all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual 1 | Users Manual | 5.34 MiB | December 12 2016 / November 06 2017 | |||
1 |
|
User Manual 2 | Users Manual | 5.27 MiB | December 12 2016 / November 06 2017 | |||
1 | External Photos | December 12 2016 / November 06 2017 | ||||||
1 | Internal Photos | December 12 2016 / November 06 2017 | ||||||
1 | Internal Photos | December 12 2016 / November 06 2017 | ||||||
1 | Internal Photos | December 12 2016 / November 06 2017 | ||||||
1 | ID Label/Location Info | December 12 2016 | ||||||
1 | ID Label/Location Info | December 12 2016 | ||||||
1 | Cover Letter(s) | December 12 2016 | ||||||
1 | RF Exposure Info | December 12 2016 | ||||||
1 | Cover Letter(s) | December 12 2016 | ||||||
1 | Test Report | December 12 2016 | ||||||
1 | Test Setup Photos | December 12 2016 / November 06 2017 |
1 | User Manual 1 | Users Manual | 5.34 MiB | December 12 2016 / November 06 2017 |
Version 1.00 | 12/02/2016 User Manual 4G LTE Router DWR-922 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision 1.00 Date Description December 02, 2016 Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright 2016 by D-Link Corporation. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation. D-Link DWR-922 User Manual i Table of Contents Product Overview ..............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 1 Introduction ................................................................................... 2 Hardware Overview ..................................................................... 3 Front View ................................................................................ 3 Back View ................................................................................. 4 Installation .........................................................................5 Before You Begin ........................................................................... 5 Wireless Installation Considerations ...................................... 6 Configuration .....................................................................7 Getting Started .............................................................................. 7 Internet ............................................................................................. 8 WAN Service ........................................................................... 8 Dynamic IP (DHCP) .......................................................... 8 Static IP ..............................................................................10 PPPoE (Username / Password) ..................................11 PPTP ....................................................................................13 L2TP ....................................................................................15 4G LTE / 3G .......................................................................17 Wizard .....................................................................................19 Multi-WAN .............................................................................23 Multi-WAN Configuration ................................................24 4G LTE / 3G failover........................................................24 Static IP Address Failover ............................................25 Dynamic IP Failover .......................................................26 PPPoE Failover .................................................................27 IPv6 ..........................................................................................28 Link-local Only ................................................................28 Static IPv6 .........................................................................29 Autoconfiguration (SLAAC/DHCPv6) ......................30 PPPoE .................................................................................31 PPPoE .................................................................................32 Wi-Fi .................................................................................................33 Device List .............................................................................33 Wi-Fi Settings .......................................................................33 WPS ..........................................................................................35 Wi-Fi Advanced ....................................................................37 LAN ..................................................................................................39 Device List .............................................................................39 LAN Settings .........................................................................39 DHCP .......................................................................................40 Advanced ......................................................................................41 DNS ..........................................................................................41 Applications ..........................................................................42 DMZ .........................................................................................43 Virtual Server ........................................................................44 URL Filter ................................................................................45 Routing ...................................................................................46 QoS...........................................................................................47 MAC Address Filter .............................................................48 D-Link DWR-922 User Manual ii Table of Contents Outbound Filter ...................................................................49 Inbound Filter ......................................................................50 SNMP .......................................................................................51 Advanced Network ............................................................52 Network Scan .......................................................................53 System ............................................................................................54 Time Settings .......................................................................54 Administration .....................................................................55 Reboot & Reset ....................................................................56 Firmware Upgrade ..............................................................57 System Logs ..........................................................................58 Schedules ..............................................................................59 Add New Rule ..................................................................59 Connection Reset ...............................................................60 Troubleshooting ..............................................................79 Wireless Basics .................................................................83 What is Wireless? .........................................................................84 Tips ...................................................................................................86 Wireless Modes ............................................................................87 Networking Basics ...........................................................88 Check your IP address ...............................................................88 Statically Assign an IP address ...............................................89 Wireless Security ............................................................90 What is WPA? ...................................................................90 Technical Specifications ..................................................91 Regulatory Information ..................................................92 Connect a Wireless Client to your Router ......................61 WPS Button ...................................................................................61 Windows 10 ................................................................................62 Windows 8 ...................................................................................64 WPA/WPA2 ............................................................................64 Windows 7 ...................................................................................66 WPA/WPA2 ............................................................................66 WPS ..........................................................................................69 Windows Vista ............................................................................73 WPA/WPA2 ............................................................................74 Windows XP ................................................................................76 WPA/WPA2 ............................................................................77 D-Link DWR-922 User Manual iii Table of Contents Product Overview Package Contents DWR-922 4G LTE Router with Presinstalled SIM/UICC Power Adapter 3G/4G Antennas RJ-45 Cable If any of the above items are missing, please contact your reseller. System Requirements A compatible SIM/UICC card with service.*
Computer with Windows 10/8/7/Vista/XP, Mac OS 10.3 or above, or Linux-based operating system with a compatible network adapter. Java-enabled browser such as Internet Explorer 9, Safari 7, Chrome 28, or Firefox 23 or above
(for configuration).
* Subject to services and service terms available from your carrier. D-Link DWR-922 User Manual 1 Section 1 - Product Overview Introduction D-Links DWR-922 4G LTE Router allows you to access mobile broadband networks from anywhere. Once connected, you can check e-mail, surf the web, and stream media. Use your carriers SIM/UICC card to share your 3G/4G Internet connection through a secure wireless network or by using any of the four 10/100 Ethernet ports. The DWR-922 lets you connect to your 3G/4G mobile connection with fast downlink speeds of up to 100 Mbps and uplink speeds up to 50 Mbps, giving you the speed to ensure fast, responsive Internet access. Surf the web with ease and stream music and video over the Internet to your PCs and mobile devices. The DWR-922 utilizes dual-active firewalls (SPI and NAT) to prevent potential attacks across the Internet. Industry standard WPA/WPA2 wireless encryption keeps your wireless network secure and your traffic safe, allowing you to share your 3G/4G connection without worrying about unauthorized users accessing your network. The DWR-922 can be installed quickly and easily almost anywhere. It can be configured through almost any web browser without the need for special software. This router makes it possible to stay connected, even when conventional broadband services are unavailable. D-Link DWR-922 User Manual 2 Section 1 - Product Overview Hardware Overview Front View 1 2 3 4 5 6 7 8 1 2 3 Reset Button Press this button with an unfolded paperclip and hold for ten seconds to reset the device. LAN LED Power LED Will be lit if an Ethernet connection is established, and will blink when data is being transferred. Will be lit if the device is powered on and working. 4 WPS Button Press this button to initiate a new WPS connection. See WPS Button on page 61 for details. 5 6 7 Signal Strength LED Will blink red if there is no SIM card or no signal. Solid red, amber, or green indicates the signal strength. 2G/3G LED 4G LED Will be lit if a 2G or 3G connection is established, and will blink when data is being transferred. Will be lit if a 4G LTE connection is established, and will blink when data is being transferred. 8 WLAN LED Will be lit if the wireless function is enabled, and will blink when wireless data is being transferred. D-Link DWR-922 User Manual 3 Section 1 - Product Overview Back View 1 2 3 4 5 1 2 3 4 5 Ethernet LAN Ports For connection to a network-enabled desktop or notebook computer. Ethernet WAN Port For connection to a DSL/cable modem or router. SIM Card Slot Accepts a standard mini-SIM/UICC card for 3G/4G LTE connectivity. Power Connector Connects to the included power adapter. Power Button Turns the device on or off. D-Link DWR-922 User Manual 4 Section 1 - Product Overview Installation This section will guide you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in an attic or garage. Before You Begin Ensure that your DWR-922 4G LTE Router is disconnected and powered off before performing the steps below.. 1. Verify that your SIM/UICC card is installed and has been activated by your carrier. Caution: Always unplug/power down the router before installing or removing the SIM/UICC card. Never insert or remove the SIM/UICC card while the router is in use. 2. Attach the included antennas to the back of the router, screwing them in clockwise. Arrange them so that they point upward. 3. Connect the power adapter to the socket on the back panel of your DWR-922. Plug the other end of the power adapter into a wall outlet or power strip. Make sure the power button is in the On position. a. The Power LED will light up to indicate that power is being supplied to the router and the router is turned on. b. The LEDs on the front panel will flash on and off as the DWR-922 Mobile Router performs initialization and Internet connection processes. c. After a few moments, if a connection has been established, the following LEDs will turn solid green: Power, Signal Strength, WLAN, LAN (if connected), and either 2G/3G or 4G. Note: By default, the DWR-922 uses the mobile network as the sole Internet connection. If you wish to use your mobile connection as a backup to a wired connection, or you wish to use a wired connection exclusively, you must use the Optional Advanced Setup procedure. 4. Connect via Wi-Fi using the SSID and password printed on the bottom of the router, or through Ethernet via one of the LAN ports on the back of your DWR-922. D-Link DWR-922 User Manual 5 Section 2 - Installation Wireless Installation Considerations The DWR-922 can be accessed using a wireless connection from anywhere within the operating range of your wireless network. Keep in mind that the quantity, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range of the wireless signal. Ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or office. The key to maximizing the wireless range is to follow these basic guidelines:
1. Minimize the number of walls and ceilings between the D-Link router and other network devices. Each wall or ceiling can reduce your adapters range from 3 to 90 feet (1 to 30 meters). 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet
(1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick. Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Try to position access points, wireless routers, and computers so that the signal passes through open doorways and drywall. Materials such as glass, metal, brick, insulation, concrete, and water can affect wireless performance. Large objects such as fish tanks, mirrors, file cabinets, metal doors, and aluminum studs may also have a negative effect on range. 4. If you are using 2.4 GHz cordless phones, make sure that the 2.4 GHz phone base is as far away from your wireless device as possible. The base transmits a signal even if the phone is not in use. In some cases, cordless phones, X-10 wireless devices, and electronic equipment such as ceiling fans, fluorescent lights, and home security systems may dramatically degrade wireless connectivity. D-Link DWR-922 User Manual 6 Section 2 - Installation Configuration Getting Started To access the configuration utility, open a web browser such as Internet Explorer and enter the address of the router (192.168.0.1 by default). To log in to the configuration utility, admin is the default username and the default password is left blank. Note: If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. Once you have successfully logged in, you will see the Home page. On this page you can view information about your Internet connection, the wireless/LAN status, and system information. At the top of the page is a menu. Clicking on one of these icons will take you to the appropriate configuration section. D-Link DWR-922 User Manual 7 Section 4 - Configuration Internet WAN Service On this page you can configure your Internet connection. If you are not sure which settings to use, please contact your Internet Service Provider
(ISP). My Internet Connection is:
Select the Internet connection type specified by your ISP. The corresponding settings will be displayed below. Please see the following sections for details on how to configure these different connection types. Dynamic IP (DHCP) Host Name:
If your ISP requires you to enter a host name, enter it here. In most cases, you may leave this blank. Primary DNS Server:
Secondary DNS Server:
(Optional) Fill in with IP address of primary DNS server.
(Optional) Fill in with IP address of secondary DNS server. MTU:
You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default value is 0. MAC Address:
The default MAC address is set to the WAN ports physical interface MAC address on the router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone button to replace the WAN ports MAC address with the MAC address of your PC. D-Link DWR-922 User Manual 8 Section 4 - Configuration Reconnect Mode:
This feature enables this product to renew the WAN IP address automatically when the lease time has expired. NAT disable:
Enabling this option will disable the NAT firewall function of the DWR-922, exposing all connected devices directly to the Internet. This is an advanced feature and not recommended for normal use. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 9 Section 4 - Configuration IP Address:
Enter the IP address assigned to your network connection. Static IP Subnet Mask:
Enter the subnet mask. Default Gateway:
Primary DNS Server:
Secondary DNS Server:
Enter the default gateway. Enter the primary DNS server. Enter the secondary DNS server. MTU:
You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default value is 0. MAC Address:
The default MAC address is set to the WAN ports physical interface MAC address on the router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone button to replace the WAN ports MAC address with the MAC address of your PC. NAT disable:
Enabling this option will disable the NAT firewall function of the DWR-922, exposing all connected devices directly to the Internet. This is an advanced feature and not recommended for normal use. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 10 Section 4 - Configuration PPPoE (Username / Password) Username:
The username provided by your ISP for your PPPoE account. Password:
Password provided by your ISP for your PPPoE account. Verify Password:
Re-type your password in this field. Service Name:
Fill in if provided by your ISP. (Optional) IP Address:
Fill in if provided by your ISP. If not, keep the default value. Primary DNS Server:
Fill in if provided by your ISP. If not, keep the default value
(optional). Secondary DNS Server:
Fill in if provided by your ISP. If not, keep the default value
(optional). MAC Address:
The default MAC address is set to the WAN ports physical interface MAC address on the router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone button to replace the WAN ports MAC address with the MAC address of your PC. Maximum Idle Time:
The amount of time of inactivity before disconnecting an established PPPoE session. Set it to zero or enable auto-reconnect to disable this feature. MTU:
You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default value is 0. Reconnect Mode:
Choose Always-on when you want to establish PPTP connection all the time. If you choose Connect-on-demand, the device will establish a PPTP connection when local users want to connect to the Internet, and disconnect if there is no traffic after the time period defined by the Maximum Idle Time setting. D-Link DWR-922 User Manual 11 Section 4 - Configuration NAT disable: Enabling this option will disable the NAT firewall function of the DWR-922, exposing all connected devices directly to the Internet. This is an advanced feature and not recommended for normal use. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 12 Section 4 - Configuration PPTP Address Mode:
Choose Static IP only if your ISP provides you with a static IP address for PPTP. Otherwise, please choose Dynamic IP. PPTP IP Address:
Enter the information provided by your ISP (Only applicable for Static IP PPTP). PPTP Subnet Mask:
Enter the information provided by your ISP (Only applicable for Static IP PPTP). PPTP Gateway IP Address:
Enter the information provided by your ISP (Only applicable for Static IP PPTP). PPTP Server IP Address:
IP address of the PPTP server. Username:
User/account name that your ISP provides to you for PPTP dial-up. Password:
Password that your ISP provides to you for PPTP dial-up. Verify Password:
Re-enter your password for verification. Reconnect Mode:
Choose Always-on when you want to establish PPTP connection all the time. If you choose Connect-on-demand, the device will establish a PPTP connection when local users want to connect to the Internet, and disconnect if there is no traffic after the time period defined by the Maximum Idle Time setting. Maximum Idle Time:
The time of no activity to disconnect your PPTP session. Set it to zero or choose Always-on to disable this feature. D-Link DWR-922 User Manual 13 Section 4 - Configuration NAT disable:
Enabling this option will disable the NAT firewall function of the DWR-922, exposing all connected devices directly to the Internet. This is an advanced feature and not recommended for normal use. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 14 Section 4 - Configuration L2TP Address Mode:
Choose Static IP only if your ISP assigns you an IP address. Otherwise, please choose Dynamic IP. L2TP IP Address:
Enter the information provided by your ISP (Only applicable for Static IP L2TP). L2TP Subnet Mask:
Enter the information provided by your ISP (Only applicable for Static IP L2TP). L2TP Gateway IP Address:
Enter the information provided by your ISP (Only applicable for Static IP L2TP). L2TP Server IP Address:
IP address of the L2TP server. Username:
User/account name that your ISP provides to you for L2TP dial-up. Password:
Password that your ISP provides to you for L2TP dial-up. Verify Password:
Re-type your password in this field. Reconnect Mode:
Choose Always-on when you want to establish L2TP connection all the time. If you choose Connect-on-demand the device will establish L2TP connection when local users want to use Internet, and disconnect if no traffic after time period of Maximum Idle Time. Maximum Idle Time:
The time of no activity to disconnect your L2TP session. Set it to 0 or choose Always-on to disable this feature. D-Link DWR-922 User Manual 15 Section 4 - Configuration NAT disable:
Enabling this option will disable the NAT firewall function of the DWR-922, exposing all connected devices directly to the Internet. This is an advanced feature and not recommended for normal use. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 16 Section 4 - Configuration 4G LTE / 3G Prefer Service Type:
Choose whether the DWR-922 should only use 4G networks, 3G networks, or use Auto Mode to automatically select a network. Username:
Fill in only if requested by carrier ISP (optional). Password:
Fill in only if requested by carrier (optional). Verify Password:
Re-type your password in this field (optional). Dialed Number:
If your carrier provides a dial-in number or code, enter it here. Empty by default. Authentication:
Select PAP, CHAP, or Auto detection. The default authentication method is Auto. APN:
Enter the APN information (optional). Pin Code:
If your SIM card has a PIN code, enter it here Reconnect Mode:
Select Auto, Manual, or Connect-on-deman to determine whether the router should reconnect to your 3G/4G network automatically or manually. Maximum Idle Time:
Set the maximum time your connection can be idle before disconnecting. Set it to 0 or choose Auto in Reconnect Mode to disable this feature. Roaming:
Enabling this option will allow you to connect when roaming away from your carriers home network. Note: Roaming connections may incur additional fees from your service provider. D-Link DWR-922 User Manual 17 Section 4 - Configuration Bridge Ethernet Ports:
Activate this feature to use the Ethernet WAN port as an additional LAN port. NAT disable:
Enabling this option will disable the NAT function of the DWR-922, allowing it to act as a link for your devices to your Internet connection, but without routing functions. Transparent Bridge:
Enabling the Transparent Bridge function disables the routing/
NAT functions and passes the public WAN IP address given by your service provider directly through to the local client or PC. This can only be used if a single IP address has been assigned by your ISP. If transparent bridge is enabled, the above NAT Disable option will not be available. Radio Frequency:
Turns the cellular radio on or off. This setting is intended to disable the cellular radio for areas where radio transmissions may be restricted. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 18 Section 4 - Configuration Wizard This wizard will guide you through a step-by-step process to configure your router to connect to the Internet. Click Next to continue. Note: While using the wizard, you can click Prev to go back to the previous step, or you can click Cancel to close the wizard. Select the Internet connection type you use. The connection types are explained on the following page. If you are unsure which connection type you should use, contact your Internet Service Provider (ISP). Click Prev to go back to the previous page or click Cancel to close the wizard. Note: The DWR-922 has a Multi-WAN Failover feature that allows the router to switch to a 3G/4G connection if the WAN connection is down or unavailable. To configure this feature, please refer to Multi-WAN Configuration on page 24. D-Link DWR-922 User Manual 19 Section 4 - Configuration The subsequent configuration pages will differ depending on the selection you make on this page. DHCP Connection
(Dynamic IP Address):
Choose this if your IPS automatically provides you with an IP address. Most cable modems use this type of connection. See Dynamic IP (DHCP) on page 8 for information about how to configure this type of connection. Username
/ Password Connection
(PPPoE):
Choose this option if your Internet connection requires a username and password to connect. Most DSL modems use this style of connection. See PPPoE (Username / Password) on page 11 for information about how to configure this type of connection. Username
/ Password Connection (PPTP):
Choose this option if your Internet connection requires Point-
to-Point Tunneling Protocol (PPTP). See PPTP on page 13 for information about how to configure this type of connection. Username
/ Password Connection (L2TP):
Choose this option if your Internet connection requires Layer 2 Tunneling Protocol (L2TP). See L2TP on page 15 for information about how to configure this type of connection. 3G/4G Connection:
Choose this connection if you have installed a SIM card into the DWR-922. See 4G LTE / 3G on page 17 for information about how to configure this type of connection. Static IP Address Connection:
Choose this option if your Internet Service Provider (ISP) provided you with IP address information that has to be manually configured. See Static IP on page 10 for information about how to configure this type of connection. After entering the requested information,click Next to continue. Note: If you are not sure what connection type to use or what settings to enter, check with your Internet Service Provider (ISP). D-Link DWR-922 User Manual 20 Section 4 - Configuration Enter a Wireless Network Name (SSID), then click Next to continue. Choose the best security level supported by your wireless clients. Click Next to continue. Unless you chose None in the previous step, enter a security password. Clients must enter this password to connect to your wireless network. Click Next to continue. D-Link DWR-922 User Manual 21 Section 4 - Configuration Create a new admin password and then click Next to continue. Users must enter this password to enter the setup utility. Select your time zone from the drop-down box and then click Next to continue. This completes the Internet Connection Setup Wizard. Click Connect to save your changes and reboot the router. D-Link DWR-922 User Manual 22 Section 4 - Configuration The DWR-922s multi-WAN feature allows you to set your router to automatically switch to a secondary Internet connection if your primary Internet connection is lost. Note that you must first specify your primary Internet connection either on the WAN Service tab (see page 8) or the Wizard
(see Wizard on page 19) before you can specify a secondary Internet connection. By default, the primary connection is 3G/4G. Multi-WAN Failover type:
Select Failover to enable the failover function. Remote Host for Keep Alive:
This option should be set to an external IP address that can be used to ensure that the 3G/4G LTE connection will be kept from going offline due to inactivity. An example would be Googles public DNS servers (8.8.8.8 or 8.8.4.4) or your Internet service providers DNS servers. Primary WAN:
This will automatically be set to the currently configured Internet connection type. Secondary WAN:
This can be set by clicking on Add, the available options will be shown in the drop down box that appears. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 23 Section 4 - Configuration After selecting a secondary WAN and clicking apply, you will be directed to a setup screen for the relevant connection type. Multi-WAN Configuration 4G LTE / 3G failover Fill in only if requested by your ISP (optional). Username:
Password:
Fill in only if requested by you ISP (optional). Verify Password:
Retype password if required above. Dialed Number:
If your ISP provides you with a dial-in number, enter it here. Empty by default. Authentication:
Select PAP, CHAP or Auto if requested by your carrier. The default authentication method is Auto. APN:
Enter the APN (Access Point Name) for your 3G/4G connection. Reset:
Press Reset to restore your APN setting to factory default. This button leaves all other settings unchanged, including those on this page. Pin Code:
If your SIM/UICC card has a PIN, enter it here (optional). Radio Frequency:
Turns the cellular radio on or off. This setting is intended to disable the cellular radio for areas where radio transmissions may be restricted. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 24 Section 4 - Configuration IP Address:
Enter the IP address assigned to your network connection. Static IP Address Failover Subnet Mask:
Enter the subnet mark. Default Gateway:
Enter the default gateway. Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server. Enter the secondary DNS server. MTU:
You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default value is 0. MAC Address:
The default MAC address is set to the WAN ports physical interface MAC address. Changing it is not recommended unless required to do so by your ISP. You can use the Clone button to replace the WAN ports MAC address with the MAC address of your PC. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 25 Section 4 - Configuration Host Name:
If your ISP requires you to enter a host name, enter it here. In most cases, you may leave this blank. Dynamic IP Failover Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server. Enter the secondary DNS server. MTU:
You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default value is 0. MAC Address:
The default MAC address is set to the WAN ports physical interface MAC address. Changing it is not recommended unless required to do so by your ISP. You can use the Clone button to replace the WAN ports MAC address with the MAC address of your PC. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 26 Section 4 - Configuration PPPoE Failover Username:
The username provided by your ISP for your PPPoE account. Password:
The password provided by your ISP for your PPPoE account Verify Password:
Re-type your password in this field. Service Name:
Fill in if provided by your ISP (optional). IP Address:
Fill in if provided by your ISP. If not, keep the default value. Primary DNS Server:
Secondary DNS Server:
MAC Address:
Enter the primary DNS server. Enter the secondary DNS server. The default MAC address is set to the WAN ports physical interface MAC address. Changing it is not recommended unless required to do so by your ISP. You can use the Clone button to replace the WAN ports MAC address with the MAC address of your PC. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 27 Section 4 - Configuration IPv6 IPv6:
To enable IPv6, select Enable. IPv6 Connection:
Select the IPv6 connection type specified by your ISP. The corresponding settings will be displayed below. Please see the following sections for details on how to configure these different connection types. Link-local Only LAN IPv6 Link-
Local Address:
Displays the IPv6 address of the router. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 28 Section 4 - Configuration Static IPv6 IPv6 Address:
Enter the static IPv6 address of the router. Subnet Prefix Length:
Enter the subnet prefix length. Default Gateway:
Enter the default gateway address. DNS Addresses:
Enter the primary and secondary DNS server addresses. LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN IPv6 Link-
Local Address:
Enable Autoconfiguration:
Displays the routers LAN link-local address. Check to enable the autoconfiguration feature for LAN devices. Autoconfiguration Type:
Select Stateful (DHCPv6) or SLAAC + Stateless DHCPv6. This will determine the configuration type for you IPv6 LAN. If you selected Stateful (DHCPv6), enter the address range start. If you selected Stateful (DHCPv6), enter the address range end. Enter the IPv6 address lifetime (in seconds). IPv6 Address Range (Start):
IPv6 Address Range (End):
Router Advertisement Lifetime:
Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 29 Section 4 - Configuration Autoconfiguration (SLAAC/DHCPv6) DNS Setting:
Select either Obtain DNS server address automatically or Use the following DNS address. DNS Addresses:
Enter the primary and secondary DNS server addresses. Enable DHCP-PD:
Check to enable the DHCP-PD feature. LAN IPv6 Address:
If you did not enable DHCP-PD, enter the LAN (local) IPv6 address for the router. LAN IPv6 Link-
Local Address:
Enable Autoconfiguration:
Displays the routers LAN link-local address. Check to enable the autoconfiguration feature. Autoconfiguration Type:
Select Stateful (DHCPv6) or SLAAC + Stateless DHCPv6. This will determine the configuration type for you IPv6 LAN. IPv6 Address Range (Start):
IPv6 Address Range (End):
IPv6 Address Lifetime:
If you selected Stateful (DHCPv6), enter the address range start. If you selected Stateful (DHCPv6), enter the address range end. Enter the IPv6 address lifetime (in seconds). Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 30 Section 4 - Configuration PPPoE Username:
Enter your PPPoE user name. Password:
Enter your PPPoE password. Service Name:
Enter the ISP Service Name (optional). MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. DNS Setting:
Select either Obtain DNS Server address Automatically or Use the following DNS address. DNS Addresses:
Enter the primary and secondary DNS server addresses. Enable DHCP-PD:
Check to enable the DHCP-PD feature. LAN IPv6 Address:
If you did not enable DHCP-PD, enter the LAN (local) IPv6 address. LAN IPv6 Link-
Local Address:
Enable Autoconfiguration:
Displays the routers LAN link-local address. Check to enable the autoconfiguration feature. Autoconfiguration Type:
Select Stateful (DHCPv6) or SLAAC + Stateless DHCPv6. This will determine the configuration type for you IPv6 LAN. IPv6 Address Range (Start):
IPv6 Address Range (End):
If you selected Stateful (DHCPv6), enter the address range start. If you selected Stateful (DHCPv6), enter the address range end. D-Link DWR-922 User Manual 31 Section 4 - Configuration IPv6 Address Lifetime:
Enter the IPv6 address lifetime (in seconds). Click Apply to save your settings, or Refresh to revert to your previous settings. PPPoE D-Link DWR-922 User Manual 32 Section 4 - Configuration Wi-Fi Device List This page displays a list of currently-connected wireless clients, and their respective MAC addresses. This page lets you set up your wireless network and choose a wireless security mode. Click Apply to save your settings, or Refresh to revert to your previous settings. Wi-Fi Settings Enable Wireless:
Check this box to enable wireless access. When you enable this option, the following parameters take effect. Wireless Network Name:
Also known as the SSID (Service Set Identifier), this is the name of your Wireless Local Area Network (WLAN). Enter a name using up to 32 alphanumeric characters. The SSID is case-sensitive. 802.11 Mode:
Select the IEEE 802.11 standard used by your wireless clients. Enable Auto Channel Scan:
Enabling this feature will allow the router to automatically scan for the best wireless channel to use. Wireless Channel:
If Auto Channel Scan is disabled, select the desired channel here. D-Link DWR-922 User Manual 33 Section 4 - Configuration Channel Width:
A higher channel width allows for faster data transmission, at the possible expense of wireless coverage and compatibility with older wireless clients. Select the optimum channel width for your wireless network from the drop-down menu. Visibility Status:
The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. Security Mode:
Select the desired wireless encryption mode. WPA/WPA2 is recommended if your clients support it. If you choose WEP, the following options will appear:
WEP Key Length:
Select whether to use 64-bit or 128-bit encryption. Authentication:
Select whether to use Open or Shared authentication. WEP Key 1:
Set the WEP key/password for your wireless network. Based on whether you are using 64 or 128-bit encryption, and whether you are using a HEX or ASCII key, you will need to enter different numbers of characters for your key, as indicated below the WEP Key text box. ASCII keys may use letters and numbers only, and HEX keys may use numbers 0-9 and letters A-F only. If you choose WPA-Personal, the following options will appear:
WPA Mode:
Select whether to use WPA2 only or Auto (WPA or WPA2). WPA2 only is the most secure, provided that all of your clients support it. Cipher Type:
Select whether to use the TKIP or AES cipher. The AES cipher is the most secure, provided that all of your clients can support it. Pre-Shared Key:
Enter the key/password you want to use for your wireless network. The key must be between 8 and 63 characters long, and may only contain letters and numbers. D-Link DWR-922 User Manual 34 Section 4 - Configuration The Wi-Fi Protected Setup page allows you to create a wireless connection between your router and a device automatically by simply pushing a button or entering a PIN code. WPS WPS:
Select whether you would like to Enable or Disable WPS features. AP PIN:
If you use Windows 7s Connect to a network wizard to do initial configuration of the router, you will have the option to enter the WPS PIN/AP PIN into the wizard when prompted. The factory default WPS PIN/AP PIN is printed on a label located on the bottom of the router. You can click the Generate New PIN button to change it to a randomly generated PIN. Config Mode:
Select whether the WPS config mode should be set to Registrar or Enrollee. In most cases, this should be set to Registrar so that you can use WPS to connect new wireless clients. Config Status:
If this is set to CONFIGURED, the router will be marked as already configured to computers that try to use WPS configuration, such as Windows 7s Connect to a network wizard. You can click the Release button to change the status to UNCONFIGURED to allow for WPS configuration of the router. If this is set to UNCONFIGURED, you can click the Set button to change the status to CONFIGURED to block WPS configuration of the router. Disable WPS-PIN Method:
Enable this option to prevent clients from connecting to the router using the PIN method. If this option is enabled, clients must use the push-button method to connect. D-Link DWR-922 User Manual 35 Section 4 - Configuration Config Method:
This lets you choose whether to use the Push Button connection method (PBC) or PIN method to connect to a wireless client when the Trigger button is clicked. If you choose the PIN method, you will need to enter an 8-digit PIN number that the wireless client needs to use to connect to your router. WPS status:
This will show the current WPS connection process status. Click the Trigger button to initiate a WPS connection. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 36 Section 4 - Configuration This page contains settings which can negatively affect the performance of your router if configured improperly. Do not change these settings unless you are already familiar with them or have been instructed to make the change by one of our support personnel. Wi-Fi Advanced Beacon Interval:
Specify a value for the beacon interval. Beacons are packets sent by an access point to synchronize a wireless network. 100 is the default setting and is recommended. Transmit Power:
Set the transmit power of the antennas. RTS Threshold:
This value should remain at its default setting of 2347. If inconsistent data flow is a problem, only a minor modification should be made. Fragmentation:
The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the default setting. DTIM Interval:
Set the interval for DTIM. A Delivery Traffic Indication Message
(DTIM) is a countdown informing clients of the next window for listening to broadcast and multicast messages. The default interval is 1. WMM Capable:
WMM (Wi-Fi Multimedia) is a QoS (Quality of Service) system for your wireless network. Enable this option to improve the quality of video and voice applications for your wireless clients. TX Rates:
Select the basic transfer rates based on the speed of wireless adapters on your wireless network. It is strongly recommended to keep this setting to Best. D-Link DWR-922 User Manual 37 Section 4 - Configuration Short GI:
Check this box to reduce the guard interval to 400 ns. This can increase the throughput rate provided that the delay spread of the connection is also low. However, it can also increase error rate in some installations, due to increased sensitivity to radio-frequency reflections. Select the option that works best for your installation. HT 20/40 Coexistence:
Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40 MHz and there is another wireless networks channel over-lapping and causing interference, the router will automatically change to 20MHz. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 38 Section 4 - Configuration LAN This section will help you to change the local network settings of your router and to configure the DHCP Server settings. This page displays a list of currently-connected wired clients, and their respective MAC addresses. Device List LAN Settings Router IP Address:
Enter the IP address you want to use for the router. The default IP address is 192.168.0.1. If you change the IP address, you will need to enter the new IP address in your browser to get into the configuration utility. Default Subnet Mask:
Enter the subnet mask of the router. The default subnet mask is 255.255.255.0. Local Domain Name:
Enter the local domain name for your network. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 39 Section 4 - Configuration The DWR-922 has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server assigns IP addresses to devices on the network that request them. By default, the DHCP Server is enabled on the device. The DHCP address pool contains a range of IP addresses, which are automatically assigned to the clients on the network. DHCP Enable DHCP Server:
Select this box to enable the DHCP server on your router. DHCP IP Address Range:
Enter the range of IPs for the DHCP server to use to assign IP addresses to devices on your network. These values will represent the last octet of the IP addresses in the pool. DHCP Lease Time:
Enter the lease time for IP address assignments. Primary DNS IP Address:
Enter the primary DNS IP address that will be assigned to DHCP clients. Secondary DNS IP Address:
Enter the secondary DNS IP address that will be assigned to DHCP clients. DHCP Reservation:
Click DHCP Reservation to assign a dedicated IP to a specified MAC address to be saved by the DHCP server. The Fixed Mapping page will appear. Select a DHCP client and click Copy to, or enter the MAC address and IP address manually, to assign the IP address to the MAC address. Click Enable to enable the rule. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 40 Section 4 - Configuration Advanced DNS On this page you can configure the Domain Name System (DNS) server, which manages the resolution of host/domain names to IP addresses. DDNS:
Tick this checkbox to enable the DDNS feature. Provider:
Select a DDNS service provider to use. Host Name:
Enter the Host Name that you registered with your DDNS service provider. Username /
E-mail:
Enter the Username for your DDNS account. Password / Key:
Enter the Password for your DDNS account. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 41 Section 4 - Configuration Some applications require multiple connections, such as Internet gaming, video conferencing, and Internet telephony. These applications may have difficulty working through NAT (Network Address Translation). Applications allows some of these applications to work with the DWR-922 by opening ports after detecting traffic being sent through a trigger port. Applications Popular Applications:
Select from a list of popular applications. You can select a service, select a rule ID, then click the Copy to button to copy the default settings for that service to the specified rule ID. ID:
Specifies which rule to copy the selected Popular applications settings to when you click the Copy to button. APPLICATION RULES ID:
This identifies the rule. Trigger:
Enter the port to listen to in order to trigger the rule. Incoming Ports:
Specify the incoming port(s) to open when traffic comes over the Trigger port. Enable:
Check the box to enable the specified rule. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 42 Section 4 - Configuration
1 | User Manual 2 | Users Manual | 5.27 MiB | December 12 2016 / November 06 2017 |
Sometimes you may want a computer exposed to the Internet for certain types of applications. If you choose to expose a computer, you can enable Demilitarized Zone (DMZ). This option will expose the chosen computer completely to the Internet. This is not recommended for normal use. DMZ Enable SPI:
Enabling Stateful Packet Inspection (SPI) helps to prevent cyber attacks by validating that the traffic passing through the session conforms to the protocol. Enable DMZ:
If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer. DMZ IP Address:
Note: Placing a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. If this computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the LAN > DHCP > DHCP Reservervation page so that the IP address of the DMZ machine does not change. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 43 Section 4 - Configuration The device can be configured as a virtual server so that users can access services such as Web or FTP via the public (WAN) IP address of the router. You can also allow the settings to run on a specified schedule. Virtual Server Well-known Services:
ID:
Use schedule rule:
This contains a list of pre-defined services. You can select a service, select a rule ID, then click the Copy to button to copy the default settings for that service to the specified rule ID. Specifies which rule to copy the selected Well known service settings to when you click the Copy to button. Select a schedule to use and copy to the specified rule ID when you click the Copy to button. You may select Always On or use a specific schedule that you have defined. To create and edit schedules, please refer to Schedules on page 59. VIRTUAL SERVERS LIST ID:
This identifies the rule. Service Ports Enter the public port(s) you want to open. Server IP: Port:
Enter the IP address and port of the computer on your local network that you want to forward the Service Ports to. Enable:
Check the box to enable the specified rule. Schedule Rule #:
Specify the schedule rule number. To create schedules, click on the Add New Rule button. For further information on schedules, please refer to Schedules on page 59. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 44 Section 4 - Configuration URL Filter allows you to set up a list of websites that will be blocked from users on your network. URL Filter URL Filtering:
Check the box to enable URL Filtering. URL FILTERING RULES This identifies the rule. ID:
URL:
Enter URL that you would like to block. All URLs that begin with this address will be blocked. Enable:
Check the box to enable the specified rule. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 45 Section 4 - Configuration The Routing page allows you to specify custom routes that determine how data is moved around your network. Routing RIP:
Check the box to enable routing, then select which routing protocol to use:
RIPv1: Protocol in which the IP address is routed through the Internet. RIPv2: Enhanced version of RIPv1 with added features such as authentication, routing domain, next hop forwarding, and subnet-mask exchange. ROUTING RULES ID:
This identifies the rule. Destination:
Subnet Mask:
Enter in the IP of the specified network that you want to access using the static route. Enter in the subnet mask to be used for the specified network. Gateway:
Enter in the gateway IP address for the specified network. Hop:
Enter in the amount of hops it will take to reach the specified network. Enable:
Note: In a transmission path, each link is terminated at a network device such as a router or gateway. The number of hops equals the number of routers or gateways that data must pass through before reaching the destination. Select this box to enable the rule. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 46 Section 4 - Configuration The QoS Engine improves your online gaming or streaming media experience by ensuring that your game or media traffic is prioritized over other network traffic, such as FTP or web. QoS Enable QOS Packet Filter:
Upstream Bandwidth:
Use Schedule Rule:
Select this box to enable the QoS feature. Specify the maximum upstream bandwidth here (e.g. 400 Kbps). Select a schedule to use and copy to the specified rule ID when you click the Copy to button. You may select Always On or use a specific schedule that you have defined. To create and edit schedules, please refer to Schedules on page 59. QOS RULES This identifies the rule. ID:
Local IP : Ports:
Specify the local IP address(es) and port(s) for the rule to affect. Remote IP : Ports:
Specify the remote IP address(es) and port(s) for the rule to affect. QoS Priority:
Select what priority level to use for traffic affected by the rule:
Low, Normal, or High. Enable:
Use Rule #:
Check the box to enable the specified rule. Specify the schedule rule number. To create a new schedule, click on the Add New Rule button. For more information about schedules, please refer to Schedules on page 59. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 47 Section 4 - Configuration MAC Address Filter The MAC (Media Access Controller) Address Filter option is used to control network access based on the MAC address of the network adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be configured to ALLOW or DENY network/
Internet access. MAC Address Control:
Check this box to enable MAC Filtering. Connection Control:
Check the box to allow wireless and wired clients with C selected to connect to this device. You can also select to allow or deny connections from unspecified MAC addresses. Association Control:
Check the box to allow wireless clients with A selected can associate to the wireless LAN. You can also select to allow or deny connections from unspecified MAC addresses. MAC FILTERING RULES ID:
This identifies the rule. MAC Address:
IP Address:
Specify the MAC address of the computer to be filtered. Specify the last section of the IP address. C:
A:
If this box is ticked, the rule will follow the connection control setting specified in MAC filtering settings specified above. If this box is ticked, the rule will follow the association control setting specified in MAC filtering settings specified above. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 48 Section 4 - Configuration Outbound Filter enables you to control what packets are allowed to be sent out to the Internet. The outbound filter applies to all outbound packets. Outbound Filter Outbound Filter:
Select this box to Enable outbound filtering. Use Schedule Rule:
Select a schedule to use and copy to the specified rule ID when you click the Copy to button. You may select Always On or use a specific schedule that you have defined. To create and edit schedules, please refer to Schedules on page 59. OUTBOUND FILTER RULES LIST Here, you can select whether to Allow or Deny all outgoing traffic except for traffic that matches the listed rules. This identifies the rule. Specify the local IP address and then specify the port after the colon. Specify the remote IP address and then the port after the colon. ID:
Source IP : Ports:
Destination IP :
Ports:
Enable:
Check the box to enable the specified rule. Schedule Rule #:
Specify the schedule rule number. Click on the Add New Rule button to create a new schedule rule. Previous Page:
Go back to the previous filter page. Next Page:
Advance to the next filter page. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 49 Section 4 - Configuration Inbound Filter enables you to control what packets are allowed to come in to your network from the Internet. The inbound filter only applies to packets that are destined for Virtual Servers or DMZ hosts. Inbound Filter Inbound Filter:
Select this box to Enable the filter. Use Schedule Rule:
Select a schedule to use and copy to the specified rule ID when you click the Copy to button. You may select Always On or use a specific schedule that you have defined. To create and edit schedules, please refer to Schedules on page 59. INBOUND FILTER RULES LIST Here, you can select whether to Allow or Deny all incoming traffic except for traffic that matches the listed rules. ID:
This identifies the rule. Source IP : Ports:
Specify the local IP address and then specify the port after the colon. Destination IP :
Ports:
Specify the remote IP address and then the port after the colon. Enable:
Check the box to enable the specified rule. Schedule Rule #:
Specify the schedule rule number. Click on the Add New Rule button to create a new schedule rule. Previous Page:
Go back to the previous filter page. Next Page:
Advance to the next filter page. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 50 Section 4 - Configuration SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor traffic and statistics of the DWR-922. The DWR-922 supports SNMP v1 and v2c. SNMP SNMP Local:
Select whether to Enable or Disable local SNMP administration. SNMP Remote:
Select whether to Enable or Disable remote SNMP administration. Get Community:
Enter the password public in this field to allow read-only access to network administration using SNMP. You can view the network, but no configuration is possible with this setting. Set Community:
Enter the password private in this field to enable read/write access to the network using SNMP. IP 1/IP 2/IP 3/IP 4:
Enter up to 4 IP addresses to use as trap targets for your network. SNMP Version:
Select the SNMP version of your system. WAN Access IP Address If you want to limit remote access SNMP access, enter the IP address of the remote computer you will use to access this device;
all other IP addresses will be denied remote SNMP access. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 51 Section 4 - Configuration Advanced Network contains settings which can change the way the router handles certain types of traffic. We recommend that you do not change any of these settings unless you are already familiar with them or have been instructed to make the change by one of our support personnel. Advanced Network Enable UPnP:
Check the box to enable the Universal Plug and Play (UPnP) feature. UPNP provides compatibility with various networking equipment, software, and peripherals. Enable WAN Ping Respond:
Select the box to allow the WAN port to be pinged. Blocking WAN pings may provide some extra security from hackers. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 52 Section 4 - Configuration This page lets you set whether to allow the DWR-922 to automatically select a 3G/4G network based on the inserted SIM/UICC card, and allows you to manually scan for networks and select one to connect to. Network Scan 3G/4G Network Selection Method:
Leave this setting on Auto to allow the DWR-922 to automatically select a cellular network to connect to. If you need to select a network manually, select Manual, click the Scan button, then select an available network to connect to. Note: You will only be able to scan for networks if the DWR-922 is not currently connected to a 3G/4G network. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 53 Section 4 - Configuration System Time Settings This section will help you set the time zone that you are in and an NTP (Network Time Protocol) server to use. Daylight Saving can also be configured to adjust the time when needed. Time Zone:
Select the appropriate Time Zone from the drop-down box. Enable Daylight Saving:
Check the box to allow for daylight saving adjustments. Use the drop-down boxes to specify a start date and end date for daylight saving time adjustments. Sync your computers time settings:
This button allows the router to set time zone and current time based on your computers configuration. To use this setting, ensure that Automatic Synchronization is unchecked and applied. Automatically synchronize with Internet time server:
NTP Server Used:
Check the box to allow the router to use an NTP server to update the routers internal clock. Enter an NTP server to use for time synchronization, or use the drop-down box to select one. Click the Update Now button to synchronize the time with the NTP server. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 54 Section 4 - Configuration The Admin page allows you to change the Administrator password and enable Remote Management. The admin has read/write access while users only have read-only access. Only the admin has the ability to change both admin and user account passwords. Administration Admin Password:
Enter and confirm the password that the admin account will use to access the routers management interface. Remote Management:
Tick this check box to enable remote management. Remote management allows the DWR-922 to be configured over the Internet through a web browser. A username and password will still be required to access the web-management interface. IP Allowed to Access:
Enter the Internet IP address of the PC that has access to the broadband router. If you enter an asterisk (*) in this field, then anyone will be able to access the router. Adding an asterisk (*) into this field could present a security risk and is not recommended. Port:
This is the port number used to access the router. 8080 is the port usually used for the web-management interface. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 55 Section 4 - Configuration Reboot & Reset Here, you can save the current system settings to a local hard drive. Save Settings To Local Hard Drive Use this option to save your current router configuration settings to a file. Click Save to open a file dialog, and then select a location and file name for the settings. Load Settings From Local Hard Drive:
Use this option to load previously saved router configuration settings. Click Choose File and select the saved file and then click the Upload Settings button to upload the settings to the router. Restore To Factory Default Settings:
This option will restore all settings back to their defaults. Any settings that have not been backed up will be lost, including any rules that you have created. Reboot the Device:
This option will reboot the router. D-Link DWR-922 User Manual 56 Section 4 - Configuration Firmware Upgrade Here, you can upgrade the firmware of your router. Make sure the firmware you want to use is on the local hard drive of the computer and then click Browse to upload the file. You can check for and download firmware updates at the D-Link support site at http://support.dlink.com. Current Firmware Version:
Current Firmware Date:
Select Firmware:
Displays your current firmwares version. Displays your current firmwares release date. After you have downloaded a new firmware, click Browse to locate the firmware on your computer, then click Upload to start the firmware upgrade. Warning: You must use a wired connection to upload the firmware file; do not use a wireless connection. During the upgrade process, do not power off your computer or router, and do not refresh the browser window until the upgrade is complete. Accept Unofficial Firmware:
If the firmware you want to install is not an official D-Link release, you will need to check this box. Warning: Unofficial firmware is not supported, and may cause damage to your device. Use of unofficial firmware is at your own risk. D-Link DWR-922 User Manual 57 Section 4 - Configuration The DWR-922 keeps a running log of events and activities occurring on the router. You may send these logs to a Syslog server on your network. System Logs Enable Logging to Syslog Server:
Check the box to send the router logs to a Syslog server. Syslog Server IP Address:
Enter the IP address of the Syslog server that the router will send the logs to. Click Apply to save your settings, or Refresh to revert to your previous settings. D-Link DWR-922 User Manual 58 Section 4 - Configuration This section allows you to manage schedule rules for various firewall and parental control features. Click Apply to save your settings, or Refresh to revert to your previous settings. Schedules Enable Schedule:
Check this box to enable schedules. Edit:
Click this icon to edit the selected rule. (see below) Delete:
Click this icon to delete the selected rule. Previous Page:
Click this button to go to the previous page of rules. Next Page:
Click this button to go to the next page of rules. Click this button to specify the start time, end time, and name of the rule. Add New Rule..:
Click this button to create a new rule. (see below) Add New Rule Name of Rule #:
Enter a name for your new schedule. Policy:
Select Activate or Inactivate to decide whether features that use the schedule should be active or inactive except during the times specified. Week Day:
Start Time
(hh:mm):
Select a day of the week for the start time and end time. Enter the time at which you would like the schedule to become active. End Time
(hh:mm):
Select the time at which you would like the schedule to become inactive. D-Link DWR-922 User Manual 59 Section 4 - Configuration This feature allows you to reset the Internet connection on your router by periodically resetting the connection. You can choose to have this happen on a predetermined schedule by configuring the options on this page. Connection Reset Auto-Reboot:
Select whether the connection reset feature should be enabled or disabled. Reboot-Schedule:
If the connection reset feature is enabled, select when it should activate via the hour and minute from the dropdown boxes. Daily Schedule:
Select this option if you want the connection reset feature to activate on a daily schedule. Weekly Schedule Day of Week:
Select this option if you want the connection reset feature to activate only on a certain day of the week. Date of Month:
Select this option if you want the connection reset feature to activate only on a certain day of the month. D-Link DWR-922 User Manual 60 Section 4 - Configuration Connect a Wireless Client to your Router WPS Button The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DWR-922 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DWR-922 for about 6 seconds. The WLAN LED on the front will start to blink. WPS Button Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be connected and your wireless connection will be secure with WPA2. D-Link DWR-922 User Manual 61 Section 5 - Connecting to a Wireless Network Connecting to a Wireless Network Windows 10 To connect to a wireless network using Windows 10, you will need to know the wireless network name (SSID) and Wi-Fi password
(security key) of the device you are connecting to. To join an existing network, locate the wireless network icon in the taskbar, next to the time display and click on it. Wireless Icon Clicking on this icon will display a list of wireless networks which are within range of your computer. Select the desired network by clicking on its SSID. D-Link DWR-922 User Manual 62 Section 4 - Connecting a Wireless Client To connect to the network, click Connect. To automatically connect when your device is in range, click the Connect Automatically check box. Your computer will now automatically connect to this wireless network whenever it is detected. You will then be prompted to enter the Wi-Fi password (network security key) for the wireless network. Enter the password into the box and click Next to connect to the network. You can also use Wi-Fi Protected Setup (WPS) to connect to the wireless network. Press the WPS button on your device and you will be automatically connected. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DWR-922 User Manual 63 Section 4 - Connecting a Wireless Client Windows 8 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DWR-922 User Manual 64 Section 5 - Connecting to a Wireless Network You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DWR-922 User Manual 65 Section 5 - Connecting to a Wireless Network Windows 7 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DWR-922 User Manual 66 Section 5 - Connecting to a Wireless Network 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to Networking Basics on page 88 for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DWR-922 User Manual 67 Section 5 - Connecting to a Wireless Network 5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DWR-922 User Manual 68 Section 5 - Connecting to a Wireless Network WPS The WPS feature of the DWR-922 can be configured using Windows 7. Carry out the following steps to use Windows 7 to configure the WPS feature:
1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DWR-922 User Manual 69 Section 5 - Connecting to a Wireless Network 3. Double-click the DWR-922. 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Routers Web UI) and click Next. D-Link DWR-922 User Manual 70 Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DWR-922 User Manual 71 Section 5 - Connecting to a Wireless Network 7. The following window appears while the router is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the router has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DWR-922 User Manual 72 Section 5 - Connecting to a Wireless Network Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another companys wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DWR-922 User Manual 73 Section 5 - Connecting to a Wireless Network WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DWR-922 User Manual 74 Section 5 - Connecting to a Wireless Network 3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DWR-922 User Manual 75 Section 5 - Connecting to a Wireless Network Windows XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another companys utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows XP utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks. The utility will display any available wireless networks in your area. Click on a Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DWR-922 User Manual 76 Section 5 - Connecting to a Wireless Network WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link DWR-922 User Manual 77 Section 5 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the WPA-
PSK Wi-Fi password and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DWR-922 User Manual 78 Section 5 - Connecting to a Wireless Network Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWR-922. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to these examples. 1. Why cant I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:
- Microsoft Internet Explorer 7 or higher
- Mozilla Firefox 3.5 or higher
- Google Chrome 8 or higher
- Apple Safari 4 or higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable, or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DWR-922 User Manual 79 Section 6 - Troubleshooting Configure your Internet settings:
Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, leave the password box empty. D-Link DWR-922 User Manual 80 Section 6 - Troubleshooting 3. Why cant I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL. Click on Start and then click Run. Windows 95, 98, and Me users type in command (Windows NT, 2000, XP, Vista, and 7 users type in cmd) and press Enter (or click OK). Once the window opens, youll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472 D-Link DWR-922 User Manual 81 Section 6 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network were working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router follow the steps below:
Navigate to the Internet configuration page (see Internet on page 8 for details). To change the MTU, enter the number in the MTU field and click Apply to save your settings. Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DWR-922 User Manual 82 Section 6 - Troubleshooting Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DWR-922 User Manual 83 Appendix A - Wireless Basics What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work?
Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networksl: Wireless Local Area Network
(WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DWR-922 User Manual 84 Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether its for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits Gives everyone at home broadband access Surf the web, check email, instant message, etc. Gets rid of the cables around the house Simple and easy to use Stay on top of everything at home as you would at office Remotely access your office network from home Share Internet connection and printer with multiple computers No need to dedicate office space Small Office and Home Office Uses/Benefits D-Link DWR-922 User Manual 85 Appendix A - Wireless Basics Where is wireless used?
Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. Using a D-Link CardBus Adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries restaurants, and convention centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or access point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Link DWR-922 User Manual 86 Appendix A - Wireless Basics Security Dont let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. Wireless Modes There are basically two modes of networking:
Infrastructure All wireless clients will connect to an access point or wireless router. Ad hoc Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DWR-922 wireless network CardBus adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An ad hoc network contains only clients, such as laptops with wireless CardBus adapters. All the adapters must be in ad hoc mode to communicate. D-Link DWR-922 User Manual 87 Appendix A - Wireless Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DWR-922 User Manual 88 Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1 Windows 7 -
Windows Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows XP -
Windows 2000 - From the desktop, right-click My Network Places > Properties. Connections. Click on Start > Control Panel > Network Connections. Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol Version 4 (TCP/IPv4) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.1.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router
(I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Alternate DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DWR-922 User Manual 89 Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DWR-922 offers the following types of security:
WPA2 (Wi-Fi Protected Access 2) WPA (Wi-Fi Protected Access) WPA2-PSK (Pre-Shared Key) WPA-PSK (Pre-Shared Key) What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP:
Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and by adding an integrity-checking feature, ensures that the keys havent been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computers hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DWR-922 User Manual 90 Appendix B - Networking Basics Technical Specifications LTE Band1 Category 3: Band 2/4/5/13/17/25 CDMA Mode 1xRTT and EV-DO Rev A. BC0/1/10 (800/1900 MHz) Pentaband UMTS/HSDPA/HSUPA/HSPA+/DC-HSPA+ Band1 850/900/1700/1900/2100 MHz GSM Quad-band1 850 / 900 / 1800 / 1900 MHz Data Rates2 Up to 300 Mbps with 802.11n clients 6 / 9 / 11 / 12 / 18 / 24 / 36 / 48 / 54 Mbps in 802.11g mode 1 / 2 / 5.5 / 11 Mbps in 802.11b mode LTE Uplink: Up to 50 Mbps LTE Downlink: Up to 100 Mbps Standards IEEE 802.11b/g, compatible with IEEE 802.11n devices IEEE 802.3i IEEE 802.3u Wireless Security 64 / 128-bit WEP (Wired Equivalent Privacy) WPA & WPA2 (Wi-Fi Protected Access) Firewall Network Address Translation (NAT) Stateful Packet Inspection (SPI) VPN L2TP/PPTP/IPSEC/VPN Pass-through Antenna Two detachable 3G/4G antennas Ports WAN port (RJ-45) Four LAN ports (RJ-45) SIM/UICC Slot Standard Mini-SIM/UICC slot LAN LED Status Indicators Power WLAN 2G / 3G 4G Signal Strength Dimensions 190 x 116 x 22.4 mm (7.43 x 4.57 x 0.88 in) Operating Temperature 0 to 40 C (32 to 104 F) Operating Humidity 10% to 90% (Non-condensing) Certifications FCC RoHS 1 Supported frequency band is dependent upon regional hardware version. 2 Maximum wireless signal rate derived from IEEE Standard 802.11g/b/n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DWR-922 User Manual 91 Appendix C - Technical Specifications Regulatory Information Federal Communication Commission Interference Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Compliance This equipment complies with radio frequency (RF) exposure limits adopted by the Federal Communications Commission for an uncontrolled environment. This equipment should operate with minimum distance 20 cm between the radiator & your body. The antenna gain, including cable loss, must not exceed 6.5 dBi at 800 MHz and/or 850 MHz, 3.0 dBi at 1900 MHz, 9.0 dBi at 700 MHz and 6 dBi at 1700 MHz. D-Link DWR-922 User Manual 92 Appendix D - Regulatory Information
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-12-13 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2016-12-13
|
||||
1 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
1 | FCC Registration Number (FRN) |
0007371172
|
||||
1 | Physical Address |
17595 Mt. Herrmann
|
||||
1 |
Fountain Valley, California 92708
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
KA2
|
||||
1 | Equipment Product Code |
WR922C3
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B****** A********
|
||||
1 | Title |
General Counsel
|
||||
1 | Telephone Number |
714-8********
|
||||
1 | Fax Number |
866-7********
|
||||
1 |
b******@dlink.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 06/11/2017 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 4G LTE Router | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | Yes | ||||
1 | Grant Comments | Power listed is maximum combined output power conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing with module FCC ID N7NMC7355. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
SPORTON International Inc.
|
||||
1 | Name |
A****** C******
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
a******@sporton.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | MO | 2412.00000000 | 2462.00000000 | 0.4416000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC