Product Data Sheet IRIS Smart Button 3460-L Product Overview The Iris Smart Button can be customized to trigger events, scenes, or notifications in your connected home system. Less than two inches wide, the Smart Button can be installed on nearly any surface with adhesive or screws. Use the Smart Button to control LED lights, without the need for wiring. The Smart Button fully supports ZigBee HA 1.2, giving it a wide range of compatible platforms and unlimited options for connected home control. Last Updated: May 2015 Dimensions 1.75
(44.5mm) 0.57
(15.5mm) 1.75
(44.5mm) FRONT VIEW SIDE In the Box:
1x - Iris Smart Button 1x - Mounting Bracket 1x - Mounting Adhesive 1x - CR-2450 Battery (pre-installed) 1x - Quick Start Guide Key Features:
Easy-to-install mounting plate, or use with included adhesive tape. Built-in temperature sensor. Easy compatibility with other manufacturers ZigBee HA 1.2 devices. Pull-to-pair joining process. Over-the-air firmware updates. Data Sheet: 3-Series Micro Button (3420) 2015 Lowes Iris. All rights reserved. Page 1 of 3 Use Cases Control smart bulbs from anywhere in the home. Trigger welcome or goodbye scenes. Arm your security system with ease. Automate lights, fans, and blinds Control smart bulbs from anywhere in the home. The Smart Button can be configured to control smart LED bulbs, giving users options to add a light switch nearly anywhere without the need for wiring. Place the Smart Button on your bedside table to trigger goodnight scenes or arm you security system. Arm your security system. Quickly arm your security system without wasting time when leaving your home with the Iris Smart Button. Automate lights, fans, and blinds in rooms Place a Iris Smart Button on a side table to trigger lights and fans to automatically turn on and off. Trigger welcome or goodbye scenes. Your house can now welcome you home as you return from work and conserve energy while youre away. Use the Iris Smart Button in the morning by having it put thermostats in deep setback and turning off unnecessary lighting. Special Features Easy Mounting Options The Iris Smart Button can be installed using either adhesive strips or mounting screws (both included). The easy-to-install mounting plate attaches with a single screw and the sensor simply slides into place on the mount. Pull-to-Pair Join Process All Iris sensors feature pull-to-pair joining. The device ships with the battery pre-installed and all that is needed to begin the joining process is to pull out a small plastic tab from the bottom of the device. There is nothing for the user to take apart or put back together. Getting Started Step 1: Open ZigBee Network for Joining Using your controller or hubs interface, enable the ZigBee network for joining. Step 2: Pull Tab from Side of Sensor Pull the small plastic tab out from the side of the sensor and it will immediately begin searching for a network to join. Step 2: Finish Joining at Hub (optional) Some hubs and controllers require additional steps such as naming or categorizing the device. ZigBee Home Automation 1.2 Compatibility The Iris Smart Button is fully ZigBee HA 1.2 certified and is guaranteed to function with all open, ZigBee HA 1.2-certified hubs and devices. Superior Range and Updatability The Iris Smart Button supports over-the-air updates providing for seamless upgrades and feature additions without the need for any user interaction. Troubleshooting Step 1: Remove and Replace Battery from Device Open the battery tray on the side of the device. Remove battery and replace with a new CR-2450 battery. Reassemble and test operation. Step 2: Factory Reset and Rejoin Remove battery. While holding down the main button, reinsert battery to factory reset the device. Repeat the Getting Started steps to rejoin the ZigBee network. Compatibility The Iris Smart Button features out-of-the-box compatibility with the Lowes IRIS Hub and any ZigBee HA 1.2-certified hub, controller, bridge, or platform. Data Sheet: 3-Series Micro Button (3420) 2015 Lowes Iris. All rights reserved. Page 2 of 3 Technical Specifications Power 3V Rated:
Battery:
CR-2450 (1x) Battery Life: Up to 2 years Environmental Operating Temperature:
Shipping / Storage Temperature:
Humidity Range:
-20 to 50C 0 to 90% RH.
(non-condensing) 0 to 40C Approvals:
ZigBee HA 1.2 Wireless RF Protocol:
TX Strength: +3 dBm RF Channels: 16 Range:
130 ft. (40m) LOS Approvals This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation. Conforms to FCC Part 15B Contains FCC ID: T3L-SS012 IC: 12192A-SS012 Industry Canada licence-exempt RSS Standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment is in direct contact with the body of the user under normal operating conditions. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by CentraLite Systems, Inc. could void the users authority to operate the equipment. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes: (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Conformment la rglementation dIndustrie Canada, le prsent metteur radio peut fonctionner avec une antenne dun type et dun gain maximal (ou infrieur) approuv pour lmetteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique lintention des autres utilisateurs, il faut choisir le type dantenne et son gain de sorte que la puissance isotrope rayonne quivalente (p.i.r.e.) ne dpasse pas lintensit ncessaire ltablissement dune communication satisfaisante. Notice: Any content, factual information, or specifications containing errors in this document are solely inadvertent and will be corrected upon discovery. Specifications for unreleased/planned products are subject to change. Data Sheet: 3-Series Micro Button (3420) 2015 Lowes Iris. All rights reserved. Page 3 of 3