FCC ID: 2ADAL-VR7401 Receiver/Anchor

Catapult Vector FCC Document Contents 1. OUTLINE .Pg. 2 2. VECTOR S7 DEVICE Pg. 2 - 4 3. SYSTEM LOGIN ..Pg. 4 - 5 4. COLLECTING DATA ..Pg. 6 - 7 5. DOWNLOADING DATA Pg. 7 - 8 6. SOFTWARE USER GUIDE LINKS .. Pg. 8 7. VECTOR ANCHOR & VECTOR DOCK Pg. 9 - 10 8. SUPPORT & HELP Pg. 10 9. REGULATORY NOTICES .. Pg. 10 - 11 1 1. OUTLINE The Catapult Vector S7device is a professional-grade GNSS system designed to measure the performance of elite athletes within individual and team sports. This document introduces the Vector S7 hardware components and provides an explanation of functionality and general operation. The OpenField software system Data is collected live and downloaded to the OpenField console and can then be uploaded to the OpenField cloud post session. To store the collected data on the OpenField cloud, data must be synced from the console to the cloud over a solid internet connection. Users have the option to use the OpenField+ mobile/iPad app to view live data through a mobile or an iPad over a local Catapult Wi-Fi. This improves accessibility as it enables users to be more mobile around the pitch and to share live data more easily with coaches and players. The hardware components of the Vector system include the Vector devices, a wireless UWB receiver(s) for GPS/GNSS and RTLS tracking. 2. VECTOR S7 DEVICE The Vector S7 is a wearable (combined) GNSS / LPS device with embedded microsensors that is used to measure the performance of elite athletes, in both real-time and post session. The Vector S7 device contains the following measurement sensors and components:

GNSS module (10Hz GNSS / 18Hz GPS) GNSS antenna RTLS antenna Tri-axial Accelerometer (up to 1000 Hz) Tri-axial Gyroscope (up to 1000 Hz) Tri-axial Magnetometer (up to 1000Hz) Magnetic Heart Rate Receiver UWB Antenna (3774.0 MHz to 4243.2 MHz) ECG heart rate board (up to 250Hz) Bluetooth Low Energy Device status LEDs Haptic feedback via vibration unit All sensors are sampling continuously, and data is logged onto an onboard SD card as well as transmitted live via ultra-wide-band (UWB) or Bluetooth (BLE). 2 Figure 1. Vector S7 wearable Device DEVICE ICON/LED FUNCTIONALITY A: Indicates the state of the battery (charging, low battery, ect) B: Indicates a connection to the sateliete (GNSS) or ClearSky RTLS system. C: Indicates a connection to Heart Rate D: Indicates use of ultra-wide band. E: Indicates a connection to Bluetooth. Vector S7 Device Operation Overview:

1. Charging: Each Vector S7 device is charged and configured, prior to use, using the specifically designed Vector Dock. This is a 24-device tray that connects to mains supply mains supply for the purpose of Vector S7 charging. 2. Configuration: Configuration of the Vector S7 occurs via USB serial connection from the dock to the desktop software (OpenField) where athlete and device settings are transferred and stored on the Vector S7 device. This process occurs automatically as the devices are recognized by the system and as each device is assigned to an athlete. 3. Assigning Athletes to Devices: after logging in and pressing start, navigating to the settings menu will show athletes. Pressing auto-assign will assign device IDs to players and will then transfer this configuration to the devices as described above Starting a live session: Connect the Vector Anchor via USB. In the software from the main screen, press the quick start icon to start a live session. Vector S7 devices will show in active players once they obtain GNSS lock and data transmission will begin. You can check if data is incoming by checking the orange and black bar in the top right corner of the interface. Press All in active 4. 3 players box then press +period to start recording. To end the live session, press the stop icon 5. Download Session: Turn the devices off by pressing the button on the side of the device for 2 seconds and release. Place Vector S7 devices in Vector Dock press the dock ignition button and connect USB to PC. Press settings then transfer. Press begin transfer. Once display says finished, data can be viewed from calendar. DEVICE CONNECTORS & FEATURES Top Charging LED: Located on the top of the device is a LED used to indicate the charging and enumeration state of the device. Power Button: The power button has been placed on the edge of the device to make the device harder to press during play and thus minimizing accidental device turn offs. HR pins: Allows the user to clip the device into a vest to collect HR data using an intergrated heart rate vest. Charging Pins: Allows the device to connect to the Vector Dock which enables the device(s) to charge and connect / data transfer to the PC. FIRST USE AND CHARGE Ensure the devices are fully charged before using them to collect data for a session. To charge the devices, connect the Vector Dock to a power supply and then place the devices into an individual dock slot on the Vector charging dock. The top LED charging light will flash when the device is charging. The top battery LED turns solid green when the device is fully charged. To turn the device on, press the button on the side of the device or set an alarm in the console. VEST POUCH INSERTION The device is placed into the device pocket located on the back of the vest. It is clipped into the vest via the HR Clips located on the back of the device. Please ensure the device has been turned on the power button prior to inserting the device into the vest. The device is now ready to record your players data. 4 3. SYSTEM LOGIN The software components of the Vector system consist of a cloud account and a downloadable console. 1) Each user will receive a unique username and password from a Catapult representative to log into their OpenField Cloud account. Each user can login to the cloud Account through one of the following URLs depending on their geographical location:

APAC (Australia Pacific and Asia): https://openfield.catapultsports.com EMEA (Europe, Middle East and Africa): https://eu.catapultsports.com US (North and South America): https://us.catapultsports.com 2) The OpenField Console Software can be downloaded from the OpenField Cloud. Login to the OpenField cloud with the account credentials and click the Downloads tab. Click the link under

'Secure Download' to download the latest version of the OpenField Console. You'll also find release notes regarding installations, changes, bugs, and improvements of the newest build. 3) Once the Open Field console is downloaded, click the desktop Icon to open the console. Log into the console with the same account credentials used to log into the cloud. 5 4. COLLECTING DATA COLLECTING LIVE DATA (GPS/GNSS) A Live Activity is an Activity being analysed in real time whilst the Devices are being used; this is achieved via Data being collected through the Vector receiver (GNSS) or Anchors (LPS). Live Activities are extremely useful to be able to provide real time feedback on Athlete Performance. 1. Ensure the devices, console and receiver are all set to same mode. 2. Turn on the wireless receiver(s) and the Vector devices. 3. Map each of the devices to their corresponding athlete via the Settings menu Mappings Tab in the console. 4. From the main user interface in the console, select Start to begin a new Live Activity. 5. Create a New Activity via the Activity Timeline by right clicking in the timeline area and selecting New Activity. From the new activity menu, fill in all of the details for the session such as Name, device type, venue, teams, ect. Select Create Activity. 6 6. Hit the 'Play' Button up the top right of the User Interface; Once hit the button will change to a

'Pause' Button 7. Start a New Live Period and PIP Athletes as necessary. See our Periods article for more information on how to create and stop Periods. 8. When the Activity is completed, stop all live Periods and press the pause button. 7 5. DOWNLOADING DATA Data is recorded on the Device in a 'Raw File', which is created every time the Device is turned on; up to 31 Raw Files can be stored on a Device at once. Downloading Data from the Devices is an important step in getting the most out of the metrics recorded on the Device. It is necessary to apply Sport Specific Algorithms (GK Dives, QB Throws etc.), for IMA metrics to be calculated and more. 1. After a session is completed, collect all the devices from athletes, turn them off and connect the devices to the PC through the Vector Dock. 2. Open up the OpenField console and select Data Transfer from the Console Tile Screen. 3. The units connected to the PC will automatically begin downloading (beginning with the most recent file, moving back) when the 'Data Transfer' tile is selected. OR 1. To reach the Data Transfer screen without an automatic download, click 'Start' from the Console Tile Screen, then click 'Settings' in the top left of the console screen. From the 2. Connect the Devices to the PC, then in the 'Data Transfer' screen, ensure the correct number settings menu, select the 'Transfer' tab. of devices are connected. 3. Select the Transfer Range of the sessions you want to download. NOTE: The Default Range enables the user to download all of the sessions that havent been previously downloaded from the device. 4. Select 'Begin Transfer' to start downloading the devices. 8 6. SOFTWARE USER GUIDE LINKS 1. How to create a new widget - Console Widgets 2. Know live vs replay widget options - Console Widgets 3. How to create a new dashboard on the cloud - Cloud Dashboards 4. How to create a new widget on the cloud - Cloud Widgets 5. How to customize a widget on the cloud - Cloud Widgets 6. How to create a PDF report - Generating a PDF report 7. How to create a bulk PDF report - Bulk Export PDF Reports 8. How to export a CTR report - CTR Reports 9 7. Vector Anchor & Vector Dock VECTOR ANCHOR Anchor Specification:

GNSS Antenna (GPS and Glonass) Wi-Fi (dual band 2.4GHz and 5GHz) USB C UWB Antenna (3774.0 MHz to 4243.2 MHz) The wireless receiver design is built to pick up devices for player data capture by using ultra-wide band communication (4.0 GHz). The ultra-wide bandwidth provides more robust communication between devices and receiver(s) and improves immunity to third party environmental interference such as, Wi-Fi. The receiver is wireless and has a 6 hours battery life, but Wi-Fi will be disabled when USB cable removed from the device. The receiver is also integrated into a Wi-Fi network that wirelessly links the OpenField console and mobile applications within a 50m range. This improves accessibility as a local Catapult Wi-Fi enables users to be more mobile around the pitch and to share live data more easily with coaches and players. Users have the option to add multiple anchors to the same system to improve live data capture capabilities. The GNSS antenna contained within the anchor serves the purpose of GNSS augmentation. To operate, press the single button on the side of the anchor and use the USB cable provided to attach to the OpenField console laptop. Please see instructions above on starting real-time data collection. This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties. 10 VECTOR DOCKING Dock Specification:

Ethernet connectivity 6 Hour battery life USB Connectivity Wi-Fi connectivity On board memory The Vector Smart Docking Station consists of 24 individual device slots, an ignition button, a USB port and a power supply port. The ignition button functionality gives the user the ability to turn on or off all connected devices with one button press. The USB port connects the devices to the PC via a USB cord to enable device configuration and downloading of the raw files on the devices. The Vector Dock is built to last up to 6 hours without a power supply with use of an onboard battery. This allows for pitch-side USB downloading and device configuration. The travel case for the Vector Smart Docking Station is built to accommodate all the systems wires, receivers and devices. To operate, plug dock into mains power with cables provided and press the silver ignition button. Insert devices to charge. Enumerated devices will display a flashing green light on top. Charging devices will display an amber light on top. 11 8. SUPPORT & HELP Any questions or requests for help with the OpenField software system or the VECTOR devices should be sent by email. The support email required is dependent on the users geographical location:

APAC: apac_support@catapultsports.com EMEA: emea_support@catapultsports.com AMERICAS: us_support@catapultsports.com LATAM: latam_support@catapultsports.com Please provide us with contact details including your name and your preferred email address. Let us know what the problem is and what equipment (computer & browser) you are using to access the site. Users can also request help through the online cloud platform. From the OpenField cloud main user interface, select Request Help in the top right corner of the page. The user will be prompted with a form. Please fill out this form to provide us with the necessary details to fix the issue. Note that there is knowledge center available at https://wearables.catapultsports.com/hc/en-us that includes multiple getting started, how to and troubleshooting articles. 12 Regulatory Notices USA Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement (Vector S7) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and must not be co-located or operating in conjunction with any other antenna or transmitter. For body worn operation, this device has been tested and meets FCC RF exposure guidelines. When used with an accessory that contains metal may not ensure compliance with FCC RF exposure guidelines. FCC Radiation Exposure Statement: (Vector Anchor) This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. 13 Canada CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IMPORTANT NOTE:

Radiation Exposure Statement (Vector S7) For body worn operation, this device has been tested and meets RF exposure guidelines when used with an accessory that contains no metal. Use of other accessories may not ensure compliance with RF exposure guidelines. Dclaration d'exposition aux radiations RF:

Pour une utilisation sur le corps, cet appareil a t test et respecte les directives sur l'exposition aux RF lorsqu'il est utilis avec un accessoire sans mtal. L'utilisation d'autres accessoires peut ne pas garantir la conformit aux directives d'exposition aux RF. Radiation Exposure Statement (Vector Anchor) 1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. 2. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. Dclaration d'exposition aux radiations RF:

1. Pour se conformer aux exigences de conformit RF canadienne l'exposition, cet appareil et son antenne ne doivent pas tre co-localiss ou fonctionnant en conjonction avec une autre antenne ou transmetteur. 2. Pour se conformer aux exigences de conformit CNR 102 RF exposition, une distance de sparation d'au moins 20 cm doit tre maintenue entre l'antenne de cet appareil et toutes les personnes 14

To:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Catapult Sports Pty Ltd 75-83 High St Prahran Melbourne Victoria 3181 Australia Regarding:

Confidentiality Request regarding application for FCC ID 2ADAL-VR7401 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. Delete any document that is NOT included in your application External Photos Internal Photos Test Setup Photos User manual(s) Sincerely, Signature:

Printed Name (on file with the FCC associated with the Grantee Code) Mr Rick Wingfield Title Chief Technology Officer Company Name Catapult Sports Pty Ltd

Date: June 21, 2019 TO:

Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID 2ADAL-VR7401 To whom it may concern:

We, the undersigned, hereby authorize SGS Taiwan Ltd. to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Catapult Sports Pty Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Mr Rick Wingfield Signature:

On behalf of Company: Catapult Sports Pty Ltd Telephone: +61400591215 Title: Chief Technology Officer

WIFI Channel 12 & 13 Declaration Letter Date: June 21, 2019 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 RegardingFCCID:2ADALVR7401 To who it may concern, we have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 & 13 operating capability. Please check Product hardware does not have the capability to operate on channel 12 &

13 Product hardware has the capability to operate on channel 12 & 13. However , these 2 channels will be disabled via software and user will not able to enable these 2 channels Product hardware has the capability to operate on channel 12 & 13. And meeting KDB 594280 D01 requirement. Pls explain detail here. _________________ Others Pls explain detail here. Signature:

Name (Printed): Mr Rick Wingfield Title: Chief Technology Officer On behalf of Company: Catapult Sports Pty Ltd Telephone: +61400591215 Address: 75-83 High St., Prahran, Melbourne, Victoria 3181, Australia

DTS-UNII Device Declaration Letter To whom it may concern, we declare below featured for equipment authorization regarding FCC ID: 2ADAL-VR7401

(1) DFS Device --

Master, Client with Radar detection capability, Client without radar detection capability, N/A

(2) Active / Passive Scanning Frequency Band

(MHz) Active Scanning

(the device can transmit a probe

(beacon)) Yes , Yes , Yes , No No No passive scanning

(where the device is can listen only with no probes) Yes , No Yes , No Yes , No Ad Hoc Mode or WIFI Direct capability Yes , Yes , Yes , No No No 2412 - 2462MHz 5150 - 5250MHz 5725 - 5850MHz Date: June 21, 2019 Access point capability Yes , No Yes , No Yes , No Country code selection ability -

(3) If yes, pls explain how it was implemented: (pls also help to provide detail of options for each country selection)

(4) Pls check below:

This can be set only by authorized employees. Meet 15.202 requirement - Yes , Yes , No No A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices. A client device is defined as a device operating in a mode in which the transmissions of the device are under For client devices that have software configuration control to operate in different modes (active scanning in control of the master. A device in client mode is not able to initiate a network.

(5) some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply, Yes , please see SW security Description. No Apply, (If apply, pls help to provide explanation on it was implement, and how software was controlled) Signature:

Name (Printed): Mr Rick Wingfield Title: Chief Technology Officer On behalf of Company: Catapult Sports Pty Ltd Telephone: +61400591215 Address: 75-83 High St., Prahran, Melbourne, Victoria 3181, Australia