Bluetooth 3.0 Mouse Kits Users Manual
* FCC:
Radiation Exposure Statement:
TThe product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference; and
This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturers instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help. WARNING: Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. CE Statement of Compliance with EU Directive
*
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. This device is a 2.4 GHz wideband transmission system (transceiver) intended for use in all EU member states and EFTA countries. Operating / Storage temperature: 0C ~ +40C / -40C ~ +65C. Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Dclaration dexposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible. Industry Canada Statement This device complies with RSS-210 of Industry Canada rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage recu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. IMPORTANT BATTERY INFORMATION Keep batteries out of reach of children. Insert the batteries in the proper direction as indicated by the positive (+) and negative (-) markings in the battery compartment. Do not mix old and new batteries or batteries of different types (for example, carbon and alkaline batteries). Always remove old, weak, or worn-out batteries promptly and recycle or proper disposal of them in accordance with Local and National Disposal Regulations. If a battery leaks, remove all batteries and recycle or dispose of them in accordance with the battery manufacture's instructions and Local and National Disposal Regulations. Before inserting new batteries, thoroughly clean the compartment with a damp paper towel, or follow the battery manufacture's recommendations for cleanup. If fluid from the battery comes into contact with skin or clothes, flush skin with water immediately. Remove the batteries if your device is to be stored for an extended period of time without being used. PRODUCT DISPOSAL INFORMATION Dispose of this product in accordance with Local and National Disposal Regulations.
~ English ~
Bluetooth 3.0 Mouse Kits Users Manual PRODUCT SPECIFICATION 1. Power requirement: 3V 2. Battery : 2 pieces of AAA Batteries 3. Battery life time : 200 hours reference (operating mode) 4. Operation distance : 10M without signal disturbance and no direction limit. 5. Mouse resolution : 1000 DPI 6. System OS support: Windows 2000/XP/Vista/Windows 7 / Windows 8 7. Operating temperature : 0C ~ +40C 8. Storage temperature : -40C ~ +65C Getting Started Bluetooth 3.0 Preparing mouse and receiver Before working with your new mouse, look at the "Hardware Installation", and take a few one-time preparations. Hardware Installation Do not place the receiver on metal surfaces. Do not move optical mouse on following surface - Glass or any transparent materials Dark surface Mirror or reflecting surface Mouse pad with too many colors Rough surface. Step 1: Insert batteries Inserting batteries in mouse The mouse requires two alkaline AAA batteries. Remove the battery compartment cover on the bottom of the mouse First push the battery puller in then insert two AAA batteries into battery compartment. Fix the battery compartment cover on the bottom of mouse again. Step 2: Switch power key to turn on mouse Step 3: To push connect button in pairing mode Turn on Bluetooth for one second and release, the Bluetooth LED starts blinking, and select Bluetooth Mouse on tablet PC. CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to instructions. Refer to "Important Battery Information" for disposal instructions. Cleaning the mouse Use disinfectant wipes to clean the mouse. Do not use any dissolvent, which may damage the surface of your mouse. Troubleshooting and tips The mouse does not operate following installation or is not recognized. Make sure that the batteries have been inserted correctly according to the polarity and the receiver is well connected. Make sure the batteries are not too weak. Remove the batteries from the device. Please press any button on the device several times to prevent any unexpected failure after batteries being put in. To determine whether the mouse or computer causes the problem,test the mouse on another computer if possible;
or test another mouse on your current computer. If you are still unable to solve the problem, please contact your point of sale or your dealer. If you need to exchange the mouse, please note that you must return it to your dealer in its original packaging and also a produce proof of purchase (receipt). Keep your receipt in a safe place after purchase.
~ English ~