Bluetooth Smart Plug DSP-T115A Quick Install Guide CONTENTS OF PACKAGING BLUETOOTH SMART PLUG DSP-T115A QUICK INSTALL CARD If any of these items are missing from your packaging, please contact your reseller. For the full product specificaions, please go to http://www.dlink.com SYSTEM REQUIREMENTS An internet connection from a Wi-Fi router or LTE service. DCH-G601W Wi-Fi Bluetooth Hub or DCH-G601 LTE Bluetooth Hub An e-mail account (required to register for Afero service) Note: The Afero app is available for iPhone, iPad, and Android devices. Please refer to the mobile app's store page to check whether your device is compatible. DSP-T115A 1 ENGLISH SETUP EXAMPLE The DSP-T115A Bluetooth Smart Plug allows you to be notified of the presence of water so you can stop flooding from getting out of hand from wherever you are. The following diagram shows how you can set up your Smart Home for use with the DSP-T115A. Cellular Tower Internet Router Hub or Home appliance DSP-T115A Smartphone with Afero app SAFETY For your safety, please read the following precautions before installing or using your DSP-T115A:
1. Do not open the device or attempt to repair or service it. 2. Use the device in a dry location, and avoid placing it in a humid environment. 3. Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, disconnect it from the power outlet and use a damp towel. 4. This device should only be used indoors. 2 DSP-T115A ENGLISH PRODUCT SETUP USING THE MOBILE APP FOR SETUP Step 1:
On your mobile device, download and install the Afero app from the App Store or Google Play. Step 2:
Launch the app and log into your Afero account. New users: Tap CREATE ACCOUNT to register for a new Afero account. Existing users: Tap SIGN IN to log in with your Afero email and password. Step 3:
After signing in, tap the Device, and follow the instructions. icon in the top-left corner, then tap Add When you are asked to scan a QR code, use the code on the label attached to your device, or on the Quick Install Card in your package. Once the configuration process is complete, use the Afero app to automate your home and stay updated with instant push notifications to your mobile device while you're away from home. DSP-T115A 3 ENGLISH PRODUCT SETUP INSTALLING THE DEVICE Please refer to the steps below to quickly get your DSP-T115A up and running. Step 1:
If you haven't already done so, add the DSP-T115A to your Afero account. Refer to the previous page for details. Step 2 :
Switch your home appliance to the ON position. Step 3:
Connect your home appliance's power cord to the DSP-T115A. Step 4:
Configure DSP-T115A settings in the Afero app. 4 DSP-T115A ENGLISH TROUBLESHOOTING SETUP AND CONFIGURATION PROBLEMS 1. HOW DO I RESET THE DSP-T115A?
Remove the DSP-T115A from your Afero account, it will change your settings back to the default settings. 2. WHY CAN'T I CONNECT MY DSP-T115A TO MY AFERO ACCOUNT?
The DCH-G601W Wi-Fi Bluetooth Hub connected to a wireliss router with an internet connection or the DCH-G601 LTE Bluetooth Hub with mobile data service is required. Please unsure that the hub is connected to the internet and properly set up with your Afero account. 3. WHAT APP DOES THE DSP-T115A WORK WITH?
The DSP-T115A works with the Afero app. You may download the free app from the App Store (for Apple devices) or Google Play (for Android devices). Type Afero to search for the app. 3. HOW DOES THE DSP-T115A WORK WHILE I AM AWAY FROM HOME?
Remote access of the DSP-T115A is enabled once you have connected it to your hub by registering it with your Afero account. You will be able to control it from anywhere using your iPhone, iPad or Android device. DSP-T115A 5 ENGLISH REGULATORY STATEMENTS FEDERAL COMMUNICATION COMMISSION Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
FCC Caution:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 6 DSP-T115A ENGLISH INDUSTRY CANADA Industry Canada Statement 1. 2. 3. 4. 1. 2. 3. 4. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
undesired operation of the device. This device may not cause interference this device must accept any interference, including interference that may cause This Class B digital apparatus complies with Canadian ICES-003. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:
brouillage est susceptible d'en compromettre le fonctionnement. L'appareil ne doit pas produire de brouillage L'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.. Cet appareil et son antenne ne doivent pas tre situs ou fonctionner en conjonction avec une autre antenne ou un autre metteur, exception faites des radios intgres qui ont t testes. La fonction de slection de l'indicatif du pays est dsactive pour les produits commercialiss aux tats-Unis et au Canada. Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. DSP-T115A 7 ENGLISH