hospital. dryer). interfaces:
etc.). 1 2 3 4 5 6 7 8 9 10 Do not expose the batteries to high temperature or place it close to with hot surfaces even within the indicated limits as this may lead to certain distance. any heating equipment, such as sunshine, heater, microwave oven, discomfort or injury. After the power supply is plugged in, the CBL Tag, oven and water heater etc. Overheating batteries may cause explosion. the CBL Tag charging cable and the power adapter will gradually heat Do not drill or incinerate the equipment or battery. Please consult the up, but will not break the indicated limits. Medical equipment interference CBL Tag contains components and radios that emit electromagnetic elds. CBL Tag has certain coverage of radio frequency bands. These electromagnetic elds may interfere with local waste treatment department in accordance with the applicable Avoid wearing a CBL Tag when charging, or allowing your skin to medical equipments, such as pacemakers and debrillators etc. Consult environmental factors, extended exposure to irritants or other causes. If you have past experiences from skin sensitivities, please take special care when wearing CBL Tag. You might be more likely to experience irritations. Keeping CBL Tag clean and dry could reduce the possibility of skin irritations. local regulations including laws and policies when disposing your contact the CBL Tag, CBL Tag charging cable or power adapter during your physician and medical equipment distributor for specic Equipment safety The CBL Tag contains high-sensitivity electronic equipment/battery. Batteries must be recycled or disposed of long time while charging. For example, when the CBL Tag is charging, information related to your medical equipment and conrm whether components. Falling, burning, puncturing or rolling could cause separately from household waste. or when the CBL Tag charging cable, or the power adapter is powered you need to maintain a safe distance between the medical equipment equipment damage. on, do not lie on it or place it under a blanket or pillow etc. Please be and the CBL Tag and the CBL Tag charging cable. Should you have any especially careful if your body has conditions that affect your ability to suspects or doubts, you are recommended not to use this product sense heat. If the temperature of the CBL Tag makes you
(including all parts and all accessories). Bluetooth equipment Bluetooth equipment may be prohibited on the aircraft. The use of Bluetooth equipment has to be compliant with the relevant regulations from the national radio management authorities Charging Please charge the battery in accordance with the requirements of the instructions. Please use the provided (in the same product package) CBL Tag charging cable and power adapter. When charging, remember to place the CBL Tag, CBL Tag charging cable and power uncomfortable, please remove it. Maintenance adapter in a well-ventilated environment. Using a damaged CBL Tag Do not open the CBL Tag and try to repair it yourself. Disassembling the charging cable or charging when humidity is high may cause re, CBL Tag may cause damage injury. If the CBL Tag is damaged or out of electric shock, injury or damage to the CBL Tag and other properties. normal status, please contact your seller in time. Always keep the ports of CBL Tag and power adapter clean. Warning Without adults monitoring, do not let children charge the CBL Tag. Radio frequency interference Observe signs and notices that prohibit or As long as the applicable surface temperature standards and limits are met, CBL Tags, CBL Tag charging cables, and power adapters will function normally. However, please still try to avoid continuous contact restrict the use of electronic equipment. Although CBL Tag is designed, tested, and manufactured to comply with regulations governing radio frequency emissions. Emissions from CBL Tag could potentially negatively affect the operation of other electronic equipment within Explosive and other atmospheric conditions Charging or using CBL Tag and relevant aviation management department. in any environment with explosive risk is strictly prohibited. CBL Tag functionalities might be damaged or impaired when exposed to environment with high concentrations of industrial chemicals. Obey all relevant signs, instructions and restrictions. Not a medical equipment The CBL Tag is NOT designed as a medical equipment and should not be used as a replacement for professional medical assessment or judgement. It is not intended for use in the diagnosis of disease or other medical conditions, or in the cure, Choking hazard Some CBL Tag accessories may present a choking mitigation, treatment, or prevention of any medical / health conditions hazard to babies or children. Keep them out of reach of babies and or disease. Please consult your healthcare provider all questions related small children. to your health before considering use the CBL Tag. Skin sensitivities Some people may experience allergies or reactions when their skin is touched by certain materials used in jewelry, watches or any other wearable items. This can be caused from allergies, 5. Trouble Shooting follow all the indicated instructions and tips when you are in the petrol
(14F) to + 60C (140F) and the storage humidity range is 5-95. The CBL Tag will ash the status light once every 5 seconds. If the station. status light does not ash for a long time, please double-click the The CBL Tag is an integrated equipment. Neither the battery nor the Damage might be caused when it is used in an environment exceeding + 60C (140F). button. If the status light of CBL Tag is still off, the battery power of back cover can be removed. Removing the back cover of the CBL Tag The CBL Tag and the accessories comply with applicable surface your CBL Tag has been used up, or the CBL Tag is out of order. Please may damage the battery and lead to material leakage that may cause temperature standards and limits. However, even within these limits, contact your system administrator in time. allergic reactions. Bluetooth wireless may penetrate some objects to establish This equipment and its accessories may contain some small parts. connection, such as wooden box, shelf, hollow wall, etc. However, it Please keep the equipment and its accessories including the small may cause an increase in location error. parts out of reach of children. Children may inadvertently damage the sustained contact with warm surfaces for long periods of time may cause discomfort or injury. Continuous alert of the CBL Tag may make the equipment feel warm. Remove the CBL Tag if it becomes uncomfortably warm. If the CBL Tag you are wearing is squeezed hard or entered with liquid, resulting in the short circuit of the vibration motor. Please contact the equipment and its accessories, or swallow small parts that cause Please use the charger in the original package when charging. Usage suffocation or other dangers. of non-conforming third-party chargers may cause personal safety manager in time in this case. Do not store or transport equipment and its accessories in the same damage and/or battery damage. 6. Safety Instructions Failure to follow these safety instructions could result in electric shock, re, injury, or damage to CBL Tag or other properties. Read carefully all the information about safety below before using the CBL Tag. The seller the instructions contained herein. Safety not use CBL Tags when you are close to gasoline or liquid. Strictly box with ammable gases, liquids or explosives. Battery When disinfecting the equipment, do not spray or wipe it directly with Never discard, replace or open the battery at will, nor try to penetrate ammable liquid to avoid re. the equipment with sharp tools, as the electrolyte inside the battery in Never disinfect the equipment during the charging process to avoid equipment damage or casualties. the equipment may damage skin and clothes. The equipment should be stopped from using if it is noticed to be hot, smelly, discolored, deformed or in any other abnormal status. leave it in an abandoned status. Please pay attention to the weather If the battery leaks, do not expose the leaked liquid to your skin or and environmental conditions (nature, dust, rain seeping, wet, rain, sea eyes. If exposed to skin or eyes, rinse immediately with clear water and water etc.). The recommended operating temperature range is -10C take medical treatment at the hospital. shall not be liable for any damages caused by misuse or violation against Keep the CBL Tag in a dust-free place when not using it, and do not Do not expose the batteries to high temperature or place it close to with hot surfaces even within the indicated limits as this may lead to certain distance. environmental factors, extended exposure to irritants or other causes. If 7. Disposal and Recycling Information breach of the warranty terms. Please consult your local seller 's 9. Statement on Intellectual Property Rights company are management aids, which cannot replace the safety allowed by laws, and there may exist defects, errors or faults. The For more information , please contact info@blue-iot.com. any heating equipment, such as sunshine, heater, microwave oven, discomfort or injury. After the power supply is plugged in, the CBL Tag, oven and water heater etc. Overheating batteries may cause explosion. the CBL Tag charging cable and the power adapter will gradually heat Do not drill or incinerate the equipment or battery. Please consult the up, but will not break the indicated limits. Medical equipment interference CBL Tag contains components and radios that emit electromagnetic elds. CBL Tag has certain coverage of radio frequency bands. These electromagnetic elds may interfere with local waste treatment department in accordance with the applicable Avoid wearing a CBL Tag when charging, or allowing your skin to medical equipments, such as pacemakers and debrillators etc. Consult you have past experiences from skin sensitivities, please take special care when wearing CBL Tag. You might be more likely to experience irritations. Keeping CBL Tag clean and dry could reduce the possibility of skin irritations. local regulations including laws and policies when disposing your contact the CBL Tag, CBL Tag charging cable or power adapter during your physician and medical equipment distributor for specic Equipment safety The CBL Tag contains high-sensitivity electronic equipment/battery. Batteries must be recycled or disposed of long time while charging. For example, when the CBL Tag is charging, information related to your medical equipment and conrm whether components. Falling, burning, puncturing or rolling could cause separately from household waste. or when the CBL Tag charging cable, or the power adapter is powered you need to maintain a safe distance between the medical equipment equipment damage. CBL Tag disposal and recycling of your CBL Tag in accordance with local environmental laws and guidelines. on, do not lie on it or place it under a blanket or pillow etc. Please be and the CBL Tag and the CBL Tag charging cable. Should you have any especially careful if your body has conditions that affect your ability to suspects or doubts, you are recommended not to use this product sense heat. If the temperature of the CBL Tag makes you
(including all parts and all accessories). Bluetooth equipment Bluetooth equipment may be prohibited on the aircraft. The use of Bluetooth equipment has to be compliant with the relevant regulations from the national radio management authorities Charging Please charge the battery in accordance with the requirements of the instructions. Please use the provided (in the same product package) CBL Tag charging cable and power adapter. When charging, remember to place the CBL Tag, CBL Tag charging cable and power uncomfortable, please remove it. Maintenance adapter in a well-ventilated environment. Using a damaged CBL Tag Do not open the CBL Tag and try to repair it yourself. Disassembling the charging cable or charging when humidity is high may cause re, CBL Tag may cause damage injury. If the CBL Tag is damaged or out of electric shock, injury or damage to the CBL Tag and other properties. normal status, please contact your seller in time. Always keep the ports of CBL Tag and power adapter clean. Warning Without adults monitoring, do not let children charge the CBL Tag. Radio frequency interference Observe signs and notices that prohibit or As long as the applicable surface temperature standards and limits are met, CBL Tags, CBL Tag charging cables, and power adapters will function normally. However, please still try to avoid continuous contact restrict the use of electronic equipment. Although CBL Tag is designed, tested, and manufactured to comply with regulations governing radio frequency emissions. Emissions from CBL Tag could potentially negatively affect the operation of other electronic equipment within Explosive and other atmospheric conditions Charging or using CBL Tag and relevant aviation management department. in any environment with explosive risk is strictly prohibited. CBL Tag functionalities might be damaged or impaired when exposed to environment with high concentrations of industrial chemicals. Obey all relevant signs, instructions and restrictions. Not a medical equipment The CBL Tag is NOT designed as a medical equipment and should not be used as a replacement for professional medical assessment or judgement. It is not intended for use in the diagnosis of disease or other medical conditions, or in the cure, Choking hazard Some CBL Tag accessories may present a choking mitigation, treatment, or prevention of any medical / health conditions hazard to babies or children. Keep them out of reach of babies and or disease. Please consult your healthcare provider all questions related small children. to your health before considering use the CBL Tag. European UnionDisposal Information The symbol above means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product and/or its battery at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. Skin sensitivities Some people may experience allergies or reactions when their skin is touched by certain materials used in jewelry, watches or any other wearable items. This can be caused from allergies, 8. Limited Warranty Warranty information to defects materials or manufacturing processes. Damage caused by accident, abuse, misuse, inow, ooding, re or external factors. personnel. Damage caused from repairing by non-BlueIOT authorized warranty Damage caused by modication or alteration of the product without the seller 's written consent. In addition, the seller reserves the right to refuse the warranty application for products or services obtained and/or used in violation of the laws of any country. This warranty provides you with specic legal rights, but this right may vary from region to region. The seller will not be responsible for any accidental, special, indirect or derivative damage (which may result from use, misuse, don't know how to use or product defects). The seller reserves the right to overhaul or replace
(new products or newly overhauled replacement products) equipment or software. This is the sole and exclusive remedy for any authorized seller when applying for warranty service. Warranty card Copyright Statement reserved. Accessories (e.g. adapter, charging cable) No warranty
*Non-human factors, one-year warranty period; the cost of logistics
(shipment) shall be borne by the users. Note: If your device is purchased through a local seller, please contact the local seller for the warranty service acquisition method. If your device Any part of this manual, including text, pictures, graphics, etc., belongs to BlueIOT (Beijing) Technology Co., Ltd. Without written permission, any unit or individual may not extract, copy, translate, or modify this manual in whole or in part by any means. Unless otherwise agreed, the Company makes no representations or warranties of any kind, express or implied, with respect to this manual. Trademark statement was purchased directly by the manufacturer, please get in touch via:
"BlueIOT" trademarks, logos, and trademark combinations are registered info@blue-iot.com. trademarks of BlueIOT (Beijing) Technology Co., Ltd. Disclaimer: Depending on the design of usage location / environment Liability statement and the way how it is used, there could be false positives due to tissue, walls, structures or other factors and false negatives due to bodily interference, electromagnetic interference, or other factors. BlueIOT warranties that the CBL Tag performs to the requirements listed on the CBL Tag spec sheet. All sales are nal. To the maximum extent allowed by law, the products (including hardware, software, etc.) described in this manual are provided "as is", there may be defects, errors or malfunctions, the company does not provide any form of express or implied warranty, The "BlueIOT" series of products (hereinafter referred to as "equipment") provided by our management system, measures and rescue programs of dangerous Company does not provide express or implied guarantee in any form, operations, nor can they replace the supervision system in operation or compensate for any special, incidental, accidental or indirect management and measures. damages caused by using the Manual or products of the Company. 11. Product Parameters During the use of this product, please remind the operator not to The Company does not undertake any responsibility for any damage BT1000-g Card Bluetooth Location Tag reduce safety awareness due to the use of auxiliary tools, timely charge to personal or property interests of one's own or third party caused by the device when the device is low, and regularly check the device. If you failing to use the product according to the Manual and warning have any questions, please contact our company for repair or statement. replacement. 10. Responsibility Statement Disclaimer The product is an auxiliary tool, which cannot replace any safety management system, measure and rescue solution for hazardous The Company does not undertake any responsibility for any product operation abnormality, information disclosure or other problems caused by network attack, hacker virus infection or other unknown risks due to Internet access during product use. The product promoting pictures and advertisements are used only for instruction and promotion. Physical products prevail in all cases. operation or supervision system and measure for operation The data in the Manual are all theoretical values obtained by the management. Please do not reduce safety awareness while using the internal lab of BlueIOT in specic testing environments. However, there product, and timely charge the product and check its operation state may exist differences due to individual product differences, software when the power is low. version, using conditions and different environmental factors, and Measurement data and results of this product are for reference only. actual using conditions shall prevail in all cases. Frequency Range 2.4GHz ~ 2.485GHz Positioning Precision Average LOS precision up to 10cm Refresh Rate 5Hz by default Status Indication LED / vibration / buzzer Size Weight 85mm54mm6mm 30g excluding accessories Power Endurance 3 months on average (@5Hz) Battery Capacity 480mAh/Rechargeable lithium battery Charging Interface USB Type-C Charging Voltage 50.1V, 1000mA Charging Time Operating Temperature Storage Temperature 4 ~ 6 Hours
-10 ~ 60C
-20 ~ 70C Products described in the Manual (including hardware and software) The Company will not send special notice in the case of being Operating Humidity 10% ~ 90% Non-condensing are all provided in the "current situation" within the maximum range necessary to modify and adjust the above. Storage Humidity 5% ~ 95% Non-condensing This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment The devices has been evaluated to meet general RF exposure requirement the device can be used in portable exposure condition without restriction Your CBL Tag should not be disposed of with household waste. Dispose Warranty does not apply to:
Copyright 2020 BlueIOT (Beijing) Technology Co., Ltd. All rights Surface damage, such as scratches, dents and depressions. Product name (including spare parts) Limited warranty period Consumables such as batteries, except if the product is damaged due CBL Tag (as entire product) 1 year 11 12 13 14 15 16 17 18 19 20 21