all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual 1 | Users Manual | 2.25 MiB | June 01 2005 | |||
1 |
|
Users Manual 2 | Users Manual | 2.81 MiB | June 01 2005 | |||
1 | Cover Letter(s) | June 01 2005 | ||||||
1 | Cover Letter(s) | June 01 2005 | ||||||
1 | Cover Letter(s) | June 01 2005 | ||||||
1 | External Photos | June 01 2005 | ||||||
1 | ID Label/Location Info | June 01 2005 | ||||||
1 | ID Label/Location Info | June 01 2005 | ||||||
1 | Internal Photos | June 01 2005 | ||||||
1 | Operational Description | June 01 2005 | ||||||
1 | RF Exposure Info | June 01 2005 | ||||||
1 | Test Report | June 01 2005 | ||||||
1 | Test Setup Photos | June 01 2005 |
1 | Users Manual 1 | Users Manual | 2.25 MiB | June 01 2005 |
D-Link AirPlusTM G DWL-G710 802.11g Wireless Range Extender Manual Building Networks for People Contents Package Contents ................................................................................3 Introduction............................................................................................4 Connections ..........................................................................................5 LEDs ....................................................................................................6 Features ...............................................................................................7 Wireless Basics ....................................................................................8 Installation Considerations ..................................................................10 Getting Started .................................................................................... 11 Using the Configuration Menu..............................................................13 Networking Basics .............................................................................19 Troubleshooting...................................................................................34 Technical Specifications ......................................................................41 Contacting Technical Support ..............................................................44 Warranty..............................................................................................45 Registration ........................................................................................48 2 Package Contents Contents of Package:
TM D-Link AirPlus G DWL-G710 802.11g Wireless Range Extender Power Adapter-DC 5V, 2.0A Manual on CD Quick Installation Guide Ethernet Cable If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DWL-G710 will cause damage and void the warranty for this product. System Requirements for Configuration:
Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet adapter
Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above 3 Introduction With a maximum wireless signal rate of up to five times the rate of previous wireless devices (up to 54Mbps*), you can work faster and more efficiently, increasing productivity. With the DWL-G710, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are able to move across the network quickly. The D-Link AirPlusTM G DWL-G710 Wireless Range Extender can repeat the wireless signal of D-Link AirPlusTM G access points and wireless routers to extend the range of your wireless network. The DWL-G710 is capable of a maximum wireless signal rate of up to 54Mbps when used with other D-Link AirPlusTM G products such as the DWL-G510 Wireless PCI Adapter, DWL-G630 Wireless Cardbus Adapter, and the DI-524 Wireless Router. The DWL-G710 is compatible with most popular operating systems, including Macintosh, Linux and Windows, and can be integrated into a large network.
*Maximum wireless signal rate based on IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. 4 Connections Pressing the Reset Button restores the DWL-G710 to its original factory default settings. The LAN Port is Auto-MDI/MDIX. You can insert either a straight-through or a crossover Ethernet cable in this port in order to connect the DWL-G710 to the local network. Receptor for the Power Adapter 5 LEDs LED stands for Light-Emitting Diode. The DWL-G710 Wireless Range Extender has 3 LEDs as shown below:
Power:
A steady green light indicates a connection to a power source. LAN:
A steady green light indicates a good Ethernet connection. WLAN:
A steady green light indicates a good wireless connection. A blinking light indicates that the DWL-G710 is receiving/transmitting from/to the wireless network. 6 Features and Benefits
Extends the range of your wireless network.
With a maximum wireless signal rate of up to 54Mbps* with AirPlus G Products, the DWL-G710 delivers media rich content such as digital images, videos, and MP3 files much faster than standard 802.11b networks.
Fully 802.11b compatible Fully compatible with the IEEE 802.11b standard and interoperable with all existing 802.11b compliant devices.
Easy setup with the setup wizard.
Web-based interface for managing and configuring Easy-to-use interface independent of the operating system. Simple configuration with the Site Survey tool. Just click on a network to extend the range of an access point or router in that network. No MAC addresses needed.
Auto-MDI/MDIX Ethernet port.
*Maximum wireless signal rate based on IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. 7 Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. D-Link wireless products will allow you access to the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings. A wireless local area network (WLAN) is a computer network that transmits and receives data with radio signals instead of wires. WLANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. People use WLAN technology for many different purposes:
Mobility - Productivity increases when people have access to data in any location within the operating range of the WLAN. Management decisions based on real-time information can significantly improve worker efficiency. Low Implementation Costs - WLANs are easy to set up, manage, change and relocate. Networks that frequently change can benefit from WLANs ease of implementation. WLANs can operate in locations where installation of wiring may be impractical. Installation and Network Expansion - Installing a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the network to go where wires cannot go - even outside the home or office. Inexpensive Solution - Wireless network devices are as competitively priced as conventional Ethernet network devices. Scalability - WLANs can be configured in a variety of ways to meet the needs of specific applications and installations. Configurations are easily changed and range from Peer-to-Peer networks suitable for a small number of users to larger Infrastructure networks to accommodate hundreds or thousands of users, depending on the number of wireless devices deployed. 8 Wireless Basics (continued) The DWL-G710 is compatible, in default mode, with the following wireless products:
D-Link AirPlusTM G DWL-G510 Wireless PCI Adapter used with desktop computers D-Link AirPlusTM G DWL-G630 Wireless Cardbus Adapter used with laptop computers D-Link AirPlusTM G DI-524 Wireless Router The DWL-G710 is also interoperable with other 802.11g and 802.11b standards-compliant devices. Standards-Based Technology The DWL-G710 Wireless Range Extender utilizes the 802.11b and the 802.11g standards. The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the maximum wireless signal rate up to 54Mbps* within the 2.4GHz band, utilizing OFDM technology. This means that in most environments, within the specified range of this device, you will be able to transfer large files quickly or even watch a movie in MPEG format over your network without noticeable delays. This technology works by transmitting high-speed digital data over a radio wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. OFDM works by splitting the radio signal into multiple smaller sub-signals that are then transmitted simultaneously at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference) in signal transmissions. The D-Link DWL-G710 will automatically sense the best possible connection speed to ensure the greatest speed and range possible.
*Maximum wireless signal rate based on IEEE Standard 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors lower actual data throughput rate. 9 Wireless Basics (continued) Installation Considerations TM The D-Link AirPlus G DWL-G710 lets you access your network, using a wireless connection, from virtually anywhere within its operating range. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1 Keep the number of walls and ceilings between the DWL-G710 and other network devices to a minimum - each wall or ceiling can reduce your DWL-G710s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2 Be aware of the direct line between network devices. A wall that is 1.5 feet thick
(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3 Building materials can impede the wireless signal - a solid metal door or aluminum studs may have a negative effect on range. Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials. 4 Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 10 Getting Started On the following pages we will show you an example of an Infrastructure Network incorporating the DWL-G710. An Infrastructure network contains an access point or a wireless router. The Infrastructure Network example shown on the following page contains the following D-Link network devices (your existing network may be comprised of other devices):
A wireless range extender -
D-Link AirPlusTM G DWL-G710
A wireless router - D-Link AirPlusTM G DI-524
A laptop computer with a wireless adapter -
D-Link AirPlusTM G DWL-G630 A desktop computer with a wireless adapter -
D-Link AirPlusTM G DWL-G510
A cable modem - D-Link DCM-201 11 Getting Started (continued) An example of a wireless Infrastructure network 11111 22222 33333 44444 55555 66666 Please remember that D-Link AirPlus G wireless devices are pre-configured to connect together, right out of the box, with their default settings. TM For a typical wireless setup at home (as shown above), please do the following:
You will need broadband Internet access (a cable or DSL-subscriber line into your home or office). Consult with your cable or DSL provider for proper installation of the modem. Connect the cable or DSL modem to the DI-524 router. (See the printed Quick Installation Guide included with your router.) Configure the DWL-G710 to communicate with the DI-524 router. (See the printed Quick Installation Guide included with the DWL-G710.) TM If you are connecting a desktop computer to your network, install the D-Link AirPlus G DWL-G510 wireless PCI adapter into an available PCI slot on your desktop computer.*
(See the printed Quick Installation Guide included with the network adapter.) Install the D-Link DWL-G630 wireless cardbus adapter into a laptop computer.
(See the printed Quick Installation Guide included with the DWL-G630.)*
*Both DWL-G630 and DWL-G510 should be configured to communicate with the DWL-G710, not the router. 12 Using the Configuration Menu After you have completed the Setup Wizard (please see the Quick Installation Guide that came with the product) you can access the Configuration menu at any time by opening the Web browser and typing in the IP address of the DWL-G710. The DWL-G710 default IP address is shown below:
Open the Web browser. Type in the IP address of the DWL-G710. http://192.168.0.30 Note: if you have changed the default IP address assigned to the DWL-G710, make sure to enter the correct IP address.
Type admin in the User name field. Leave the Password blank.
(However, if you have changed the password, please enter the correct password.)
Click OK. Home > Wizard The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard. 13 Using the Configuration Menu (continued) Network LAN IP-
Dynamic IP Address-
Static IP Address-
Select this option to receive a dynamic IP address from the DHCP server on your network. Assign a static IP address to the DWL-G710. This selection is recommended for ease of network configuration. IP Address- When Static IP Address is selected, you will input the static IP address of the DWL-G710 into this field. The IP address must be within the range of the IP addresses in your network. Subnet Mask-
Enter the subnet mask. Gateway-
Enter the IP address of the router in the network. Apply-
Click Apply to save the changes. 14 Using the Configuration Menu (continued) Wireless AP Name -
You may choose to rename your DWL-G710, especially if you have more than one DWL-G710 on your network. SSID (Service Set Identifier) -
Enter the SSID of the network you wish to repeat. Site Survey - Click Site Survey to receive a list of networks that are available for connection. Please see the screen on the following page for more information on this feature. Channel - Select the channel from the pulldown menu. All devices on the network must share the same channel in order to communicate. WEP - For a level of security, select Enable Encryption to use WEP (Wired Equivalent Privacy) on the network. All devices on the network, and the access point, must share the same WEP selection - either Enable or Disable. WEP Encryption - Select either 64- or 128-bit length. WEP Mode - Select ASCII or Hexadecimal mode and then input the appropriate digits or letters into each Key field. You can create up to 4 keys. Select the key you wish to use. Hexadecimal digits consist of the numbers 0-9 and the letters A-F ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers from 0-127 TX Rates - Select the transmission rate for the network. Apply - Click Apply to save the changes. 15 Using the Configuration Menu (continued) Click Site Survey in the Wireless configuration screen displayed on the previous page. Site Survey Scanning The DWL-G710 will scan the network. Please wait a few seconds for this process to complete. The Site Survey displays the features of each available network as follows:
SSID- Displays the network name. Security- Displays the type of security being used, or indicates that security is disabled. Channel- Indicates the channel the network is using. Signal%- Displays the signal strength of the network. Network Type- Indicates the net-
work type: Infrastructure or Ad-Hoc. The information shown here allows you to select a network to join, or gives you the information you need to configure your DWL-G710 for connection to a specific network. Site Survey Completed 16 Using the Configuration Menu (continued) Admin Administrator Settings - Change your password in this window. Re-enter the new password to confirm. It can be up to 14 characters in length. Please keep a copy of your password in a safe place. Click Apply, if you have made any changes. Click Cancel to clear the changes. Restore to Factory Default Settings - Click Restore to return to Factory Default Settings. (You will lose the current settings.) When you click Restore, the dialog box at right will appear. Click OK to restore to factory default settings or click Cancel to cancel the procedure. Firmware Upgrade - Upgrade the firmware for the DWL-G710. Find upgrades to the firmware on the D-Link website at http://support.dlink.com. After you have downloaded a firmware upgrade to your local drive, click Browse. Select the firmware and click Apply to complete the upgrade. Do not upgrade firmware from a computer with a wireless connection. Doing so may damage the device. Apply - Click Apply if you have made any changes. 17 Using the Configuration Menu (continued) Help Help Menu - Click on any item in the Help menu for more information. 18 Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000/Me/98SE. Go to Start>Control Panel>Network Connections Select Set up a home or small office network When this screen appears, click Next. 19 Networking Basics (continued) Please follow all the instructions in this window:
Click Next. In the following window, select the best description of your computer. If your computer connects to the Internet through a router, select the second option as shown. Click Next. 20 Networking Basics (continued) Enter a Computer description and a Computer name (optional.) Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next. 21 Networking Basics (continued) Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes. 22 Networking Basics (continued) In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A. Click Next. 23 Networking Basics (continued) Please read the information under Heres how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. Click Next. 24 Networking Basics (continued) Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use. 25 Networking Basics (continued) Naming your Computer To name your computer using Windows XP, please follow these directions:
Click Start (in the lower left corner of the screen). Right-click on My Computer. Select Properties.
Select the Computer Name Tab in the System Properties window.
You may enter a Computer Description if you wish; this field is optional.
To rename the computer and join a domain, click Change. 26 Networking Basics (continued) Naming your Computer (continued)
In this window, enter the Computer name.
Select Workgroup and enter the name of the Workgroup. All computers on your network must have the same Workgroup name.
Click OK. Checking the IP Address in Windows XP The adapter-equipped computers in your network must be in the same IP address range
(see Getting Started in this manual for a definition of IP address range.) To check on the IP address of the adapter, please do the following:
Right-click on the Local Area Connection icon in the task bar.
Click on Status. 27 Networking Basics (continued) Checking the IP Address in Windows XP This window will appear.
Click the Support tab.
Click Close. Assigning a Static IP Address in Windows XP/2000 Note: DHCP-capable routers will automatically assign IP addresses to the computers on the network, using DHCP (Dynamic Host Configuration Protocol) technology. If you are using a DHCP-capable router you will not need to assign static IP addresses. If you are not using a DHCP capable router, or you need to assign a static IP address, please follow these instructions:
Go to Start.
Double-click on Control Panel. 28
1 | Users Manual 2 | Users Manual | 2.81 MiB | June 01 2005 |
Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000
Double-click on Network Connections.
Right-click on Local Area Connections.
Double-click on Properties. 29 Networking Basics (continued) Assigning a Static IP Address in Windows XP/2000
Click on Internet Protocol
(TCP/IP).
Click Properties. D-Link DWL-G650
Input your IP address and subnet mask. (The IP addresses on your network must be within the same range. For example, if one computer has an IP address of 192.168.0.2, the other computers should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.)
Input your DNS server addresses. (Note: If you are entering a DNS server, you must enter the IP address of the default gateway.) The DNS server information will be supplied by your ISP (Internet Service Provider.)
Click OK. 30 Networking Basics (continued) Assigning a Static IP Address with Macintosh OSX
Go to the Apple Menu and select System Preferences.
cClick on Network.
Select Built-in Ethernet in the Show pull-down menu. Select Manually in the Configure pull-down menu. Built-in Ethernet
Input the Static IP Address, the Subnet Mask and the Router IP Address in the ap-
propriate fields.
Click Apply Now. 31 Networking Basics (continued) Selecting a Dynamic IP Address with Macintosh OSX
Go to the Apple Menu and select System Preferences.
Click on Network.
Select Built-in Ethernet in the Show pull-down menu.
Select Using DHCP in the Configure pull-down menu. Built-in Ethernet Manually Using DHCP
Click Apply Now.
The IP Address, Subnet mask, and the Routers IP Address will appear in a few seconds. 32 Networking Basics (continued) Checking the Wireless Connection by Pinging in Windows XP/ 2000
Go to Start > Run >
type cmd. A window similar to this one will appear. Type ping xxx.xxx.xxx.xxx, where xxx is the IP address of the wireless router or access point. A good wireless connection will show four replies from the wireless router or access point, as shown. Checking the Wireless Connection by Pinging in Windows Me/98
Go to Start > Run
> type command. A window similar to this will appear. Type ping xxx.xxx.xxx.xxx where xxx is the IP address of the wireless router or access point. A good wireless connection will show four replies from the wireless router or access point, as shown. 33 Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWL-G710 Wireless Range Extender. We cover various aspects of the network setup, including the network adapters. Please read the following if you are having problems. Note: It is recommended that you use an Ethernet connection to configure the DWL-G710 Wireless Range Extender. 1.The computer used to configure the DWL-G710 cannot access the configuration menu.
Check that the Ethernet LED on the DWL-G710 is ON. If the LED is not ON, check that the cable for the Ethernet connection is securely inserted. Check that the Ethernet adapter is working properly. Please see item 3 (Check that the drivers for the network adapters are installed properly) in this Troubleshooting section to check that the drivers are loaded properly. Check that the IP address is in the same range and subnet as the DWL-G710. Please see Checking the IP Address in Windows XP in the Networking Basics section of this manual. Note: The IP address of the DWL-G710 is 192.168.0.30. All the computers on the network must have a unique IP address in the same range, e.g., 192.168.0.x. Any computers that have identical IP addresses will not be visible on the network. They must all have the same subnet mask, e.g., 255.255.255.0
Do a Ping test to make sure that the DWL-G710 is responding. Go to Start>Run>Type Command>Type ping 192.168.0.30. A successful ping will show four replies. Note: If you have changed the default IP address, make sure to ping the correct IP address assigned to the DWL-G710. 34 Troubleshooting (continued) 2. The wireless client cannot access the Internet in Infrastructure mode. Make sure the wireless client is associated and joined with the correct device. To check this connection: Right-click on the local area connection icon in the taskbar> select View Available Wireless Networks. The Connect to Wireless Network screen will appear. Please make sure you have selected the correct available network, as shown in the illustration below. default
Check that the IP address assigned to the wireless adapter is within the same IP address range as the existing network. (Since the DWL-G710 has an IP address of 192.168.0.30, wireless adapters must have an IP address in the same range, e.g., 192.168.0.x. Each device must have a unique IP address; no two devices may have the same IP address. The subnet mask must be the same for all the computers on the network.) To check the IP address assigned to the wireless adapter, double-click on the local area connection icon in the taskbar > select the Support tab and the IP address will be displayed. (Please refer to Checking the IP Address in the Networking Basics section of this manual.) If it is necessary to assign a static IP address to the wireless adapter, please refer to the appropriate section in Networking Basics. If you are entering a DNS server address you must also enter the default gateway address. (Remember that if you have a DHCP-capable router, you will not need to assign a static IP address. See Networking Basics: Assigning a Static IP Address.) 35 Troubleshooting (continued) 2. The wireless client cannot access the Internet in the Infrastructure mode (continued).
Please note that the DWL-G710 is compatible with the following D-Link devices:
1 2 3 D-Link AirPlusTM G DI-524 Wireless Router D-Link AirPlusTM G DWL-G700AP Wireless Access Point D-Link AirPlusTM G DWL-G710 Wireless Range Extender
If you wish to repeat a device that is not a D-Link product, please check the FAQs for supported products on the D-Link support website
(http://support.dlink.com) to make certain that the device can be repeated by the DWL-G710. 3. Check that the drivers for the network adapters are installed properly. You may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using.
Go to Start > My Computer > Properties.
Select the Hardware tab.
Click Device Manager. 36 Troubleshooting (continued)
Double-click on Network Adapters.
Right-click on D-Link AirPlusTM G DWL-G630 Wireless Cardbus Adapter (In this example we use the DWL-G630;
you may be using other network adapters, but the procedure will remain the same.)
Select Properties to check that the drivers are installed properly.
Look under Device Status to check that the device is working properly. D-Link AirPlus G DWL-G630 D-Link AirPlus G DWL-G630 Wireless Cardbus Adapter D-Link AirPlus G DWL-G630 Wireless Cardbus Adapter
Click OK. 37 Troubleshooting (continued) 4. What variables may cause my wireless products to lose reception?
D-Link products let you access your network from virtually anywhere you want. However, the positioning of the products within your environment will affect the wireless range. Please refer to Installation Considerations in the Wireless Basics section of this manual for further information about the most advantageous placement of your D-Link wireless products. 5. Why does my wireless connection keep dropping?
Antenna Orientation - Try different antenna orientations for the DWL-G710. Try to keep the antenna at least 6 inches away from the wall or other objects. If you are using 2.4GHz cordless phones, X-10 equipment or other home security systems, ceiling fans, and lights, your wireless connection will degrade dramatically or drop altogether. Try changing the channel on your router, access point and wireless adapter to a different channel to avoid interference.
Keep your product away (at least 3-6 feet) from electrical devices that generate RF noise, like microwaves, monitors, electric motors, etc. 6. Why cant I get a wireless connection?
If you have enabled encryption on the DWL-G710, you must also enable encryption on all wireless clients in order to establish a wireless connection.
Make sure that the encryption bit level is the same on the DWL-G710 and the wireless client. Make sure that the SSID on the DWL-G710 and the wireless client are exactly the same. If they are not, wireless connection will not be established.
Check that the DWL-G710 is configured properly.
Check that the wireless clients are working properly. 38 Troubleshooting (continued) 6. Why cant I get a wireless connection? (continued)
Make sure that all devices are set to Infrastructure mode.
Check that the LEDs are indicating normal activity. If not, check that the AC power and Ethernet cables are firmly connected. Check that the IP address, subnet mask, and gateway settings are correctly entered for the network. If you are using 2.4GHz cordless phones, X-10 equipment or other home security systems, ceiling fans, and lights, your wireless connection will degrade dramatically or drop altogether. Try changing the channel on your DWL-G710, and on all the devices in your network to avoid interference.
Keep your product away (at least 3-6 feet) from electrical devices that generate RF noise, like microwaves, monitors, electric motors, etc. 7. I forgot my encryption key.
Reset the DWL-G710 to its factory default settings and restore the other devices on your network to their default settings. You may do this by pressing the Reset button on the back of the unit. You will lose the current configuration settings. 39 Troubleshooting (continued) 8. Resetting the DWL-G710 to factory default settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DWL-G710 to the factory default settings. Reset button To hard-reset the D-Link DWL-G710 to the factory default settings, please do the following:
Locate the Reset button on the back of the DWL-G710.
Use a paper clip to press the Reset button.
Hold for about 5 seconds and then release.
After the DWL-G710 reboots (this may take a few minutes) it will be reset to the factory Default settings. 40 Technical Specifications Standards
IEEE 802.11b
IEEE 802.11g
IEEE 802.3
IEEE 802.3u Device Management
Web-Based Internet Explorer v6 or later; Netscape Navigator v7 or later Data Rate For 802.11g:
54, 48, 36, 24, 18, 12, 9 and 6Mbps For 802.11b:
11, 5.5, 2, and1Mbps Security
64-, 128-bit WEP Wireless Frequency Range
2.412GHz to 2.462GHz
Channels 1-11 utilize the 2.4GHz band Wireless Operating Range*
802.11g (Full Power with 2dBi gain diversity dipole antenna) Outdoors:
164ft (50m) @ 54Mbps
492ft (150m) @ 36Mbps
656ft (200m) @ 11Mbps Power
External Power Supply: DC 5V/2A
* Environmental Factors may Adversely Affect Wireless Range 41 Technical Specifications (continued) Radio and Modulation Type For 802.11g:
OFDM:
BPSK @ 6 and 9Mbps
QPSK @ 12 and 18Mbps
16QAM @ 24 and 36Mbps
64QAM @ 48 and 54Mbps DSSS:
DBPSK @ 1Mbps
DQPSK @ 2Mbps
CCK @ 5.5 and 11Mbps For 802.11b:
DSSS:
DBPSK @ 1Mbps
DQPSK @ 2Mbps
CCK @ 5.5 and 11Mbps Wireless Transmit Power Typical RF Output Power at each Data Rate For 802.11g:
31mW (15dBm) @ 54Mbps
40mW (16dBm) @ 48Mbps
40mW (16dBm) @ 36, 24, 18, 12, 9, and 6Mbps For 802.11b:
50mW (17dBm) @ 11, 5.5, 2, and 1Mbps Receiver Sensitivity For 802.11g:
6Mbps: -82dBm
9Mbps: -81dBm
12Mbps: -79dBm
18Mbps: -77dBm
24Mbps: -74dBm
36Mbps: -70dBm
48Mbps: -66dBm
54Mbps: -65dBm For 802.11b:
1Mbps: -87dBm
2Mbps: -87dBm
5.5Mbps: -85dBm
11Mbps: -82dBm 42 Technical Specifications (continued) LEDs
Power
LAN
WLAN Temperature
Operating: 32F to 131F (0C to 55C)
Storing: -4F to 149F (-20C to 65C) Humidity
5%~95% (non-condensing) Certifications
FCC
UL Dimensions
L = 5.59 inches (142mm)
W = 4.29 inches (109mm)
H = 1.22 inches (31mm) Weight
0.44lbs (200g) Warranty
1 Year 43 TTTTTechni echni echni cal Support cal Support echnical Support cal Support echni cal Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our web site, or by phone. Tech Support for customers within the United States:
D-Link Technical Support over the Telephone:
(877) 453-5465 24 hours a day, seven days a week. D-Link Technical Support over the Internet:
http://support.dlink.com email:support@dlink.com Tech Support for customers within Canada:
D-Link Technical Support over the Telephone:
(800) 361-5265 Monday to Friday 7:30am to 9:00pm EST D-Link Technical Support over the Internet:
http://support.dlink.ca email:support@dlink.ca 44 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (D-Link) provides this Limited warranty for its product only to the person or entity that originally purchased the product from:
D-Link or its authorized reseller or distributor and Products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, addresses with an APO or FPO. Limited Warranty: D-Link warrants that the hardware portion of the D-Link products described below will be free from material defects in workmanship and materials from the date of original retail purchase of the product, for the period set forth below applicable to the product type (Warranty Period), except as otherwise stated herein. 1-Year Limited Warranty for the Product(s) is defined as follows:
Hardware (excluding power supplies and fans) One (1) Year Power Supplies and Fans One (1) Year Spare parts and spare kits Ninety (90) days D-Links sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund at D-Links sole discretion. Such repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement Hardware need not be new or have an identical make, model or part. D-Link may in its sole discretion replace the defective Hardware (or any part thereof) with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement Hardware will be warranted for the remainder of the original Warranty Period from the date of original retail purchase. If a material defect is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware (or part thereof) that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. Limited Software Warranty: D-Link warrants that the software portion of the product (Software) will substantially conform to D-Links then current functional specifications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (Warranty Period), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. D-Links sole obligation shall be to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Links functional specifications for the Software or to refund at D-Links sole discretion. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Software will be warranted for the remainder of the original Warranty Period from the date or original retail purchase. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-
conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates. Non-Applicability of Warranty: The Limited Warranty provided hereunder for hardware and software of D-Links products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold As-Is without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary. Submitting A Claim: The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:
The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same. 45 The original product owner must obtain a Return Material Authorization (RMA) number from the Authorized D-Link Service Office and, if requested, provide written proof of purchase of the product (such as a copy of the dated purchase invoice for the product) before the warranty service is provided. After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the Product and will not ship back any accessories. The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery
(COD) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges are prepaid by the customer and upon request. Return Merchandise Ship-To Address USA: 17595 Mt. Herrmann, Fountain Valley, CA 92708 Canada: 2180 Winston Park Drive, Oakville, ON, L6H 5W1 (Visit http://www.dlink.ca for detailed warranty information within Canada) D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Links reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. What Is Not Covered: This limited warranty provided by D-Link does not cover: Products, if in D-Links judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs;
Operational adjustments covered in the operating manual for the product, and normal maintenance;
Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage;
Any hardware, software, firmware or other products or services provided by anyone other than D-
Link; Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product. Repair by anyone other than D-Link or an Authorized D-Link Service Office will void this Warranty. Disclaimer of Other Warranties: EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED AS-IS WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-
LINKS PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON-CONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. 46 Governing Law: This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective manufacturers or owners. Copyright Statement: No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976. Contents are subject to change without prior notice. Copyright 2002 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
D-Link declares that the DWL-G710 (FCC ID: KA2DWLG710A1) is limited in CH1~CH11 by specified firmware controlled in the USA. 47 Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
(12/15/04) 48
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2005-01-06 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2005-01-06
|
||||
1 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
1 | FCC Registration Number (FRN) |
0007371172
|
||||
1 | Physical Address |
17595 Mt. Herrmann
|
||||
1 |
Fountain Valley, California 92708
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
i******@ckccertification.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
KA2
|
||||
1 | Equipment Product Code |
DWLG710A1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B****** A******
|
||||
1 | Title |
General Counsel
|
||||
1 | Telephone Number |
714-8********
|
||||
1 | Fax Number |
866-7********
|
||||
1 |
b******@dlink.com
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Advance Data Technology Corporation
|
||||
1 | Name |
C**** C******
|
||||
1 | Physical Address |
No.19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 |
Taoyuan Hsien, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
C******@adt.com.tw
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Advance Data Technology Corporation
|
||||
1 | Name |
S****** H********
|
||||
1 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 |
Taoyuan Hsien, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
s******@adt.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | AirPlus GTM 2.4GHz Wireless Range Extender | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power Output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Advance Data Tech. Corp. Hsin Chu EMC
|
||||
1 | Name |
S******** C********
|
||||
1 | Telephone Number |
88626********
|
||||
1 | Fax Number |
88626********
|
||||
1 |
s******@mail.adt.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0510000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC