CL-3108 USER'S MANUAL Congratulation for buying our high quality product. It is necessary to read through the manual carefully to find out all features and how to operate this cordless phone. Before first Use Please read IMPORTANT SAFET Y INSTRUCTIONS on pages 25~26before use. Accessories Take out from box: cordless handset, belt clip and base unit, in addition each carton contains the following accessories:
AC Adapter (One) Telephone line cord (One) Do not overload wall outlets and extension cords as this will result in 9. the risk of fire or electric shock. Never introduce objects into this unit through the slots as this may 10. risk in fire or electric shock hazard. Never spill any liquid on the unit. 11. To reduce the risk of electric shock, do not disassemble this unit, instead take it to a qualified service station for checking . Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect repair jobs can be highly dangerous. 12. Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A. When the power supply cord or plug is damaged. B. If liquid has been spilled over the unit. C. If the unit has been exposed to rain or water. D. If the unit does not work normally upon following the instruction. Adjust only controls covered by the operating instructions, to avoid expensive repairs by qualified technicians. E. If the unit has been dropped or damaged. F. If the unit exhibits a distinct change in performance. 13. Avoid using the phones during a lightning storm. There may be a remote risk of electric shock from lightning. User's Manual (One) CL-3108 USER'S MANUAL Batteries (Three) 14. Do not use the phones to report a gas leak nearby. 1 B EFORE SING U 26 I MPORTANT AFETY NSTRUCTIONS S I Important safety instructions Battery Charge When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock a nd injury to persons, including following items:
To power the handset, install the battery and charge it for about 24 hours before initial use. Operating Distance/Noise 1. Please understand all instructions in the operation manual. 2. Follow all warnings and instructions marked on this unit. Calls are transmitted between the base unit and the handset using wireless radio waves. To find out max distance and limit of noise free operation, you have to follow these rules:
3. Unplug this unit from wall outlets and telephone jacks before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for the job. 4. Do not use this unit near water, for example, near a bath tub, wash bowl, kitchen sink. If the unit comes in contact with any liquid, cut the power and unplug cords immediately. Do not reconnect the unit before totally dried. Put this unit securely on a stable surface. Serious damage may result 5. from falling. 6. Do not cover slots and openings of the unit, they are needed for ventilation and protection against overheating. Never place the unit near hot places where proper ventilation is not provided. 7. Use only the battery and adapter of the same type we offer. Do not place objects on the power cord. Put the unit where no one 8. can step on the cord. 25 I MPORTANT AFETY NSTRUCTIONS S I Keep away from electrical appliances, such as a T V, PC or another cordless phone. In a HIGH and CENTRAL location stay away from obstructions such as walls. 2 B EFORE SING U Features 1. FSK standard Caller ID 2. Stores up 72 calling numbers with the date and time 3. Stores up to 60 numbers in phone book 4. Line transfer between handsets 5. Out of area/Private/Repeat/Error 6. Deletes single or all records 7. LCD display calling and dialling number 8. Auto-scan channel 9. 24 digits pre-enters dial digit with edit function 10. Page on base unit to look for the handset easily 11. Memory dial function 12. Compander circuit for noise reduction 13. LCD display indicates: operation mode, dial digits, real time and memory dial digits 14. Last number redial 15. Multi-handset compatibility, up to 3 handsets 16. Ringer volume selection (on/off) on handset 17. Receiver volume and tone adjustment on handset 18. LCD contrast selection 19. Ringer volume selection on base 20. Flash and vibration function on handset 21. LCD back light 22. Wall mounting If you hear noise or static during a phone conversation The T V or VCR picture becomes distorted while talking Interference and noise on line Move closer to the base unit. Keep the base unit away from PCS, family videos, game and fax machines. Press the "CH." key to switch to another channel. Remove the base unit as far away from the TV or VCR as needed. from T V, VCR, Move away c o m p u t e r s , f a x m a c h i n e s , electronic equipment and other motor device. If the LOW BATTERY indicator is on display The battery needs recharge. If the battery is recharging Never touch the battery contacts on the base unit and handset with sweaty or the battery contacts may result in charging failure. If this has happened, clean them with Cleaned cloth or swab. 3 B EFORE SING U 24 TROUBLESHOOTING Troubleshooting If you experience trouble with your unit, please check following items before calling for help. Problem Cause & Remedy The unit does not work AC adapter unplugged or main power failure. Location of Controls Base Unit In Use Indicator Charge Indicator Charge Pins If you hear two beeps when trying to use the phone If the phone does not ring with an incoming call is out of The handset is located beyond the range of the base Unit. Or the handset registration. Place the handset On the base cradle. Move closer to the base unit or replace the handset on the base cradle. Try again a few seconds later. Make sure the telephone line cord is connected firmly to the base unit and the telephone jack. Make sure the AC adapter is plugged into an outlet and the wall switch is on. Your phone may be too far away from the base unit. Move closer to the base unit. You may have too many extension phones on your telephone line to allow all of Try unplugging some of the other phones. them to ring. Page button Telephone line jack Adapter socket Ringer volume switch (HI/MI
/LO/OFF) Shaker socket 23 TROUBLESHOOTING 4 B EFORE SING U Handset Deleting a single Caller ID number s t 1. Press and new numbers.(
or ALL XX NEW XX
) button, the LCD shows the total number of CID numbers 2. Press s t or button to find out the number you want to delete. 3. Press button twice to delete the number. F Call ID on call waiting When you have subscribed to call waiting service from your local telephone company, this telephone can indicate the name and number of the second caller while you are having a conversation with the first caller. You can press can press this button once more to continue the first conversation. button to answer the 2nd caller. After the call, you F Visual ringer F button MEMO button LCD R/P button SEL button CH button button button button Microphone Charge pins 5 B EFORE SING U 22 C ALLER ID O PERATION Press button to dial the number ahead with the 1 digit. 1 TALK Press button to dial the last 7 digits of the number. 7 TALK Press button to dial the last 8 digits of the number. 8 TALK Deleting all Caller ID numbers Belt clip Receiver volume and tone select switch Receiver volume switch Receiver tone switch Amplify button Shaking switch s t 1. Press numbers and new numbers.(
or ALL XX NEW XX
) button, the LCD shows the total number of Caller ID 2. Press button twice to delete all of the Caller ID numbers. F 21 C ALLER ID O PERATION 6 B EFORE SING U Installation Base unit Connect the telephone line and the power. Caller ID Operation Reviewing the Caller ID list s t 1. Press numbers and new numbers.(
or ALL XX NEW XX
) button, the LCD shows the total number of Caller ID Single-Line Telephone Jack Telephone Line Cord Handset Install and remove the belt clip 2. Press s t or button to review the other caller numbers. Dialling the Caller ID numbers AC Adapter During the reviewing mode, press showed on the LCD. button to dialled out the number If the Caller ID number exceeds 8 digits, you can dial the number as above or in other 4 ways as follows.(e.g. the number is
) 34567890123 JOHN BULL Press button to dial the number with the digit. 0 0
(1) Install belt clip
(2) Remove belt clip 7 B EFORE SING U 20 C ALLER ID O PERATION TALK 2. Press button to dial it out. Install the batter y Deleting all records from phone book
(1) Slide the battery compartment cover downwards.
(2) Insert new batteries as indicated, matching correct polarity 1. In standby mode, press number of records. MEMO button, then the LCD shows the total
(3) Slide the cover up until it snaps in place. 2. Press button twice, then all of the records will be deleted. F Deleting a single record from phone book 1. Find out the record you want to delete. Please see "Reviewing names and numbers in phone book" for details. 2. Press button twice, then the record will be deleted. F 19 B ASIC UNCTION F 8 B EFORE SING U LCD Informations Description a. Press s t or button to review the records. b. Enter the caller's name, then press matching record. MEMO button to review the In standby mode: In this mode, the LCD will show the handset number, date and real time. 00: 47 01/01 HS-1 IN USE indicator:
After pressing will turn on, in use indicator on base unit and handset will be bright steadily, which indicates that the unit is in use mode. The timer will turn on after about 6 seconds. button, the TALK NEW call:
If there are new calls in memory, the After all the new calls have been reviewed, the icon will turn off. NEW icon will turn on and flash. REPEAT icon If a call comes repeatedly, the
RPT icon will turn on. Battery indicator:
If the battery is low, the battery low icon will show as
. END OF LIST This message will display when reaching the top (end) of the phone book or Caller ID list by using the button. s tor c. Enter the first character of the caller's name, then press button. The LCD shows the matching records, press get your desired record. s t or MEMO button to Modifying names and numbers in phone book 1. Find out the record you want to modify. Please see "Reviewing names and numbers in phone book" for details. SEL 2. Press number flashes. button to enter the modifying mode, the last digit of the 3. Enter the new number by keypad. If necessary, press delete the error digits. F button to 4. Press MEMO button to confirm and enter the name modification. 5. Enter the new name by keypad. If necessary, press button to delete the error characters. F 6. Press MEMO button to confirm. Dialling a number from phone book PRIVATE If the caller has exercised the option to prevent his number from being sent, it will be shown on the screen. 1. Find out the record you want to dial. Please see "Reviewing names and numbers in phone book" for details. 9 B EFORE SING U 18 B ASIC UNCTION F Phone Book Storing names and numbers to phone book You can store up to 60 names and numbers in the memory. 1. Adding names and numbers to phone book:
1. In standby mode, input the number you want to store by keypad. 2. Press MEMO button and then the LCD will show name
. 3. Enter the name by keypad. If the next character is on the same button as the previous one, you need to for about 2 seconds before entering the next character. You can press button to delete the error characters. F 4. Press MEMO button to confirm and exit. 2. Copying Caller ID numbers to phone book:
1. In standby mode, press or Caller ID number you want to add. s t button repeatedly to find out the OUT OF AREA This message will display when someone calls from an area where the telephone company is not offering the caller identification services or is not yet providing name and number delivery to your area via the long distance net work. ERROR If there are some error information in the incoming number or your telephone cannot receive the information correctly, the LCD will show ERROR. This does not mean that there is something wrong with your phone. MESSAGE WAITING If you have voice mail service from your telephone company and a recorded message is left, the will turn on and flash. You can press button twice to delete the icon. NOTE: This function should be supported by your local telephone company. MESSAGE
F 2. If the number with caller's name, press number without caller's name, press name. After that, press MEMO button again to store. MEMO button to store. If the button, then enter the MEMO Reviewing names and numbers in phone book In standby mode, press number of records. Then there are 3 ways to review the records:
MEMO button, then the LCD shows the total 17 B ASIC UNCTION F 10 Before Using Handset Settings Handset registration 1. Make sure the base unit is connected into the AC outlet and line jack. button on the base unit. After 3 seconds, 2. Press and hold the the unit will give you a press the confirmation beep, which means that the code has been set and the handset will show button on the handset, on the LCD. HS -1 CH 3. If you have a second handset need to be registered to the same button on the handset until you get a beep and base, press the the display shows
. Continue the same procedure, if you have a third handset. If not, release the button from the base unit. HS -2 CH The NOTE:
during the whole procedure. button on the base unit should be kept pressing The base unit and the handset have been set IMPORTANT NOTICE:
code already. Settings Out of range warning In talk mode, if the handset is too far away from base unit, an out of range warning tone will be heard. The user should move closer to the base unit. If not, the handset will automatically return to standby mode after about 20 seconds. When the handset makes a noise, press but-
ton to return to standby mode. Line transfer If extra handsets are set to the base unit:
1. During a phone conversation, press button and handset number. The line will be hold and make music sounds to the other end, both the two handsets will ring. SEL 2. The other handset can press automatically after receiving the transfer ring. button to answer the call 3. Press not want to answer the call during the transfer ring. button to cancel the transfer if the other handset user does 4. If the two handsets do not respond within 40 seconds, the line will be disconnected automatically. In standby mode, press PROGRAM to indicate you enter the setting mode. SEL button once, then the LCD will show Paging 1. Press the button to page the handset. 2. Press button once more to cancel the paging operation. 3. If you do not press 25 seconds then end the paging automatically. button again, the handset will ring for about 11 B EFORE SING U 16 B ASIC UNCTION F Last number redial LCD contrast setting Press button, then press R/P button to redial the last dialled number. CH button During the conversation, the phone will scan the clear channel automatically. If you still hear noise or static, press the button to find a clearer channel. NOTE:
It takes about 2 seconds for the unit to scan a channel. CH Pause function This function allows you to insert a temporary pause during dialling sequence. For example, dialling an international number (e.g. 011-886-
22-795-1234), some telephone company systems will not register the entire number entry without a pause between the prefix numbers. You may have to dial 011-
. This allows adequate timing for the phone number to register with the telephone company's system and complete the call.
, dial 886 -
R/P R/P Keys confirmation tone Every time you press a key, your handset acknowledges it with a key tone. Battery low warning and shut down protection Once the battery voltage is low, the low battery icon will turn on. The low battery warning tone will also be generated if the handset is in talk mode. You can press button to return to standby mode, then replace it on the base to recharge. SEL Press adj X(X=1,2,3,4) button, then 2 button, and then the current level will show on the LCD. Press s t or contrast button to get the desired level and press SEL button once more to confirm and exit. Ringer setting SEL button, then 3 button, and then the current mode Press ON/OFF will show on the LCD. Press s activate/deactivate the ringer function. Press to confirm and exit. SEL Time setting RING or button to button once more t SEL button, then Press 4 the LCD and the digit for get the desired digit then press next item (the sequence is setting, press SEL button, and then the MONTH will flash. Press SET TIME will show on button to button to confirm and enter the
). After the s t MONTH-DAY-HOUR-MINUTE SEL or button to confirm and exit. Receiver volume and tone setting You can increase the volume and adjust the receiver tone according to your own hearing requirements. The receiver volume and tone switch within the battery compartment allows extra-receiver select and tone function to be activated or not during the conversation. If you move the switch to up position, the amplify function will be activated and the LED indicator will lit up, you can adjust the receiver tone and receiver volume button to get the desired volume level. receiver volume and tone select 15 B ASIC UNCTION F 12 B EFORE SING U volume and tone receiver select NOTE:
1.If you move the switch up, the amplify function are automatically activated each time you use the phone. If you want to deactivate the function temporarily, press the amplify 2.If you turn the switch down, the amplify function are automatically deactivated each time you use the phone, you will need to activate the function temporarily by pressing the amplify button. button once, at the same time, the LED turns off. volume and tone receiver select Basic Function To make a call 1. Press button and wait for a dial tone. 2. Dial the telephone number. Vibration function You can move the is receiving, the handset will shake. To turn off this function, just move the switch to up position, when a call switch to down position. shaking shaking 3. During a call, you can press another call or switch to call waiting. F button to get a new dial tone for To receive a call To receive a call, just press button. To end a call To end a call, just press button. Pre-dialling function 1. In standby mode, dial your desired number. You can press button to delete the incorrect digits. F 2. If the phone number is correct, press you can start your conversation. button to dial it out. Then 13 H ANDSET ETTINGS S 14 H ANDSET ETTINGS S Warning:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.