FCC ID: 2ADAL-32322A Clearsky T6

Catapult Clearsky T6 FCC Document Contents 1. OUTLINE.Pg.2 2. CLEARSKYT6TAG.Pg.24 3. SYSTEMLOGIN..Pg.45 4. COLLECTINGDATA..Pg.67 5. DOWNLOADINGDATA.Pg.78 6. SOFTWAREUSERGUIDELINKS..Pg.8 7. CLEARSKYANCHOR&CLEARSKYDOCKPg.910 8. SUPPORT&HELPPg.10 9. REGULATORYNOTICES..Pg.1011 1 1. OUTLINE The Catapult Clearsky T6 system is a professionalgrade Local Positioning System (LPS) designed to measure the performance of elite athletes within individual and team sports. This document introduces the Clearsky T6 hardware components and provides an explanation of functionality and general operation. The OpenField software system data are collected live and downloaded to the OpenField console and can then be uploaded to the OpenField cloud post session. To store the collected data on the OpenField cloud, data must be synced from the console to the cloud over a solid internet connection. The hardware components of the Clearsky system include the worn Clearsky tag, wireless Ultrawide Band

(UWB) anchors for LPS tracking and a charging case. 2. CLEARSKY T6 TAG The Clearsky T6 tag is a wearable LPS tag with embedded microsensors that is used to measure the performance of elite athletes, in both realtime and post session. The Clearsky T6 tag contains the following measurement sensors and components:

UWB (3973MHz to 4243MHz) radio transceiver UWB antenna Triaxial Accelerometer (up to 1000 Hz data rate) Triaxial Gyroscope (up to 1000 Hz data rate) Triaxial Magnetometer (up to 1000Hz data rate) Magnetic Heart Rate Receiver (5.4KHz frequency) Haptic feedback via vibration unit Tag status Lightemitting Diodes (LEDs) All sensors are sampling continuously, and data are logged onto an onboard eMMC card as well as transmitted live via ultrawideband (UWB). 2 Figure 1. Clearsky T6 wearable Tag TAG ICON/LED FUNCTIONALITY Flashing green Listening for Clearsky T6 Anchors Flashing green and then blue Connected to at least one Clearsky T6 Anchor Clearsky T6 Tag Operation Overview:

1. Charging: Each Clearsky T6 tag is charged and configured, prior to use, using the specifically designed Clearsky charging case. This is a 28tag case that connects to the mains electricity supply for the purpose of Clearsky T6 charging. 2. Configuration: Configuration of the Clearsky T6 occurs via USB serial connection from the charging case to the desktop software (OpenField) where athlete and tag settings are transferred and stored on the Clearsky T6 tag. This process occurs automatically as the tags are recognized by the system and each tag is assigned to an athlete. 3. Assigning Athletes to Tags: after logging in and pressing start, navigating to the settings menu will show athletes. Pressing autoassign will assign tag IDs to players and will then transfer this configuration to the tag as described above 4. Starting a live session: Connect the Clearsky Anchor via Ethernet. In the software from the main screen, press the quick start icon to start a live session. Clearsky T6 tags will show in active players once they connect to the anchor and data transmission will begin. You can check if data are being received by checking the orange and black bar in the top right corner of the interface. Press All in active players box then press +period to start recording. To end the live session, press the stop icon 5. Download Session: Turn the tags off by pressing the button on the front of the tag for 2 seconds and release. Place Clearsky T6 tags in Clearsky charging case, insert the power adapter into the charging case and connect the USB to PC. Press settings and then transfer. Press begin transfer. Once display says finished, data can be viewed from calendar. 3 TAG CONNECTORS & FEATURES Ring LED: Located on the front of the tag is a LED used to indicate the charging and enumeration state of the tag when in the charging case and the live status when out of the charging case. Power Button: The power button is on the front of the tag inside the ring LED. Charging Pins: Allows the tag to connect to the Clearsky charging case which enables the tag(s) to charge and connect / data transfer to the PC. Ensure the tags are fully charged before using them to collect data for a session. To charge the tags, connect the Clearsky charging case to a power supply and then place the tags into an individual dock slot on the Clearsky charging case. The LED ring will stop rotating when the tags have been fully charged. To turn the tag on, press the button on the front of the tag or set an alarm in the console. FIRST USE AND CHARGE VEST POUCH INSERTION players data. The tag is placed into the tag pocket located on the back of the vest. Please ensure the tag has been turned on the power button prior to inserting the tag into the vest. The tag is now ready to record your 3. SYSTEM LOGIN The software components of the Clearsky system consist of a cloud account and a downloadable console. 1) Each user will receive a unique username and password from a Catapult representative to log into their OpenField Cloud account. Each user can login to the cloud Account through one of the following URLs depending on their geographical location:

APAC (Australia Pacific and Asia): https://openfield.catapultsports.com EMEA (Europe, Middle East and Africa): https://eu.catapultsports.com US (North and South America): https://us.catapultsports.com 2) The OpenField Console Software can be downloaded from the OpenField Cloud. Login to the OpenField cloud with the account credentials and click the Downloads tab. Click the link under

'Secure Download' to download the latest version of the OpenField Console. You'll also find release notes regarding installations, changes, bugs, and improvements of the newest build. 4 3) Once the Open Field console is downloaded, click the desktop Icon to open the console. Log into the console with the same account credentials used to log into the cloud. 4. COLLECTING DATA COLLECTING LIVE DATA A Live Activity is an Activity being analysed in real time whilst the Tags are being used; this is achieved via Data being collected through the Clearsky LPS anchor (s). Live Activities are extremely useful to be able to provide realtime feedback on Athlete Performance. 1. Ensure the tags, console and anchor are all set to indoor or outdoor mode. 2. Turn on the wireless anchors(s) and the Clearsky tags. 3. Map each of the tags to their corresponding athlete via the Settings menu Mappings Tab in the console. 5 4. From the main user interface in the console, select Start to begin a new Live Activity. 5. Create a New Activity via the Activity Timeline by right clicking in the timeline area and selecting New Activity. From the new activity menu, fill in all of the details for the session such as Name, tag type, venue, teams, ect. Select Create Activity. 6. Hit the 'Play' Button up the top right of the User Interface; Once hit the button will change to a

'Pause' Button 7. Start a New Live Period and PIP Athletes as necessary. See our Periods article for more information on how to create and stop Periods. 8. When the Activity is completed, stop all live Periods and press the pause button. 6 5. DOWNLOADING DATA DataarerecordedontheTagina'RawFile',whichiscreatedeverytimetheTagisturnedon;upto 31RawFilescanbestoredonaTagatonce.DownloadingDatafromtheTagsisanimportantstepin getting the most out of the metrics recorded on the Tag. It is necessary to apply Sport Specific Algorithms(GKDives,QBThrowsetc.),forIMAmetricstobecalculatedandmore. 1. Afterasessioniscompleted,collectallthetagsfromathletes,turnthemoffandconnect thetagstothePCthroughtheClearskychargingcase. 2. OpenuptheOpenFieldconsoleandselectDataTransferfromtheConsoleTileScreen. 3. TheunitsconnectedtothePCwillautomaticallybegindownloading(beginningwiththe mostrecentfile,movingback)whenthe'DataTransfer'tileisselected. 1. ToreachtheDataTransferscreenwithoutanautomaticdownload,click'Start'fromthe ConsoleTileScreen,thenclick'Settings'inthetopleftoftheconsolescreen.Fromthe settingsmenu,selectthe'Transfer'tab. 2. ConnecttheTagstothePC,theninthe'DataTransfer'screen,ensurethecorrectnumberof tagsareconnected. fromthetag. 3. SelecttheTransferRangeofthesessionsyouwanttodownload.NOTE:TheDefaultRange enablestheusertodownloadallofthesessionsthathaventbeenpreviouslydownloaded OR 7 4. Select'BeginTransfer'tostartdownloadingthetags. 6. SOFTWARE USER GUIDE LINKS 1. How to create a new widget Console Widgets 2. Know live vs replay widget options Console Widgets 3. How to create a new dashboard on the cloud Cloud Dashboards 4. How to create a new widget on the cloud Cloud Widgets 5. How to customize a widget on the cloud Cloud Widgets 6. How to create a PDF report Generating a PDF report 7. How to create a bulk PDF report Bulk Export PDF Reports 8. How to export a CTR report CTR Reports 8 7. Clearsky Anchor & Clearsky Charging Case CLEARSKY ANCHOR Anchor Specification:

Ethernet UWB Antenna (3774.0 MHz to 4243.2 MHz) The waterresistant wireless anchor design is built to pick up tags for player data capture in a

~350meter range by using ultrawide band communication (4.0 GHz). The ultrawide bandwidth provides more robust communication between tags and anchors(s) and improves immunity to thirdparty environmental interference, such as WiFi. The anchor is wireless and has a 12hour battery life. Users have the option to add multiple anchors to the same system to improve live data capture capabilities. To operate, press the single button on the side of the anchor and use the Ethernet cable provided to attach to the OpenField console laptop. Please see instructions above on starting realtime data collection. 9 CLEARSKY CHARGING CASE CaseSpecification:

USB Connectivity (typeB USB 2.0 transmission) The Clearsky charging case consists of 28 individual tag slots, a USB port and a power supply port. The USB port connects the tags to the PC via a USB cord to enable tag configuration and downloading of the raw files on the tags. To operate, plug the charging case into mains power with cables provided and then insert tags to charge. Enumerated tags will display a rotating green LED. Charging tags will display a fully green LED ring. 10 8. SUPPORT & HELP Any questions or requests for help with the OpenField software system or the CLEARSKY tags should be sent by email. The support email required is dependent on the users geographical location:

APAC: apac_support@catapultsports.com EMEA: emea_support@catapultsports.com AMERICAS: us_support@catapultsports.com LATAM: latam_support@catapultsports.com site. Please provide us with contact details including your name and your preferred email address. Let us know what the problem is and what equipment (computer & browser) you are using to access the Users can also request help through the online cloud platform. From the OpenField cloud main user interface, select Request Help in the top right corner of the page. The user will be prompted with a form. Please fill out this form to provide us with the necessary details to fix the issue. Note that there is knowledge center available at https://wearables.catapultsports.com/hc/enus that includes multiple getting started, how to and troubleshooting articles. Regulatory Notices USA Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital tag, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. 11 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This tag complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This tag may not cause harmful interference, and

(2) this tag must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement (Clearsky T6 Tag) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and must not be colocated or operating in conjunction with any other antenna or transmitter. For body worn operation, this device has been tested and meets FCC RF exposure guidelines. When used with an accessory that contains metal may not ensure compliance with FCC RF exposure guidelines. FCC Radiation Exposure Statement: (Clearsky Anchor) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and must not be colocated or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. Responsible Party Information Name:

Address: @USA Telephone number or Internet contact:

Canada CANICES3(B)/NMB3(B) This tag complies with Industry Canadas licenceexempt RSSs. Operation is subject to the following two conditions:

(1) This tag may not cause interference; and

(2) This tag must accept any interference, including interference that may cause undesired operation of the tag. LeprsentappareilestconformeauxCNRd'IndustrieCanadaapplicablesauxappareilsradioexempts delicence.L'exploitationestautoriseauxdeuxconditionssuivantes:

(1)l'appareilnedoitpasproduiredebrouillage,et

(2)l'utilisateurdel'appareildoitacceptertoutbrouillageradiolectriquesubi,mmesilebrouillageest susceptibled'encompromettrelefonctionnement. IMPORTANT NOTE:

IC Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528. 12 This equipment should be installed and operated with minimum distance 0cm between the radiator &

your body. 13

427C Made in Taiwan UWB Device Lithium Ion Battery Inside FCC ID: 2ADAL-32322A IC: 12403A-32322A Serial label/text to be placed here (NO CHANGE) Serial label Font: ORCB (5 digits) Serial label Font size: 14pt minimum Serial label Font colour: 4C (Laser Engraved) Font: Helvetica Light (NO CHANGE) Font size: 4pt Font colour: 427C 427C 4C Changes:

- Remove Old Catapult Logo & Website

- New Catapult Logo Copyright 2006 -2016 Catapult S ports Pty Ltd. -CONFIDE NTIAL-

This drawing is the exclusive property of Catapult Innovations, and must only be used for the purpose for which it is supplied and must be returned on demand. The contents of this drawing are strictly confidential and must not be copied, shown, published or otherwise disclosed to anyone outside Catapult Innovations without prior written consent. TO LER ANC ES UNLES S OT HER WISE SPE CIFIED DIME NS IONAL UP TO 6 mm OVE R 6 UP TO 30 mm OVE R 30 UP TO 120 mm OVE R 120 UP TO 400 mm OVE R 400 UP TO 1000 mm OVE R 1000 mm FLATNESS AND S TR AIG HTNES S ANG ULAR S UR FAC E FINIS H

- 0.1

- 0.2

- 0.3

- 0.5

- 0.8

- 1.2

- 0.2

- 0.5

- 1.6R a CONFIDENTIAL R ESP AR E A DR AWN CH E CKE D/1 BY JG DATE 06/11/17 E CR APP R . APP R OVE D S CALE 1:1 Cad File:

2776 R ear Ass embly Graphics R ea r Ass embly G raphics T6 Node S heet1 DOCU ME NT NUMBE R 2776 TYP E GR OUP R E GIS TE R No. C R E V ACN 120 113 000 AB N 86 857 020 774 A4 1 1 OF S HEE T

CATAPULT Date: September 30, 2019 Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID 2ADAL-32322A To whom it may concern:

We, the undersigned, hereby authorize SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Where our agent signs the application for certification on our behalf, | acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Catapult Sports Pty Ltd. This authorization is valid until further written notice from the applicant. Name (Printea: Mr Rick Wingfield Title: Chief Technology Officer Signature On behalf of Company: Catapult Sports Pty Ltd Telephone: +61400591215

< XOS ~aowre-

CATAPULT =. AMS To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Catapult Sports Pty Ltd 75-83 High St Prahran Melbourne Victoria 3181 Australia Regarding: Confidentiality Request regarding application for FCC ID 2ADAL-32322A LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, ie i) d. AO Signature:

Printed Name (on file with the FCC associated with the Grantee Code) Mr Rick Wingfield Title Chief Technology Officer Company Name Catapult Sports Pty Ltd

rN Ue Date: September 30, 2019 Federal Communications Commission Authorization and Evaluation Division Subject: declaration of composite/rated equipment for FCC ID: 2ADAL-32322A To whom it may concern, We, the undersigned, would like to declare that the composite portion categorized as Class B personal computers and peripherals has been authorized under the Suppliers Declaration of Conformity (SDoC) procedures. Sincerely, Signature:

Name (Printed): Mr Rick Wingfield Title: Chief Technology Officer On behalf of Company: Catapult Sports Pty Ltd Telephone: +61400591215