RF-BTSS01_12-0875_QSG_V2_EN.ai 1 8/20/2012 9:48:08 AM RF-BTSS01_12-0875_QSG_V2_EN.ai 1 8/20/2012 9:48:08 AM Bluetooth Speaker Stand RF-BTSS01 This speaker stand is a Bluetooth stereo speaker system with an AUX in feature. It can be operated with the rechargeable battery, or with the included AC power adapter. AUX input is prioritized whenever a 3.5 mm cable is plugged in. Package contents Speaker stand Stereo audio cable Removeable tablet support AC power adapter Quick Setup Guide Features Top Volume down Volume up ON/OFF/PAIRING LED indicator Button Rear Removeable tablet support QUICK SETUP GUIDE Aux input jack DC power jack Using your Bluetooth stereo speaker stand First time pairing (with a new device) 1 Make sure that the speaker stand is fully charged or power adapter is plugged in. 2 Press and hold the ON/OFF/Pairing button for approximately eight seconds until the LED flashes blue and red alternately (in pairing mode). 3 Turn on the Bluetooth on your other Bluetooth device (e.g., tablet, mobile phone or MP3 player), then search for device name RF-BTSS01 and choose to connect. The LED indicator will turn blue after successfully connecting. The speaker is ready to play audio from the connected device. Auto playback (auto pairing with the same device) 1 Make sure that the speaker stand is fully charged or power adapter is plugged in. 2 Make sure that the same Bluetooth device is switched on. 3 Turn on the speaker by pressing the on/off/pairing button (make sure that any cables connected to the AUX in jack are unplugged). 4 The speaker stand automatically searches for the devices that paired with it last time. When the same device is found, it will automatically pair again and be ready to play audio from the connected device. RF-BTSS01_12-0875_QSG_V2_EN.ai 2 8/20/2012 9:48:16 AM RF-BTSS01_12-0875_QSG_V2_EN.ai 2 8/20/2012 9:48:16 AM AUX in playback 1 Make sure that the speaker stand is fully charged or the power adapter is plugged in. 2 Turn on the speaker by pressing the on/off/pairing button. 3 Connect one end of the stereo audio cable to your source device, and the other end to the Aux input jack on the back of the speaker. 4 Begin playback on the input source device. Smartphone Tablet MP3 Player Connection to source Stereo audio cable (included) Charging Plug the AC adapter into a power outlet and the power plug into the DC power jack of the speaker stand. Whenever the power adapter is plugged in, it starts the charging process and the LED indicator turns red. The red LED indicator will turn off when the internal battery is fully charged. It takes 3.5 hours to fully charge the battery. Power outlet FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ICES-003 This Class B digital apparatus complies with Canadian ICES-003; Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. IC Manual requirement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RSS-102 Statement This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment. Dclaration CNR-102: Cet quipement est conforme l'exposition aux rayonnements Industry Canada limites tablies pour un environnement non contrl. One-year limited warranty Visit www.rocketfishproducts.com for details. Contact Rocketfish:
For customer service, call 1-800-620-2790 www.rocketfishproducts.com 2012 BBY Solutions, Inc. All Rights Reserved. Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645 ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners. ENGLISH 12-0875