Clips Neckband NB-S3 User Manual Read carefully this user manual before using CLIPS Neckband NB-S3 and follow the instruction for important safety and prevention against the damage of properties. Basic information to connect e Device ID to search the Bluetooth using Smartphone or PC ---
Applications (Android OS ON e CLIPS Message Reader
- SMS, MMS, SNS: read content of SMS (160 characters including space), title of MMS, KakaoTalk, Line, and WeChat using TTS service of users smartphone, (%* Please check more about the supported TTS engine with smartphone maker)
- CLOCK: announce time on the hour, on the half hour and on the quarter hour option
- CALLER ID READER: Caller ID notification right after user received the incoming call. e CLIPS Hotline
- Hotline: send a SOS emergency call (hotline), and/or a prepared emergency message
- VoiceWatch: announce the current time with talking clock Package Contents This product contains below. Please check the packaging contents before use. ONB-S3 pc 0 USB Charging Cable 4p 5 User Manual = ipe O Application Guide = pe ee Before Use Please charae the device before use and please use the provided charqing cable. Please DO NOT use for the other devices and it may cause the damage of the product.
(\ Caution The USB Charging Adapter in the packaging is for this product only. LED turns green when the charging is completed Charging USB Port Power / Call Button Volume -
LED Earphone cable Earphones Earphone Mode t Speaker Speaker Mode | * Music Playback / Pause HB NB-S3 Operation Table ltem Operation LED Display Push the Power/Call button for Red and blue LED Power ON approximately 2 second to turn on will turn on and off each other Push the Power/Call button for Power OFF approximately more than 3 seconds to turn LED will turn off off oe Push the Power/Call button for Red and blue LED Meah ode approximately2 seconds from the POWER will turn on and off OFF each other Pn Red and blue LED
| ae Mode Refer to the NFC pairing will turn on and off each other
(ten [ero Push the Power/Call button and Volume Control button - together for approximately more than 5 seconds from the POWER ON Volume Control Een the Volume Control button +/- shortly fF for one time Pushing on and off the Power/Call button for LED Display Pink LED will blink and turn off Pairing Reset Make a Call 1 time shortly (start dialing the last dialed number) Anewer aCall Push the Power/Call button shortly for one time when receiving a call Reject a Call Pushing on and off the Power/Call button for more than 1 second when receiving a call Ending a Call Pushing on and off the Power/Call button longly for approximately 1 second Push the Music Playback / Pause button Playing Music shortly for one time Push the Music Playback / Pause button shortly for one time Pause Music Pushing the Volume Control + button longly for approximately 2 second Previous Son Pushing the Volume Control - button longly 3 | for approximately 2 second Pushing on and off the Music Playback /
Ending Music Pause button longly for approximately 2 second Next Song Select the switch to Earphone Mode
(backside) Earphone Mode Select the switch to Speaker Mode
(frontside) Speaker Mode NFC Auto- Pairing ll NFC Auto-Pairing works only for the NFC enabled smartphones
> NFC sensor area: the backside of NB-S3, and the back cover side of the smartphone 1. Activate the NFC from NFC enabled smartphone 2. Contact the both NFC area of the NB-S3 and NFC enabled smartphone together and Pair the Bluetooth device NB-S3?
3. It shows Paring ~, Connecting ~, and Connected to ~ on the screen
(approximately 3 seconds), and NB-S3 also comments as Connected 4. After NFC auto-paired, it will connect and disconnect if both are contacted on the NFC sensor area.
%* Caution The NFC sensor area must be different from smartphone makers and it is required to check the sensor area on the cover part to be matched with it on the NB-S3 Manual Pairing (initial registering the device)
[Initially the pairing mode was set as factory setting for this device]
Every Bluetooth enabled devices requires to have the pairing procedure, which requires PIN number or auto pairing for their firs time use. Please refer to the quick start guide for the pairing with smartphones. 4 | Setting with pairing mode for the product (NB-S3) Push the Power/Call button for more than 2 seconds from the status of Power-off. LED indicator will blinks crossing red and green together so as to turn in the pairing mode. LED OFF LED ON Red Blue cross blinking
(Power Off) = (Red after Blue) => (Pairing Mode)
+ It will automatically pairs with already paired device. For more details, please check the user manual of the smartphones or contact smartphone manufacturer. a Searching the product from device before connecting Searching the product from paired device. The way to searching might be different from each devices. Please refer to the Quick Start Guide or user manual of each devices. El Registering the product from the device before connecting The product (NB-S3) will shows on the Bluetooth device from Smartphone or PC, then select and register it. LED indicator will turn to green with slow blinking, then it completes the pairing. After that, it will connects automatically. Red <> Blue cross blinking Blue indicator blinking slowly
(on the pairing) =p (pairing completed) Basic Operatin
= Power ON (Voice Prompt: power on) Push the Power/Call button long approximately 2 second from the power-off, then LED indicator will turn to Red after Blue to power ON. If it does have the paired device around the product, it will try to connect automatically. If the connection completed, the LED indicator will turns into Blue so as to ready to use. If the pairing would be released, the Red LED will keep blinking.
= Power OFF (Voice Prompt: power off) Push the Power/Call button approximately 3 seconds from the power-on, then LED indicator will turn to Red after Blue and turn off the LED indicator to power OFF. Automatic Power-Off If the communication discontinues between device and product such as the power- ai of the Sue or discontinuing of the Pairing after Powel on, the Red LED indicator will turn on and slowly power would be turned-off. :
aa Make a call using smartphones Please talk close to the microphone if the sound of receiving part would be weak. S The Geis might be different for the product depends on the specification of
: = Gineuphones: :
= Receiving a Call (Voice Prompt: connecting) When a call comes to Smartphone, the product start vibrating and LED indicator blinks as Blue. Push Power/
Call button shortly for one time. Please select the earphone-speaker mode upon your convenience.
+ Vibration cannot be OFF
= Ending a Call Push on and off the Power/Call button for 1 second while communication.
= Last Call Redial Push on and off the Power/Call button long enough for 1 second.
= Voice Call Push the Power/Call button shortly for one time (Voice Call enabled phone ONLY)
= Control Volume The Volume Control button can control using volume +/-. Please adjust volume of the smartphone if you cannot get enough sound volume with the product. eee Music Playback Playing the Music : Push the Music Playback button shortly at once after music selected from smartphone. Pause the Music : Push the Music Playback button shortly at once while playing music Ending the Music : Push the Music Playback button longly for 2 second Select next song(FF): Push the Volume + button long for 2 second Select previous song (REW) : Push the Volume - button long for 2 second
* Same operation in both of earphone and speaker mode
*& NB-S3 supports apt-X codec, which is highly optimized for Hi-
Fi audio in Bluetooth Technology. ed Multi-Pairing 1
. First device pairing 1) Pair the NB-S3 with first device (smartphone preferred) with pairing mode (NFC or manual pairing) 2) Turn-off the Bluetooth of the smartphone after the first device is completely paired
. Second device pairing 1) Pair the NB-S3 with second device (smartphone, tablet, PC, or Mac) with pairing mode
(NFC or manual pairing) 2) Activate the Bluetooth (turn-on) from first device after the second device is completely paired and connected, then select the NB-S3 from the paired device list on the first smartphone
. Then, two devices are connected with NB-S3 NB-S3 will connect with both devices automatically every time when the power is on. When connected with two phones, some phones might not be work. Please contact the manufacturer. Beare Speaker Phone
= If you select the earphone-speaker mode switch as the speaker phone mode to use as the handsfree call using speaker phone Caution:
1. Please adjust the volume not to disturb other people while make or receiving a call 2. Please adjust the volume if you can hear the echo sound eee Change Mode Mode Switch enables to change between earphone and speaker mode Oo ) __ (Cry Earphone Mode Speaker Mode Battery Charging Plug the USB charging adapter, which is in the packaging contents into the charging port Plug the USB part of the USB charing adapter into USB AC adapter or USB port of the PC Green LED will be turned off when charging completed Basic Specification Product | NB-S3 Bluetooth Standard V4.0 Frequencies 2.402MHz ~ 2.480MHz Supported Bluetooth Profiles | HSP, HPP, A2DP, AVRCP Audio Codec Transmitting Distance Continuous Talking Time High Quality Audio apt-X supported Earphones: Max 20 hours with volume middle (5 of 10) Music Playback Speakers: Max 7 hours with volume middle (5 of 10) Temperature Operating Humidity 0 ~ 80% (without frozen) Environment Conditions
-10 ~ 50C Temperature Storage Humidity 0 ~ 80% (without frozen) Input Voltage DC 5V Battery Type Dimension Lithium Polymer 141mm x 158mm Approx. 38g
* The appearance and specification could be changed without prior notice for the improvement of the product.
+1. It is the ideal distance since the wireless transmit distance could be different from the different Bluetooth transmission device and environmental circumstances.
+2. Using time could be different from the different using conditions such as long distance between Product and Bluetooth device, and the different volume adjustment, which affects the power consumption of the product. WARNINGS and CAUTIONS A WARNINGS!
@ Do not disassemble and/or modify this product. It may cause a failure and/or a fire hazard.
@ Do not use the headset at high volume for an extended period of time. Doing so can cause hearing loss. Always listen at moderate levels.
@ Operate this product within the temperature range of -10 C to 60 C (14 F to 140 F) only. Damage caused by use outside of that range may not be covered by the warranty.
@ Do not look at the laser beam directly.
@ Do not point the laster beam to the people.
@ Do not expose this product to the wet places, liquids, and/or flame sources. It may cause a failure and/or a fire hazard. EN CAUTIONS!
@ Do not impact or drop this product. It may cause a failure or damage.
@ Do not clean this product with alcohol, benzene, and solvent.
@ Do not listen to the musing using headphones (earphones) and/or operate this product while driving or walking since it may cause the traffic accident.
@ Check and follow local laws regarding use of mobile phone and headset/headphones
(earphones) while operating any vehicle or using equipment that requires your full attention. If you use headset/headphones(earphones) while engaging any such activity, be sure to focus on safety. FCC ID : 2AB34~NB~-S3 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
+ Reorient or relocate the receiving antenna.
+ Increase the separation between the equipment and receiver.
+ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
+ Consult the dealer or an experienced radio/TV technician for help. Modifications not expressly approved by the manufacturer could void the user's authority to operated the equipment under FCC rules. This Device has been evaluated to comply with RF exposure requirement for general use limit in portable condition. It is safe to be used in sold condition.