XD6 MANUAL 1
/Contents 1/Description: 2 2/Input characteristic: 2 3/Output characteristic: 2 4/Wireless charging: 3 5/Product size: 4 6/Product & security information: 5 7FCC Statement 8 2 1/Description:
MP3MP4GPRS 5V0.9A This product is suitable for wireless charging for mobile phones, MP3, MP4, digital products, communications, GPRS, automobile, furniture, fire-fighting, waterproof, etc. And power other 5V 0.9A battery or product. IC/wireless power controllerIDT P9235 2/Input characteristic:
Parameter INPUT CHARACTERISTICS Input voltage range
() Maximum incoming current (adapter) Static Current Wireless Charging Distance Notes and Conditions Min Typ Max Unit IOUT =0- 1A VIN = Nom, IOUT =0- 1A VIN = Nom, NO receiver 4.7 5 5.25 0.1 1.5 1.6 2 80 100 V A mA 2-5mm 3/Output characteristic:
Parameter OUTPUT CHARACTERISTICS Output voltage rangewireless receiver)
() Maximum output current wireless receiver) Notes and Conditions Min Typ Max Unit VIN = Nom 4.95 5.0 5.05 VIN = Nom 0.9 V A 3 4/Wireless charging:
1 2 3 micro USB Switch On 1 Connect one end of the charger cable to the power supply;
2 Put the power supply unit to AC power outlet;
3 Connect the other end of cablemicro USBto charging mat You can keep the charging mat plug into outlet when not charging your mobile phones, and it hardly consume any power.
/Switch Off Pull out cable from power supply unit and disconnect power supply unit from charging mat. 1 2
(
) Charging the device 1 Make sure that there is nothing on the charging mat. 2 Put your mobile phone or other compatible device on charging mat, until it is fully charged. Its normal for charging mat and mobile phone to get hot. And they may get even hot if you use your phone when charging. 4 5/Product size(mm):
5 6/Product & security information:
Qi 6 Take care of your device: handle your device,charger and accessories carefully. The following suggestions will help you use warranty service efficiently. Keep the device dry. Rain water, humidity and all kinds of liquids or water may contain minerals that corrode electronic circuits. If got wet, please make it dry. Please adopt certificated adapter. Use incompatible adapter may cause fire, explosion or other dangers. Dont use damaged adapter, indoor use only. Do not attempt to charge the device which having a damaged, cracked or open battery case, or a device that is not compatible with Qi. Do not use or store the device in dusty and dirty places. It may damage its removable parts and components. wrap and melt. Do not store it in high temperature environment, which will shorten its life and make the plastics Do not store it in cold environment. Moisture can form inside and damage electronic circuits when putting it in normal temperature. Do not attempt to open the device. Unauthorized modifications may damage the device and violate related regulations of wireless Do not cast, knock or shake the device. Rough handling can break its internal circuit boards and communications. mechanics. Only use a soft, clean, dry cloth to clean the surface of the device. 7 7 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 8