55 inch 4K ULTRA HD TV Users Manual

 

55SVL01 55 4K ULTRA HD TV USERS MANUAL For technical assistance or troubleshooting please call 1-866-594-5445 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (includ-

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. paratus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time.

-

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. shall be placed on the apparatus. 17. The mains plug or appliance coupler shall remain readily operable. 18. Use in outdoors: This TV is not designed for outdoors installation. Do not expose the TV to rain, as it may become damaged. Safety:

TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER

(OR BACK). NO USER SERVICEABLE PARTS ARE INSIDE. REFER TO QUALIFIED SERVICE TECHNICIAN ONLY. intended to alert the user to the presence of uninsulated dangerous voltage within the products to constitute a risk of electric shock to the users. Instruction: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. 1 Safety Instructions Please read these instructions carefully. This product complies with all applicable US federal safety requirements, as well as those of the Canadian Standards Association. 1. Cleaning Always unplug the TV before cleaning. Do not use liquid or aerosol cleaners. Use a soft, slightly damp cloth to clean. 2. Water and Moisture Do not use this TV near water. Avoid using this TV in an excessively damp environment. 3. Stand This TV should always be placed on a solid, sturdy surface. 4. Ventilation To prevent overheating, do not block or obstruct the vent openings on the TVs back panel. Also, avoid placing this TV in a confined area with poor air flow. 5. Power Sources This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of The type of power supply to your home, consult your electronics retailer or local power company. 6. Power Cord Polarization This TV is equipped with a three-wire grounding type plug, a plug with a third (grounding) pin. As a safety feature, this plug will only t into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician to replace the obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. 7. Power Cord Protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the TV. 8. Lightning To protect the TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV from lightning and power-line surges. 2 Safety Instructions 9. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the TV be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built up static charges. Article 810 of the National Electri-

cal Code (U.S. A.), ANSI / NFPA 70 provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of anten-

na-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. Example of Grounding According to National Electrical Code Instructions Ground Clamp Antenna Lead in Wire Electric Service Equipment Antenna Discharge Unit

(NEC Section 810-20) Grounding Conductor

(NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H) NEC - National Electrical Code 10. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall on to power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 11. Overloading 12. Object and Liquid Entry Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-out TV. 13. Servicing Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or 14. Damage Requiring Service a. If the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the TV has been exposed to rain or water. d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will e. If the TV has been dropped or the cabinet has been damaged. f. If the TV exhibits a distinct change in performance. 3 Safety Instructions 15. Replacement Parts When replacement parts are required, be sure that only an authorized service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards and void any warranty. 16. Safety Check Upon completion of any service or repairs to this TV, ask the service technician to perform safety checks to determine whether the product is in proper operating condition. 17. Wall Mounting The TV should be mounted to a wall only by a professional. The TV may slide or fall, causing serious injury to a child or adult, and serious damage to the product. Warranty shall be voided. 18. Heat The TV should be situated away from heat sources such as radiators, heat registers, stoves, or other products

(including amplifiers) that produce heat. NOTE TO CABLE / TV INSTALLER:

This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (USA). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building, as close to the point of the cable entry as practical. FCC REGULATORY INFORMATION:

This television has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-

tial installation. This television generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this television does cause interference to other electronic equipment, which can be determined by turning the television off and on, then the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and television.

- Connect the equipment into an outlet on a circuit different from that to which the television is connected.

- Consult your dealer or an experienced radio / TV technician for assistance. Any changes or modifications not expressly approved by the party responsible for compliance may void the users authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. 4 Table of Contents Important Safety Instructions .........................................................................................................................................1 Table of Contents ..........................................................................................................................................................5 Introduction ....................................................................................................................................................................6 Installing the Base .........................................................................................................................................................7 Battery Install .................................................................................................................................................................8 Overview .......................................................................................................................................................................9 Remote Control TV Overview Connecting External Devices Customizing TV Settings Front Panel Rear Panel ..................................................................... ................................................................................................................................................................ 10

............................................................................................11

...............................................................................................................................12

.......................................................................................................................................13

...........................................................................................................................................................29 Troubleshooting .......................................................................................................................................................30 5 Introduction Whats In The Box teg lliw koob noitcurtsni sihT .snoitcnuf dna serutaef tuoba snoitseuq evah uoy revenehw ediug siht ot refer esaelP you up and running with the best possible connection type for your devices. Enjoy!

The package includes the following items. Save the carton & packing for future shipping

Remote Control

AAA Batteries (2)

Quick Start Guide

User Manual

Child Safety

Pedestal Base

Screws for Pedestal Base (4)

Remote Control

AAA Batteries x 2

User manual

Quick Start Guide

Child Safety

Base Legs

Screws for Base Legs Wall Mount Information This TV uses a 400x200 VESA mounting bracket attachment pattern. Please take this information with you when purchasing a wall mount for this TV. 6 Installing the Base 1 Place the TV face down on a soft cloth or cushion. Position base as shown. Insert 4 screws (provided) through the holes in the bottom of the base into the post holes and tighten securely. Do not over-tighten. 7 Remote Control Battery Install Your remote control handset is powered by two (2) AAA type batteries

Turn the remote over and remove battery cover.

Place two (2) AAA batteries into the battery compartment with the +

and - ends facing as indicated.

Replace the cover

Effective remote range is approximately 16 feet at an angle of no greater than 30 to the left / right or 20 up /

down to the IR sensor.

To avoid possible damage from battery chemical leakage, remove the batteries if you do not plan to use the remote for an extended period of time. Do not mix batteries of different age and / or type. Always discard used batteries safely.

Do not expose the remote control to liquids, direct sun-

light or sources of excessive heat.

The IR receiver on the TV will not work properly if the set is in direct sunlight. NOTE: Improper use of batteries can result in a chemical leakage or explosion. 30 30 IR Receiver 8 Remote Control Overview the selection.

:Mute and restore TV sound.

:Allows you to navigate the on

:Return to the previous viewing

:Switch the TV between On and Standby

:Enter multiple program channel number 1. mode. 2. 3. 0~9:Select a program.(ATV/DTV mode) 4. such as 2-1. 5. channel. 6. APP:Press to select the desired APP. 7. MENU:Display the main menu. 8. SOURCE:Select among the different input signal sources:TV/AV/COMPONENT/HDMI1/

HDMI2/HDMI3/VGA/USB. 9. screen display menus and adjust the system settings to your preference. 10. OK:

11. RETURN:Return to previous menu. 12. EXIT:Exit the on screen display menu. 13. ASPECT:Select the aspect ratio. settings:standard/wide/wide zoom/zoom/Just Scan

(HDMI)/Dot by Dot(VGA). 14. VOL+/-:Adjust the volume. 15. CH :Select the channel. 16. TV:Into the TV channel. 17. 18. 19. 20. chapter/track/photo. 21. track/photo. 22. FREEZE:Freeze the picture. 23. 24. ADD/ERASE:Add or delete Favorite channels. 25. FAV:Display the favorite channel list. 26. INFO:Display the present screen information such as the current channel and input source. 27. MTS:Switch among different audio channels:STEREO/MONO/SAP. 28. CC:Closed Caption selection:ON/OFF/CC On Mute. 29. V-CHIP:Set up parental control. 30. P.MODE:Select picture mode:dynamic/movie/

user/standard. 31. S.MODE:Select sound mode:standard/music/

movie/user. 32. CH.LIST:Display program list.

:Start playback or pause.

:Reverse playback rapidly.

:Advance playback rapidly.

:Skip to the beginning of the previous

:Skip to the beginning of the next chapter/

:Stop the playback. TV 9 TV Overview Front & Rear Panel IR Receiver A soft light illuminates when the television power is on. SOURCE TV AV COMPONENT HDMI 1 HDMI 2 HDMI 3 VGA USB 1. POWER - Press the POWER button to turn the TV ON/ OFF (power). The screen image will appear within a few seconds, and the LED will turn on. 2. Volume (+VOL-) - Press the VOL+ / VOL- buttons to adjust the volume up or down. 3.

( lennahC

+ HC

)

-

-

eht sserP CH

-

buttons to select a channel in the TV mode.

+ HC /

4. MENU - Press the MENU button to display. Press VOL+ to select from the 6 menu options available. Press the CH+ / CH- buttons to select a feature from the selected menu then press the VOL+/VOL- buttons to adjust the volume settings. 5. INPUT - After connecting your DVD, cable box, etc. select the appropriate input source to view. Press the INPUT button to display the input options. Press the CH+ / CH- buttons to highlight the input source and press the VOL+ button to select. 1 0 TV Overview Rear Panel NOTE: You must remove the pedestal before wall mounting. Wall Mounting It is recommended that you consult a professional before mounting this TV a wall. Use VESA 400x200 wall mount hardware. OPTICAL USB1 RJ45 HDMI1 HDMI2 VGA PC AUDIO TV HDMI3 L R CVBS/Y PB PR USB2 1. OPTICAL OUT - Connect to an AV Receiver for high quality digital audio. 2. USB Input Port supports MP3 and JPEG). 3. RJ45 - RJ45 plug for connecting to external modem or network access equipment. 4. HDMI1/2/3 IN - To connect to a High Definition (HD) signal output device, such as a set top box, blu ray disc player or AV receiver. 5. VGA - For PC display. 6. PC AUDIO - Connect it to the audio output terminal of PC. 7. CABLE-ANTENNA - Connect an antenna or cable connection Note: Use an outdoor antenna, cable or satellite for best reception. 8. EARPHONE - Connect a stereo headphone for private listening. 9. AV - Connect an external device to the composite VIDEO (V) and AUDIO (L/R) out jacks found on most equipment. 10. Component Y Pb Pr Input - Connect to an AV device that features component (Y Pb Pr) video and audio output jacks. for television reception. 1 1 Connecting External Devices 1 2 Customizing TV Settings Turning On/Off Your TV

Connect the power cord to the power socket after you have completed all the physical connections. At this stage, the TV will enter Standby Mode and the red LED indicator will illuminate.

In Standby Mode, press the button on the main unit or on the remote control to turn the TV on. The red LED indicator will turn blue. The POWER button on the main unit or on the remote control can only switch the TV into standby. To completely turn off the TV, please disconnect the power cord from the power socket.

The time you turn the TV on, it will go into the Setup Wizard. Press the Arrow buttons to highlight and select your desired mode and press OK to Initial Setup Welcome to the Element TV Setup Wizard. Follow this guide to help setup your TV to scan channels or access your external devices like your Antenna,Set-Top Box, Blu-ray,DVD,Gaming systems or other devices. Use the UP and DOWN arrows on your remote control or TV keypad to select the language of the on screen menu. Use the UP and DOWN arrows on your remote control or TV keypad to select your local time zone. person to):

3 1 Customizing TV Settings Initial Setup SCAN CHANNELS FROM THE ANNTENNA OR COAXIAL CABLE INPUT SCANNING CHANNELS 3 5 SCANNING CHANNELS Use the UP and DOWN arrows on your remote control or TV keypad to select the network scan type. SCANNING CHANNELS Auto scanning program stops manually. 4 6

If channels cannot be found, this frame will be displayed automatically. 4 1 Customizing TV Settings

Press SOURCE on the remote control or on the main unit to display the source menu, then use the Arrow buttons to cycle among the different input sources: TV/AV/COMPONENT/

HDMI/VGA/USB, then use the Arrow buttons to highlight the desired source and press OK to Source SOURCE TV AV COMPONENT HDMI 1 HDMI 2 HDMI 3 VGA USB Channel Selection

Press the CH /CH buttons on the main unit or on the remote control repeatedly to select the channel.

Press the 0-9 buttons on the remote control to select the channel directly. Press "4", and then press OK button to select channel 4. Press "4" and "5", and then press OK button to select channel 45. Press "1", "2" and "3", and then press OK button to select channel 123. Volume Adjustment

Press the VOL+/- buttons on the main unit or on the remote control to adjust the

If you wish to switch the sound off, press the MUTE button again or the VOL+

volume. button to resume the sound. 1 5 Customizing TV Settings Streaming

Press MENU button on the main unit or on the remote to display the main interface. Then use the Arrow buttons to select STREAMING and press OK to enter. Use the Arrow buttons to select the desired APP and press OK button to view. Or press the hotkey on the remote control to enter the desired APP directly. For full listing of available Apps, please visit elementelectronics.com. NETFLIX YouTube VUDU Pandora AccuWeather Enjoys TV shows & movies streamed instantly over the Internet. YouTube your way on the best screen in your house. Discover, watch and collect t he latest movies and TV shows in high quality 1080p. Free to sign up. No subscriptions, late fees or commitments. Free personalized radio that offers effortless and endless music enjoyment and discovery. Just start with the name of one of your favorite artists, songs, genres or composers and Pandora will do the rest. Its easy to create personalized stations that play only music youll love. Dis plays t he c urrent weat her c ondit ions and the temperature anywhere in the world in centigrade or Fahrenheit. 1 6 Customizing TV Settings Media

Press MENU button to display the main interface, then use the Arrow buttons to Select among Photos, Music and highlight MY MEDIA and press OK to Video to view what you like. Note: Portable drives should be inserted before entering MY MEDIA menu. Viewing Photos RETURN Directories:10 Files:0 Total:10

Use the Arrow buttons to highlight the PHOTOS option and press OK, then it will jump the inserted drive, press OK to enter. After entering PHOTOS, use the Arrow to buttons to select the picture and press OK to enter. RETURN Directories:10 Files:0 Total:10

After entering the picture file, use the Arrow buttons to select the desired picture, to display. When the picture is playing, the picture Function Bar will be then press the displayed. Use the Arrow buttons to select the desired function available on the bar. 1 7 Customizing TV Settings Listening To Music RETURN

Use the Arrow buttons to highlight the MUSIC option and press OK, then it will jump to confirm the inserted drive, press OK to enter. After entering MUSIC, use the Arrow buttons to select the audio and press OK to enter. Directories:10 Files:0 Total:10 RETURN TITLE:08.1 Hz L ALBUM:ABEX Test CD YEAR:

SAMPLE FREQUENCY:44100 BIT RATE: 128 TOTAL TIME:60 Directories:10 Files:0 Total:10

After entering the audio use the Arrow buttons to select the desired music, then press to display. When the music is playing, the music Function Bar will be displayed. Use the the Arrow buttons to select the desired function available on the bar. Watching Videos RETURN Directories:10 Files:0 Total:10

Use the Arrow buttons to highlight the VIDEOS option and press OK, then it will jump the inserted drive, press OK to enter. After entering VIDEOS, use the Arrow to buttons to select the video and press OK to enter. RETURN Directories:10 Files:0 Total:10

After entering the video use the Arrow buttons to select the desire video, then press to display. When the video is playing, the video function bar will be displayed. Use the the Arrow buttons to select the desired function available on the bar. 1 8 Customizing TV Settings TV Settings

Press the MENU button on the main unit or on the remote control to display the main interface. Then use the Arrow buttons to highlight TV Settings and press OK to enter. Then use the Arrow buttons to cycle among the following options and select the desired one to enter. 1 9 Customizing TV Settings General WIDE

Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings Use the Arrow buttons and press OK to to cycle among diff erent opt ions and s elect General to enter and adjust each option setting. Select the menu language among English, Franais or Espaol. The default on-screen menu language is English. Select to turn On/Off transparency function. Select zoom mode:

Wide/Wide Zoom/Zoom/Standard/

Just Scan(at HDMI mode)/Dot by Dot(at VGA mode). Note: With a different input source, the zoom mode options may differ. Adjust advanced options setting:

H-POS, V-POS, Clock, Phase or Auto. (only available in VGA mode) On/Off/CC on Mute. CC mode CC1, CC2, CC3, Basic CC4, TEXT1, TEXT2, Selection TEXT3, TEXT4,OFF. Service1/Service2.../

Advanced Service6/OFF. Selection Mode, Font Style, Font Size, Font Edge Style, Font Edge Color, FG_ Color, BG_ Color, FG_ Opacity, BG_Opacity. Option MENU LANGUAGE TRANSPARENCY ZOOM MODE Software Update(USB) View End-User License VGA SETTINGS Software Update(Network) Software Information CLOSED CAPTION 20 Customizing TV Settings Mode1 HDMI EDID INLINK Accessibility OFF DLC OTHER SETTINGS HDMI: Mode1/Mode2. INLINK: LINLINK CONTROL,DEVICE POWER OFF,TV Auto Power On,AUDIO RECEIVER,LINLINK DEVICE LIST,ROOT MENU. Accessibility TTSVoice Guide,VERBOSITY,RATE SUPPORT,PITCH SUPPORT,VOICE,Video Description DLC: Select to turn On/Off DLC. RESTORE DEFAULT Restore the TV to factory default SOFTWARE UPDATE (USB) VIEW END-USER LICENSE SOFTWARE UPDATE

(NETWORK) SOFTWARE INFORMATION settings. Software Update In the case of a USB device. Choose "I have read the user agreement" to select Accept or Decline . Software Update In the case of a NETWORK device. Check Module Software Version NetReady Device ID. voice guide on or How to turn the Text-to-Speech (TTS) off?

Press MENU key on the remote control

Turn the GENERAL menu.

Select OTHER SETTING

Select Accessibility

Select Voice Guide and turn it on or off. 21 Customizing TV Settings Picture Settings AUTO OPEN HDR

Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings Use the Arrow buttons and press OK to to cycle among different options and select Picture to enter and adjust each option setting. PICTURE MODE BRIGHTNESS CONTRAST COLOR SHARPNESS TINT COLOR TEMPERATURE ADVANCED OPTION OPEN HDR Cycle among picture modes:

Dynamic/Standard/Movie/User. Alternative: Press P.MODE button on remote control to set the picture mode directly. Increase or decrease the amount of white in the picture. Adjust the difference between light and dark levels in the pictures. Control the color intensity. Adjust crispness level in edges between light and dark areas of the picture. Adjust the balance between red and green levels. Cycle among color temperatures:

Normal/Warm/COOL. Set the following options:

Noise Reduction: Reduce the noise level of the connected device: OFF/

WEAK/MEDIUM/STRONG. White Balance: To set the different options of white balance. R-GAIN/G-GAIN/B-GAIN/R-OFFSET/

G-OFFSET/B-OFFSET. Backlight: To set the value of backlight. Cycle among picture modes:

OFF/AUTO/LOW/MIDDLE/HIGH . 22 Customizing TV Settings Audio Settings OFF AUTO VOLUME Network Settings NOT CONNECT

Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings Use the Arrow buttons and press OK to to cycle among different options and select Audio to enter and adjust each option setting. SOUND MODE BASS TREBLE BALANCE DIGITAL AUDIO OUTPUT SURROUND SOUND AUTO VOLUME AUDIO LANGUAGE Allow the selection of an audio-

enhancement technique: Standard/

Music/Movie/User. Control the relative intensity of lower-

pitched sounds. Control the relative intensity of higher-

pitched sounds. Adjust the relative volume of the speaker in a multiple speaker system. Select the digital audio output mode between PCM/RAW. Turn On/Off to provide an enhanced listening experience. Turn On/Off to automatically control volume levels. Select audio language among: English, French, Spanish.

Press MENU to display the main interface, use the Arrow buttons to highlight TV SETTINGS and Then Use the Arrow buttons press OK to to select NETWORK to enter and adjust each option setting. NETWORK TYPE MY NETWORK IP ADDRESS Select Wired and Wireless network, then connect the TV to the wired network or search the wireless network through searching available Display the current network which you connect to. Display the current IP information. 23 Customizing TV Settings Channel Settings

Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings. Use the Arrow buttons to cycle among different options and select Channel to enter and adjust each option setting. AIR/CABLE AUTO SCAN FAVORITE SHOW/HIDE CHANNEL NUMBER CHANNEL LABEL SIGNAL INFORMATION Select antenna between Air and Cable. Select the Auto Scan feature to scan your available Air and cable channels. Set the selected channel as a favorite channel. Show/Hide the selected channel. Display the current channel number. Display the current channel label. Display the information of current signal. 24 Customizing TV Settings Time Settings 30S NEWFOUNDLAND

Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings Use the Arrow buttons and press OK to to cycle among different options and select Time to enter and adjust each option setting. Select a period of time after which the TV automatically switches to standby mode:

Off/5/10//180/240 min. Alternative: You may press the SLEEP button repeatedly to select the number of minutes directly. Set the OSD timer:

Off/15s/30s/60s/120s/240s. Select a Time Zone:

PACIFIC/ALASKA/HAWAII/

NEWFOUNDLAND/ATLANTIC/

EASTERN/CENTRAL/MOUNTAIN. Select to turn daylight saving time On/Off. SLEEP TIMER OSD TIMER TIME ZONE DAYLIGHT SAVING TIME 25 Customizing TV Settings Lock Settings

Press MENU to display the main interface, then use the Arrow buttons to highlight TV Settings. Use the Arrow buttons to cycle among different options and select Lock to enter and adjust each option setting. Note: the default password is 0000. CHANGE PASSWORD Use 0-9 buttons to input the old password and then input the new 4-digit password. Re-enter new password for SYSTEM LOCK USA CANADA Select to turn On/Off system lock. The following options (USA, Canada, RRT Setting and Reset RRT) will only be accessible when you turn the system lock on. TV MPAA Canada English Canada French TV RATING: Press OK button to lock or unlock TV rating. Select MPAA rating : N/A,G, PG, PG-13, R, NC-17,or X. Select MPAA rating for English-speaking Canada

: E, C, C8+, G, PG, 14+, 18+. Select MPAA rating for Quebec Canada : E, G, 8 ans+, 13 ans+, 16 ans+, 18 ans+. RRT SETTING RESET RRT CLEAR LOCK Set Rating Region Table. Select to reset the RRT setting. Clear all lock settings. 26 Customizing TV Settings APP Settings

Press MENU to display the main interface, then use Arrows to highlight TV Settings. Use Arrows to cycle among different options and select App Settings to enter and adjust each option setting. and clear the account Deactivate information. Deactivate Vudu and clear the account information. Electronic Serial Number. Show Version Exception while opening/reading file. 4.3.4.eab833d.2017072610.2017-08-23 NETFLIX VERSION DEACTIVATE APP DEACTIVATE APP ESN NETFLIX VERSION 27 Customizing TV Settings Motion Picture Association of America (MPAA) Rating System G PG PG-13 R NC-17 X No Rating Grade General Audiences Parental Guidance Suggested Parents Strongly Cautioned Restricted No children under age 17 Hard Core Films No Rating Meaning Content not offensive to most viewers. Content is such that parents may not want their children to view the program. Program is inappropriate for pre-teens, with a greater degree of offensive material suggested than a PG rated program. Not for children under 17, strong element of sex and/or violence. Not f or children under 17 under any circumstances. Strong sexual content. Same as NC-17 rating. MPAA Not Rated TV Parental Guideline Rating System TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA Grade All Children Directed to Older Children General Audience Parental Guidance Suggested Parents Strongly Cautioned Mature Audience Only Meaning Content not offensive to most viewers. Considered suitable for children over 7, may contain fantasy violence scenes. Considered suitable for all audience; children may watch unattended. Suggested unsuitable for younger children, may c ontain suggestive lang uage, bad language, sex and violence scenes. unsuitable for children under 14, may contain strong language, bad language, sex and violence scenes. Adults only, may contain strong language, bad language, sex and violence scenes. Canadian Rating:

Canadian English is used throughout all English-speaking Canada (C, C8+,G, PG,14+, 18+).

Canadian French is used in Quebec (G,8 ans+, 13 ans+,16 ans+, 18 ans+). The V-Chip will automatically block certain categories that are "more restrictive".If y ou block TV-Y category,then TV-Y7 will be automatically blocked. Similarly,if you block TV-G category, then allthe categories in the

"young adult" will be blocked (TV-G, TV-PG,TV-14,and TV-MA). 28 UHD LED 55 Diagonal 16:9 480p/720p/1080i/1080p/2160p 3840x2160 200 4000:1 178 178 16.7M 150 W 2 x 8W Weight (may vary 10%)

+_ 28 lbs 49.2 (W) x 28.7 (H) x 3.7 (D) Composite Video Y Pb Pr HDMI CABLE-ANTENNA Optical Earphone USB RJ45 VGA PC AUDIO 3 2 29 Troubleshooting Symptom Cannot receive certain channels through the antenna No color Video noise or choppy picture TV blocked on certain channels Cannot use certain functions No sound Black box on screen No power No picture Remote control does not function Possible Solutions

Perform Channel Scan to add channels into the TV tuner memory. See page 24.

Readjust your antenna and retry Auto Channel Scan.

Signal from the TV station may be weak in your area.

Check the video installation of your external A / V equipment. See pages 12.

Readjust antenna. Keep TV away from noise sources, neon lights, and microwave appliances.

Perform Channel Scan to add channels into the TV tuner memory. See page 14.

Check whether the channel was deleted. See page 3.

Check parental control settings. See page 26.

Restore default settings. See page 20.

If the item chosen in a menu is shown in gray text, that item cannot be selected in the current input.

Check that connected audio cables are completely inserted. See page 23.

Mute function may be enabled, press mute on the remote.

The Text option is enabled and no text is available.

Press the CCD button on the remote control to turn off.

Batteries in the remote control may need replacing.

Re-attach AC plug to wall outlet.

Digital TV channel signal maybe weak, try another channel.

Press INPUT button to verify the desired input selected.

Re-connect the antenna or cable wiring.

Restore default settings. See page 20.

Replace batteries with new ones.

Check that battery polarity is correct.

Point remote directly at the TVs IR receiver. See page 10. 30