FCC ID: 2A66O-APS100W All in One Telehealth Video Terminal

All in One Telehealth Terminal Quick Start Guide 1 Appearance and Interface The terminal can be placed on horizontal desktop or installed on the TV and wall with bracket. Desktop Installation Place the terminal on the desktop, keep the desktop steady and pay attention to the anti-slip. Install on TV with Bracket (optional) Install on Wall with Bracket NO. Name DC 12V 1 2 3 4 5 USB 2.0 USB 3.0 HDMI IN HDMI OUT2 6 HDMI OUT1 7 8 9 Touch LAN PC 10 11 LINE IN LINE OUT Description Power interface Connect to U-disk, Mouse, Keyboard and other USB devices. Connect to U-disk, Mouse, Keyboard and other USB devices. Connect to PC or camera, support audio input. Connected to the terminal and HDTV with HDMI cable. Connected to the terminal and HDTV with HDMI cable, support audio output and it will be muted automatically while use the built-in speaker. Connect to tablet and other control device. Connect the terminal to the network with the network cable. Used as a camera and speakerphone when connect to PC. Audio input interface Audio output interface 2 Installation and Connection This is class A production. Electromagnetic radiation at specific frequencies may affect the image quality of TV in home environment. SpeakerIndicatorMicrophoneInfraredCompensation LightDC 12VUSB 2.0USB 3.0PCLINE INLINE OUTHDMIINHDMIOUT2HDMIOUT1TouchLANDC 12VUSB 2.0USB 3.0PCLINE INLINE OUTHDMIINHDMIOUT2HDMIOUT1TouchLAN1234567891011WarningBottom InstallationTop Installation123456 The cable connections shown in the following figure contains optional configurations and for reference only. Please connect the 3 Product Dimension cables according to actual needs. Power Connect Connect the power cord to the supplied power adapter, and then connect the terminal to the power outlet with the power 4 Cleaning Guide adaptor. Network Connect Connect LAN with the network cable;

Or, connect the LAN via Wi-Fi. Audio Input Audio input via the built-in microphone;

Or, connect a microphone to the USB interface with the USB cable. For the whole camera cleaning The user can take a rag, dip in Ethyl Alcohol Absolute to wipe the appearance gently. For the speaker cover cleaning Fabric model: CY-B51-1, the main component is polyester fiber, the surface of the fabric is treated with waterproof technology, and the backside viscose technology is added. Connect a mixer to the LINE IN interface with the 3.5mm cable. Pay attention to the following when cleaning:

Audio Output Audio output via the built-in speaker;

Or, connect TV to the HDMI OUT1 interface with the HDMI cable;

Or, connect a speaker to the LINE OUT interface with the 3.5mm cable. Image Input Image input via the built-in camera. Connect camera to the HDMI IN interface with the HDMI cable;

Or, connect a PC or other devices to the HDMI IN interface with the HDMI cable. Image Output Connect TV and other display devices to the HDMI OUT1 Wipe with soft brush at room temperature. No long-term alkali resistance, please choose a neutral volatile cleaning agent.

*Although we have done and passed the corrosion resistance test of chemical reagents, for the long-term cleaning and maintenance of the APS100W device, it is recommended to use Ethyl Alcohol Absolute for cleaning. 5 Important Safety Instructions Parts of the ME EQUIPMENT that are not serviced or maintained while in use with the patient. Instructions provided indicating not to position ME EQUIPMENT interface with the HDMI cable to output the main image. to make it difficult to operate the disconnection device. Connect TV and other display devices to the HDMI OUT2 Warning statement that addressed the HAZARDS the ME interface with the HDMI cable to output the second image. EQUIPMENT. Unplug the power cable to power off. Do not leave the equipment in an uncontrolled environment where the storage temperature is below -20 C (-4 F) or above 60 C (140 F) and the relative humidity is below 30% or above 75%

it may damage the equipment. Audio CableNetwork CableNetwork CableAudio CableSpeakerMixerSwitchPower PlugPower AdapterComputerPCHDMI CableHDMI CableHDMI CableUSB CableUSB CableHDTVHDTVTabletMICminminmaxmaxJOHN DOE12:34JOHN DOE12:34MainStreet, number,City Name(Country)123-456-789www.yourdomain.comyourname@domain.comDC 12VUSB 2.0USB 3.0PCLINE INLINE OUTHDMIINHDMIOUT2HDMIOUT1TouchLANDC 12VUSB 2.0USB 3.0LINE INLINE OUTHDMIINHDMIOUT2HDMIOUT1TouchLANPC135.0114.799.2 6 FCC Compliance Statements compromettre le fonctionnement. radiolectrique subi, mme si le brouillage est susceptible den This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet quipement est conforme aux limites d'exposition aux radiations IC CNR-102 tablies pour un environnement non Note: This equipment has been tested and found to comply with contrl. Cet quipement doit tre install et utilis avec une the limits for a Class B digital device, pursuant to Part 15 of the FCC distance minimale de 20cm entre le radiateur et votre corps. Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a a) The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

b) The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as particular installation. appropriate. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

a) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour uneutilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;

-- Reorient or relocate the receiving antenna. Le gain maximal dantenne permis (pour les dispositifs utilisant la

-- Increase the separation between the equipment and receiver. bande 5725-5825 MHz). doit se conformer la limite de p.i.r.e.

-- Connect the equipment into an outlet on a circuit different from spcifie pour lexploitation point point et non point point, that to which the receiver is connected. selon le cas.

-- Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to You should now recycle your waste electrical goods and in doing so operate the equipment. help the environment. This symbol means an electrical product This equipment complies with FCC radiation exposure limits set should not be disposed of with normal household waste. Please forth for an uncontrolled environment. This equipment should be ensure it is taken to a suitable facility for disposal when finished installed and operated with minimum distance 20cm between the with. radiator and your body. Product Information:

Manufacturer name: Caregility Address: 81 Corbett Way Eatontown, NJ 07724, United States of America Model: APS100W 7 ISED Compliance Statements This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions: (1 )This device may not cause interference.(2)This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :(1)Lappareil ne doit pas produire de brouillage; (2)Lappareil doit accepter tout brouillage 079.79.1101156_V2.0

it 4 caregility Allin One Telehealth Video Terminal Model: APS1O00W Input: 12V a= 3A FE C FCC ID: 2A66O-APS100W cB ony IC : 28672-APS100W Serial Number: APS100W2206070014 ees Address: 81 Corbett Way, Eatontown, NJ 07724, United States of America Made in China

Caregility TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: Confidentiality Request regarding application for FCC /D: 2A660-APS100W LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY (remark: sn FRAG EMUREAAEAKO, 45,00Rs10K, MMRAM RPEERE LER. Additionally, the applicant requests the following documents be held confidential until the device is marketed or 0 days from the grant date, whichever is less. If the device is marketed within 0 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) YE: AU RIRE EAI, UAE ; SRE RE BE, OUR SNF BB CCRT CARRE; WR, UM RB Sincerely, Print Name: Brad Goodwin Title: Compliance Manager Signature: Y { Gules On behalf of Company: Caregility Telephone: (908) 489-5545 E-mail: bgoodwin @caregility.com

SGS North America Inc. i i 620 Old Peachtree Road Applicant Declaration SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Caregility Address 81 Corbett Way,Eatontown, New Jersey 07724 United States Grantee Code 2A660 FCC ID 2A660-APS100W Authorized Contact Name Brad Goodwin Contact Email bgoodwin@caregility.com Contact Phone (908) 489-5545

|, the undersigned, certify that | am an authorized signatory for the Applicant and therefore declare;

a) b) 9) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for:

(1) labeling the equipment with the exact FCC ID as specified in this application,

(2) compliance statement labeling pursuant to the applicable rules,

(3) compliance of the equipment with the applicable technical rules, if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements. in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. in accordance with 1S017065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements.

(1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing.

(2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED.

(3) the Applicant shall, upon request by SGS, at the Applicant's expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a party for these purposes. the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.qc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Applicant Signature:

Date:2022-06-24 Ld Coda Print Name:_| Brad Goodwin Title:

Compliance Manager

*NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Declaration Rev:0.0

Caregility |

Date: 2022-06-24 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC /D: 2A660-APSLOOW To whom it may concern:

We, the undersigned, hereby authorize Compliance Certification Services (Kunshan) Inc and Kidd Yang in Compliance Certification Services (Kunshan) Inc to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, ] acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Caregility. This authorization is valid until further written notice from the applicant. Sincerely, Print Name: Brad Goodwin Title: Compliance Manager signature: fa, baum On behalf of Company: Caregility Telephone: (908) 489-5545 E-mail: bgoodwin@caregility.com Winkey Wang

Caregility We, Caregility declare that this EUT (FCC ID: 2A660-APS100W

& IC: 28672-APS100W) doesnt have ad Hoc Mode function on US/Canada frequencies. In addition, the frequency selection feature is disabled by firmware for devices marketed to the US/ Canada. For DTS part of this device, only channels 1-11 will be used in North America. Country code selection is disabled. Should you have any questions or comments regarding this matter, Please have my best attention. Sincerely yours, Print Name: Brad Goodwin Title: Compliance Manager Signature: Lead hoockn On behalf of Company: Caregility Telephone: (908) 489-5545 E-mail: bgoodwin@caregility.com