FCC ID: M3NA2C786860 LF Transmitter

The device under test is manufactured by the grantee (Continental Automotive Systems, Inc.), and sold as an OEM product. Per 47 CFR 2.909, 2.927, 2.931, 2.1033, etc, the grantee must ensure the end-user has all applicable / appropriate operating instructions. When end-

user instructions are required, as in the case of this product, the grantee must notify the OEM to notify the end-user. Continental Automotive Systems, Inc. will supply this document to the reseller/distributor dictating what must be included in the end users manual for the commercial product. INFORMATION TO BE INCLUDED IN THE END USERS MANUAL The following information (in blue) must be included in the end-product users manual to ensure continued FCC and Industry Canada regulatory compliance. The ID numbers must be included in the manual if the device label is not readily accessible to the end user. The compliance paragraphs below must be included in the user's manual.

FCC ID: M3NA2C786860 IC: 7812A-M3NA2C786860 This device complies with Part 15 of the FCC Rules and with ISED Canada license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d'ISDE Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NINGS Yq 13!

1V'1 OS IB98L-

ICVNE MR M 1 inental ensstrasse 12 65 Regensbu Tay 786860 C: PEP JK) |S

= 920:

Gem IC: 78124-A2C CXXXXXXXXNA sna nn ee

=e p) oseoe/ De 45 Ps Type / FCC ID:

R-R-TAL-A2C7E mone i Ade erence, ce that may vqapayui j injuuzey 4 pug AOD SIU)

NINGS Yq 14 1V'1 OS ee S9IBL~

JCVNE IN YIN Aue INngsuabapy Ge 7 | SSseuSsual

|EWSuUL IC: 78124-A2C CXXXXXXXXKKN and wil A we con ept any in W45 p4 Type / FCC ID:

R-R-TAL-A2C?

ice that may 1aapayui injures Je Due if si4]

Cell 4q@AT AYU ee io}

SEL LOCA

V7 YANO LSNd 3.

To Whom It May Concern:

Authority to Act as Agent and REL Listing We appoint Joseph D. Brunett on behalf of Willow Run Test Labs, Inc. and Amber Helm Development, LC and Bradley J. Koski on behalf of Wireless Approval Consultants to act as our agent(s) in the preparation of this application for equipment certification and/or EU/UKCA Notified Body type examination. We certify that submitted documents properly describe the device or system for which equipment certification is sought. We also certify that each unit manufactured, imported or marketed (as defined in Industry Canadas regulations) will have affixed to it a label identical to that submitted for approval with this application. Further, in accordance with section 6.5 of IC CB-02, we hereby acknowledge that our companys product cannot be distributed, leased or offered for sale in Canada until its listed on the Industry Canada Radio Equipment List (REL). For instances where our authorized agent signs the application for certification on our behalf, we acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by American Certification Body, Inc. and/or TUV Rheinland Group and/or Vista Laboratories, Inc. still resides with Continental Automotive Systems, Inc. For TCB applications, we certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) regarding certified equipment. Dated:

14 January 2022 By:

(Signature) Mark Kenney Title:

Homologation Engineer for the Americas E-mail:

Mark.Kenney@continental-corporation.com On behalf of: Continental Automotive Systems, Inc. 1 Continental Drive Auburn Hills, Michigan, 48326 United States of America Telephone:

+1 248 764 6758

Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Re: Certification for Continental Automotive FCC ID: M3NA2C786860 IC: 7812A-A2C786860 REQUEST FOR CONFIDENTIALITY Pursuant to USA FCC 47 CFR 0.457(d) and 0.459 and Canada IC RSP-100, Section 10, Continental Automotive requests that a part of the subject application be held confidential. Continental Automotive has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to competition would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Exhibit Exh 04 - Block Diagram Exh 05 - Schematics Exh 10 - BOM + Placement Exh 12 - Oper. Description Conf. Type Rational Permanent Permanent Permanent Permanent Includes proprietary internal oscillator information. Includes proprietary design information Includes proprietary design information Includes proprietary design information Long Term Confidentiality (Permanent): Continental Automotive requests that any exhibits listed above as permanently confidential be permanently withheld from public review. Wherein Long Term Confidentiality is not an option for specific exhibits with ISED, this request applies only to the FCC application for those exhibits. Short-Term Confidentiality (FCC Only): Continental Automotive requests that any exhibits selected above as short term confidential be withheld from public view for a period of days (noted above) from the date of the Grant of Equipment Authorization and prior to marketing. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 9

Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Attn.:Certification and Engineering Bureau, Innovation, Science and Economic Development Canada 3701 Carling Avenue, Bldg. 94 Ottawa, Ontario K2H 8S2 Re: Certification for Continental Automotive M3NA2C786860 IC: 7812A-A2C786860 If necessary, we have enclosed application materials for certification of Continental Automotive M3NA2C786860. It has been verified to comply with ISED RSS-210v10/GENv5. Current Variants:

There are two principle variants of the EUT, PEPS5 and PEPS6. The PEPS5 variant employs two (2) door-handle mounted antenna coils (PN: DH-ANTENNA) and three (3) vehicle chassis mounted, long range antenna coils (PN:

LR-ANTENNA). The PEPS6 variant employs only five (5) of the same vehicle chassis mounted antenna coils (PN:

LR-ANTENNA). The tuning employed for the door-handle coils is different than that of the chassis mounted coils, which is the only RF difference between the PEPS5 and PEPS6 variants. Minor differences in digital component populations also exist. The DH-ANTENNA has different overmolded plastic shapes for insertion into door handle assemblies however the antenna is the same. The PEPS5 variant was fully tested and emissions from the PEPS6 variant was confirmed to be the same as those measured from the PEPS5. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 11 Willow Run (WR) Test Labs, Inc. 7117 Fieldcrest Dr., Brighton, Michigan 48116 USA Tel: (734) 252-9785, Fax: (734) 926-9785, e-mail: info@wrtest.com Attn.:Federal Communications Commission Equipment Approval Services P.O. Box 358315 Pittsburgh, PA 15251-5315 Re: Certification for Continental Automotive M3NA2C786860 FCC ID: M3NA2C786860 If necessary, we have enclosed application materials for certification of Continental Automotive M3NA2C786860. It has been verified to comply with CFR Title 47, Part 15.209. Current Variants:

There are two principle variants of the EUT, PEPS5 and PEPS6. The PEPS5 variant employs two (2) door-handle mounted antenna coils (PN: DH-ANTENNA) and three (3) vehicle chassis mounted, long range antenna coils (PN:

LR-ANTENNA). The PEPS6 variant employs only five (5) of the same vehicle chassis mounted antenna coils (PN:

LR-ANTENNA). The tuning employed for the door-handle coils is different than that of the chassis mounted coils, which is the only RF difference between the PEPS5 and PEPS6 variants. Minor differences in digital component populations also exist. The DH-ANTENNA has different overmolded plastic shapes for insertion into door handle assemblies however the antenna is the same. The PEPS5 variant was fully tested and emissions from the PEPS6 variant was confirmed to be the same as those measured from the PEPS5. If there are any questions regarding the application or testing performed, please contact us at the above address or call (734) 252-9785, or e-mail info@wrtest.com. Sincerely, Joseph D. Brunett Willow Run (WR) Test Labs, Inc. 10

To Whom It May Concern:

Statement for 47 CFR section 2.911(d)(5)(i) Continental Automotive Systems, Inc. certifies that as of the date of the application the equipment for which authorization is sought is not covered equipment1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not covered equipment. Additional Explanation: <N/A>

Statement for 47 CFR section 2.911(d)(5)(ii) Continental Automotive Systems, Inc. (the applicant) certifies that, as of the date of the filing of this application, the applicant is not identified on the Covered List as an entity producing covered equipment. Dated:

2 October 2023 By:

(Signature) Mark Kenney Title:

Homologation Engineer for the Americas E-mail:

Mark.Kenney@continental-corporation.com On behalf of: Continental Automotive Systems, Inc. 1 Continental Drive Auburn Hills, Michigan, 48326 United States of America Telephone:

+1 248 393 5300 1 - The Commissions Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commissions website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes covered equipment. https://www.fcc.gov/supplychain/coveredlist .

ATTENTION: FCC Certification Section 2.911(d)(7) Information Applicant and Designated U.S. Agent Continental Automotive Systems, Inc. M3N Company Name:

Grantee Code:

FCC Registration Number: 0022069249 Mark Kenney Contact Name:

1 Continental Drive Street Address:

Auburn Hills, Michigan, 48326, United States of America City, State, Zip, Country:

+1 248 393 5300 Telephone Number:

Mark.Kenney@continental-corporation.com E-mail:

This letter is to confirm that we (designate[d] agent located in the United States) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted above. The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Dated:

2 October 2023 By:

(Signature) Mark Kenney Title:

Homologation Engineer for the Americas E-mail:

Mark.Kenney@continental-corporation.com On behalf of: Continental Automotive Systems, Inc. 1 Continental Drive Auburn Hills, Michigan, 48326 United States of America Telephone:

+1 248 393 5300