FCC ID: 2AO23-QIC344 Wireless Charging Pad

wireless charging pad front back charge stand charge alignment charge pad charge indicator charge indicator usb-c port 5.8 in quick tips Alignment matters - centering the device on the plus icons on the charging surface ensures the fastest and most efficient charge Thick phone cases as well as some materials can interfere with the ability to charge This is a high speed wireless charger, make the most of the charger by using the USB-C cable and power delivery wall plug that were packaged with it; using a different power source may charge your device at a slower speed included Wireless charger USB-C to USB-C charging cable Power delivery wall plug indicators Both charging indicators have the following light functions:

Solid Red - Charging your device Solid White - Fully charged Flashing Red - Foreign object detection, pieces of metal or other materials may cause overheating and damage your charger, phone, or earbud case; remove them immediately charging Place the charger on a sturdy flat surface Plug the wall plug into an outlet and the USB-C cable into the wall plug and charger If you need to use a different power source make sure it is a USB power supply of DC 9V 3A minimum warning: please use UL compliant power supply Place your QI-enabled device onto the wireless charger and align the device with the center of the charging surface or the device will not charge Remove credit cards or any card with a magnetic strip to prevent damage to the cards before charging The charging stand allows for wireless charging up to 15W, use this area for items that can draw more than 5W Remove the phone from the charging stand before changing the orientation of the phone Charge time will vary by device troubleshooting If youre having issues charging use the tips below to help:

When properly aligned the light on the charger will turn red If the device is not aligned the indicator light will not turn on Does not charge Apple Watch Double check that the USB-C cable and power delivery wall plug are plugged in Certain phone cases may interfere with wireless charging; remove the phone case for best results Double check the placement of the device on the wireless charger; for best results, the center of the device should be on the center of the wireless charger Wireless charging is compatible with iPhone 8 and newer as well as other QI-enabled devices, please consult your devices user manual if you are unsure if your device is compatible When using the charge pad, the device may still charge when not properly centered; as long as the indicator light is red, your device is charging If the indicator light flashes red while switching the phone orientation on the charging stand, remove the phone and recenter it in its new position need some help?

Cant get it to charge? Just have a question?

call us at: 877-698-4883 or: 877-MyTgtTech e-mail us at: TargetTechSupport.com safety Remove credit cards and other cards with magnetic strips to prevent damage to the cards Keep the charger away from heat and direct sunlight Do not modify or repair this device Do not use in high temperatures or extreme weather Do not use chemical detergents to clean your device, use a soft dry cloth Immediately unplug it from its power source if it gets wet FCC ID: 2AO23-QIC344 Model: QIC344 Input: 9V 3A, 12V 2.5A charging stand ouput: 15W Max output (wireless pad): 5W Max Made in Vietnam This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Target Corp. Mpls. MN, 55403 Phone: 612-304-6073

o,|!' iI CL OY a i) APNE Wy i} NUM WAYYAY wit 91 OZ O OF OS 09 OL 08 OG QHLOF 0% OF Ov OS ry QL V

202 0 ov os 09 o 08 06 00bos oz oF oy Os 09 OL 08 gs Woy oF lulalloalollonlnstvnlinlunluiunvudnduduadouduadysy Model: QIC344 Input: 9V == 3A, 12V == 2.54 Output (Wireless Charging Stand): 15W Max Output (Wireless Charging Pad): 5W. Max FCC ID: 2A023-QIC344 q Made in Vietnam =MMYY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Chug, Inc. 2022.06.10 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Clients signature:

Clients name / title : Michael Clemmer / general manager Contact information / address: 7157 Shady Oak Road Eden Prairie, Washington, Minnesota, United States, 55344

Chug, Inc. 2022.06.10 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Wireless Charging Pad Trademark: N/A MODEL : QIC344 FCC ID : 2AO23-QIC344 To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the

- Block Diagram

- Schematics

- Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Clients signature:

Clients name / title : Michael Clemmer / general manager Contact information / address: 7157 Shady Oak Road Eden Prairie, Washington, Minnesota, United States, 55344