FCC ID: 2A66O-APS100 All-in-One Telehealth Video Terminal

All-in-One Telehealth Video Terminal Quick Start Guide 1 Appearance and Interface The terminal can be placed on horizontal desktop or installed on the TV and wall with bracket. Desktop Installation Place the terminal on the desktop, keep the desktop steady and pay attention to the anti-slip. Install on TV with Bracket (optional) Install on Wall with Bracket No. 1 Interface DC 12V 2 3 4 USB 3.0 USB 3.0 HDMI IN 5 HDMI OUT1 6 7 8 9 HDMI OUT2 Touch LAN PC 10 11 LINE IN LINE OUT Description Power interface Connect to U-disk, mouse, keyboard and other USB devices. Connect to U-disk, mouse, keyboard and other USB devices. Connect to PC or camera, support audio input. Connected to the terminal and HDTV with HDMI cable, support audio output and it will be muted automatically while use the built-in speaker. Connected to the terminal and HDTV with HDMI cable. Connect to tablet and other control device. Connect the terminal to the network with the network cable. Used as a camera and speakerphone when connect to PC. 3.5mm audio input interface 3.5mm audio output interface 2 Installation and Connection Warning Operating this equipment in a residential environment may cause radio interference. Connection The cable connections shown in the following figure contains optional configurations and for reference only. Please connect the cables according to actual needs. 3 Product Dimension PC LINE IN LINE OUT DC 12V USB 3.0 USB 3.0 HDMI IN HDMI OUT1 HDMI OUT2 Touch LAN P o w e r A d a p t e r U S B C a b l e U S B C a b l e H D M I C a b l e i A u d o C a b l e H D M I C a b l e i A u d o C a b l e H D M I C a b l e N e t w o r k C a b l e N e t w o r k C a b l e 0

. 5 3 1 2

. 9 9 12:34 12:34 min max min max JOHN DOE JOHN DOE MainStr eet, number, Cit y Name(Country) 123-456-789 www.yourdomain.com yourname@ domain.com 114.7 Power Plug MIC PC Computer Mixer HDTV Speaker HDTV Tablet Switch Power Connect 4 Troubleshooting Connect the power cord to the supplied power adapter, and then connect the terminal to the power outlet with the power adaptor. No Response Network Connect Connect LAN with the network cable;

Or, connect the LAN via Wi-Fi. Audio Input Audio input via the built-in microphone;

Or, connect a microphone to the USB interface with the USB Please try to reboot APS100. Not Enough Storage Space 1) System storage space is low, please make sure you have 250MB of free space and reboot APS100. 2) The total storage of APS100 is 8G, when storage space is not enough, please try to clear some data to release the storage. cable. Wi-Fi Network Cannot Access the Internet Connect a mixer to the LINE IN interface with the 3.5mm cable. Please contact with Caregility IT department to check whether the Audio Output Audio output via the built-in speaker;

device has the permission to access the Internet. Or, connect TV to the HDMI OUT1 interface with the HDMI cable;

Or, connect a speaker to the LINE OUT interface with the 3.5mm 5 Cleaning Guide cable. Image Input Image input via the built-in camera. Connect camera to the HDMI IN interface with the HDMI cable;

Or, connect a PC or other devices to the HDMI IN interface with the HDMI cable. Image Output Connect TV and other display devices to the HDMI OUT1 interface with the HDMI cable to output the main image. Connect TV and other display devices to the HDMI OUT2 interface with the HDMI cable to output the second image. For the Whole Camera Cleaning The user can take a rag, dip in Ethyl Alcohol Absolute to wipe the appearance gently. For the Speaker Cover Cleaning Fabric model: CY-B51-1, the main component is polyester fiber, the surface of the fabric is treated with waterproof technology, and the backside viscose technology is added. Cleaning Precautions Wipe with soft brush at room temperature. No long-term alkali resistance, please choose a neutral volatile cleaning agent.

*Although we have done and passed the corrosion resistance test of chemical reagents, for the long-term cleaning and maintenance of APS100, it is recommended to use Ethyl Alcohol Absolute for cleaning. 6 Important Safety Instructions 8 ISED Compliance Statements Parts of the ME EQUIPMENT that are not serviced or maintained This device contains licence-exempt transmitter(s)/receiver(s) that while in use with the patient. comply with Innovation, Science and Economic Development Instructions provided indicating not to position ME EQUIPMENT Canadas licence-exempt RSS(s). Operation is subject to the to make it difficult to operate the disconnection device. following two conditions: (1 )This device may not cause Warning statement that addressed the HAZARDS the ME interference.(2)This device must accept any interference, including EQUIPMENT. interference that may cause undesired operation of the device. Unplug the power cable to power off. Lmetteur/rcepteur exempt de licence contenu dans le prsent Do not leave the equipment in an uncontrolled environment appareil est conforme aux CNR dInnovation, Sciences et where the storage temperature is below -20 C (-4 F) or above 60 Dveloppement conomique Canada applicables aux appareils C (140 F) and the relative humidity is below 30% or above 75%

radio exempts de licence. Lexploitation est autorise aux deux it may damage the equipment. conditions suivantes :(1)Lappareil ne doit pas produire de 7 FCC Compliance Statements brouillage; (2)Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. This device complies with Part 15 of the FCC Rules. Operation is This equipment complies with IC RSS-102 radiation exposure limits subject to the following two conditions: (1) this device may not set forth for an uncontrolled environment. This equipment should cause harmful interference, and (2) this device must accept any be installed and operated with minimum distance 20cm between interference received, including interference that the radiator and your body. may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 20cm entre le radiateur et votre corps. against harmful interference in a residential installation. This a) The device for operation in the band 5150-5250 MHz is only for equipment generates, uses and can radiate radio frequency energy indoor use to reduce the potential for harmful interference to and, if not installed and used in accordance with the instructions, co-channel mobile satellite systems;

may cause harmful interference to radio communications. b) The maximum antenna gain permitted for devices in the band However, there is no guarantee that interference will not occur in a 5725-5825 MHz shall comply with the e.i.r.p. limits specified for particular installation. point-to-point and non point-to-point operation as If this equipment does cause harmful interference to radio or appropriate. television reception, which can be determined by turning the c) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont equipment off and on, the user is encouraged to try to correct the rservs uniquement pour uneutilisation lintrieur afin de interference by one or more of the following measures:

rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

Le gain maximal dantenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz). doit se conformer la limite de p.i.r.e. spcifie pour lexploitation point point et non point point, selon le cas.

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. 9 EMC Guidance 10 Product Specifications Warning: Dont use near active HF surgical equipment and the RF shielded room of an ME system for magnetic resonance imaging, where the intensity of EM disturbances is high. Warning: Use of this equipment adjacent to or stacked with other You should now recycle your waste electrical goods and in doing so equipment should be avoided because it could result in improper help the environment. This symbol means an electrical product operation. If such use is necessary, this equipment and the other should not be disposed of with normal household waste. Please equipment should be observed to verify that they are operating ensure it is taken to a suitable facility for disposal when finished with. normally. Warning: Use of accessories, transducers, and cables other than those specified or provided by the manufacturer of this equipment Hereby, Caregility declare that the radio equipment type APS100 is compliance with Directive 2014/53/EU. could result in increased electromagnetic emissions or decreased The equipment has passed IEC certification entries, and electromagnetic immunity of this equipment and result in CB mark is allowed to be added legally. improper operation. Warning: Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 12 in (30 cm) to any part of the equipment, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result. Compliance Group 1 Guidance and Manufacturers Declaration Electromagnetic Emissions Emissions test RF emissions CISPR 11 RF emissions CISPR 11 Harmonic emissions IEC 61000-3-2 Voltage fluctuations/

flicker emissions IEC 61000-3-3 Complies Class B Class A Users are recommended to read this manual before using this device. Operating Environment:

Temperature: 0C ~ 40C Relative Humidity: 10% ~ 80% R.H. Atmospheric Pressure: 80kPa ~ 106kPa Storage Environment:

Temperature: -20C ~ 60C Relative Humidity: 30% ~ 75% R.H Atmospheric Pressure: 70kPa ~106kPa;

Product Information:

Manufacturer Name: Caregility Manufacturer Address: 81 Corbett Way Eatontown, NJ 07724, United States of America Model Name: APS100 Adapter: It is part of ME equipment Device Input: 12V 3A Power Input: AC100-240V~50/60Hz 1.2A Serial No.: APS100YYYYMMDDXXXX (e.g. APS100202210140001) Infrared Light: Wave crest 850nm, optical power 550mW (max.) Intended Use: The APS100 is intended to provide two-way video and audio between the remote clinician and the patient bedside. 079.79.1101XXX_V1.0

%- caregility All-in-One Telehealth Video Terminal Model: APS100 Input: 12V S>z 3A Fe C FCC ID: 2A660-APS100 IC :28672-APS100 CB D4 Serial Number: APS100202303270001 Cli] =

NJ 07724, United States of America Made in China Address: 81 Corbett Way, Eatontown,

Caregility TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC ID: 2A660-APS100 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions Software Security Description The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Print Name: Brad Goodwin Title: Compliance Manager wows A -

On behalf of Company: Caregility Telephone: (908) 489-5545 E-mail: bgoodwin@caregility.com

SGS North America Inc. i i Beco omy erence ne Applicant Declaration SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Caregility Address 81 Corbett Way,Eatontown, New Jersey 07724 United States Grantee Code 2A660 FCC ID 2A660-APS100 Brad Goodwin Authorized Contact Name Contact Email bgoodwin@caregility.com Contact Phone (908) 489-5545

|, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, c) _ if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCCs technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shall, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. 9) Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technol Link to KDBs: https://apps.fcc.gov/oetcffkdb/index.cfm Link to RSP-100: https://www.ic.qc.ca/eic/site/smt-gst.nsfleng/sf01130.htm!

Link to the Covered List: Covered List ies-systems-and-innovation-division/rules-requlations-title-47

| [Caregility] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. i {Caregility] (the applicant) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to 1.50002, as an entity producing covered equipment. Applicant Signature: Date: 2023-4-26 Print Name: Brad Goodwin Title:

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Compliance Manager |

QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021

Caregility Date: 2023-04-25 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 24660-APSi00 To whom it may concern:

We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Shenzhen Branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Caregility. This authorization is valid until further written notice from the applicant. Sincerely, Title: Compliance Manager On behalf of Company: Caregility Telephone: (908) 489-5545 E-mail: bgoodwin@caregility.com

UNITED STATES DESIGNATED AGENT LETTER Date: 2023-05-25 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name:

Grantee Code:

Contact Name:

Address:

City/Province/Zip:

Telephone:

Fax:

Email:

Caregility 2A660 Brad Goodwin 81 Corbett Way, Eatontown, New Jersey 07724 United States

(908) 489-5545 bgoodwin@caregility.com Applicable Equipment: FCC ID: 2A660-APS1 OO ATTN: Director of Certification:

U.S. designated agent Company Name:

Contact Name:

Caregility Brad Goodwin Address:

City/Province/Zip:

Telephone:

Fax:

Email:

81 Corbett Way, Eatontown, New Jersey 07724 United States

(908) 489-5545 bgoodwin@caregility.com We, Caregility understand and acknowledge the applicants consent and the designated agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Caregility acknowledge the applicant's acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant IJ.S. designated agent Name (Printed): Brad Goodwin Name (Printed): Brad Goodwin Title: Compliance Signature:

Title: Compliance anage Signature