BOOMPODS music . anywhere . everywhere HELLO!
EN TECH Model: doubleblaster 2 User Manual Please read me carefully before using your doubleblaster speaker for the first time. Name:
USE:
Speakers:
Protection rating:
battery:
Charge: time Standby time:
Working time:
Bluetooth:
Bluetooth range:
microphone sensitivity:
Standby current:
Working current:
Charging current:
Working frequency:
distortion:
doubleblaster2 Loud and clear sound and powerful bass. 52 4 7W (max) 100-18000Hz + Passive bass IPX6 splashproof 3.7V 2200mAH lithium 3Hrs 2000Hrs 8Hrs (70% volume) 4.1 (TWS dual pairing) 10M (open space)
-42(+-)3dB;omni-directional; S.N.R 60dB 200A 100mA (minimum volume) DC 5V 0.8 A (red LED lights) 2.4-2. 480 GHZ 3%
Volume down (1 tap), previous track (press hold) Volume up (1 tap), skip track (press hold) to activate Shhhhh mode Hold + > -
Connecting with audio cable:
Connect 3.5 audio jack to your music source & the micro connection to the side of your speaker by opening the micro-USB cover please note your speaker is not waterproof with the door open. BOOMPODS BOOMPODS BOOMPODS LED
*WARNING after charging make sure rubber cover is firmly closed to allow no water or debris to enter. Failure to do this will void your Warranty. On/off, pairing mode
(PRESS) Play, pause, take calls, and drop calls CONNECT Connecting to Bluetooth:
Press and Hold ON/OFF button until you hear bi-bing sound which will then be followed by the pulsing searching sound. Now find the words DB2 in your Bluetooth device menu, select this & wait until the pulsing sound has stopped and another de-dum sound. You are now connected & ready to play music & receive calls. To switch off; press & hold the ON/OFF button until you hear the de-dum sound. If you lose power on your Bluetooth device or move out of range your DB2 will make the de-dum sound. You will need to move closer to your speaker and it will reconnect, if this doesnt happen you can either switch OFF & ON to reconnect your speaker or double press the ON/OFF button to activate pairing mode and reconnect. CHARGE Charging:
Open the micro USB cover , connect supplied cable micro USB end to micro input socket, then connect USB to USB charging point. Once fully charged red light will go out. If you want to play music whilst charging, connect to your device first and then start charging. General guidelines:
Keep away from high temperature or prolonged exposure to direct sunlight. Avoid constant contact with liquids. Do not disassemble. Do not drop repeatedly or excessively. Keep out of reach of children. Warranty:
Your BOOMPODS product is guaranteed against any defects in material or workmanship for one full year from the date of original purchase providing it has not been disassembled and it has not suffered accidental damage such as a hard knocks or long immersion in water, etc. The device must be used in accordance with the user manual. The warranty is subject to presentation of the original invoice or receipt from the retailer and does not apply to normal wear and tear or to any device that has been misused or tampered with. It should be returned to the local service centre, the service centre will not bear any shipping cost of the returned item. Please check www.boompods.com for your local service centre. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generatesuses and can radiate radio frequency energy and, if not installed and used in accordance withthe instructions, may cause harmful interference to radio communications. However, there isno guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected. Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions:
(1) This device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment. TURN UP THE BOOM!
BOOMPODS is a trademark of BOOMPODS LTD., Registered in England No 08147066. Boompods Ltd Unit 34, 67-68 Hatton Garden, London EC1N 8JY United Kingdom BOOMPODS 2017 All Rights. This product uses BOOMPODS technology and is covered by international patents, Made in China. BOOMPODS