FCC ID: KA2WR710B1 HSPA+ Le Petit Router

Version 1.0 | 10/18/2013 User Manual HSPA+ Le Petit Router DWR-710 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision 1.0 Date Description January 15, 2014 Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright 2014 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. D-Link DWR-710 User Manual i Table of Contents Table of Contents Preface.................................................................................. i Manual Revisions ........................................................................... i Trademarks ...................................................................................... i Product.Overview...............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 1 Introduction ................................................................................... 2 Hardware Overview ..................................................................... 3 Left Side.................................................................................... 3 Installation..........................................................................4 Connecting to Your Network .................................................... 4 Inserting a microSD Card ........................................................... 4 Driver Installation ......................................................................... 5 Wireless Installation Considerations ...................................... 6 Configuration......................................................................7 Initial Connection to the Router ............................................. 7 Connect via USB .................................................................... 7 Connect via Wi-Fi .................................................................. 8 Web-based Configuration .......................................................10 Configuration Utility ..........................................................10 Home ..............................................................................................11 Navigation .............................................................................11 Device Status ........................................................................12 Home .......................................................................................13 Wizard .............................................................................................14 Internet ...........................................................................................16 Connection ...........................................................................16 2G/3G Modem .....................................................................18 SIM ...........................................................................................19 PLMN .......................................................................................20 Network .........................................................................................21 Wi-Fi .........................................................................................22 DHCP .......................................................................................23 NAT ...........................................................................................24 SMS ..................................................................................................26 New Message .......................................................................26 Local ........................................................................................26 Wi-Fi .................................................................................................27 Basic .........................................................................................27 Wireless Security .................................................................29 Wired Equivalent Privacy (WEP) ...............................29 Wi-Fi Protected Access (WPA) ....................................30 WLAN Authentication and Privacy Infrastructure

(WAPI).................................................................................31 Wi-Fi Protected Setup (WPS) .....................................32 MAC Filter ..............................................................................33 Station Lists ...........................................................................34 Security ..........................................................................................35 Firewall ...................................................................................35 IP Filter ...............................................................................35 D-Link DWR-710 User Manual ii Check your IP address ...............................................................66 Statically Assign an IP address ...............................................67 Technical.Specifications...................................................68 Warnings.and.Declarations..............................................69 Table of Contents IPv6 Filter ..........................................................................36 MAC Filter .........................................................................37 DDOS ..................................................................................38 URL Filter ...........................................................................39 Application ...................................................................................40 About ......................................................................................40 Configuration .......................................................................41 Firmware Upgrade ..............................................................42 Standby Mode .....................................................................43 Password ................................................................................44 Date and Time ......................................................................45 Language ...............................................................................47 System Log ............................................................................48 Connecting.to.a.Wireless.Network..................................49 Using Windows 8 .......................................................................49 Connecting.to.a.Wireless.Network..................................51 Using Windows 7 .......................................................................51 Configuring Wireless Security ........................................53 Using Windows Vista ..............................................................56 Configuring Wireless Security ........................................57 Using Windows XP ....................................................................59 Configure WEP .....................................................................60 Configure WPA-PSK ............................................................62 Troubleshooting...............................................................64 Networking.Basics............................................................66 D-Link DWR-710 User Manual iii Section 1 - Product Overview Product Overview Package Contents D-Link DWR-710 HSPA+ Mobile Router Battery USB Cable If any of the above items are missing from your package, please contact your reseller. System Requirements A compatible (U)SIM card with mobile data service1 A computer a with Windows, Macintosh , or Linux-based operating systems Internet Explorer 8, Firefox 12.0, Chrome 20.0 , or Safari 4.0 1. Subject to services and service terms available from your carrier. D-Link DWR-710 User Manual 1 Section 1 - Product Overview Introduction The D-Link DWR-710 Le Petit HSPA+ Router lets you share a fast mobile Internet connection with multiple PCs and mobile devices wherever you go. It offers 3G HSPA+ compatibility for fast downlink and uplink data rates, so you get the high-speed upload and download speeds even when youre on the go. Set up a personal mobile network anywhere, anytime allowing you and those around you to access the Internet, and share files. High-Speed Mobile Internet with 3G Connectivity The DWR-710 Le Petit HSPA+ Router gives you high-speed access to the Internet wherever you are and lets you share it on the go. Using HSPA+

technology, you can achieve download speeds of up to 21.6 Mbps and upload speeds of up to 5.76 Mbps1. The built-in 3G antenna provides a reliable connection to your 3G service provider, and a separate Wi-Fi antenna gives extended coverage to the computers and mobile devices connected to the DWR-710. Mobile Internet for All of Your Devices The Le Petit HSPA+ Router lets you share your fast mobile connection over Wi-Fi from a device small enough to fit in your pocket. With the DWR-710, you can get online with your notebook, smartphone, tablet, or any other wireless device using a single 3G mobile connection. The DWR-710 provides high-speed Wireless N coverage to give high-speed wireless access to everybody whether you are with colleagues on a business trip, or travelling with friends and family. Built-in Software for Instant Access Anywhere The DWR-710 is truly plug and play, with drivers built right into the router so you can connect without the need to install anything. Open a browser, connect the router, and you can set up your network right from a web interface. This means that notebooks and netbooks without a CD-ROM drive can connect and get up and running in no time. Once the device is set up, you can simply power it on to start up your portable mobile network, meaning that you can share your mobile Internet connection without even needing a computer. Designed for True Portability The DWR-710 Le Petit HSPA+ Router is small and slim enough to carry around in your purse, bag, or pocket. It features a microSD card slot for optional removable storage (up to 32 GB), allowing you to always have your files and contacts on hand. 1 All references to speed are for comparison purposes only. Actual speeds will vary depending on a range of factors including mobile network coverage, signal strength, network activity, and environmental conditions. D-Link DWR-710 User Manual 2 Section 1 - Product Overview Hardware Overview Left Side USB Connector microSD Card Slot (under removable housing) microSD Card Slot micro USB Connector Use the included cable to connect to a powered USB port to charge the device, or to Insert a microSD Card (up to 32GB) to access and share files and media wherever you go. access the configuration utility. D-Link DWR-710 User Manual 3 Section 2 - Installation This section will guide you through the installation process. Installation Connecting to Your Network Remove the back cover. Slide your (U)SIM card into the slot provided, ensuring that the alignment is the same as indicated by the logo next to the slot. The gold contacts on the card should be facing downwards. D-Link will be displayed on the screen as the router performs its initialization processes. Caution: Always unplug and turn off the router before installing or removing the SIM card. Never insert or remove the SIM card while the router is in use. Inserting a microSD Card 1. Ensure that your DWR-710 Le Petit HSPA+ Router is not plugged in. 2. Remove the cover. 3. Insert the microSD card into the slot and push it in until it locks into place. D-Link DWR-710 User Manual 4 Section 2 - Installation Driver Installation When you plug the DWR-710 into your computer, any necessary drivers will immediately install (with your permission). Note: These drivers are Windows-only. Mac and Linux users will still be able to configure the DWR-710 using the web configuration utility described in Configuration Utility on page 10. D-Link DWR-710 User Manual 5 Section 2 - Installation Wireless Installation Considerations The DWR-710 can be accessed using a wireless connection from anywhere within the operating range of its wireless network. Keep in mind that the quantity, thickness, and location of walls, ceilings, or other objects that the wireless signals must pass through may adversely affect wireless signals. Ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or office. The key to maximizing the wireless range is to follow these basic guidelines:

1. Minimize the number of walls and ceilings between the router and other network devices. Each wall or ceiling can reduce your adapters range from 3 to 90 feet (1 to 30 meters). 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters) appears to be almost 3 feet (1 meter) thick at a 45-degree angle. At a 2-degree angle it appears over 42 feet (14 meters) thick. Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Try to position access points, wireless routers, and computers so that the signal passes through open doorways and drywall. Materials such as glass, metal, brick, insulation, concrete, and water can affect wireless performance. Large objects such as fish tanks, mirrors, file cabinets, metal doors, and aluminum studs may also have a negative effect on range. 4. If you are using a 2.4 GHz cordless phone, make sure that the 2.4 GHz phone base is as far away from your wireless device as possible. The base transmits a signal even if the phone is not in use. In some cases, cordless phones, X-10 wireless devices, and electronic equipment such as ceiling fans, fluorescent lights, and home security systems may dramatically degrade wireless connectivity. D-Link DWR-710 User Manual 6 Section 2 - Installation Configuration This section will show you how to configure your new D-Link mobile router using the configuration utility that can be obtained through a software interface or a web-based user interface. Initial Connection to the Router When configuring the router for the first time, you will need to establish a direct connection with the router in order to access the web-based configuration utility. This can be done by connecting the router to a powered USB port. Once you have configured your router, you will be able to connect using the Wi-Fi settings that you have specified in the configuration process. Ensure that the router is connected before commencing the setup process. To connect to the router via USB, plug the router into an available USB port on your computer. Your router is now ready for configuration, please refer to Configuration Utility on page 10 to continue the setup process. Connect via USB D-Link DWR-710 User Manual 7 Section 2 - Installation Connect via Wi-Fi Note: The following example uses Windows 7s built-in wireless connection utility. If you are using a different operating system, or a third party connection utility, the process may be different. Please refer to the documentation that came with your operating system or wireless client for further information on how to connect to a wireless network. To connect to the router using Wi-Fi, open your operating systems wireless networking utility and scan for available networks to connect to. By default, the network name (SSID) of the DWR-710 will be in the format dlink_DWR-710xxxx, where xxxx represents the last four characters of the routers MAC address. You will then be prompted to enter the network security key for your router. The unique security key for your router will be displayed on a sticker in the routers battery bay. Enter the security key in the box provided and click OK. Your wireless connection utility should confirm that the connection is successful, and you can move to the next step to continue to configuration process. D-Link DWR-710 User Manual 8 Section 2 - Installation Once you have located this network with your wireless utility, connect to the network using your wireless networking utility. D-Link DWR-710 User Manual 9 Section 3 - Configuration Web-based Configuration To access the configuration utility, open a web browser (such as Internet Explorer) and enter the IP address of the router, which is 192.168.0.1 by default. Configuration Utility Once you have reached the configuration utility through the installed software or your web browser, you will need to log in. Enter admin as the username, and then enter the password. By default, the password is blank. You can also select your language from the drop-down menu. Click Login to continue. D-Link DWR-710 User Manual 10 Section 3 - Configuration Home Navigation Throughout the interface you will find a menu bar at the top of the page which includes tabs for easy navigation, and a summary bar in the upper right corner with a quick view of essential information. Home The Home tab will return you the home page, where a summary of the system information is shown. Wizard:

Click on this tab to start the setup wizard, which will guide you through the basic setup process. Internet:

The Internet tab gives you Internet setup and settings options. Network:

The Network tab allows you to configure the network settings for your Local Area Network (LAN). SMS:

From the SMS you can view and send SMS messages via your mobile network. Wi-Fi:

The Wi-Fi allows you to configure your Wi-Fi network, as well as add new devices using WPS. Security:

The Security tab allows you to configure firewall and security settings to protect your network from WAN-side intrusions. Application:

From this tab, you can manage the administrative configuration of your router, such as time and date, firmware, language, and remote management. D-Link DWR-710 User Manual 11 Section 3 - Configuration Device Status A summary of the devices current status will be displayed on the information panel at the top of the right-hand side of the navigation bar. The following is a description of the indications, from left to right. SIM:

This icon shows whether or not a compatible (U)SIM card has been inserted into the device. SMS:

The number to the right of this icon indicates the number of unread messages in the SMS inbox. Signal Strength:

Indicates the current strength of the mobile network signal being received. Operator Name:

The name of the mobile network operator to which the device is currently connected. Roaming:

Indicates that the device is connected to a network other than your service providers home network. Internet:

Indicates that there is an Internet connection present. Wi-Fi Network:

Indicates that the routers Wi-Fi network is currently active. The number to the right of this icon indicates the number of wireless clients currently connected to the routers Wi-Fi network. Logout:

Click this button to log out of the configuration interface. D-Link DWR-710 User Manual 12 Section 3 - Configuration Home The Home page acts as a dashboard to quickly display your configuration settings and provide a summary of the current status of your networks status. System Resources:

This area displays the percentage of the routers memory and CPU currently being used by the system. LAN:

This area displays a summary of the current settings for the routers LAN. 2G/3G Modem:

This area shows the current status of your 2G or 3G mobile network connection. WAN:

This area displays a summary of the routers current WAN settings. These details will reflect the mobile network connection which is being received from the service provider. Traffic Statistics:

This area shows the amount of data which has been sent (TX) and received (RX) over the mobile network. This information may not reflect the amount recorded by your mobile service provider. D-Link DWR-710 User Manual 13 Section 3 - Configuration Wizard The Wizard page will guide you through the steps required to configure the basic settings of your router such as the IP address, network name

(SSID), and password. Click on the Wizard button on the navigation bar to commence the wizard. LAN CoNfigurAtioN IP Address:

If you wish to change the routers IP address, enter the new address here. If you change the IP address from the default, you will need to enter the new address in your Internet browsers address bar in order to access the web-based configuration utility. IP Subnet Mask:

If you wish to change the routers subnet mask, enter it here. Click Next to continue. 2/3g CoNfigurAtioN If you wish to change the 2G or 3G service provider or connection type, click on a profile in the list to highlight it, and click Set to set that profile as the default. Click Next to continue, or Back to return to the previous step. D-Link DWR-710 User Manual 14 Section 3 - Configuration Wi-fi CoNfigurAtioN Password Setting:

Choose a password for your wireless security. Clients will need this password in order to access your network wirelessly. If you are currently connected to the router using Wi-Fi, you will need to reconnect to the router using your new password once the wizard has been completed. SSID:

If you wish to change your wireless network name (SSID), enter a new name in the field provided. If you change the SSID, you may need to re-connect to the router using the new SSID before you can access your network or the configuration utility. Click Done to complete the wizard, or click Back to return to the previous page. After you have clicked Done, a confirmation window will appear. Click OK to save the configuration. D-Link DWR-710 User Manual 15 Section 3 - Configuration Internet Connection This page allows you to configure the Internet settings for your mobile network connection. Use the tabs in the left-hand column to navigate through the different settings categories. CoNNeCtioN operAtioN Flight Mode:

Flight mode turns off all communications so that the device can be powered on safely when in an aircraft. Select whether you want to Enable or Disable flight mode from the drop-

down menu, and click Change to effect the change. Preferred Cellular Network:

Select your preferred cellular network connection mode:

Auto.Mode.-.The router will automatically connect to your preferred mobile network and remain connected while the device is powered on. Manual.Mode - You must manually connect to the preferred mobile network. On.Demand - The router will connect to the preferred mobile network when Internet access is required. Click Change to effect the change. Roaming Mode:

Select whether you would like to Enable or Disable mobile network roaming from the drop-down menu. Caution: Roaming on networks other than your own may incur additional usage charges. D-Link DWR-710 User Manual 16 Section 3 - Configuration Connection:

Shows the type and status of the current mobile connection. To change the connection profile, select a user profile from the table below and click Set to activate the profile. Click Disconnect to manually disconnect the current mobile data service. Profiles:

The profiles table shows the details of currently configured user profiles. To add a new user profile, navigate to the User. Profile tab at the top of this section. user profiLe Click Add to add a new user profile. Name:

Enter a name to identify the new user profile. APN:

Enter the Access Point Name (APN) for the connection. If you do not know this information, please contact your service provider. Protocol:

Select the protocol to be used for the connection from the drop-down menu. User:

Enter the username to be used for this connection. Password:

Enter the password to be used for this connection. Delete:

Click the delete icon to delete this profile from the list. Click OK to save the profile. Click Apply to apply the profile settings and return to the Internet menu. D-Link DWR-710 User Manual 17 Section 3 - Configuration This section displays information about your 2G or 3G modem connection. 2G/3G Modem iNformAtioN Information:

Displays information about your 2G or 3G modem. settiNgs Network:

Select your preferred modem type from the drop-down menu:

Auto - The modem will automatically select the modem type depending on the network it is connected to. 3G.Only - The modem will only connect to 3G networks. 2G.Only - The modem will only connect to 2G networks. If you wish to change the modem type, select your new modem type and click Change to effect the change. Re-enter the new PIN code. Click Apply to apply the changes. D-Link DWR-710 User Manual 18 Section 3 - Configuration SIM This section allows you to turn SIM lock on or off for the SIM card which is currently inserted into the router. PIN Code:

Enter the PIN code for the SIM card. Click Enable to turn on SIM lock, or click Disable to turn off SIM lock. D-Link DWR-710 User Manual 19 Section 3 - Configuration PLMN This page allows you to view available Public Land Mobile Networks (PLMN). This page can also be used to select a preferred network when you are roaming outside of your home network. Mode:

Select Automatic to allow the router to automatically connect to the first available network when roaming. Select Manual to choose your preferred roaming network from the list below. If you have selected Manual mode, click on the preferred network to select it, and then click the Update.button to select that network as the preferred network. Click Query to refresh the list of available networks. Note: You will need to manually disconnect the current mobile data service before selecting a network using PLMN. Please refer to Connection on page 16 for further information on how to do this. D-Link DWR-710 User Manual 20 Section 3 - Configuration Network The Network pages allow you to check the current status of your Local Area Network (LAN), and make changes to LAN settings. D-Link DWR-710 User Manual 21 Section 3 - Configuration Wi-Fi This section allows you to configure the IP settings for your wireless network. ipv4 IP Address:

Enter the IPv4 address for your Wi-Fi network. If you change this address, you will need to enter the new address in your web browsers address bar in order to access the web-based configuration utility. IP Subnet Mask:

Enter the IPv4 subnet mask for your Wi-Fi network. Click.Apply.to save the current configuration. ipv6 IPv6 Address:

Enter the IPv6 address for your Wi-Fi network. Prefix for LAN:

Enter the prefix to be used to delegate IPv6 addresses to the LAN. RA Autonomous:

Check the box to set the router announcement mode to autonomous. RA On-Link:

Check the box to enable router announcement on-link Click.Apply.to save the current configuration. DNs NAme DNS Device Name:

Enter your routers DNS device name in the field provided. Click.Apply.to save the current configuration. D-Link DWR-710 User Manual 22 Section 3 - Configuration DHCP The DWR-710 has a built-in DHCP server which can assign IP addresses to connected clients. This section allows you to configure the DHCP settings. DNs server First/Second/

Third DNS Server:

Select None from the drop-down menus if you do not wish to specify a first, second, or third DNS server. Select User.Define to specify a DNS server, and enter the address of the server in the field provided. Click.Apply.to save the current configuration. stAtiC DHCp Use this option to specify a DHCP address reservation to a particular device or machine based on MAC address. To add a new reservation, click Add. MAC Address:

Enter the MAC address of the device or machine for which you wish to make the DHCP reservation. IP Address:

Enter the IP address that you wish to reserve. This address must be within the DHCP address pool. Click OK.to save the reservation. LeAseD Hosts This table shows the details of clients currently receiving a DHCP address from the DHCP server. Click Refresh to update the table. D-Link DWR-710 User Manual 23 Section 3 - Configuration NAT This section allows you to configure functions related to Network Address Translation (NAT) such as port triggering. port trigger Use this option to have inbound traffic automatically forwarded to a dynamic address on the LAN when triggered by outbound traffic. To add a new port triggering rule, click Add. Active:

Check the box to activate this rule. Name:

Specify a name to identify the rule. Trigger Protocol:

Select TCP or UDP as the protocol for the trigger ports from the drop-down menu. Trigger Port:

Enter the starting and ending trigger port for the rule. Open Protocol:

Select TCP or UDP as the protocol for the ports to be opened from the drop-down menu. Open Port(s):

Enter the starting and ending ports to be opened when the trigger occurs. Delete:

Click the Delete icon to delete the rule. Click OK.to save the rule. Click Apply to apply the current rules and return to the Network page. D-Link DWR-710 User Manual 24 Section 3 - Configuration ALg Application Level Gateways (ALG) allow certain applications to augment a networks firewall or NAT. This section enables you to enable various ALGs as required by specific applications. To enable an ALG, check the box next to the name of the rule. SIP Port:

Enter the Session Initiation Protocol (SIP) port required by your applications. Click Apply to save the settings and return to the Network page. D-Link DWR-710 User Manual 25 Section 3 - Configuration SMS The DWR-710 can send and receive SMS text messages through the mobile networks SMS function. In this section you can check the SIM cards inbox and outbox, as well as send new messages. New Message Send To:

Enter the phone number that you wish to send the message to Messages:

Enter the body of the message to be sent. Click Apply to save the current configuration. Local iNbox This tab shows a summary of SMS messages in the inbox. outbox This tab shows a summary of messages in the outbox which are yet to be sent. D-Link DWR-710 User Manual 26 Section 3 - Configuration Wi-Fi The Wi-Fi pages allow you to check the current status of your Wi-Fi network, and make changes to Wi-Fi settings. This section allows you to configure your Wi-Fi network and specify the wireless security method to be used to secure your network. Basic Enable Check the box to enable the Wi-Fi function. Mode:

Select the desired 802.11 wireless mode from the drop-

down menu. You should make your selection based on the standards supported by the wireless clients which will be connecting to your network. Channel:

To have the router automatically select the optimal wireless channel, select Auto from the drop-down menu. If you wish to select a particular channel, select it from the drop-down menu. 802.11N Channel Width:

If you are using the 802.11n standard, you can manually select the channel width which best suits your network environment. TxPower:

Select the desired transmission power from the drop-

down menu. Beacon Interval:

The beacon interval determines how often information about the wireless network is broadcast. It is recommended that you do not adjust this setting unless instructed to do so. D-Link DWR-710 User Manual 27 Section 3 - Configuration DTIM Period:

The Delivery Traffic Indication Message broadcasts information about buffered data to clients that are currently in low-power mode. Enter the desired DTIM period as a number of beacon intervals. SSID:

Enter the SSID (network name) to identify your wireless network. Hide SSID:

Check the box to hide the SSID of your network. If the SSID is hidden, wireless clients must manually enter it in order to connect to your network. Encryption Type:

Select the wireless encryption method that you wish to use from the drop-down menu. Depending on the method that you select, you may need to configure additional settings. For more information regarding wireless encryption and how to configure it, please refer to Wireless Security on page 29. If you do not wish to enable wireless security, select None from the drop-down menu. Click Apply to save the current settings. D-Link DWR-710 User Manual 28 Section 3 - Configuration Wireless Security It is recommended that you enable wireless security on your router in order to protect your wireless network from unauthorized access. You should select a wireless security protocol that is compatible with the wireless clients which will be accessing your network. Wired Equivalent Privacy (WEP) is an older wireless security standard, which although providing more protection than no security at all, has some weaknesses which could make it vulnerable to intrusion. It is recommended that you only use WEP if your wireless clients do not support Wi-Fi Protected Access (WPA). WEP is not supported by the 802.11n standard, and therefore you will not be able to achieve 802.11n speeds if using WEP. Wired Equivalent Privacy (WEP) Encryption Type:

Select WEP from the drop-down menu. Authentication Method:

Select the desired authentication method from the drop-

down menu:

Auto - The router will automatically determine the authentication method based on the client that is connecting to it. Open.System - Clients do not require authentication in order to associate with the router. The encryption key will be used to encrypt data packets sent over the network. Shared - The encryption key is used for authentication as well as to encrypt data packets. WEP Encryption Length:

Select the length of the encryption key to be used. 64-bit - A 64-bit key comprises a string of 10 hexadecimal characters, or 5 ASCII characters. 128-bit.-.A 128-bit key comprises a string of 26 hexadecimal characters, or 13 ASCII characters. Key 1-4:

You can predetermine up to 4 WEP keys. Select the WEP key you wish to use by clicking on the radio buttons next to the keys. Select whether you wish to use HEX or ASCII characters in your key using the drop-down menu. Enter the desired key in the field provided. Click Apply to save the current settings. D-Link DWR-710 User Manual 29 Section 3 - Configuration Wi-Fi Protected Access (WPA) Wi-Fi Protected Access (WPA) is a newer and more secure encryption protocol which makes significant improvements over WEP. There are two versions of WPA; the original WPA, and the newer WPA2. Encryption Type:

Select WPA.Personal from the drop-down menu. WPA Mode:

Select the desired authentication method from the drop-

down menu:

Auto.(WPA.or.WPA2) - The router will automatically determine the version of WPA to be used based on the client that is connecting to it. WPA - Clients will only be able to associate with the router using the WPA standard. WPA2 - Clients will only be able to associate with the router using the WPA2 standard. Clients which do not support WPA2 will not be able to associate with the router. Cipher Type:

Select the desired cipher type from the drop-down menu:

TKIP - This cipher is used by the WPA standard. AES - A newer cipher used by the WPA2 standard. Use of this cipher type is required in order to achieve 802.11 speeds. Pre-Shared Key The pre-shared key is the password which clients will require in order to connect to your network. Enter a password of between 8 and 63 characters in length. Click Apply to save the current settings D-Link DWR-710 User Manual 30 Section 3 - Configuration WLAN Authentication and Privacy Infrastructure (WAPI) WLAN Authentication and Privacy Infrastructure (WAPI) is a wireless security standard which is implemented in China. You should only use this protocol if your wireless clients do not support any of the other security methods provided by the DWR-710. Encryption Type:

Select .WAPI.Personal from the drop-down menu. WAPI Pre-Shared Key:

Select whether your key should use ASCII or HEX.characters using the drop down menu. Enter your desired key in the field provided. Click Apply to save the current settings. D-Link DWR-710 User Manual 31 Section 3 - Configuration Wi-Fi Protected Setup (WPS) enables you to quickly and securely add compatible devices to your wireless network. Wi-Fi Protected Setup (WPS) Enable:

Check the box to enable the Wi-Fi Protected Setup feature. Configure State:

Select whether you wish to Configure or .Unconfigure the WPS function using the radio buttons. Configure Method:

Select the WPS method that you wish to use. If your device supports Push Button Connection (PBC), simply select this option and click Apply to start the connection process. You will then have 120 seconds to press the WPS button on your wireless device in order to initiate the connection. If your device does not support PBC, you can select the PIN method and continue to the next step. Current PIN:

A PIN is a unique number that can be used to add the router to an existing network or to create a new network. Generate PIN:

For extra security, a new PIN can be generated. Click Generate to create a new PIN. The current PIN will be shown in the field next to Current.PIN. This PIN can be used by wireless clients to join your network using the PIN method. Enrollee PIN:

If the device you are trying to add to the network was provided with a PIN number, select this option and enter the devices PIN in the field. Click Apply to commence the connection process. D-Link DWR-710 User Manual 32 Section 3 - Configuration The MAC filtering option allows you to allow or deny access to wireless clients based on their MAC address. MAC Filter Enable MAC Address Filter:

Check the box to enable the MAC filtering feature. Mode:

Select the filtering mode from the drop-down menu. You can choose to Deny.Listed.Stations access to your network, or Allow.Listed.Stations access. ListeD stAtioNs tAbLe To add a new filtering rule, click Add. Active:

Check the box to activate the rule. Name:

Enter a name to identify the machine or station which will be filtered. MAC Address:

Enter the MAC address of the machine or station which you wish to filter. Delete:

Click the Delete icon to delete the rule from the table. Click OK to save the current rule and add it to the table. Click Apply to save all changes and return to the Wi-Fi page. D-Link DWR-710 User Manual 33 Section 3 - Configuration The Station List tab shows a list of all wireless clients currently connected to your wireless network. Station Lists D-Link DWR-710 User Manual 34 Section 3 - Configuration Security The Security tab allows you to configure your routers firewall settings and enable features to protect your network from outside intrusions and malicious attacks. Firewall IP Filter Click Add to add a new filtering rule. Active:

Check the box to activate the IP filter rule. Source IP:

Enter the source IP address to be filtered. Source From Port:

Enter the starting port on the source IP. Source To Port:

Enter the ending port on the source IP. Destination IP:

Enter the destination IP address to be filtered. Destination From Port:

Destination To Port:

Enter the starting port of the destination IP. Enter the ending port of the destination IP. Protocol:

Select the protocol for the IP filter rule. Delete:

Click the icon to delete the IP filtering rule. Click OK. to save the filtering rule. Click Apply to save the current configuration. D-Link DWR-710 User Manual 35 Section 3 - Configuration IPv6 Filter Click Add to add a new filtering rule. Active:

Check the box to active the IP filter rule. Source IP:

Enter the source IP address to be filtered. Source Port:

Enter the port for the source IP. Destination IP:

Enter the destination IP address to be filtered. Destination Port:

Enter the port on the destination IP. Protocol:

Select the protocol for the IP filter rule. Delete:

Click the icon to delete the IP filtering rule. Click OK. to save the current filtering rule. Click Apply to save the current configuration. D-Link DWR-710 User Manual 36 Section 3 - Configuration MAC Filter The MAC filter lets you to allow or deny access to your wireless network based on a clients MAC address. Click Add.to add a new MAC filtering rule. Blacklist/

Whitelist:

Select Blacklist to deny access to only the MAC addresses listed below. Select Whitelist to allow access to only the MAC addresses listed below. Active:

Check the box to activate the MAC filter rule. Source MAC:

Enter the MAC address of the machine or device which you wish to filter packets coming from. Destination MAC:

Enter the MAC address of the machine you wish to filter packets. Day:

Check the box for each day that you wish to activate the MAC filtering rule. Start Time:

Enter the starting time at which you wish to activate the MAC filtering rule each day. End Time:

Enter the ending time at which you wish to deactivate the MAC filtering rule each day. Delete:

Click the icon to delete this MAC filtering rule. Click OK to add the current rule to the rules list. Click Apply to save the current configuration. D-Link DWR-710 User Manual 37 Section 3 - Configuration DDOS This section allows you to enable various security features to protect against Denial of Service (DoS) attacks. DoS Prevention Filters:

Check the box next to the rule to enable prevention against that specific kind of DoS attack. Click Apply to save the current configuration. D-Link DWR-710 User Manual 38 Section 3 - Configuration URL Filter The content filter allows you to allow or deny access to specific URLs. Enable URL Filter:

Check the box to enable URL filtering. Blacklist/

Whitelist:

Select Blacklist to deny access to only URLs listed in the rule table. Select Whitelist.to allow access to only URLs listed in the rule list. Active:

Check the box to activate the URL filtering rule. URL:

Enter the URL that you wish to allow or deny access to. If you enter a domain name, all URLs under this domain will be allowed or denied access. Delete:

Click the icon to delete the rule. Click Add to save the rule and add it to the rule table. Click Apply.to save the current configuration. D-Link DWR-710 User Manual 39 Section 3 - Configuration Application This tab allows you to configure the routers administrative functions, such as time & date, remote access, and firmware. You can also access the system log. This tab shows the routers basic information. About D-Link DWR-710 User Manual 40 Section 3 - Configuration Configuration bACkup Click Backup to save the routers current configuration to a file on your computer. You will then be prompted with a save file dialogue, where you can choose where to save the configuration file. restore Click Browse to locate a previously saved configuration file on your computer. Once you have located the file, click Restore to configure the router according to the selected configuration file. reset to DefAuLt Click Reset to restore the routers settings to the factory defaults. Important:.All settings stored on the router will be lost following a factory reset. D-Link DWR-710 User Manual 41 Section 3 - Configuration Firmware Upgrade You can upgrade the firmware of the router here. Make sure the firmware file you want to use is on the local hard drive of the computer. Please check your local D-Link support site or http://support.dlink.com for firmware updates and language packs. Click Browse to locate a previously downloaded firmware file on your computer. Once the file has been located, click Update to carry out the firmware upgrade process. Important: All current settings will be restored to their factory defaults following a firmware upgrade. D-Link DWR-710 User Manual 42 Section 3 - Configuration This section allows you to configure the routers automatic power-saving modes. Standby Mode Enable Auto Power Saving:

Check the box to enable the automatic power saving features. Enter Standby Mode:

Enter the number of minutes after which the router will enter standby mode if no activity is detected. Enter Hibernate Mode:

Enter the number of minutes after which the router will enter hibernate mode if no activity is detected. Auto Power Off:

Enter the number of minutes after which the router will shut down if no activity is detected. Click Apply to save the current configuration. D-Link DWR-710 User Manual 43 Section 3 - Configuration Password This page lets you change the configuration interface passwords for the Administrator (Admin) and User accounts. Select the user to change password:

Select whether you wish to change the password for the admin or user account from the drop down menu. Old Password:

Enter the existing password for this account. New Password:

Enter the new password for this account. Retype New Password:

Type the new password again to confirm. Click Apply to save the current configuration. D-Link DWR-710 User Manual 44 Section 3 - Configuration Date and Time This page lets you set the time and date for your router, and also configure automatic time synchronization and daylight savings time. DAte Current System Time:

Displays the current time and date according to the routers system clock. Mode:

Select Manual to manually set the time and date, or select Get.from.Time.Server to have the router automatically synchronize the time with a Network Time Protocol (NTP) server. New Time:

If you selected Manual mode, enter the current time. New Date:

If you selected Manual mode, enter the current date. Time Protocol:

If you selected Get time From Server, select the desired time protocol from the drop-down menu. Time Server Address 1-4:

Enter up to four NTP server addresses which will be used to synchronize the routers system time and date. Click Apply to save the current settings. D-Link DWR-710 User Manual 45 Section 3 - Configuration time ZoNe Time Zone:

Select your time zone from the drop-down menu. Enable Daylight Saving:

Check the box to enable automatic adjustment for daylight saving. Start Date:

Enter the details of the starting date and time for daylight saving time in your region. End Date:

Enter the details of the ending date and time for daylight saving time in your region. Click Apply to save the current settings. D-Link DWR-710 User Manual 46 Section 3 - Configuration Language Language: Select your preferred language from the drop-down menu. Click Apply to save the current configuration. D-Link DWR-710 User Manual 47 Section 3 - Configuration The system log displays a record of all events which occur while the router is running. System Log Log settiNg Enable Log:

Check the box to enable the routers log-keeping function. Click Apply to save the current configuration. Log DispLAy Refresh:

Click to update the log display. Clear Log:

Click to clear all log entries. Display Log Level:

Select the level of log event which you wish to view from the drop-down menu. D-Link DWR-710 User Manual 48 Section 4 - Connecting to a Wireless Network Connecting to a Wireless Network Using Windows 8 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DWR-710 User Manual 49 Section 4 - Connecting to a Wireless Network You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at this point to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected.will appear next to the name of the network to which you are connected. D-Link DWR-710 User Manual 50 Section 4 - Connecting to a Wireless Network Connecting to a Wireless Network Using Windows 7 Windows 7 users may use the built-in wireless utility to connect to a wireless network. If you are using another companys utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows 7 utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. You can also click on the wireless icon in your system tray (lower-right corner). The utility will display any available wireless networks in your area. Wireless D-Link DWR-710 User Manual 51 Section 4 - Connecting to a Wireless Network Highlight the wireless network (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to Networking Basics on page 66 for more information. D-Link DWR-710 User Manual 52 Section 4 - Connecting to a Wireless Network Configuring Wireless Security It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless D-Link DWR-710 User Manual 53 Section 4 - Connecting to a Wireless Network 3. Highlight the wireless network (SSID) you would like to connect to and click the Connect button. 4. The following window appears while your computer tries to connect to the router. D-Link DWR-710 User Manual 54 Section 4 - Connecting to a Wireless Network 5. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DWR-710 User Manual 55 Section 4 - Connecting to a Wireless Network Using Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another companys utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check the TCP/IP settings for your wireless adapter. Refer to Networking Basics on page 66 for more information. D-Link DWR-710 User Manual 56 Section 4 - Connecting to a Wireless Network Configuring Wireless Security It is recommended to enable wireless security (WEP/WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DWR-710 User Manual 57 Section 4 - Connecting to a Wireless Network 3. Enter the same security key or passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DWR-710 User Manual 58 Section 4 - Connecting to a Wireless Network Connect to a Wireless Network Using Windows XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another companys utility or Windows 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows XP utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check the TCP/IP settings for your wireless adapter. Refer to Networking Basics on page 66 for more information. D-Link DWR-710 User Manual 59 Section 4 - Connecting to a Wireless Network Configure WEP It is recommended to enable WEP on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used. 1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DWR-710 User Manual 60 Section 4 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the same WEP key that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless router. D-Link DWR-710 User Manual 61 Section 4 - Connecting to a Wireless Network Configure WPA-PSK It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DWR-710 User Manual 62 Section 4 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DWR-710 User Manual 63 Section 5 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DWR-710. Read the following descriptions if you are having problems. 1. Why cant I access the web-based configuration utility?

When entering the IP address of your router (192.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:

- Internet Explorer 8 or higher, Chrome 19.0, Firefox 12.0, or Safari 4.0. If attempting to connect wirelessly, ensure that the wireless icon on LED is illuminated. Also, ensure that you are connected to the correct SSID for your mobile router. Make sure that the computer you are using is not connected to any other devices (such as routers or switches) which might have the same IP address as the DWR-710, as this may cause an IP address conflict. If you have a conflict, temporarily unplug any other devices from your computer while you configure the DWR-710. You can also change the IP address of the DWR-710 in the Network section of the configuration utility. Please refer to Wi-Fi on page 22 for further information on changing the IP address. You may also need to renew your computers IP address configuration. To do this, start the Command utility: Click on Start > Run. In the run box type cmd and click OK. (Windows Vista users type cmd in the Start Search box.) This will bring up a black screen with white text. At the command prompt, type ipconfig./release and wait for the process to be completed. Next, type ipconfig./renew which will renew your computers IP address configuration. Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BlackICE, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DWR-710 User Manual 64 Section 5 - Troubleshooting Configure your Internet settings:

- Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the Default Level button to restore the settings to their defaults.

- Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK.

- Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.

- Close your web browser (if open) and re-open it. 2. What can I do if I forgot my password?

If you forgot your password, you must reset your router. Please note that this process will change all your settings back to the factory defaults. To reset the router, first remove the back cover of the router to expose the battery. Using a paperclip or similar object, press and hold the reset button, which is located inside the hole to the upper-left of the SIM card slot (see diagram). The DWR-710 will restore the factory default settings. Wait about 30 seconds for the router to restart before you attempt to reconnect to it. The default IP address is 192.168.0.1, and the default username is admin and the password should be left blank. Reset Button D-Link DWR-710 User Manual 65 Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK.

(Windows Vista users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DWR-710 User Manual 66 Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:

Step 1 Windows 8 Windows 7 Click on Start > Control Panel > Network and Internet Connections > Network Connections > Configure your Internet Protocol (IP) settings. Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows Vista Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows XP Click on Start > Control Panel > Network Connections. Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DWR-710 User Manual 67 Appendix C - Technical Specifications Technical Specifications Storage microSD card slot Wireless Security Built-in firewall WEP/WPA/WPA2 Firewall Network Address Translation (NAT) Dimensions (L x W x H) 91.5 x 27 x 11 mm (3.60 x 1.06 x 0.43 inches) Weight 25 grams (0.88 ounces) Operating Temperature 0 to 40 C (32 to 104 F) Certifications FCC/CE Wi-Fi Certified HSUPA/HSPDA/UMTS: 850/900/1900/2100 MHz Radio Frequency Bands EDGE/GPRS/GSM: 850/900/1800/1900 MHz Power Class 4 (850/900 MHz) Cellular Access HSPA+

Downlink: 21 Mbps Uplink: 11 Mbps Wi-Fi Access Point 802.11n (150 Mbps compatible) 802.11g (54 Mbps) 802.11b (11 Mbps) Antennas Internal 3G main antenna Internal 3G diversity antenna Internal Wi-Fi antenna USB Interface micro USB port USIM Slot Standard 6-pin SIM card interface Status Indicators Signal LED Wi-Fi LED D-Link DWR-710 User Manual 68 Appendix D - Safety CE Warnig Warnings and Declarations Specific Absorption Rate (SAR)

. This mobile device is a radio transmitter and receiver. It is not designed to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organization ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg and the highest SAR value for this device when tested complied with this limit. To comply with radiofrequency radiation (RF) exposure guidelines during body worn operation, this device must be used with a minimum of 0.5 cm separation from the body. Failure to observe these instructions could result in your RF exposure exceeding the relevant guideline limits. Users have to use the connection to USB interfaces with USB 2.0 version or higher. The device Complies with the essential requirements of Article 3 of the R&TTE 1999/5/EC Directive and All the reports of the applied standards have the Positive Opinion of Notied Body:

PHONEIX TESTLAB, Knigswinkel 10 D-32825 Blomberg, Germany D-Link DWR-710 User Manual 69 Appendix D - Safety FCC Warnig

. FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may n ot cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Caution:

Changes or modications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. D-Link DWR-710 User Manual 70 Appendix D - Safety

. RF Exposure Information (SAR)

. This device meets the governments requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless devices employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certied power level in all tested frequency bands. Although the SAR is determined at the highest certied power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. SAR compliance has been established in the host product(s) (laptop computers), tested at 5mm separation distance to the human body, and tested with USB slot configurations including Horizontal-UP, Horizontal-Down, Vertical-Front, Vertical-Back. This device can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. The highest SAR value, tested per FCC RF exposure guidelines for USB dongle, as described in this user guide, is 0.65W/kg. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this device is on le with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: KA2WR710B1. D-Link DWR-710 User Manual 71