Storage Temperature Operating Humidity Storage Humidity Electrical Specifications Frequency Range
-20C~70C 10% ~85% RH non-condensing 5% ~90% RH non-condensing 2.4 GHz ISM Bands 2.412-
2.462GHz Modulation Output Power Receive Sensitivity Date Rates Power Consumption 12+/-2dBm 12+/-2dBm 12+/-2dBm DBPSK, DQPSK, CCK OFDM, 16-QAM, 64-QAM 802.11b
802.11g
802.11n
802.11b -85dBM @ 8%PER 802.11g
-65dBM @ 10%PER 802.11n
802.11bMAX 11Mbps 802.11gMAX 54Mbps 802.11nMAX 150Mbps USB 5.0V 1.35W Max current 270mA Indoor:~150M ,Open Space:~300M
-62dBM @ 10%PER Operating Range
*The transmission speed may vary Security Operating System Compatibility Regulatory according to the environment WEP 64/128,WPA,WPA2,TKIP,AES,WAPI WindowsXP32/64,2000,Windows7,Vista 32/64, Linux,Android,Macintosh CE, FCC, RoHS 4.Product Picture 6 5 4 3 2 1 5.PiN Assignment LED-
GND USB D+
USB D-
5V LED+
Pin No. Definition Basic Description 1 2 3 4 5 6 Note:
"U15A-U" contains channels of 1-11 and does not have region type Output Input/Output Input/Output Input Output LED signal Ground Usb signal Usb signal 5V LED signal power supply selection option. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary for successful communication. Conformment la rglementation d'Industrie Canada, le prsent metteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou infrieur) approuv pour l'metteur par Industrie Canada. Dans le but de rduire les risques de brouillage radiolectrique l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonne quivalente
(p.i.r.e.) ne dpasse pas l'intensit ncessaire l'tablissement d'une communication satisfaisante. MPE Reminding To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. Les antennes installes doivent tre situes de facon ce que la population ne puisse y tre expose une distance de moin de 20 cm. Installer les antennes de facon ce que le personnel ne puisse approcher 20 cm ou moins de la position centrale de l'
antenne. La FCC des ltats-unis stipule que cet appareil doit tre en tout temps loign d'au moins 20 cm des personnes pendant son functionnement. Information for the OEM Integrators This device is intended for OEM integrators only. Please see the full grant of equipment document for restrictions. Label Information to the End User by the OEM or Integrators If the FCC ID of this module is not visible when it is installed inside another device, then the outside of the device into which the module is installed must be label with
"Contains FCC ID: YLZ-U15A and IC: 9088A- U15A".