X403 iJoy Beach Bomb Bluetooth Speaker User Manual

2 1 0 m m Microphone LED Red/Blue ON/OFF Previous Track Next Track Decrease Volume Increase Volume Play/Answer/Call/End Call Features and Specifications Main Device Parameters Output Power: 3W*2 Frequency Response: 120Hz-16kHz RMS: (THD=10%) Driver: 1.5"*2 Power Supply: USB, DC 5V 500mA Distortion: <0.5%

S/N: >65dB Battery Capacity: 2000mAh Battery Play Time: 3.5 4 hours Battery Charging Time: 4 4.5 hours Package Contents 1. 2. 3. 4. Speaker User Manual USB to Micro-USB Cable 3.5mm Audio Cable Plug the micro-USB cable into the port of the speaker. Charging the Speaker Before using the speaker for the first time charge it for at least 24 hours. 1. Plug the opposite USB end into the USB port of a computer or compatible AC wall adapter. 2. 3. When the battery is low, approximately 4-4.5 hours of charging time is necessary to recharge the battery. The red LED turns on to indicate that the unit is charging. Once fully charged, the red LED turns off. Pairing the Device 1. 2. 3. 4. 5. Place speaker within 30ft of the Bluetooth-enabled device. Slide the ON/OFF button to ON. The blue LED flashes 3 times slowly, then flashes quickly to indicate Bluetooth pairing mode. Follow the instructions of your device to search for the speaker. The speaker is called "IJOY BEACH BOMB " If a PIN is required, enter "0000."

The blue LED flashes slowly when pairing is complete. Basic instructions To turn the speaker on, press and hold 2-3 seconds the ON/OFF button to ON. The speaker beeps and a blue LED flashes slowly. The blue LED stays on when playing music. To turn speaker off, press and hold 2-3 seconds the ON/OFF button to OFF. LED indicator Charging: Red LED on Fully Charged: Red LED off Pairing Mode: Blue LED flashes quickly Connected: Blue LED on Playing: Blue LED flashes slowly Safety information To reduce the risk of electric shock, do not attempt to disassemble the device. Do not use this product in an aircraft or in a hospital. Do not expose the device to direct sunlight, heat or flame. The device may become warm while charging. Caution operate this equipment. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter. Last song: Press quickly for last song. Next song: Press quickly for next track. Volume down: Press quickly to decrease the volume. Volume up: Press quickly to increase volume. Play/Pause/ Phone Answer and Redial Key Speaker button functions 1. Power On/Off Press and hold 2-3 seconds the ON/OFF buttonthe unit ON/OFF 2. 3. 4. 5. 6. When playing music, press the button to pause or play. Press and hold to unpair the current device. When you receive a call, press the button to answer. When the call ends, music will resume playing. Long press 3 seconds to enter the Bluetooth automatic pairing 7. 8. 9. 10. 11. RESET To reset the unit, press Reset button. 3.5mm audio input (line-in) Micro USB: Use a computer USB port/AC power adapter with USB LED Red/Blue Microphone Model Number : IJOY-BEACH-B User Guide Made in China 285mm This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help.