FTechnical Information Bluetooth specification Supportive Bluetooth protocol Supportive music file format USB Port Supportive USB flash capacity FM reception frequency range FM stored channels Power supply Speaker output power Display screen Operating environmental temperature Bluetooth v2.1+EDR AVCTP1.0AVRCP1.0 GAVDP1.2AVDTP1.0 A2DP1.2Hands-Free profile1.5 Headset profile v1.1 MP3/WMA Support USB 2.0 128MB ~ 32G 87.5 ~ 108MHz 20 Battery4 x 1.5V AA batteries Adapter TypeSwitching Adapter Input VoltageAC 100-240V 50/60Hz Output voltageCurrentDC 5V 800mA DC 5V output plugmicro-USB 500mW LCD
-5 to 40 C 3 Item no. 0509 Battery Operated Or Micro-USB Power Supported GTrouble Shooting The product is controlled by MCU, if there is any function trouble (such as the buttons are invalid, abnormal function and LCD screen holds still), please turn off the power, wait for about one minute and turn on the power again. If the player resumes working at the moment, it can be used again normally. SYMPTOM NO POWER CHECK AND ACTION 1. Check if the adapter has been properly connected to the player and the indoor No sound of the speaker Bad reception of FM radio No sound of Line In input Can not play music in USB flash drive power socket. 2. Check whether the battery is installed correctly. 3. Replace the battery which is exhausted. 4. Make sure the power switch has been switched to "ON"
1Check if the volume is rotated to the minimum, and adjust volume higher 1. Adjust position of the player 2. Turn off nearby electrical equipment. 5. Check if the Line Cable is damaged or connected correctly 6. Check if the external equipment works normally. 7. Check if the product has entered Line In run mode. 8. Check if the volume is rotated to the minimum, and adjust volume higher 1. Check if USB flash drive has been inserted into the player correctly 2. Check if there are any music files of MP3/WMA format in USB flash drive; for no MP3/WMA file inside USB flash drive, it will indicate no FILE on LCD screen 3. Check if the music files in USB flash drive are damaged. 4. Check is USB flash drive is damaged. Note: When battery power is weak, some USB flash drives inserted into the player may not work properly. Please replace with new battery or connect to external (DC.5V) power supply in time. 7 IMPORTANT MESSAGES:
Thank you for buying this Bluetooth Dual Microphones Karaoke, Please take a moment to read these instructions of how to operate this product safely and properly. Please keep this packaging since it contains important information. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of FCC RF Rules. CAUTION:
To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device is comply with Class B limits. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may results in interference to radio or reception. MODIFICATION:
Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the device. A. Important Notes 1. Do not repair, alter or disassemble the unit arbitrarily. 2. Do not drop it in water or drop water on it. 3. Do not put the unit outdoors, in the washroom, bathroom or other places that may get it wet. 4. Do not put the unit on the unstable shelf, sloping surface or other places that may cause the falls of the unit. 5. Do not insert small objects into the unit. 6. Please follow the instruction of airlines when use it in an aircraft. 7. Do not hit or strike the unit by hard objects. 8. Do not use and keep the unit in the dusty, oily, smoky and humid places. 9. Do not touch and plug DC Adapter by wet hands in case of electric shock. 10. Do not use chemicals (like alcohol, benzene thinner) to clean the unit. B. Appearance and Function Introduction Press each time to select mode in circular sequence: Bluetooth USB FM Line-in function; The Default mode is Bluetooth 10LCD Display 11Power Switch : Turn on or turn off power supply 12MIC VOL : Rotate to adjust microphone volume 13USB PortFor inserting external USB flash drive 14Line-inExternal audio signal (audio source of other devices) input 15DC 5V Input External power input via micro-USB cable (d.c. 5V 800mA) 16Built-in Speaker CUnpacking 1Main Unit 2Line-in connecting cable 3Micro-USB cable(Optional) 1 3 5 MIC ON/OFF MIC ON/OFF 10 2 4 9 8 7 6 16 Main Unit (the player) Line-in cable Micro-USB cable(Optional) MIC. VOL. 11 12 13 14 15 DPower Supply 1Battery installation
* Unscrew and remove the battery cover of the unit.
* Insert 4 x AA alkaline batteries with the correct polarity.
* Replace the battery cover and tighten screws 1Microphone (Left) 2Microphone (Right) 3MIC ON/OFF Button Press to turn on or turn off the left microphone 4MIC ON/OFF Button : Press to turn on or turn off the right microphone 5Volume Up/Down (+/-)Digital Volume Control 6PREV/SKIP-
a) In USB or Bluetooth mode, press to choose previous music b) In FM mode, press to choose previous channel 7NEXT/SKIP+
a) In USB or Bluetooth mode, press this button to choose next music b) In FM mode, press this button to choose next channel 8PLAY/PAUSE/RADIO SCAN/M+/Bluetooth a).In USB or Bluetooth mode, press to play or pause the music b).In FM mode, press more than 3 seconds to enter FM auto-scan and save channels automatically;
during auto-scan process, press to stop scan, and press again to choose the saved channel c).In bluetooth mode, long press to erase paired information. 9Mode Switch MIC. VOL. Important safety instructions
*Replacement of batteries must be done by an adult.
*Batteries are to be inserted with the correct polarity.
*Only batteries of the same or equivalent type as recommended are to be used.
*Do not use rechargeable batteries.
*Do not mix alkaline standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
*Do not mix old and new batteries.
*Exhausted batteries are to be removed from the toy.
*Non-rechargeable batteries are not to be recharged.
*The supply terminals are not to be short-circuited.
*Rechargeable batteries are to be removed from the toy before being charged
*Rechargeable batteries are only to be charged under adult supervision 1 2 2Use of Adapter (adapter is not included) 1. Ensure that the local voltage corresponds to the adapter voltage. 2. Plug DC 5V output of micro-USB cable to the player, and another terminal connects to indoor power socket. MIC. VOL. Notes:
*if the product is not used for a long time (30 days or more), please press the power switch to OFF, and take out batteries in case the leakage of batteries damage the products.
*When batteries are exhausted, the product will stop working automatically. Please take out the batteries in time in case the leakage of batteries damage the products.
*The product can be powered by the USB cable connected to computer. 3 Specification of Adapter 1). Adapter type: Power Switch 2). Input Voltage: AC 100-240V 50/60Hz 3). 0utput Voltage: DC 5V; Output Current: 800mA 4). Output DC plug: select the micro-USB plug that matches DC Input of the player 4 Battery symbol indicates on LCD Display when using batteries as power supply Battery symbol will disappear when using DC 5V input as power supply, if the DC 5V input is discontinued, it will switch back to power supply of batteries CAUTION:
When using optional AC adapter, it must comply with the specifications of CEE publication 15. Charging unit to be used with toy should be regularly examined for potential hazard as damage to the cable or cord, plug, enclosure of other parts and that, in the event of such damage, the toy must not be used. Transformers used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and that, in the event of such damage, the toy must not be used with this transformer until the damage has been repaired. 1). Warning! Not suitable for children under 36 months. Electric shock hazard. 2). The toy shall only be used with a transformer for toys. 3). The transformer is not a toy;
3 4).Toys liable to be cleaned with liquid are to be disconnected from the transformer before cleaning. 5).The toy is not to be connected to more than the recommended number of power supplies. EBasic Function Power on aInstall batteries correctly or connect the player with DC 5V adapter bSlide the power switch to ON cThe player is designed with power-saving feature. In Bluetooth, USB or Line-in mode, if no operation within 30 minutes after stopped music, the indicated word OFF will show on LCD display and flash slowly for 3 seconds then shut down the power of player automatically. After that, press any button will not activate the player. and have to slide power switch from OFF to ON again to turn on the player.
[ Note: no power-saving feature in FM mode ]
1Bluetooth Function aAfter power on, the player goes to Bluetooth mode automatically bWhen hearing beep-beep from the player, the Bluetooth is waiting pairing, and the wordbt indicates on LCD and flash (as showing in picture E-1-a) c Enter the Bluetooth interface of mobile phone or other device, choose search for device or Search for audio d When Pairing code SC-56M shows on searching list on display of mobile phone or other device, please select the SC-56M for pairing e If password is needed, please input 0000 and then press ok. f When pairing is successful, you will hear a beep from the player, and the word bt stops flash and stays on LCD of player. g Press to play music, and press again to pause music. Press to choose next music or press to choose the previous music hThe effective distance between the player and Bluetooth device is around 10 meters; When Bluetooth device moves out of 10 meters, the Bluetooth connection will be discontinued and can be restored if Bluetooth device moves back within 10 meters (under Auto-connect status, the words
-bt- shows on LCD and flash, as showing in picture E-1-b) iWhen turn off the player and turn on again, the player will automatically search and connect to the last Bluetooth device which was successfully connected, and LCD display as showing in picture E-1-b jTo erase current Bluetooth pairing information, press and hold button, then the word bt indicates on LCD and flash (as showing in picture E-1-a)
(E-1-a E-1-b 4 2MP3 (USB) Function a After power on, insert USB flash drive to USB port of the player, and press Mode Switch to select USB function, the word USB firstly indicates on the LCD player and then the total number of songs included in USB flash drive will indicate on the LCD player as showing in picture E-2-a. bPress to play the music and the playing time of running music indicates on LCD display, as showing in picture E-2-b. cPress to pause music, and the playing time as showing in picture E-2-b and the playing tracks as showing in picture E-2-c will alternatively indicates on the LCD player. dPress again to be back to play music . e Press to choose previous / next music, the playing tracks indicates on LCD display, as showing in picture E-2-c. E-2-a E-2-b E-2-c fWhen no USB flash drive is inserted in USB mode, the words no and USB will indicate on LCD alternately gWhen USB flash driver is inserted but no music file is detected, the words no and FILE will indicate on LCD alternately 3FM Radio aAfter power on, press Mode Switch to select FM Mode, LCD display as showing in picture E-3-a bPress and hold about 3 seconds, the player will automatically search in 87.5-108MHz and save max. 20 FM channels. To stop search, press again, then the player will go back to the first saved FM channel. cPress repeatedly to choose next FM channel that has been saved, as showing in picture E-3-b dManual Searching: Press repeatedly to search FM channel backwards / forwards (frequency will skip 0.1 MHz per each press.); Press and hold to search backwards / forwards until valid FM channel and play radio. E-3-a E-3-b 4Line in (External Audio Input) aConnect Line in cable to the Line-out or headphone jack of external device, and another terminal to the players Line-in jack, as showing in picture E-4-a bMake sure external device (such as MP3 player) is power on and works normally. cWhen power on, press Mode Switch to select Line-in Mode, the words LInE will indicate on LCD display, as showing in picture E-4-b;
5 dWhen no Line-in cable is connected in Line-in mode, the words no and LInE will indicate on LCD alternately MIC. VOL. E-4-a E-4-b 5Volume Up/ Down Press volume "+" / "-to increase or decrease output volume of speaker. Volume up to 10 levels, as showing in picture E-5.
( E-5 ) 6Use of Microphone aTake down the microphone and press "MIC ON/OFF" button, the microphone symbol
(pic. E-6-a) will appear on LCD when using the left microphone, and the microphone symbol
(pic. E-6-b) will appear on LCD when using the right microphone. E-6-a E-6-b bAim your mouth toward microphone about 1 ~ 2 cm distance, and adjust MIC VOL to proper volume to sing along with the music. cAfter usepress "MIC ON/OFF" button, the microphone symbol will disappear in the LCD screen accordingly, then put microphone back to its position of the player and adjust MIC VOL to minimum. 6