FCC ID: KA2IR615E3 D-Link DIR-615 Wireless N Router

Section 1 - Product Overview Product Overview Package Contents D-Link DIR-615 Wireless N Router Power Adapter Ethernet Cable CD-ROM Note: Using a power supply with a different voltage rating than the one included with the DIR-615 will cause damage and void the warranty for this product. D-Link DIR-615 User Manual 1 Secton 1 - Product Overvew System Requirements Network.Requirements An Ethernet-based Cable or DSL modem IEEE 802.11n-draft/g wireless clients 10/100 Ethernet Computer.with.the.following:

Windows, Macintosh, or Linux-based operating system An installed Ethernet adapter Web-based.Configuration. Utility.Requirements Browser.Requirements:

Internet Explorer 6 or higher Mozilla 1.7.12 or higher Firefox 3.0 or higher Safari 3 or higher Flock 0.7.14 or higher Opera 6.0 or higher Windows.Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. CD.Installation.Wizard. Requirements Computer.with.the.following:

Windows XP with Service Pack 2 or Vista An installed Ethernet adapter CD-ROM drive D-Lnk DIR-615 User Manual



Secton 1 - Product Overvew Features

.Faster.Wireless.Networking - The DIR-615 provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. Compatible.with.802.11g.Devices - The DIR-615 is still fully compatible with the IEEE 802.11g standard, so it can connect with existing 802.11g PCI, USB and Cardbus adapters. Advanced.Firewall.Features - The Web-based user interface displays a number of advanced network management features including:

Content.Filtering - Easily applied content filtering based on MAC Address, URL, and/or Domain Name. Filter.Scheduling - These filters can be scheduled to be active on certain days or for a duration of hours or minutes. Secure.Multiple/Concurrent.Sessions - The DIR-615 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-615 can securely access corporate networks. User-friendly.Setup.Wizard - Through its easy-to-use Web-based user interface, the DIR-615 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your companys server. Configure your router to your specific settings within minutes.

* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Lnk DIR-615 User Manual



Section 1 - Product Overview Hardware Overview Connections Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem. Power Receptor Receptor for the supplied power adapter. LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and hubs. Reset Pressing the Reset button restores the router to its original factory default settings. D-Link DIR-615 User Manual 4 Section 1 - Product Overview Hardware Overview LEDs WLAN LED A solid light indicates that the wireless segment is ready. This LED blinks during wireless data transmission. Internet LED A solid light indicates connection on the Internet port. This LED blinks during data transmission. Power LED A solid light indicates a proper connection to the power supply. Local Network LEDs A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. This LED blinks during data transmission. D-Link DIR-615 User Manual 5 Secton  - Installaton Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Before you Begin Please configure the router with the computer that was last connected directly to your modem. You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. When running the Setup Wizard from the D-Link CD, make sure the computer you are running the CD from is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the modem and make sure you are online. D-Lnk DIR-615 User Manual 6 Secton  - Installaton Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:

1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum

- each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet

(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water

(fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Lnk DIR-615 User Manual



Section 2 - Installation Network Diagram D-Link DIR-615 User Manual 8 Secton  - Installaton Connect to Cable/DSL/Satellite Modem If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:

1. Place the router in an open and central location. Do not plug the power adapter into the router. 2. Turn the power off on your modem. If there is no on/off switch, then unplug the modems power adapter. Shut down your computer. 3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and place it into the Internet port on the router. 4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port on your computer. 5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds). 6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot. 7. Turn on your computer. 8. Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer is plugged into) should be lit. If not, make sure your computer, modem, and router are powered on and verify the cable connections are correct. 9. Skip to page 13 to configure your router. D-Lnk DIR-615 User Manual



Secton  - Installaton Connect to Another Router If you are connecting the D-Link router to another router to use as a wireless access point and/or switch, you will have to do the following before connecting the router to your network:

Disable UPnP Disable DHCP Change the LAN IP address to an available address on your network. The LAN ports on the router cannot accept a DHCP address from your other router. To connect to another router, please follow the steps below:

1. Plug the power into the router. Connect one of your computers to the router (LAN port) using an Ethernet cable. Make sure your IP address on the computer is 192.168.0.xxx (where xxx is between 2 and 254). Please see the Networking.Basics section for more information. If you need to change the settings, write down your existing settings before making any changes. In most cases, your computer should be set to receive an IP address automatically in which case you will not have to do anything to your computer. 2. Open a web browser and enter http://192.168.0.1 and press Enter. When the login window appears, set the user name to Admin and leave the password box empty. Click Log.In to continue. 3. Click on Advanced and then click Advanced.Network. Uncheck the Enable UPnP checkbox. Click Save.Settings to continue. 4. Click Setup and then click Network.Settings. Uncheck the Enable DHCP Server server checkbox. Click Save. Settings to continue. 5. Under Router Settings, enter an available IP address and the subnet mask of your network. Click Save.Settings to save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change your computers IP settings back to the original values as in Step 1. D-Lnk DIR-615 User Manual 10 Secton  - Installaton 6. Disconnect the Ethernet cable from the router and reconnect your computer to your network. 7. Connect an Ethernet cable in one of the LAN ports of the router and connect it to your other router. Do not plug anything into the Internet port of the D-Link router. 8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network. D-Lnk DIR-615 User Manual 11 Secton  - Installaton Getting Started The DIR-615 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. You may manually configure your router without the wizard. Refer to the next page to manually setup your router. Insert the Quick.Router.Setup.Wizard.CD in the CD-ROM drive. The step-by-step instructions that follow are shown in Windows XP or Vista. The steps and screens are similar for the other Windows operating systems. If the CD autorun function does not automatically start on your computer, go to Start > Run. In the run box type D:\DIR615.exe (where D: represents the drive letter of your CD-ROM drive). When the autorun screen appears, click Install.Router. and follow the on-screen instructions. Note: It is recommended to write down the login password on the provided CD holder. D-Lnk DIR-615 User Manual 1

Secton  - Configuraton Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router

(192.168.0.1). You may also connect using the NetBIOS name in the address bar (http://dlinkrouter). Select Admin from the drop-down menu and then enter your password. Leave the password blank by default. Type in the graphical authentication code (if you cannot read it, click Regenerate). The graphical authentication will be disabled by default. If you get a Page.Cannot.be.Displayed error, please refer to the Troubleshooting section for assistance. D-Lnk DIR-615 User Manual 1

Secton  - Configuraton Internet Connection Setup Wizard Once logged into the web interface of the router, the Setup.>.Internet page will appear. Click the Internet.Connection. Setup.Wizard button to quickly configure your router using the setup wizard. If you want to enter your settings without running the wizard, click Manual.Internet.Configuration. Wizard and skip to page 19. D-Lnk DIR-615 User Manual 1

Secton  - Configuraton Click Next to continue. Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. D-Lnk DIR-615 User Manual 15 Secton  - Configuraton Select the type of Internet connection you use and then click Next to continue. If you selected Dynamic, you may need to enter the MAC address of the computer that was last connected directly to your modem. If you are currently using that computer, click Clone.Your. PCs. MAC. Address and then click Next to continue. The Host Name is optional but may be required by some ISPs. The default host name is the device name of the Router and may be changed. D-Lnk DIR-615 User Manual 16 Secton  - Configuraton If you selected PPPoE, enter your PPPoE username and password. Click Next to continue. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. Note:.Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If you selected PPTP, enter your PPTP username and password. Click Next to continue. D-Lnk DIR-615 User Manual 1

Secton  - Configuraton If you selected L2TP, enter your L2TP username and password. Click Next to continue. If you selected Static, enter your network settings supplied by your Internet provider. Click Next to continue. The Setup is now complete. Click the Connect to save your settings. Please allow 1-2 minutes to connect. D-Lnk DIR-615 User Manual 1

Secton  - Configuraton Manual Configuration Dynamic (Cable) If you opt to set up your Internet connection manually, you will be redirected to a WAN page that allows you to select your Internet type and enter the correct configuration parameters. Select your Internet connection type using the My. Internet. Connection.is drop-down menu. Click the Save. Settings button when you have configured the connection. My Internet Connection:

Select Dynamic. IP. (DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for cable modem services such as Comcast and Cox. Enable Advanced DNS Service:

Host Name:

Use Unicasting:

Primary/

Secondary DNS Server:

Advanced Domain Name System (DNS) services enhances your Internet performance by getting you the information and web pages you are looking for faster and more reliably. In addition, it improves your overall Internet experience by correcting many common typo mistakes automatically, taking you where you intended to go and saving you valuable time. Disclaimer: D-Link makes no warranty as to the availability, reliability, functionality and operation of the Advanced DNS service or its features. The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure. Check the box if you are having problems obtaining an IP address from your ISP. Enter the Primary and secondary DNS server IP addresses assigned by your ISP. These addresses are usually obtained automatically from your ISP. Leave at 0.0.0.0 if you did not specifically receive these from your ISP. D-Lnk DIR-615 User Manual 1

Secton  - Configuraton MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. MAC Address:

The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PCs. MAC.Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Lnk DIR-615 User Manual

0 Secton  - Configuraton PPPoE (DSL) Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. My Internet Connection:

Select PPPoE. (Username/Password) from the drop-down menu. Address Mode:

Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. IP Address:

Enter the IP address (Static PPPoE only). User Name:

Enter your PPPoE user name. Password:

Enter your PPPoE password and then retype the password in the next box. Service Name:

Enter the ISP Service Name (optional). Reconnection Mode:

Select either Always-on, On-Demand, or Manual. Maximum Idle Time:

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. DNS Addresses:

Enter the Primary and Secondary DNS Server Addresses (Static PPPoE only). D-Lnk DIR-615 User Manual

1 Secton  - Configuraton MTU:

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. MAC Address:

The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PCs. MAC.Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Lnk DIR-615 User Manual



Secton  - Configuraton PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode:

Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. PPTP IP Address:

Enter the IP address (Static PPTP only). PPTP Subnet Mask:

Enter the Primary and Secondary DNS Server Addresses (Static PPTP only). PPTP Gateway:

Enter the Gateway IP Address provided by your ISP. PPTP Server IP:

Enter the Server IP provided by your ISP

(optional). Username:

Enter your PPTP username. Password:

Enter your PPTP password and then retype the password in the next box. Reconnect Mode:

Select either Always-on, On-Demand, or Manual. Maximum Idle Time:

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. DNS Servers:

The DNS server information will be supplied by your ISP (Internet Service Provider.) MTU:

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. D-Lnk DIR-615 User Manual



Secton  - Configuraton MAC Address:

The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PCs. MAC.Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Lnk DIR-615 User Manual



Secton  - Configuraton L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Address Mode:

Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. L2TP IP Address:

Enter the L2TP IP address supplied by your ISP (Static only). L2TP Subnet Mask:

Enter the Subnet Mask supplied by your ISP

(Static only). L2TP Gateway:

Enter the Gateway IP Address provided by your ISP. L2TP Server IP:

Enter the Server IP provided by your ISP

(optional). Username:

Enter your L2TP username. Password:

Enter your L2TP password and then retype the password in the next box. Reconnect Mode:

Select either Always-on, On-Demand, or Manual. Maximum Idle Time:

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. DNS Servers:

Enter the Primary and Secondary DNS Server Addresses (Static L2TP only). D-Lnk DIR-615 User Manual

5 Secton  - Configuraton MTU:

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. Clone MAC Address:

The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone.Your.PCs. MAC.Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Lnk DIR-615 User Manual

6 Secton  - Configuraton Static IP Address Select Static IP Address if all the Internet ports IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format. IP Address:

Enter the IP address assigned by your ISP. Subnet Mask:

Enter the Subnet Mask assigned by your ISP. Default Gateway:

Enter the Gateway assigned by your ISP. DNS Servers:

The DNS server information will be supplied by your ISP (Internet Service Provider.) MTU:

Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. MAC Address:

The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone. Your. PCs. MAC. Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. D-Lnk DIR-615 User Manual



Secton  - Configuraton Wireless Settings If you want to configure the wireless settings on your router using the wizard, click Wireless.Network.Setup. Wizard.and refer to page 79. Click Add.Wireless.Device.with.WPS if you want to add a wireless device using Wi-Fi Protected Setup (WPS) and refer to page 82. If you want to manually configure the wireless settings on your router click Manual Wireless.Network.Setup. and refer to the next page. D-Lnk DIR-615 User Manual



Secton  - Configuraton Manual Wireless Network Setup Enable Wireless:

Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Click Add.New to create your own time schedule to enable the wireless function. Wireless Network Name:

Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive. 802.11 Mode:

Select one of the following:

802.11g.Only - Select if all of your wireless clients are 802.11g. Mixed. 802.11g. and. 802.11b - Select if you are using both 802.11b and 802.11g wireless clients. 802.11b.Only - Select if all of your wireless clients are 802.11b. 802.11n.Only - Select only if all of your wireless clients are 802.11n. Mixed.802.11n,.802.11b,.and.802.11g - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients. Mixed.802.11n.and.802.11g - Select if you are using a mix of 802.11n and 802.11g wireless clients. Enable Auto Channel Scan:

The Auto.Channel.Scan setting can be selected to allow the DIR-615 to choose the channel with the least amount of interference. Wireless Channel:

Indicates the channel setting for the DIR-615. By default the channel is set to 6. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto.Channel.Scan, this option will be greyed out. D-Lnk DIR-615 User Manual



Secton  - Configuraton Transmission Rate:

Select the transmit rate. It is strongly suggested to select Best.(Auto) for best performance. Channel Width:

Select the Channel Width:

Auto.20/40 - Select if you are using both 802.11n and non-802.11n wireless devices. 20MHz - Select if you are not using any 802.11n wireless clients. This is the default setting. Visibility Status:

Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-615. If Invisible is selected, the SSID of the DIR-615 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-615 in order to connect to it. Wireless Security:

Refer to page 79 for more information regarding wireless security. D-Lnk DIR-615 User Manual

0 Secton  - Configuraton Network Settings This section will allow you to change the local network settings of the router and to configure the DHCP settings. IP Address:

Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Apply, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask:

Enter the Subnet Mask. The default subnet mask is 255.255.255.0. Local Domain:

Enter the Domain name (Optional). Enable DNS Relay:

Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Lnk DIR-615 User Manual

1 Secton  - Configuraton DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The DIR-615 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to Obtain an IP Address Automatically. When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-615. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. Enable DHCP Server:

Check this box to enable the DHCP server on your router. Uncheck to disable this function. DHCP IP Address Range:

Enter the starting and ending IP addresses for the DHCP servers IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. Lease Time:

The length of time for the IP address lease. Enter the Lease time in minutes. Always Broadcast:

Enable this function to ensure compatibility with some DHCP clients. Learn NetBIOS WAN:

If NetBIOS advertisement is switched on, switching this setting on causes WINS information to be learned from the WAN side, if available. Turn this setting off to configure manually. Net BIOS scope:

This is an advance setting and is normally left blank. This allows the configuration of NetBIOS domain name under which network hosts operate. This setting has no effect if the Learn NetBIOS information form WAN is activated. D-Lnk DIR-615 User Manual



Secton  - Configuraton DHCP Reservation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DHCP IP Address Range. Enable:

Check this box to enable the reservation. Computer Name:

Enter the computer name or select from the drop-

down menu and click <<. IP Address:

Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range. MAC Address:

Enter the MAC address of the computer or device. Copy Your PCs MAC Address:

If you want to assign an IP address to the computer you are currently on, click this button to populate the fields. Save:

Click Save to save your entry. You must click Save. Settings at the top to activate your reservations. Number of Dynamic DHCP Clients:

In this section you can see what LAN devices are currently leasing IP addresses. Revoke:

Click Revoke to cancel the lease for a specific LAN device and free an entry in the lease table. Do this only if the device no longer needs the leased IP address, because, for example, it has been removed from the network. D-Lnk DIR-615 User Manual



Secton  - Configuraton Note: The Revoke option will not disconnect a PC with a current network session from the network; you would need to use MAC Address Filter to do that. Revoke will only free up a DHCP Address for the very next requester. If the previous owner is still available, those two devices may both receive an IP Address Conflict error, or the second device may still not receive an IP Address; in that case, you may still need to extend the DHCP IP Address Range to address the issue, it is located in the DHCP Server section. Reserve:

The Reserve option converts this dynamic IP allocation into a DHCP Reservation and adds the corresponding entry to the DHCP Reservations List. D-Lnk DIR-615 User Manual



Secton  - Configuraton Virtual Server The DIR-615 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DIR-615 firewall feature filters out unrecognized packets to protect your LAN network so all computers networked with the DIR-615 are invisible to the outside world. If you wish, you can make some of the LAN computers accessible from the Internet by enabling Virtual Server. Depending on the requested service, the DIR-615 redirects the external service request to the appropriate server within the LAN network. The DIR-615 is also capable of port-redirection meaning incoming traffic to a particular port may be redirected to a different port on the server computer. Each virtual service that is created will be listed at the bottom of the screen in the Virtual Servers List. There are pre-defined virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service. For a list of ports for common applications, please visit http://support.dlink.com/faq/view.asp?prod_id=1191. D-Lnk DIR-615 User Manual

5 Secton  - Configuraton This will allow you to open a single port. If you would like to open a range of ports, refer to the next page. Name:

Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields. IP Address:

Private Port/

Public Port:

Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name drop-down menu. Select your computer and click <<. Enter the port that you want to open next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the Internet side, and the private port is the port being used by the application on the computer within your local network. Protocol Type:

Select TCP, UDP, or Both.from the drop-down menu. Inbound Filter:

Select Allow. All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced.>.Inbound.Filter page. Schedule:

The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Lnk DIR-615 User Manual

6 Secton  - Configuraton Port Forwarding This will allow you to open a single port or a range of ports. Name:

Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields. IP Address:

Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name drop-down menu. Select your computer and click <<. TCP/UDP:

Enter the TCP and/or UDP port or ports that you want to open. You can enter a single port or a range of ports. Separate ports with a common. Example: 24,1009,3000-4000 Inbound Filter:

Select Allow. All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced.>.Inbound.Filter page. Schedule:

The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Lnk DIR-615 User Manual



Secton  - Configuraton Application Rules Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-615. If you need to run applications that require multiple connections, specify the port normally associated with an application in the Trigger Port field, select the protocol type as TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic. The DIR-615 provides some predefined applications in the table on the bottom of the web page. Select the application you want to use and enable it. Name:

Enter a name for the rule. You may select a pre-defined application from the drop-down menu and click <<. Trigger:

This is the port used to trigger the application. It can be either a single port or a range of ports. Traffic Type:

Select the protocol of the trigger port (TCP, UDP, or Both). Firewall:

This is the port number on the Internet side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Traffic Type:

Select the protocol of the firewall port (TCP, UDP, or Both). Schedule:

The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Lnk DIR-615 User Manual



Secton  - Configuraton QoS Engine The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are disabled and application priority is not classified automatically. Enable QoS Engine:

This option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP. Automatic Uplink Speed:

This option is enabled by default when the QoS Engine option is enabled. This option will allow your router to automatically determine the uplink speed of your Internet connection. Measured Uplink Speed:

Manual Uplink Speed:

This displays the detected uplink speed. The speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISPs offer speed as a download/

upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink speed with a service such as www.dslreports.com. D-Lnk DIR-615 User Manual



Secton  - Configuraton Network Filters Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Configure MAC Filtering:

Select Turn MAC Filtering Off, allow MAC addresses listed below, or deny MAC addresses listed below from the drop-down menu. MAC Address:

Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client:

Select a DHCP client from the drop-down menu and click << to copy that MAC Address. D-Lnk DIR-615 User Manual

0

Secton  - Configuraton Access Control The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games. Add Policy:

Check the Enable.Access.Control check box and click the Add. Policy button to start the Access.Control.Wizard. Access Control Wizard Click Next to continue with the wizard. D-Lnk DIR-615 User Manual

1 Secton  - Configuraton Access Control Wizard (continued) Enter a name for the policy and then click Next to continue. Select a schedule (I.E. Always) from the drop-down menu and then click Next to continue. Enter the following information and then click Next to continue. Address.Type - Select IP address, MAC address, or Other Machines. IP.Address - Enter the IP address of the computer you want to apply the rule to. D-Lnk DIR-615 User Manual



Secton  - Configuraton Access Control Wizard (continued) Select the filtering method and then click Next to continue. Enter the rule:

Enable - Check to enable the rule. Name - Enter a name for your rule. Dest.IP.Start - Enter the starting IP address. Dest.IP.End - Enter the ending IP address. Protocol - Select the protocol. Dest.Port.Start - Enter the starting port number. Dest.Port.End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. D-Lnk DIR-615 User Manual



Secton  - Configuraton Website Filters Website Filters are used to allow you to set up a list of allowed Web sites that can be used by multiple users through the network. To use this feature select to Allow or Deny, enter the domain or website and click Add, and then click Save.Settings. You must also select Apply.Web.Filter under the Access Control section (page 40). Configure Website Filter Below:

Select Deny or Allow computers access to only these sites. Clear the list below:

Click to delete all entries in the list. Website URL/

Domain:

Enter the keywords or URLs that you want to allow or deny. D-Lnk DIR-615 User Manual



Secton  - Configuraton Inbound Filters The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote Administration features. Name:

Enter a name for the inbound filter rule. Action:

Select Allow or Deny. Enable:

Check to enable rule. Source IP Start:

Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify an IP range. Source IP End:

Enter the ending IP address. Enter 255.255.255.255 if you do not want to specify and IP range. Save:

Click the Save button to apply your settings. You must click Save Settings at the top to save the settings. Inbound Filter Rules List:

This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. D-Lnk DIR-615 User Manual

5 Secton  - Configuraton A firewall protects your network from the outside world. The D-Link DIR-615 offers a firewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the chosen computer completely to the outside world. Firewall Settings Enable SPI:

SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking more state per session. It validates that the traffic passing through the session conforms to the protocol. NAT Endpoint Filtering:

Select one of the following for TCP and UDP ports:

Endpoint.Independent.- Any incoming traffic sent to an open port will be forwarded to the application that opened the port. The port will close if idle for 5 minutes. Address.Restricted - Incoming traffic must match the IP address of the outgoing connection. Address.+.Port.Restriction - Incoming traffic must match the IP address and port of the outgoing connection. Enable Anti-Spoof Checking:

Enable this option to provide protection from certain kinds of spoofing attacks. Enable DMZ Host:

If an application has trouble working from behind the router, you can expose one computer to the Internet and run the application on that computer. Note: Placing a computer in the DMZ may expose that computer to a variety of security risks. Use of this option is only recommended as a last resort. IP Address:

Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. If this computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the System.>.Network. Settings page so that the IP address of the DMZ machine does not change. D-Lnk DIR-615 User Manual

6 Secton  - Configuraton Routing This page allows you to specify custom routes that determine how data is moved around your network. Routing List:

Each Route has a checkbox next to it, check the box of the route you wish to enable. Name:

Specify a name for identification of this route. Destination IP:

Enter the address of the host or network you wish to access. Netmask:

This field identifies the portion of the destination IP in use. Gateway:

The IP address of the router will be displayed here. D-Lnk DIR-615 User Manual



Secton  - Configuraton Advanced Wireless Settings Transmit Power:

Set the transmit power of the antennas. Beacon Period:

Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. RTS Threshold:

This value should remain at its default setting of 2432. If inconsistent data flow is a problem, only a minor modification should be made. Fragmentation Threshold:

The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding the 2346 byte setting will be fragmented before transmission. 2346 is the default setting. DTIM Interval:

(Delivery Traffic Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages. WLAN Partition:

This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it. WMM Enable:

WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. Short GI:

Check this box to reduce the guard interval time therefore increasing the data capacity. However, its less reliable and may create higher data loss. D-Lnk DIR-615 User Manual



Secton  - Configuraton Advanced Network Settings UPnP Settings:

To use the Universal Plug and Play (UPnP) feature click on Enabled. UPNP provides compatibility with networking equipment, software and peripherals. WAN Ping:

Unchecking the box will not allow the DIR-615 to respond to pings. Blocking the Ping may provide some extra security from hackers. Check the box to allow the Internet port to be pinged. WAN Port Speed:

You may set the port speed of the Internet port to 10Mbps, 100Mbps, or auto. Some older cable or DSL modems may require you to set the port speed to 10Mbps. Multicast Streams:

Check the box to allow multicast traffic to pass through the router from the Internet. UPnP Internet Ping Block Internet Port Speed Multicast Streams D-Lnk DIR-615 User Manual



Secton  - Configuraton IPv6 Link-Local Connectivity My IPv6 Connection:

Select Link-Local.Only from the drop-down menu. LAN IPv6 Address Settings:

Displays the IPv6 address of the router. D-Lnk DIR-615 User Manual 50 Secton  - Configuraton Static IPv6 (Stateful) My IPv6 Connection:

Select Static. IPv6 from the drop-down menu. WAN IPv6 Address Settings:

Enter the address settings supplied by your Internet provider (ISP). LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateful. (DHCPv6) or Stateless. Refer to the next page for Stateless. IPv6 Address Range Start:

Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End:

Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime:

Enter the IPv6 Address Lifetime (in minutes). D-Lnk DIR-615 User Manual 51 Secton  - Configuraton Static IPv6 (Stateless) My IPv6 Connection:

Select Static. IPv6 from the drop-down menu. WAN IPv6 Address Settings:

Enter the address settings supplied by your Internet provider (ISP). LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateless. Refer to the previous page for Stateful. Router Advertisement Lifetime:

Enter the Router Advertisement Lifetime (in minutes). D-Lnk DIR-615 User Manual 5

Secton  - Configuraton DHCPv6 (Stateful) My IPv6 Connection:

Select DHCPv6 from the drop-down menu. IPv6 DNS Settings:

Select either Obtain.DNS.server.address. automatically or Use.the.following.DNS. Address. Primary/Secondary DNS Address:

Enter the primary and secondary DNS server addresses. LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateful. (DHCPv6) or Stateless. Refer to the next page for Stateless. IPv6 Address Range Start:

Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End:

Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime:

Enter the IPv6 Address Lifetime (in minutes). D-Lnk DIR-615 User Manual 5

Secton  - Configuraton DHCPv6 (Stateless) My IPv6 Connection:

Select DHCPv6 from the drop-down menu. IPv6 DNS Settings:

Select either Obtain.DNS.server.address. automatically or Use.the.following.DNS. Address. Primary/Secondary DNS Address:

Enter the primary and secondary DNS server addresses. LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateless. Refer to the previous page for Stateful. Router Advertisement Lifetime:

Enter the Router Advertisement Lifetime (in minutes). D-Lnk DIR-615 User Manual 5

Secton  - Configuraton IPv6 over PPPoE (Stateful) My IPv6 Connection:

Select PPPoE from the drop-down menu. PPPoE:

Enter the PPPoE account settings supplied by your Internet provider (ISP). Address Mode:

Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. IP Address:

Enter the IP address (Static PPPoE only). User Name:

Enter your PPPoE user name. Password:

Enter your PPPoE password and then retype the password in the next box. Service Name:

Enter the ISP Service Name (optional). Reconnection Mode:

Select either Always-on, On-Demand, or Manual. Maximum Idle Time:

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. IPv6 DNS Settings:

Select either Obtain.DNS.server.address.automatically or Use.the.following.DNS.Address. Primary/Secondary DNS Address:

Enter the primary and secondary DNS server addresses. LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. D-Lnk DIR-615 User Manual 55 Secton  - Configuraton Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateful.(DHCPv6) or Stateless. Refer to the next page for Stateless. IPv6 Address Range Start:

Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End:

Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime:

Enter the IPv6 Address Lifetime (in minutes). D-Lnk DIR-615 User Manual 56 Secton  - Configuraton IPv6 over PPPoE (Stateless) My IPv6 Connection:

Select PPPoE from the drop-down menu. PPPoE:

Enter the PPPoE account settings supplied by your Internet provider (ISP). Address Mode:

Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. IP Address:

Enter the IP address (Static PPPoE only). User Name:

Enter your PPPoE user name. Password:

Enter your PPPoE password and then retype the password in the next box. Service Name:

Enter the ISP Service Name (optional). Reconnection Mode:

Select either Always-on, On-Demand, or Manual. Maximum Idle Time:

Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. IPv6 DNS Settings:

Select either Obtain.DNS.server.address.automatically or Use.the.following.DNS.Address. Primary/Secondary DNS Address:

Enter the primary and secondary DNS server addresses. LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. D-Lnk DIR-615 User Manual 5

Secton  - Configuraton Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateful.(DHCPv6) or Stateless. Router Advertisement Lifetime:

Enter the Router Advertisement Lifetime (in minutes). D-Lnk DIR-615 User Manual 5

Secton  - Configuraton 6 to 4 Tunneling (Stateful) My IPv6 Connection:

Select 6.to.4 from the drop-down menu. 6 to 4 Settings:

Enter the IPv6 settings supplied by your Internet provider (ISP). Primary/Secondary DNS Address:

Enter the primary and secondary DNS server addresses. LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Enable Autoconfiguration:

Displays the Routers LAN Link-Local Address. Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateful.(DHCPv6) or Stateless. Refer to the next page for Stateless. IPv6 Address Range Start:

Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End:

Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime:

Enter the IPv6 Address Lifetime (in minutes). D-Lnk DIR-615 User Manual 5

Secton  - Configuraton 6 to 4 Tunneling (Stateless) My IPv6 Connection:

Select 6.to.4 from the drop-down menu. 6 to 4 Settings:

Enter the IPv6 settings supplied by your Internet provider (ISP). Primary/Secondary DNS Address:

Enter the primary and secondary DNS server addresses. LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateless. Refer to the previous page for Stateful. Router Advertisement Lifetime:

Enter the Router Advertisement Lifetime (in minutes). D-Lnk DIR-615 User Manual 60 Secton  - Configuraton IPv6 in IPv4 Tunneling (Stateful) My IPv6 Connection:

Select IPv6.in.IPv4.Tunnel from the drop-down menu. IPv6 in IPv4 Tunnel Settings:

Enter the settings supplied by your Internet provider (ISP). LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateful. Refer to the previous page for Stateful. IPv6 Address Lifetime:

Enter the Router Advertisement Lifetime (in minutes). D-Lnk DIR-615 User Manual 61 Secton  - Configuraton IPv6 in IPv4 Tunneling (Stateless) My IPv6 Connection:

Select IPv6.in.IPv4.Tunnel from the drop-down menu. IPv6 in IPv4 Tunnel Settings:

Enter the settings supplied by your Internet provider (ISP). LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateful.(DHCPv6) or Stateless. Refer to the next page for Stateless. IPv6 Address Range Start:

Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End:

Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime:

Enter the IPv6 Address Lifetime (in minutes). D-Lnk DIR-615 User Manual 6

Secton  - Configuraton Stateless Autoconfiguration (Stateless) My IPv6 Connection:

Select Stateless.Autoconfiguration from the drop-down menu. IPv6 DNS Settings:

Enter the settings supplied by your Internet provider (ISP). LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateless. Refer to the previous page for Stateful. IPv6 Address Lifetime:

Enter the Router Advertisement Lifetime (in minutes). D-Lnk DIR-615 User Manual 6

Secton  - Configuraton Stateless Autoconfiguration (Stateful) My IPv6 Connection:

Select Stateless.Autoconfiguration from the drop-down menu. IPv6 DNS Settings:

Enter the settings supplied by your Internet provider (ISP). LAN IPv6 Address:

Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:

Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:

Check to enable the Autoconfiguration feature. Autoconfiguration Type:

Select Stateful. Refer to the previous page for Stateful. IPv6 Address Lifetime:

Enter the Router Advertisement Lifetime (in minutes). D-Lnk DIR-615 User Manual 6

Secton  - Configuraton Administrator Settings This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords. Admin Password:

Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. User Password:

Enter the new password for the User login. If you login as the User, you can only see the settings, but cannot change them. Gateway Name:

Enter a name for the DIR-615 router. Enable Graphical Authentication:

Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your routers network settings. Enable HTTPS Server:

Enable Remote Management:

Remote Admin Inbound Filter:

Check to enable HTTPS to connect to the router securely. Remote management allows the DIR-615 to be configured from the Internet by a web browser. A username and password is still required to access the Web-Management interface. In general, only a member of your network can browse the built-in web pages to perform Administrator tasks. This feature enables you to perform Administrator tasks from the remote (Internet) host. The port number used to access the DIR-615. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-615 and 8080 is the port used for the Web Management interface. If you have enabled HTTPS.Server and checked Use.HTTPS, you must enter https:// as part of the URL to access the router remotely. Remote Management Change Password Details:

This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. D-Lnk DIR-615 User Manual 65 Secton  - Configuraton Time Settings The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed. Time Zone:

Select the Time Zone from the drop-down menu. Daylight Saving:

To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time. Enable NTP Server:

NTP is short for Network Time Protocol. NTP synchronizes computer clock times in a network of computers. Check this box to use a NTP server. This will only connect to a server on the Internet, not a local server. NTP Server Used:

Enter the NTP server or select one from the drop-down menu. Manual:

To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set.Time. You can also click Copy.Your.Computers.Time. Settings. D-Lnk DIR-615 User Manual 66 Secton  - Configuraton SysLog The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your network. Enable Logging to SysLog Server:

Check this box to send the router logs to a SysLog Server. SysLog Server IP Address:

The address of the SysLog server that will be used to send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Lnk DIR-615 User Manual 6

Secton  - Configuraton E-mail Settings The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your e-mail address. Enable Email Notification:

When this option is enabled, router activity logs are e-mailed to a designated e-mail address. From Email Address:

This e-mail address will appear as the sender when you receive a log file or firmware upgrade notification via e-mail. To Email Address:

Enter the e-mail address where you want the e-mail sent. SMTP Server Address:

Enter the SMTP server address for sending e-mail. If your SMTP ser ver requires authentication, select this option. Enable Authentication:

Check this box if your SMTP server requires authentication. Account Name:

Enter your account for sending e-mail. Password:

Enter the password associated with the account. Re-type the password associated with the account. On Log Full:

When this option is selected, logs will be sent via e-mail when the log is full. On Schedule:

Selecting this option will send the logs via e-mail according to schedule. Schedule:

This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create a schedule, go to Tools.>.Schedules. D-Lnk DIR-615 User Manual 6

Secton  - Configuraton System Settings Save Settings to Local Hard Drive:

Use this option to save the current router configuration settings to a file on the hard disk of the computer you are using. First, click the Save button. You will then see a file dialog, where you can select a location and file name for the settings. Load Settings from Local Hard Drive:

Use this option to load previously saved router configuration settings. First, use the Browse control to find a previously save file of configuration settings. Then, click the Load button to transfer those settings to the router. Restore to Factory Default Settings:

This option will restore all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device:

Click to reboot the router. D-Lnk DIR-615 User Manual 6

Secton  - Configuraton Update Firmware You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site. Firmware Upgrade:

Click on Check. Online. Now. for. Latest. Firmware.Version to find out if there is an updated firmware; if so, download the new firmware to your hard drive. Browse:

After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. Click Upload to complete the firmware upgrade. Notifications Options:

Check Automatically.Check.Online.for.Latest. Firmware.Version to have the router check automatically to see if there is a new firmware upgrade. Check Email.Notification .of.Newer.Firmware. Version to have the router send an e-mail when there is a new firmware available. D-Lnk DIR-615 User Manual

0

Secton  - Configuraton DDNS The DDNS feature allows you to host a server (Web, FTP, Game Server, etc) using a domain name that you have purchased (www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to your server no matter what your IP address is. DDNS:

Dynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. Check the box to enable DDNS. Server Address:

Choose your DDNS provider from the drop down menu. Host Name:

Enter the Host Name that you registered with your DDNS service provider. Username or Key:

Enter the Username for your DDNS account. Password or Key:

Enter the Password for your DDNS account. Timeout:

Enter a time (in hours). Status:

Displays the current connection status to your DDNS server. D-Lnk DIR-615 User Manual

1 Secton  - Configuraton System Check Ping Test:

The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. Ping Results:

The results of your ping attempts will be displayed here. D-Lnk DIR-615 User Manual



Secton  - Configuraton Schedules Name:

Enter a name for your new schedule. Days:

Select a day, a range of days, or All Week to include every day. Time:

Check All.Day.-.24hrs or enter a start and end time for your schedule. Save:

Click Save to save your schedule. You must click Save Settings at the top for your schedules to go into effect. Schedule Rules List:

The list of schedules will be listed here. Click the Edit icon to make changes or click the Delete icon to remove the schedule. D-Lnk DIR-615 User Manual



Secton  - Configuraton Device Information This page displays the current information for the DIR-615. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection. See the following page for more information. D-Lnk DIR-615 User Manual



Secton  - Configuraton General:

Displays the routers time and firmware version. WAN:

Displays the MAC address and the public IP settings for the router. LAN:

Displays the MAC address and the private (local) IP settings for the router. Wireless LAN:

Displays the wireless MAC address and your wireless settings such as SSID and Channel. LAN Computers:

Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). IGMP Multicast Memberships:

Displays the Multicast Group IP Address. D-Lnk DIR-615 User Manual

5 Secton  - Configuraton Log The router automatically logs (records) events of possible interest in its internal memory. If there isnt enough internal memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types of events you want to view and the level of the events to view. This router also has external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility. What to View:

You can select the types of messages that you want to display from the log. Firewall & Security, System, and Router Status messages can be selected. View Levels:

There are three levels of message importance:

Informational, Warning, and Critical. Select the levels that you want displayed in the log. Apply Log Settings:

Will filter the log results so that only the selected options appear. Refresh:

Updates the log details on the screen so it displays any recent activity. Clear:

Clears all of the log contents. Email Now:

This option will send a copy of the router log to the e-mail address configured in the Tools. >. Email. Settings screen. Save Log:

This option will save the router to a log file on your computer. D-Lnk DIR-615 User Manual

6 Secton  - Configuraton Stats The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-615 on both the Internet and the LAN ports. The traffic counter will reset if the device is rebooted. D-Lnk DIR-615 User Manual



Secton  - Configuraton Internet Sessions The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. Local:

The IP address and, where appropriate, port number of the local application. NAT:

The port number of the LAN-side application as viewed by the WAN-side application. Internet:

The IP address and, where appropriate, port number of the application on the Internet. Protocol:

The communications protocol used for the conversation. State:

State for sessions that use the TCP protocol:

NO: None -- This entry is used as a placeholder for a future connection that may occur. SS: SYN Sent -- One of the systems is attempting to start a connection. EST: Established -- the connection is passing data. FW: FIN Wait -- The client system has requested that the connection be stopped. CW: Close Wait -- The server system has requested that the connection be stopped. TW: Time Wait -- Waiting for a short time while a connection that was in FIN Wait is fully closed. LA: Last ACK -- Waiting for a short time while a connection that was in Close Wait is fully closed. CL: Closed -- The connection is no longer active but the session is being tracked in case there are any retransmitted packets still pending. Dir:

The direction of initiation of the conversation:

. Out - Initiated from LAN to WAN. In - Initiated from WAN to LAN. D-Lnk DIR-615 User Manual



Secton  - Configuraton Priority:

The preference given to outbound packets of this conversation by the QoS Engine logic. Smaller numbers represent higher priority. Time Out:

The number of seconds of idle time until the router considers the session terminated. The initial value of Time Out depends on the type and state of the connection. 300.seconds - UDP connections. 240.seconds - Reset or closed TCP connections. The connection does not close instantly so that lingering packets can pass or the connection can be re-established. 7800.seconds - Established or closing TCP connections. D-Lnk DIR-615 User Manual



Secton  - Configuraton Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. D-Lnk DIR-615 User Manual

0 Secton  - Configuraton IPv6 This screen will display all of your IPv6 internet and network connection details are displayed on this page. D-Lnk DIR-615 User Manual

1 Secton  - Configuraton Support D-Lnk DIR-615 User Manual



Secton  - Securty Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-615 offers the following types of security:

WPA2 (Wi-Fi Protected Access 2) WPA (Wi-Fi Protected Access) WPA2-PSK(Pre-Shared Key) WPA-PSK (Pre-Shared Key) What is WPA?

WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP:

Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys havent been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. User authentication, which is generally missing in WEP, through the extensible authentication protocol

(EAP). WEP regulates access to a wireless network based on a computers hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Lnk DIR-615 User Manual



Secton  - Securty Wireless Connection Setup Wizard To run the security wizard, browse to the Setup page and then click the Wireless.Connection.Setup.Wizard.button. D-Lnk DIR-615 User Manual



Secton  - Securty Enter the SSID (Service Set Identifier). The SSID is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive. Select Automatically and click Next. Once this screen appears, the setup is complete. You will be given a detailed summary of your wireless security settings. Click Save to continue. D-Lnk DIR-615 User Manual

5 Secton  - Securty Enter the SSID (Service Set Identifier). The SSID is the name of your wireless network. Create a name using up to 32 characters. The SSID is case-sensitive. Select Manually and click on Next. Select a wireless security password. It must be exactly 5 or 13 characters. It must also be exactly 10 or 26 characters using 0-9 and A-F. Click Next to continue. Your Setup is complete. You will be given a detailed summary of your wireless security settings. Click Save to finish the Security Wizard. D-Lnk DIR-615 User Manual

6 Secton  - Securty Add Wireless Device with WPS Wizard From the Setup > Wireless. Settings screen, click Add. Wireless.Device.with.WPS. Select Auto to add a wireless client using WPS (Wi-Fi Protected Setup). Once you select Auto.and click.Connect, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection. If you select Manual, a settings summary screen will appear. Write down the security key and enter this on your wireless clients. PIN: Select this option to use PIN method. In order to use this method you must know the wireless clients 8 digit PIN and click Connect. PBC:.Select this option to use PBC (Push Button) method to add a wireless client. Click Connect. D-Lnk DIR-615 User Manual



Secton  - Securty Configure WPA-Personal (PSK) It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1..Log into the web-based configuration by opening a web browser and entering the IP address of the router

(192.168.0.1). Click on. Setup. and then click.Wireless. Settings on the left side. 2. Next to Security Mode, select WPA-Personal. 3. Next to WPA Mode, select Auto, WPA2.Only, or.WPA.Only. Use Auto if you have wireless clients using both WPA and WPA2. 4. Next to Cypher Type, select TKIP.and.AES, TKIP, or AES. If you have wireless clients that use both types, use TKIP. and.AES. 5. Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is changed (3600 is default). 6. Next to Pre-Shared Key, enter a key (passphrase). The key is entered as a pass-phrase in ASCII format at both ends of the wireless connection. The pass-phrase must be between 8-63 characters. 7. Click Save.Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router. D-Lnk DIR-615 User Manual



Secton  - Securty Configure WPA-Enterprise (RADIUS) It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead. 1..Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on.Setup.and then click.Wireless.Settings on the left side. 2. Next to Security Mode, select WPA-Enterprise. Note: The user must disable Wi-Fi Protected Setup in order to select WPA-Enterprise. 3. Next to WPA Mode, select Auto, WPA2.Only, or.WPA.Only. Use Auto if you have wireless clients using both WPA and WPA2. 4. Next to Cypher Type, select TKIP.and.AES, TKIP, or AES. If you have wireless clients that use both types, use TKIP.and.AES. 5. Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is changed (3600 is default). 6. Next to Authentication Timeout, enter the amount of time before a client is required to re-authenticate (60 minutes is default). 7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server. D-Lnk DIR-615 User Manual



Secton  - Securty 8. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port. 9. Next to RADIUS Server Shared Secret, enter the security key. 10. If the MAC Address Authentication box is selected then the user will need to connect from the same computer whenever logging into the wireless network. 11. Click Advanced to enter settings for a secondary RADIUS Server. 12. Click Apply.Settings to save your settings. D-Lnk DIR-615 User Manual

0 Secton 5 - Connectng to a Wreless Network Connect to a Wireless Network Using Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another companys utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless.Networks.Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray

(lower-right corner next to the time). Select Connect. to. a. network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking. Basics section in this manual for more information. D-Lnk DIR-615 User Manual

1 Secton 5 - Connectng to a Wreless Network Configure WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1..Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect.to.a.network. 2..Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Lnk DIR-615 User Manual



Secton 5 - Connectng to a Wreless Network 3. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Lnk DIR-615 User Manual



Secton 5 - Connectng to a Wreless Network Connect Using WCN 2.0 The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista. The following instructions for setting this up depends on whether you are using Windows Vista to configure the router or third party software. When you first set up the router, Wi-Fi protection is disabled and unconfigured. To enjoy the benefits of Wi-Fi protection, the router must be both enabled and configured. There are three basic methods to accomplish this: use Windows Vistas built-in support for WCN 2.0, use software provided by a third party, or manually configure. If you are running Windows Vista, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the Current PIN that is displayed on the Advanced > Wi-Fi.Protected.Setup section or choose to click the Generate. New.PIN button or Reset.PIN.to.Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Lnk DIR-615 User Manual



Secton 5 - Connectng to a Wreless Network Using Windows XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another companys utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows XP utility as seen below. If you receive the Wireless.Networks.Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray

(lower-right corner next to the time). Select View.Available. Wireless.Networks. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking. Basics section in this manual for more information. D-Lnk DIR-615 User Manual

5 Secton 5 - Connectng to a Wreless Network Configure WPA-PSK It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used. 1..Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray

(lower-right corner of screen). Select View. Available. Wireless.Networks. 2..Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Lnk DIR-615 User Manual

6 Secton 5 - Connectng to a Wreless Network 3. The Wireless. Network. Connection box will appear. Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Lnk DIR-615 User Manual



Secton 6 - Troubleshootng Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-615. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows XP. If you have a different operating system, the screen shots on your computer will look similar to the following examples.) 1..Why.cant.I.access.the.web-based.configuration.utility?

When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:

Internet Explorer 6 or higher Netscape 8 or higher Mozilla 1.7.12 (5.0) or higher Opera 8.5 or higher Safari 3 or higher Camino 0.8.4 or higher Firefox 3.0 or higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any Internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Lnk DIR-615 User Manual



Secton 6 - Troubleshootng Configure your Internet settings:

Go to Start > Settings > Control.Panel. Double-click the Internet.Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2..What.can.I.do.if.I.forgot.my.password?

If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. D-Lnk DIR-615 User Manual



Secton 6 - Troubleshootng 3..Why.cant.I.connect.to.certain.sites.or.send.and.receive.e-mails.when.connecting.through.my.router?. If you are having a problem sending or receiving e-mail, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). Note:.AOL.DSL+.users.must.use.MTU.of.1400.. To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL. Click on Start and then click Run. Windows 95, 98, and Me users type in command (Windows NT, 2000, and XP users type in cmd) and press Enter.(or click OK). Once the window opens, youll need to do a special ping. Use the following syntax:

. ping.[url].[-f].[-l].[MTU.value]

Example: ping.yahoo.com.-f.-l.1472 D-Lnk DIR-615 User Manual 100 Secton 6 - Troubleshootng You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network were working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router follow the steps below:

Open your browser, enter the IP address of your router (192.168.0.1) and click OK. Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. Click on Setup and then click Manual.Configure . To change the MTU enter the number in the MTU field and click Save.Settings to save your settings. Test your e-mail. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Lnk DIR-615 User Manual 101 Appendx A - Wreless Bascs Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Lnk DIR-615 User Manual 10

Appendx A - Wreless Bascs What.is.Wireless?

Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. Why.D-Link.Wireless?

D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How.does.wireless.work?

Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Wireless.Local.Area.Network.(WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. D-Lnk DIR-615 User Manual 10

Appendx A - Wreless Bascs Wireless.Personal.Area.Network.(WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who.uses.wireless?. Wireless technology as become so popular in recent years that almost everyone is using it, whether its for home, office, business, D-Link has a wireless solution for it. Home Gives everyone at home broadband access Surf the web, check e-mail, instant message, and etc Gets rid of the cables around the house Simple and easy to use Small.Office.and.Home.Office Stay on top of everything at home as you would at office Remotely access your office network from home Share Internet connection and printer with multiple computers No need to dedicate office space D-Lnk DIR-615 User Manual 10

Appendx A - Wreless Bascs Where.is.wireless.used?. Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize.your.router.or.Access.Point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate.Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Lnk DIR-615 User Manual 105 Appendx A - Wreless Bascs Security Dont let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up. Wireless Modes There are basically two modes of networking:

Infrastructure All wireless clients will connect to an access point or wireless router. Ad-Hoc Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more DIR-615 wireless network Cardbus adapters. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Lnk DIR-615 User Manual 106 Appendx B - Networkng Bascs Networking Basics Check your IP address After you install your adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server

(i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows Vista users type cmd in the Start.Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Lnk DIR-615 User Manual 10

Appendx B - Networkng Bascs Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:

Step.1 Windows Vista - Click on Start > Control.Panel > Network.and.Internet > Network.and.Sharing.Center > Manage. Windows XP -

Windows 2000 - From the desktop, right-click My.Network.Places > Properties. Network.Connections. Click on Start > Control.Panel > Network.Connections. Step.2 Right-click on the Local.Area.Connection which represents your network adapter and select Properties. Step.3 Highlight Internet.Protocol.(TCP/IP) and click Properties. Step.4 Click Use.the.following.IP.address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step.5 Click OK twice to save your settings. D-Lnk DIR-615 User Manual 10

Technical Specifications Appendx C - Techncal Specficatons Standards IEEE 802.11n (draft 2.0) IEEE 802.11g IEEE 802.3 IEEE 802.3u Security WPA-Personal WPA2-Personal WPA-Enterprise WPA2-Enterprise Wireless.Signal.Rates*

. 108Mbps 54Mbps 36Mbps 18Mbps 11Mbps 6Mbps 2Mbps 48Mbps 24Mbps 12Mbps 9Mbps 5.5Mbps 1Mbps MSC.(0-15) 130Mbps (270) 104Mbps (216) 66Mbps (135) 52Mbps (108) 26Mbps (54) 12Mbps (27) 117Mbps (243) 78Mbps (162) 58.5Mbps (121.5) 39Mbps (81) 19.5Mbps (40.5) 6.5Mbps (13.5) Frequency.Range 2.4GHz to 2.483GHz Transmitter.Output.Power 25dBm LEDs Power WLAN Internet LAN (10/100) Operating.Temperature 32F to 104F ( 0C to 40C) Humidity 95% maximum (non-condensing) Safety.&.Emissions FCC IC CE Dimensions L = 7.6 inches W = 4.6 inches H = 1.2inches Warranty 1 Year Limited

* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Lnk DIR-615 User Manual 10

Appendx D - Contactng Techncal Support Contacting Technical Support U.S. and Canadian customers can contact D-Link technical support through our web site or by phone. Before you contact technical support, please have the following ready:

Model number of the product (e.g. DIR-615) Hardware Revision (located on the label on the bottom of the router (e.g. rev C1)) Serial Number (s/n number located on the label on the bottom of the router). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues. For.customers.within.the.United.States:

For.customers.within.Canada:

Phone.Support:

(877) 453-5465 Internet.Support:

http://support.dlink.com Phone.Support:

(800) 361-5265 Internet.Support:

http://support.dlink.com D-Lnk DIR-615 User Manual 110 Appendx E - Warranty Warranty Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (D-Link) provides this Limited Warranty:

Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions or Protectorates, U.S. Military Installations, or addresses with an APO or FPO. Limited.Warranty:

D-Link warrants that the hardware portion of the D-Link product described below (Hardware) will be free from material defects in workmanship and materials under normal use from the date of original retail purchase of the product, for the period set forth below

(Warranty Period), except as otherwise stated herein. Hardware (excluding power supplies and fans): One (1) year limited Power supplies and fans: One (1) year limited Spare parts and spare kits: Ninety (90) days The customers sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Links option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety

(90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Lnk DIR-615 User Manual 111 Appendx E - Warranty Limited.Software.Warranty:

D-Link warrants that the software portion of the product (Software) will substantially conform to D-Links then current functional specifications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety

(90) days (Software Warranty Period), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customers sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Links option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Links functional specifications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Replacement Software will be warranted for the remainder of the original Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates. Non-Applicability.of.Warranty:

The Limited Warranty provided hereunder for Hardware and Software portions of D-Links products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold As-Is without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary. Submitting.A.Claim:

The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:

The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered. The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization (RMA) number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.com/. D-Lnk DIR-615 User Manual 11

Appendx E - Warranty After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (COD) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Links reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming. What.Is.Not.Covered:

The Limited Warranty provided herein by D-Link does not cover:

Products that, in D-Links judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product. While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty. Disclaimer.of.Other.Warranties:

EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED AS-IS WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. D-Lnk DIR-615 User Manual 11

Appendx E - Warranty IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. Limitation.of.Liability:

TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINKS PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY. Governing.Law:

This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state. Trademarks:

D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners. Copyright.Statement:

No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright 2008-2009 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Lnk DIR-615 User Manual 11

Appendx E - Warranty CE.Mark.Warning:

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC.Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. FCC.Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT.NOTE:

FCC.Radiation.Exposure.Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. We declare that the product is limited in CH1~CH11 by specified firmware controlled in the USA. D-Lnk DIR-615 User Manual 115 Appendx E - Warranty IC.statement Operation is subject to the following two conditions:

1) This device may not cause interference and 2) This device must accept any interference, including interference that may cause undesired operation of the device. This device has been designed to operate with an antenna having a maximum gain of 2dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. IMPORTANT.NOTE:

IC.Radiation.Exposure.Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Rglement.dIndustry.Canada. Les conditions de fonctionnement sont sujettes deux conditions:

1) Ce priphrique ne doit pas causer dinterfrence et. 2) Ce priphrique doit accepter toute interfrence, y compris les interfrences pouvant perturber le bon fonctionnement de ce priphrique. The Class [B] digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. Cet appareil numerique de la class [B] respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. D-Lnk DIR-615 User Manual 116 Appendx F - Regstraton Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. D-Lnk DIR-615 User Manual 11

Version 3.1 July 18, 2009

No.289, Sinhu 3rd Rd., Neihu District, Taipel-City 114, Taiwan, R.O.C.. TEL.:+ 886-2-66000123 FAX:+ 886-2-55509988 Date: 2010-01-12 General Declaration We, D-Link Corporation declares that the device does not have Ad Hoc on non-US frequencies and/or on DFS frequencies while applying for the following product. Trademark: D-Link Model name: DIR-615 FCC ID: KA2IR615E3 If you have any questions regarding the declaration; please dont hesitate to contact US. Thank you!

Sincerely yours, Shinglin Chung / Director D-Link Corporation TEL.:+ 886-2-66000123 # 5819 FAX:+ 886-2-55509988 E-mail: shinglin_chung@dlink.com.tw

No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C. TEL.:+ 886-2-66000123 FAX:+ 886-2-55509988 Date:2010-01-12 FCC ID: KA2IR615E3 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission's Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below:

Schematics Block Diagram The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely,

Shinglin Chung / Director D-Link: Corporation TEL.:+ 886-2-66000123 # 5819 FAX:+ 886-2-55509988 E-mail: shinglin_chung@dlink.com.tw

No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C. -. TEL.:+ 886-2-66000123 FAX:+ 886-2-55509988 AUTHORIZATION LETTER Date:2009-11-13 To whom it may concern:

We, the undersigned D-Link Corporation hereby authorize Bureau Veritas Consumer Products Services (H:K.) Ltd., Taoyuan Branch (BV CPS Taoyuan) of Taiwan to act on our behalf in all matters relating to all processes required in FCC Part 15C and any communication needed with the national authority. Any and all acts carried out

- by BV CPS Taoyuan on our behalf shail have the same effects as acts of our own. lf you have any questions regarding the authorization, please dont hesitate to contact us. Thank you!

Sincerely yours, Shinglin Chung / Director D-Link Corporation TEL.:+ 886-2-66000123 # 5819 FAX:+ 886-2-55509988 E-mail: shinglin_chung@dlink.com.tw

D-Link No.289, Sinhu 3rd Ra., Neihu District, Taipei City 114, Tarwan, R.O.C September 24, 2008 Power of Attorney To whom it may concem:

|, the undersigned, Michael Boschma, hereby authorize the persons listed below to actin behalf of me to sign all related documents for D-Links FCC application. Wireless Shinglin Chung'Senior manager Broad Band Jacob LuolSenior Director

+886-2.6500012345819 +886-2-66000123#6810 shinglin_chung@link com tw jacob_luo@dlink com tw Digital home Robert LivSenior Director Switch & Henghsn Liaa/ASsocate Vive President

+4888-2-66000123#5720 secutty product +886-2-6600012385810 robert_in@link.com.tw hhenghsin_tiao@link com.tw Company Name: D-Link Co, Lid Fax. 886-2-55509988 Company Address: No.289,Sinhu 3 Rd, Neihu District, Taipei City 114, Taiwan, R.O.C. Authorization period: Jan 1, 2008 ~Dec 31", 2058 Should you have any question regarding this power of attorney, please don't hesitate to contact me. Sincerely 9-2b-08 Michael Bosehma D-Link Co. TEL: (714) 886-6000 FAX: (949) 272-4629 E-maiiMbeschma@dlink com

FCC ID: KA2IR615E3 Operational Description This device is a D-Link DIR-615 Wireless N Router, which operates in the 2.4GHz frequency spectrum with throughput of up to 270Mbps which OFDM technique will be applied. If the signal to noise radio is too poor which could not support 270Mbps, the 11Mbps data rate with DSSS technique will be applied. The transmitter of the EUT is powered by AC adapter. The antenna is dipole antenna without connector(fixed antenna) or with R-SMA connector(detachable antenna). The other instruction, please have a look at the users manual. Report No.: RF981223L08