| submitted | available | document details (if available) | source link |
|---|---|---|---|
| various | User Manual | Users Manual | 5.42 MiB |
Version 1.00| 11/19/2014 User Manual AC3150 Ultra Wi-Fi Router D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Preface Manual Revisions Revision 1.00 Date Description November 19, 2014 Initial release Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Apple, Apple logo, Safari, iPhone, iPad, iPod touch and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc. Chrome browser, Google Play and Android are trademarks of Google Inc. Internet Explorer, Windows and the Windows logo are trademarks of the Microsoft group of companies. Copyright 2014 by D-Link Corporation, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc. The purpose of this product is to create a constant network connection for your devices. As such, it does not have a standby mode or use a power management mode. If you wish to power down this product, please simply unplug it from the power outlet. Power Usage This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 8.4 watts Switched Off: 0.1 watts D-Link DIR-885L User Manual i Table of Contents Preface ................................................................................. i Manual Revisions ........................................................................... i Trademarks ...................................................................................... i Power Usage .................................................................................... i Product Overview ..............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features ............................................................................................ 4 Antenna Setup ............................................................................... 5 Hardware Overview ..................................................................... 6 Connections ........................................................................... 6 LEDs ........................................................................................... 7 Installation .........................................................................8 Before you Begin ........................................................................... 8 Wireless Installation Considerations ...................................... 9 Manual Setup ...............................................................................10 Getting Started ................................................................12 Setup Wizard ................................................................................13 QRS Mobile App ..........................................................................18 mydlink SharePort ......................................................................23 Using the mydlink SharePort app for iPad, iPhone, and iPod touch ................................................23 Main Menu .......................................................................26 Documents .......................................................................27 Pictures ..............................................................................29 Videos.................................................................................31 Music ..................................................................................33 Folders ...............................................................................36 Favorites ............................................................................39 Using the mydlink SharePort app for Android ...40 Main Menu .......................................................................44 Documents .......................................................................45 Pictures ..............................................................................47 Videos.................................................................................49 Music ..................................................................................51 Folders ...............................................................................54 Favorites ............................................................................58 Configuration ...................................................................59 Device Mode ........................................................................60 Home ..............................................................................................61 Internet ...................................................................................61 DIR-885L .................................................................................62 Connected Clients ..............................................................63 USB Device ............................................................................64 Settings ..........................................................................................65 Wizard .....................................................................................65 Internet (Router Mode) .....................................................65 IPv6 .....................................................................................74 Wireless (Router Mode) ....................................................92 D-Link DIR-885L User Manual ii Table of Contents Guest Zone .......................................................................94 Network ..................................................................................96 SharePort ...............................................................................98 Create User .......................................................................99 mydlink ................................................................................ 100 Features ....................................................................................... 101 QoS Engine......................................................................... 101 Firewall Settings ............................................................... 102 IPv4/IPv6 Rules ............................................................ 104 Port Forwarding ............................................................... 105 Virtual Server ................................................................ 106 Website Filter ..................................................................... 107 Static Routes ...................................................................... 108 IPv6 .................................................................................. 109 Dynamic DNS .................................................................... 110 IPv6 Host ........................................................................ 111 Management ............................................................................. 112 Time & Schedule .............................................................. 112 Time ................................................................................. 112 Schedule ........................................................................ 113 System Log ......................................................................... 114 Admin .................................................................................. 115 System ............................................................................ 116 Upgrade .............................................................................. 117 Statistics .............................................................................. 118 Connect a Wireless Client to your Router ....................119 WPS Button ................................................................................ 119 Windows 8 ................................................................................ 120 WPA/WPA2 ......................................................................... 120 Windows 7 ................................................................................ 122 WPA/WPA2 ......................................................................... 122 WPS ....................................................................................... 125 Windows Vista ......................................................................... 129 WPA/WPA2 ......................................................................... 130 Windows XP ............................................................................. 132 WPA/WPA2 ......................................................................... 133 Troubleshooting ............................................................135 Wireless Basics ...............................................................139 What is Wireless? ...................................................................... 140 Tips ................................................................................................ 142 Wireless Modes ......................................................................... 143 Networking Basics .........................................................144 Check your IP address ............................................................ 144 Statically Assign an IP address ............................................ 145 Wireless Security ......................................................... 146 What is WPA? ................................................................ 146 Technical Specifications ................................................147 Safety Statements .........................................................148 D-Link DIR-885L User Manual iii Table of Contents Product Overview Package Contents DIR-885L Ethernet Cable Power Adapter Wi-Fi Configuration Note Wi-Fi Configuration Note Quick Installation Guide D-Link Cloud Service Mobile Apps Guide CD-ROM If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-8L will cause damage and void the warranty for this product. D-Link DIR-885L User Manual 1 Section 1 - Product Overview System Requirements Network Requirements An Ethernet-based cable or DSL modem 802.11ac (draft), n, g, b, or a wireless or Ethernet port Computer with the following:
Windows, Macintosh, or Linux-based operating system An installed Ethernet adapter Web-based Configuration Utility Requirements Browser Requirements:
Internet Explorer 7 or higher Firefox 3.5 or higher Safari 4 or higher Chrome 8 or higher mydlink Requirements Windows Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. iPhone/iPad/iPod touch (iOS 4.0 or higher) Android device (2.3 or higher) Computer with the following browser requirements:
Internet Explorer 7 or higher Firefox 3 or higher Safari 5 or higher Chrome 5 or higher iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc. D-Link DIR-885L User Manual 2 Section 1 - Product Overview Introduction The D-Link DIR-885L AC3150 Ultra Wi-Fi Router uses advanced AC beamforming technology to maximize the speed and range of your wireless signal to significantly outperform 802.11n and other 802.11ac devices. It also comes equipped with four Gigabit ports to provide speeds up to 10x faster than standard 10/100 ports. With the addition of Advanced Quality of Service (QoS), data streams are separated, which helps organize and prioritize your network traffic so your video streaming, gaming, and VoIP calls run smoother over both your wired and wireless network. The DIR-885L supports a host of cloud features including QRS Mobile, which allows you to setup and configure the router using a mobile app. You can set up your router right from your sofa, no PC required. The AC3150 Ultra Wi-Fi Router is also mydlink-enabled, which gives you access to your home network no matter where you go. Now you can monitor and manage your home network right from your laptop, iPhone, iPad, or Android device. mydlink-enabled routers can be configured to send an email to keep you informed anywhere, anytime when new devices are connecting to your network or unwanted access is detected. Monitor in real-time websites that are being visited with recent browser history displayed on the mydlink Lite app which is great for parents. SharePort technology lets you take advantage of the USB 3.0 port found on the back of your DIR-885L (as well as an additional USB 2.0 port). Plug in a USB storage drive and you can use the mydlink SharePort app for iPad, iPhone, iPod touch, and Android device to access files, stream videos, view photos, or listen to music on your laptop or mobile devices. Plug in a printer and you can use the mydlink SharePort app to share that printer with all of your devices. The DIR-885L AC3150 Ultra Wi-Fi Router provides incredible speeds, smart antenna technology, fast ports, cloud features, and terrific security features. It also features an innovative design and easy installation options. D-Link DIR-885L User Manual 3 Section 1 - Product Overview Features Faster Wireless Networking - The DIR-885L uses advanced AC beamforming to provide up to a full 3200 Mbps*
wireless connection with concurrent 801.11ac and 802.11n wireless clients . It also operates on both the 2.4 GHz and 5 GHz bands to allow separation of traffic so users can participate in high-bandwidth activities, such as video streaming, online gaming, and real-time audio, without affecting low-priority traffic like email and web surfing. Cloud Features - The DIR-885L support the QRS Mobile app to setup the router using a mobile device. It is also mydlink-enabled so you can remotely access and mange your DIR-885L from a mobile device. The mydlink SharePort app can be used to share files, stream videos, view photos, and play music. SharePort Plus lets you share a printer. Compatible with 802.11n/g/b/a Devices - The DIR-885L is still fully compatible with the 802.11n, IEEE 802.11g and 802.11a standards, so it can connect with existing 802.11n, 802.11g, 802.11b, and 802.11a wireless devices. Advanced Firewall Features - The web-based user interface displays a number of advanced network management features including:
Content Filtering - Easily applied content filtering based on MAC address, URL, and/or domain name. Filter Scheduling - These filters can be scheduled to be active on certain days, or for a duration of hours or minutes. Secure Multiple/Concurrent Sessions - The DIR-885L can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-885L can securely access corporate networks. User-friendly Setup Wizard - Through its easy-to-use web-based user interface, the DIR-885L lets you control what information is accessible to those on the wireless network, whether from the Internet, or from your companys server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11b, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-885L User Manual 4 Section 1 - Product Overview Hardware Overview Connections 2 3 4 1 5 6 7 8 Connect a USB flash drive to share content , or connect it to a USB printer to share it on your network. 1 USB 3.0 Port 2 Mode Switch 3 Reset Button 4 WPS Button 5 Gigabit LAN Ports (1-4) Connect Ethernet devices such as computers, switches, storage (NAS) devices and game consoles. 6 Gigabit Internet Port 7 Power Button 8 Power Receptor Using an Ethernet cable, connect your broadband modem to this port. Press the power button to power on and off. Receptor for the supplied power adapter. Insert a paperclip in the hole and wait for several seconds to reset the router to default settings. Press to start the WPS process and automatically create a secure connection to a WPS client. D-Link DIR-885L User Manual 6 Section 1 - Product Overview Hardware Overview LEDs 1 2 3 4 5 1 2 Power LED Internet LED A solid blue light indicates a proper connection to the power supply. The light will be a solid orange during boot up. A solid light indicates connection on the Internet port. If the LED is orange, the connection is good but the router cannot connect to the Internet. 3 Wireless (2.4 GHz) LED A solid blue light indicates that the 2.4 GHz wireless band is enabled. 4 Wireless (5 GHz) LED A solid blue light indicates that the 5 GHz wireless band is enabled. 5 USB 3.0 LED A solid blue light indicates that a USB device detected in the USB 3.0 port. D-Link DIR-885L User Manual 7 Section 1 - Product Overview This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Installation Before you Begin Please configure the router with the computer that was last connected directly to your modem. You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoET, BroadJump, or EnterNet 300 from your computer or you will not be able to connect to the Internet. D-Link DIR-885L User Manual 8 Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum -
each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick!
Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use. D-Link DIR-885L User Manual 9 Section 2 - Installation 1. Turn off and unplug your cable or DSL broadband modem. This is required. Manual Setup Modem 2. Position your router close to your modem and a computer. Place the router in an open area of your intended work area for better wireless coverage. 3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer. 4 DIR-885L Computer D-Link DIR-885L User Manual 10 Section 2 - Installation 4. Plug one end of the included Ethernet cable that came with your router into the yellow port labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem. 4 DIR-885L Modem INTERNET Computer 5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes. 6. Connect the supplied power adapter into the power receptor on the back of the router and then plug it into a power outlet or surge protector. Press the power button and verify that the power LED is lit. Allow 1 minute for the router to boot up. Note: This unit is to be used with power supply model WA-36C12R. 4 DIR-885L Computer INTERNET Modem 7. If you are connecting to a broadband service, you may be online already and further configuration will be optional. D-Link DIR-885L User Manual 11 Section 2 - Installation There are several different ways you can configure your router to connect to the Internet and connect to your clients:
Getting Started D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page 13. QRS Mobile App - Use your iPhone, iPad, or iPod touch to configure your router. Refer to page 18. Manual Setup - Log into the router and manually configure your router. Refer to page 59 D-Link DIR-885L User Manual 12 Section 3 - Getting Started Setup Wizard If this is your first time installing the router, open your web browser and enter http://dlinkrouter.local/ in the address bar. Alternatively, enter the IP address of the router (default: http://192.168.0.1). Please refer to page 59. The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. D-Link DIR-885L User Manual 13 Section 3 - Getting Started If the router does not detect a valid Internet connection, a list of connection types to choose from will be displayed. Select your Internet connection type (this information can be obtained from your Internet service provider) and click Next to continue. If the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DIR-885L User Manual 14 Section 3 - Getting Started For both the 2.4 GHz and 5 GHz segments, create a Wi-Fi network name
(SSID) using up to 32 characters. Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network. Click Next to continue. In order to secure the router, please enter a new password. You will be prompted for this password every time you want to use the routers web configuration utility. Click Next to continue. The Summary window will display your settings. Click Next if you are satisfied, or click Back to make changes to them. D-Link DIR-885L User Manual 15 Section 3 - Getting Started To use the mydlink service (mydlink.com or the mydlink Lite app), you must have an account. Select Yes if you have a mydlink account already, or No if you want to create one. Click Next to continue. If you do not want to register at this time, click Skip. If you clicked Yes, enter your mydlink account name (email address) and password. Click Next to register your mydlink account with the router. If you clicked No, fill out the requested information and click Next to create your mydlink account. At the end of the wizard, you will be presented with a final summary of your settings. Click Finish to close the wizard. D-Link DIR-885L User Manual 16 Section 3 - Getting Started The mydlink App will allow you to receive notices, browse network users, and configure your router from an iPhone/iPad/iPod touch (iOS 3.0 or higher), or Android device (1.6 or higher). To download the "mydlink Lite" app, visit the Apple Store, Android Market or http://mydlink.com/Lite. PC and Mac users can use the mydlink portal at http://mydlink.com. D-Link DIR-885L User Manual 17 Section 3 - Getting Started QRS Mobile app allows you to install and configure your router from your mobile device. QRS Mobile App Step 1 Search for the free QRS Mobile App on the iTunes Store or Google Play. For the iTunes Store, you may also scan this code to download. For Google Play, you may also scan this code to download. Step 2 Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the Wi-Fi name (SSID) as listed on the supplied info card. Select and then enter your Wi-Fi password. Step 3 Once you connect to the router, launch the QRS mobile app from the Home screen of your device. D-Link DIR-885L User Manual 18 Section 3 - Getting Started Step 4 You will see the welcome screen. Tap Start to proceed, then Next once the Operation Mode screen appears. Step 5 At this point, please ensure that you the router is connected to a modem. Plug one end of the provided Ethernet cable into your DSL or cable modem, and plug the other end into the port marked INTERNET on the DIR-885L. Tap Next to automatically detect your Internet connection and proceed to the next step. D-Link DIR-885L User Manual 19 Section 3 - Getting Started Step 6 You will be prompted to set up each wireless frequency band in turn;
the 2.4 GHz band followed by the 5 GHz band. Firstly, enter a network name (SSID) of your choice, or leave it unchanged to accept the default SSID. Each wireless band can be assigned its own SSID. Secondly, choose a Wi-Fi password of at least 8 characters. Any device trying to connect to the router wirelessly will need to enter this password the first time it connects. Finally, tap Next to proceed. Step 7 Enter the administrator password of your choice. Unlike the Wi-Fi password, this password is only required when you need to configure the router. See page 59 for details of when this password is used. Tap Next to proceed. D-Link DIR-885L User Manual 20 Section 3 - Getting Started Step 8 If you already have a mydlink account, select Yes, I have a mydlink account and enter your mydlink email address and password. Lastly, tap Sign In to set up the router to use your mydlink account. If you do not have a mydlink account, select No, I want to create a new mydlink account. Enter your email address, choose a mydlink password and check the I accept the mydlink terms and conditions box. Finally, tap Register to create your new mydlink account. If you do not want to configure your router with mydlink at this stage, tap Skip to proceed. Step 9 If you wish to receive push notifications whenever a new firmware update is available, check the Notify me when new firmware is available box and tap Next. Otherwise, just tap Next to proceed. D-Link DIR-885L User Manual 21 Section 3 - Getting Started Step 10 You will be presented with a summary of your chosen settings. If you wish to make any changes, tap Back to step back through the previous pages. Otherwise, tap Next to complete the setup. Congratulations, your device has been successfully configured! You may now exit the QRS app. D-Link DIR-885L User Manual 22 Section 3 - Getting Started mydlink SharePort Using the mydlink SharePort app for iPad, iPhone, and iPod touch The mydlink SharePort app is a streamlined mobile application that allows you to conveniently stream media and share files stored on a removable storage connected to your router. Once the router is set up, you can start the app and easily connect from a local network or through the Internet to access your photos, videos, music, and documents. It allows you to create your own personal cloud storage. You can upload files and photos from your mobile device to the removable storage via the app from anywhere in the world!
Note: In order to ensure smooth streaming performance, you will need a minimum of 2 Mbit/s upload bandwidth for your routers Internet connection. Streaming performance will vary depending on the quality of your Internet connection. Note: If you choose to skip the mydlink SharePort registration during the initial setup of your DIR-885L, you may begin the registration process anytime by accessing the mydlink SharePort feature from within the router configuration. Please see page 94 for details on how to begin the mydlink shareport registration process. 1. If you are connecting remotely through the mydlink SharePort app from the Internet, you will need a mydlink account. 2. Make sure the device is powered on. Then plug your USB drive into the USB port of the device. Note: If you connect a removable storage with many files or a large capacity, it may take a while for the router to scan and catalog your files. D-Link DIR-885L User Manual 23 Section 3 - Getting Started 3. Use your iPhone, iPad or iPod touch to search for and download the free mydlink SharePort app from the App Store. If you have a QR code reader, you can scan the code for mydlink SharePort to the right. 4. If you are connecting to the router from a local network:
On your mobile device, go to your Wi-Fi settings and connect to your routers wireless network using the default Wi-Fi settings. Locate the Wi-Fi name (SSID) and password for your device as printed on the included Wi-Fi Configuration Card. If you are connecting to the router from a remote network:
Go directly to the next step. D-Link DIR-885L User Manual 24 Section 3 - Getting Started 5. Tap the mydlink SharePort icon, and the app will load. 6. At the mydlink SharePort device list page, tap the gear icon at the top right to enter the Settings page. 7. Enter your Admin Login and your mydlink Account Login information in the fields and click Done. You will be taken back to the device list where you can select the device for use with mydlink SharePort. 8. You can now use the mydlink SharePort app interface to stream media and access files stored on your removable drive. The wireless icon at the bottom will be lit blue to indicate a Local Access connection. It will be green to indicate you are connected to the router through Remote Access. Note: If you see a red wireless icon, your routers network environment may not be suitable for a direct network connection and you may experience slow network speeds. D-Link DIR-885L User Manual 25 Section 3 - Getting Started Main Menu The mydlink SharePort main menu has different sections that let you see all the documents, photos, movies, or music stored on your removable storage. Tap < or >, or swipe left or right to move between the different sections. The Wi-Fi icon at the bottom indicates an active local network connection (blue) or remote connection (green/red). Tap Log In if it is not lit, or Log Out to return to the login page. Tap on the document icon to view documents. Tap the camera icon to view photos. Tap on the movie icon to play videos. Tap on the music icon to play audio files. Tap on the folder icon to browse all files in a folder view. Tap on the star icon to access your favorite files. D-Link DIR-885L User Manual 26 Section 3 - Getting Started Documents The Documents section allows you to share, print, and view documents streamed from your DIR-885L to your mobile device. Tap the document icon on the main menu to browse the documents on your mobile device. Search Bar:
Enter a filename here to search your storage. Tap to mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options:
Mail: Tap to e-mail the file. iCloud: Tap to store the file on iCloud. AirPrint: Tap to print the file. Open In...: Tap to use a third-party app to open the file. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-885L User Manual 27 Section 3 - Getting Started Tap on a file to start the document viewer. In the viewer:
Tap to add/remove the file from your Favorites. Tap to bring up the same options as >. Note: Some files may require a third-party app to view them. D-Link DIR-885L User Manual 28 Section 3 - Getting Started The Pictures section allows you to stream images from your DIR-885L to your mobile device. Tap the camera icon on the main menu to browse your photo collection on your removable storage. Pictures Search Bar:
Enter a filename here to search your storage. Tap to mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options:
Mail: Tap to e-mail the image. iCloud: Tap to store the image on iCloud. AirPrint: Tap to print the image. Facebook: Tap to upload the image to your Facebook account. Twitter: Tap to upload the image to your Twitter account. Open In...: Tap to use a third-party app to open the file. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to start a slideshow of your photos. Tap the screen again to bring up the menu. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-885L User Manual 29 Section 3 - Getting Started Tap on a file to start the photo viewer. In the viewer:
Tap to add/remove the current image from your Favorites. Tap to start the slideshow. Tap to bring up the same options as >. D-Link DIR-885L User Manual 30 Section 3 - Getting Started The Videos section allows you to stream video clips and movies from your DIR-885L to your mobile device. Tap the movie icon on the main menu to browse your videos on your removable storage. Videos Search Bar:
Enter a filename here to search for a specific file. Tap to mark files for deletion. Tap the star icon next to a file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options:
Mail: Lets you e-mail the file. iCloud: Lets you store the file on iCloud. Open In...: Lets you use a third-party app to open the file. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-885L User Manual 31 Section 3 - Getting Started Tap on a file to start playing it. In the player:
Tap to play/pause the video. You can scroll to any time on the time line by holding and sliding your finger. Tap to enter/exit fullscreen mode. Tap to add/remove the file from your Favorites. Tapping this icon gives you additional options:
Mail: Lets you e-mail the video. iCloud: Lets you store the video on iCloud. Open In...: Lets you use a third-party app to open the file. D-Link DIR-885L User Manual 32 Section 3 - Getting Started The Music section allows you to stream songs from your DIR-885L to your mobile device. Tap the music icon on the main menu to browse your music collection on your removable storage. Music Search Bar:
Enter a filename here to search your storage. Tap to create a playlist and mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping this icon gives you additional options:
Mail: Lets you e-mail the file. iCloud: Lets you store the file on iCloud. Open In...: Lets you use a third-party app to open the file. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-885L User Manual 33 Section 3 - Getting Started Tap on a file to start playing it. In the player:
Tap to repeat all. Tap again to repeat a single song. Tap to skip to the previous/next song. Tap to enable/disable shuffle mode. To create a playlist:
Tap Edit > Add Playlist. Enter a name for the playlist, then tap Save. The name of the playlist will appear in the browser next to the icon. D-Link DIR-885L User Manual 34 Section 3 - Getting Started To add songs to a playlist:
Tap the playlist in the browser. Tap Add Music... to add songs to the current playlist. Tick the songs you wish to add and tap Done. To delete songs from the playlist:
Tap Edit in the playlist browser and mark the files to be deleted. Tap Delete. D-Link DIR-885L User Manual 35 Section 3 - Getting Started Folders You can browse your removable storage in a folder view in the folders section. Tapping the filename will open the viewer/player for that file type as described in the previous pages. You can also upload files from your mobile device to the removable storage attached to your router. Search Bar:
Enter a filename here to search your storage. Tap to take you to the editing screen where you can add a folder and mark files for deletion or copying. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tapping the > icon gives you additional options depending on the file type. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to upload files from your device to your removable storage. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-885L User Manual 36 Section 3 - Getting Started To delete files:
Tap Edit at the top right. Tick the circle next to a file to mark it for deletion. Tap on Delete at the bottom to delete the file. To copy files:
Tap on Copy to bring up a window where you can select the folder to copy to. Browse to the directory you want to copy the marked files to and tap Paste. You can also tap Add Folder to create a new folder. To create a new folder:
Browse to the directory you wish to create a new folder in. Tap Edit at the top right. Tap Add Folder to add a new folder. Enter the name of the new folder, then tap Save. Tap OK to confirm folder creation. D-Link DIR-885L User Manual 37 Section 3 - Getting Started To upload images and videos from your mobile device:
Browse to the folder you wish to upload to. Tap Upload at the bottom. Select the photos/videos you wish to upload. Tap Done. During the upload process, the size of the file and the upload progress will be displayed. To upload more files, tap the + icon at the top right and repeat the steps listed above. D-Link DIR-885L User Manual 38 Section 3 - Getting Started The Favorites section allows you to quickly access your most often used files, no matter what file type, in a special section. Files added to the Favorites section will be copied here for playback in a centralized location. Favorites Tap to mark files for deletion from the local storage in Favorites. The file will still be accessible in other mydlink SharePort sections. Tapping this icon gives you additional options depending on the file type. The bottom menu bar includes these options:
Tap to go back to the main menu. Tap to update the list of files. Tap to reorder the files alphabetically. Tap on a file to start the file viewer. In the viewer:
Tap to add/remove the file from your Favorites. Tap to bring up additional options. Note: The file options available will vary depending on the file type. D-Link DIR-885L User Manual 39 Section 3 - Getting Started Using the mydlink SharePort app for Android The mydlink SharePort app is a streamlined mobile application that allows you to conveniently stream media and share files stored on a removable storage connected to your router. Once the router is set up, you can start the app and easily connect from a local network or through the Internet to access your photos, videos, music, and documents. It allows you to create your own personal cloud storage; you can upload files and photos from your mobile device to the removable storage via the app from anywhere in the world!
Note: In order to ensure smooth streaming performance, you will need a minimum of 2 Mbit/s upload bandwidth for your routers Internet connection. Streaming performance will vary depending on the quality of your Internet connection. If you are connecting remotely through the mydlink SharePort app from the Internet, you will need a mydlink account. Make sure the device is powered on. Then plug your USB drive into the USB port of the device. Note: If you connect a removable storage with many files or a large capacity, it may take a while for the router to scan and catalog your files. D-Link DIR-885L User Manual 40 Section 3 - Getting Started Use your Android mobile device to search for and download the free mydlink SharePort app from Google Play. If you have a QR code reader, you can scan the code for mydlink SharePort to the right. On your mobile device, go to your Wi-Fi settings and connect to your routers wireless network using the default Wi-Fi settings. Your Wi-Fi network details can be found on the included Wi-Fi configuration card included with your router, or on the bottom of the router. D-Link DIR-885L User Manual 41 Section 3 - Getting Started Once connected, tap the mydlink SharePort icon, and the app will load. At the login page:
You can tap ? to see diagrams with descriptions of the two types of connections available. If you are unsure about which connection method to choose, you can click Remote Access. Local Access:
Local mode will connect you to storage on your current network. For example, if you are at home connecting to your router, choose this mode. Remote Access:
Remote mode will connect you to storage on your router in a different location. For example, you are at your office connecting to your router at home. D-Link DIR-885L User Manual 42 Section 3 - Getting Started If you are directly connected to the DIR-885Ls wireless network, tap Local Access and enter the Admin Password of your router, then tap Log In. If you are connecting through the Internet tap Remote Access and enter your mydlink login information, then tap Log In. Tap on your router on the devices page that appears. You can now share your files. After logging in, select your router from the device list. You can use the mydlink SharePort app interface to stream media and access files stored on your removable drive. The wireless icon at the bottom will be lit blue to indicate a Local Access connection. It will be green to indicate you are connected to the router through Remote Access. Note: If you see a red wireless icon, your routers network environment may not be suitable for a direct network connection and you may experience slow network speeds. D-Link DIR-885L User Manual 43 Section 3 - Getting Started Main Menu The mydlink SharePort main menu has different sections that let you see all the documents, photos, movies, or music stored on your removable storage. Tap < or >, or swipe left or right to move between the different sections. The Wi-Fi icon at the bottom indicates an active local network connection (blue) or remote connection (green/red). Tap Log In if it is not lit, or Log Out to return to the login page. Tap on the document icon to view documents. Tap the camera icon to view pictures. Tap on the movie icon to play videos. Tap on the music icon to play audio files. Tap on the folder icon to browse all files in a folder view. Tap on the star icon to access your favorite files. Note: Available features may differ depending on the Android OS version of your device. D-Link DIR-885L User Manual 44 Section 3 - Getting Started Documents The Documents section allows you to share, print, and view documents streamed from your DIR-885L to your mobile device. Tap the document icon on the main menu to browse the files on your mobile device. Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tap for additional options:
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap to delete it. D-Link DIR-885L User Manual 45 Section 3 - Getting Started Tap on a file to start the document viewer. In the viewer:
Tap the screen to bring up zoom in/out buttons. Drag the screen up or down to scroll between pages. Tap to perform File, Find, Zoom, Reading View, Go To Page, and Bookmarks actions. Note: Available actions may differ depending on your Android OS. D-Link DIR-885L User Manual 46 Section 3 - Getting Started The Pictures section allows you to view images streamed from your DIR-885L to your mobile device. Tap the camera icon on the main menu to browse your photo collection on your removable storage. Pictures Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to start a slideshow. Tap to refresh, sort, or mark files for deletion. Tap the star icon next to each file to download it to your device and add it into your Favorites section. Tap for additional options:
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap to delete it. D-Link DIR-885L User Manual 47 Section 3 - Getting Started Tap on an image file to start the image viewer. In the viewer:
Tap the star icon to download it to your device and add it into your Favorites section. Tap to start a slideshow. Tap the image to stop the slideshow. Tap to delete the current image. Tap OK to confirm. Tap to bring up additional options using other applications. Tap to access the image editor. Note: This function may vary depending on the version of your Android OS. D-Link DIR-885L User Manual 48 Section 3 - Getting Started The Videos section allows you to stream video clips and movies from your DIR-885L to your mobile device. Tap the movie icon on the main menu to browse your videos on your removable storage. Videos Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap the star icon next to a file to download it to your device and add it into your Favorites section. Tap for additional options:
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap this icon to delete it. D-Link DIR-885L User Manual 49 Section 3 - Getting Started Tap on a file to start playing it. Tap on the screen to bring up the scroll bar, pause button, and play button. Tap to resume playback. Tap to pause the video. Note: Available features may vary depending on the Android OS version installed on your device. D-Link DIR-885L User Manual 50 Section 3 - Getting Started The Music section allows you to stream songs from your DIR-885L to your mobile device. Tap the music icon on the main menu to browse your music collection on your removable storage. Music Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap to browse your playlists. Tap the star icon next to a file to download it to your device and add it into your Favorites section. Tap for additional options:
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap this icon to delete it. D-Link DIR-885L User Manual 51 Section 3 - Getting Started Tap on a file to start playing it. In the player:
Tap on the up/down arrow to show/hide the player controls. Tap to repeat all. Tap again to repeat a single song. Tap to skip to the previous/next song. Tap to play or pause the song. Tap to enable/disable shuffle mode. To create a playlist:
Tap Tap Add new playlist... Enter a name for the playlist, then tap OK. The name of the playlist will appear in the browser next to the icon. You can tap then to refresh the playlist page. D-Link DIR-885L User Manual 52 Section 3 - Getting Started To add songs to a playlist:
Tap a playlist to see its contents. Tap Add Music... to add songs to the current playlist. Tick the songs you wish to add and tap to save. To delete songs from the playlist:
Tap Edit in the playlist browser and mark the files to be deleted. Tap then tap OK to confirm. D-Link DIR-885L User Manual 53 Section 3 - Getting Started Folders You can browse your removable storage in a folder view in the folders section. Tapping the filename will open the viewer/player for that file type as described in the previous pages. You can also upload files from your mobile device to the removable storage attached to your router. Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to access file options. In the file browser:
Tap to return to the main menu. Tap to upload files. Tap to refresh, sort, create a new folder, or mark files for deletion and copying. D-Link DIR-885L User Manual 54 Section 3 - Getting Started Tap to select files and perform the following actions:
Tap to update the list of files. Tap to sort the files by name, size, type, or date. Tap to create a new folder. Mark a file then tap this icon to delete it. Mark a file then tap this icon to copy it. To delete files:
Tap on and tick the box next to a file for deletion. Tap on to delete your selected files. Tap OK to confirm. To copy files:
Tap on each file for copying. to select files for copying. Tick the box next to Tap on to browse to the destination. D-Link DIR-885L User Manual 55 Section 3 - Getting Started Tap Paste or Cancel. You can also tap New Folder if you wish to create a folder in the current directory. To create a new folder:
Browse to the directory you wish to create a new folder in. Tap Enter the name of the folder in the box, then tap OK. then
. D-Link DIR-885L User Manual 56 Section 3 - Getting Started To upload images and videos from your mobile device:
and browse to the file or files you wish to upload Browse to the folder you wish to upload to. Tap from the local device. Tick the box next to each of the files you wish to upload. Tap Upload. During the upload process, the size of the file and the upload progress will be displayed under the file name. To remove a file from the upload queue, tap the X next to it. D-Link DIR-885L User Manual 57 Section 3 - Getting Started The Favorites section allows you to quickly access your most often used files, no matter what file type, in a special section. Files added to the Favorites section will be copied here for playback in a centralized location. Favorites Search Bar:
Type in the name of a file to search for it. Tap to return to the main menu. Tap to refresh, sort, or mark files for deletion. Tap for additional options:
Tap to return to the main menu. Tap to update the list of files. Tap to sort the files by name, size, type, or date. Check a file then tap to delete it. D-Link DIR-885L User Manual 58 Section 3 - Getting Started Configuration To access the configuration utility, open a web-browser such as Internet Explorer and enter http://dlinkrouter.local. Windows and Mac users may also connect by typing the IP address of the router (by default this is http://192.168.0.1) in the address bar. Enter your password. If you previously followed the setup wizard (see page 13), please use the admin password you entered during the wizard. Otherwise, leave the password blank. Click Log In to proceed. Note: If you cannot remember your password and cannot log in, press the reset button
(see page 6) to restore the router to its default settings. The routers home page will open displaying its current connection status. The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link DIR-885L User Manual 59 Section 4 - Configuration Device Mode The DIR-885L can be placed into two device modes: Router Mode. The default mode is Router Mode. To change the device mode, in the Settings menu on the bar on the top of the page, click Internet to see the Internet configuration options. On the Device Mode drop-down menu, select either Router Mode . The router will then reboot into the new mode. Router Mode is the most commonly used mode, and unlocks all functionality. If you are unsure which mode to choose, select Router Mode. D-Link DIR-885L User Manual 60 Section 4 - Configuration The Home page displays the current status of the router in the form of an interactive diagram. You can click each icon to display information about each part of the network at the bottom of the screen. The menu bar at the top of the page will allow you to quickly navigate to other pages. Home The Home page displays whether or not the router is currently connected to the Internet. If it is disconnected, click Click to repair to bring up the setup wizard
(see page 13). Internet To bring up more details about your Internet connection, click on the Internet icon. Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection respectively. Click Release to disconnect from the Internet. If you do this and wish to reconnect, click Renew. To reconfigure the Internet settings, refer to page 65. D-Link DIR-885L User Manual 61 Section 4 - Configuration DIR-885L Click on the DIR-885L icon to view details about the router and its wireless settings. Here you can see the routers current wireless settings, as well as its MAC address and IPv4/IPv6 addresses. To reconfigure the network settings, either click Go to settings on the lower left, or click Settings (at the top of the page) and then Network on the menu that appears. Refer to page 96. To reconfigure the wireless settings, either click Go to settings, on the lower right, or click Settings (at the top of the page) and then Wireless on the menu that appears. Refer to page 92. D-Link DIR-885L User Manual 62 Section 4 - Configuration Connected Clients Click on the Connected Clients icon to view details about the router and its wireless settings. On this page you can see all the clients currently connected to the router, and their IP addresses. To edit each clients settings, click the pencil icon on the client you want to edit. Name:
Enter a custom name for this client. Vendor:
Displays the vendor of the device. MAC Address:
Displays the MAC address of the device. IP Address:
Enter a specific IP address for this client. Reserve IP:
Enable to reserve this IP address for this client. Parental Control:
Allow or Block access to the router. Click Save when you are done. D-Link DIR-885L User Manual 63 Section 4 - Configuration USB Device Click on the USB Device icon to view details about the currently connected USB device, DLNA media server, SharePort, and Windows File Sharing. If you have a USB device connected, you can see its name and how much free space it has. To configure your SharePort settings, click Go to settings and refer to page 98. D-Link DIR-885L User Manual 64 Section 4 - Configuration In the Settings menu on the bar on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start the router for the first time. Refer to page 13 for details. Settings Wizard Internet (Router Mode) In the Settings menu on the bar on the top of the page, click Internet to see the Internet configuration options. My Internet Connection Is:
Choose your Internet connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options. For Dynamic IP (DHCP) refer to page 66. For Static IP refer to page 67. For PPPoE refer to page 68. For PPTP refer to page 69. For L2TP refer to page 71. For DS-Lite refer to page 73. To configure an IPv6 connection, click the IPv6 link. Refer to page 74. D-Link DIR-885L User Manual 65 Section 4 - Configuration Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not give you an IP address to use. Dynamic IP (DCHP) Host Name:
The host name is optional but may be required by some ISPs. Leave it blank if you are not sure. Primary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. Secondary DNS Server:
Enter the secondary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address Clone:
The default MAC address is set to the Internet ports physical interface MAC address on the router. You can use the drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-885L User Manual 66 Section 4 - Configuration Select Static IP if your IP information is provided by your Internet service provider (ISP). Static IP IP Address:
Enter the IP address provided by your ISP. Subnet Mask:
Enter the subnet mask provided by your ISP. Default Gateway:
Primary DNS Server:
Secondary DNS Server:
Enter the default gateway address provided by your ISP. Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. MAC Address Clone:
The default MAC address is set to the Internet ports physical interface MAC address on the router. You can use drop-down menu to replace the Internet ports MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-885L User Manual 67 Section 4 - Configuration Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet service provider (ISP). PPPoE Username:
Enter the username provided by your ISP. Password:
Enter the password provided by your ISP. Reconnect Mode:
Select either Always-on, On-Demand, or Manual. Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-
reconnect. Address Mode:
Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. IP Address:
Enter the IP address provided by your ISP (Static IP only). Service Name:
Enter the ISP service name (optional). Primary DNS Server:
Secondary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-885L User Manual 68 Section 4 - Configuration Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password. PPTP PPTP Server IP Address:
Enter the PPTP server IP address provided by your ISP. Username:
Enter the username provided by your ISP. Password:
Enter the password provided by your ISP. Reconnect Mode:
Select either Always-on, On-Demand, or Manual. Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-
reconnect. Address Mode:
Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. PPTP IP Address:
PPTP Subnet Mask:
PPTP Gateway IP Address:
Primary DNS Server:
Enter the IP address provided by your ISP (Static IP only). Enter the subnet mask provided by your ISP (Static IP only). Enter the gateway IP address provided by your ISP (Static IP only). Enter the primary DNS server IP address assigned by your ISP. D-Link DIR-885L User Manual 69 Section 4 - Configuration Secondary DNS Server:
Enter the secondary DNS server IP address assigned by your ISP. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-885L User Manual 70 Section 4 - Configuration Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username and password. L2TP L2TP Server IP Address:
Enter the L2TP server IP address provided by your ISP. Username:
Enter the username provided by your ISP. Password:
Enter the password provided by your ISP. Reconnect Mode:
Select either Always-on, On-Demand, or Manual. Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-
reconnect. Address Mode:
Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. L2TP IP Address:
L2TP Subnet Mask:
L2TP Gateway IP Address:
Primary DNS Server:
Enter the IP address provided by your ISP (Static IP only). Enter the subnet mask provided by your ISP (Static IP only). Enter the gateway IP address provided by your ISP (Static IP only). Enter the primary DNS server IP address assigned by your ISP. D-Link DIR-885L User Manual 71 Section 4 - Configuration Secondary DNS Server:
Enter the secondary DNS server IP address assigned by your ISP. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-885L User Manual 72 Section 4 - Configuration DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for configuration:
DS-Lite DS-Lite Configuration:
Select DS-Lite DHCPv6 to let the router allocate the AFTR IPv6 address automatically. Select Manual Configuration to enter the AFTR IPv6 address manually. AFTR IPv6 Address:
If you selected Manual Configuration above, enter the AFTR IPv6 address used here. B4 IPv6 Address:
WAN IPv6 Address:
IPv6 WAN Default Gateway:
Enter the B4 IPv4 address value used here. Once connected, the WAN IPv6 address will be displayed here. Once connected, the IPv6 WAN default gateway address will be displayed here. Click Save when you are done. D-Link DIR-885L User Manual 73 Section 4 - Configuration IPv6 To configure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4. My Internet Connection Is:
Choose your IPv6 connection type from the drop-down menu. You will be presented with the appropriate options for your connection type. Click Advanced Settings... to expand the list and see all of the options. For Auto Detection refer to page 75. For Static IPv6 refer to page 77. For Auto Configuration (SLAAC/DHCPv6) refer to page 79. For PPPoE refer to page 81. For IPv6 in IPv4 Tunnel refer to page 83. For 6 to 4 refer to page 85. For 6rd refer to page 86. For Local Connectivity Only refer to page 88. D-Link DIR-885L User Manual 74 Section 4 - Configuration This is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISPs server. Some ISPs require you to make some settings on your side before your router can connect to the IPv6 Internet. Auto Detection DNS Type:
Select either Obtain DNS server address automatically or Use the following DNS address. Primary DNS Server:
If you selected Use the following DNS address above, enter the primary DNS server address. Secondary DNS Server:
If you selected Use the following DNS address above, enter the secondary DNS server address. Enable DHCP-
PD:
Enable or disable prefix delegation services. LAN IPv6 Address:
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the router. Displays the routers LAN link-local address. Enable or disable the Automatic IPv6 Address Assignment feature. Enable or disable automatic DHCP-PD services. LAN IPv6 Link-
Local Address:
Enable Automatic IPv6 Address Assignment:
Enable Automatic DHCP-PD in LAN:
D-Link DIR-885L User Manual 75 Section 4 - Configuration Auto Configuration Type:
Router Advertisement Lifetime:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-885L User Manual 76 Section 4 - Configuration Select Static IP if your IPv6 information is provided by your Internet service provider (ISP). Static IPv6 Use Link-Local Address:
IPv6 Address:
Enable or disable a link-local address. If you disabled Use Link-Local Address, enter the address supplied by your ISP. Subnet Prefix Length:
If you disabled Use Link-Local Address, enter the subnet prefix length supplied by your ISP. Enter the default gateway for your IPv6 connection. Enter the primary DNS server address. Enter the secondary DNS server address. Enter the LAN (local) IPv6 address for the router. Displays the routers LAN link-local address. Check to enable the Automatic IPv6 Address Assignment feature. Default Gateway:
Primary DNS Server:
Secondary DNS Server:
LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enable Automatic IPv6 Address Assignment:
D-Link DIR-885L User Manual 77 Section 4 - Configuration Auto Configuration Type:
Router Advertisement Lifetime:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-885L User Manual 78 Section 4 - Configuration Auto Configuration (SLAAC/DHCPv6) This is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISPs server. Some ISPs require you to make some settings on your side before your router can connect to the IPv6 Internet. DNS Type:
Select either Obtain DNS server address automatically or Use the following DNS address. Primary DNS Server:
If you selected Use the following DNS address above, enter the primary DNS server address. Secondary DNS Server:
If you selected Use the following DNS address above, enter the secondary DNS server address. Enable DHCP-
PD:
Enable or disable prefix delegation services. LAN IPv6 Address:
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the router. Displays the routers LAN link-local address. Enable or disable the Automatic IPv6 Address Assignment feature. Enable or disable automatic DHCP-PD services. LAN IPv6 Link-
Local Address:
Enable Automatic IPv6 Address Assignment:
Enable Automatic DHCP-PD in LAN:
D-Link DIR-885L User Manual 79 Section 4 - Configuration Auto Configuration Type:
Router Advertisement Lifetime:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6 Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-885L User Manual 80 Section 4 - Configuration Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet service provider (ISP). PPPoE PPPoE Session:
Choose Share with IPv4 to re-use your IPv4 PPPoE username and password, or Create a new session. Username:
If you selected Create a new session above, enter the PPPoE username provided by your ISP here. Password:
If you selected Create a new session above, enter the PPPoE password provided by your ISP here. Address Mode:
Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. IP Address:
Enter the IP address provided by your ISP (Static IP only). MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. DNS Type:
Select either Obtain DNS server address automatically or Use the following DNS address. Primary DNS Server:
If you selected Use the following DNS address above, enter the primary DNS server address. Secondary DNS Server:
If you selected Use the following DNS address above, enter the secondary DNS server address. Enable DHCP-
PD:
Enable or disable prefix delegation services. D-Link DIR-885L User Manual 81 Section 4 - Configuration LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enable Automatic IPv6 Address Assignment:
Auto Configuration Type:
Router Advertisement Lifetime:
Enter the LAN (local) IPv6 address for the router. Displays the routers LAN link-local address. Enable or disable the Automatic IPv6 Address Assignment feature. Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6 Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-885L User Manual 82 Section 4 - Configuration The user can configure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates IPv6 packets in IPv4 packets so that IPv6 packets can be sent over an IPv4 infrastructure. IPv6 in IPv4 Tunnel Remote IPv4 Address:
Remote IPv6 Address:
Local IPv4 Address:
Local IPv6 Address:
Subnet Prefix Length:
Enter the IPv4 remote address you will use. Enter the IPv6 remote address you will use. Enter the IPv4 local address you will use. Enter the IPv6 local address you will use. Enter the subnet prefix length supplied by your ISP. DNS Type:
Select either Obtain DNS server address automatically or Use the following DNS address. Primary DNS Server:
If you selected Use the following DNS address above, enter the primary DNS server address. Secondary DNS Server:
If you selected Use the following DNS address above, enter the secondary DNS server address. Enable DHCP-
PD:
Enable or disable prefix delegation services. LAN IPv6 Address:
If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the router. D-Link DIR-885L User Manual 83 Section 4 - Configuration LAN IPv6 Link-
Local Address:
Enable Automatic IPv6 Address Assignment:
Enable Automatic DHCP-PD in LAN:
Auto Configuration Type:
Router Advertisement Lifetime:
Displays the routers LAN link-local address. Enable or disable the Automatic IPv6 Address Assignment feature. Enable or disable automatic DHCP-PD services. Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6 Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-885L User Manual 84 Section 4 - Configuration In this section the user can configure the IPv6 6 to 4 connection settings. 6to4 is an IPv6 address assignment and automatic tunneling technol-
ogy that is used to provide unicast IPv6 connectivity between IPv6 sites and hosts across the IPv4 Internet. 6 to 4 6 to 4 Address:
Displays the 6 to 4 address. 6 to 4 Relay:
Enter the 6 to 4 relay supplied by your ISP. Primary DNS Server:
Secondary DNS Server:
LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enable Automatic IPv6 Address Assignment:
Auto Configuration Type:
Router Advertisement Lifetime:
Enter the primary DNS server address. Enter the secondary DNS server address. Enter the LAN (local) IPv6 address for the router. Displays the routers LAN link-local address. Check to enable the Automatic IPv6 Address Assignment feature. Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6 Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-885L User Manual 85 Section 4 - Configuration In this section the user can configure the IPv6 6rd connection settings. 6rd Assign IPv6 Prefix:
Primary DNS Server:
Secondary DNS Server:
Currently unsupported. Enter the primary DNS server address. Enter the secondary DNS server address. Enable Hub and Spoke Mode:
Enable if you want to minimize the number of routes to the destination by using a hub and spoke method of networking. 6rd Configuration:
Choose the 6rd DHCPv4 Option to automatically discover and populate the data values, or Manual Configuration to enter the settings yourself. 6rd IPv6 Prefix:
Enter the 6rd IPv6 prefix and mask length supplied by your ISP
(manual configuration only). 6rd Border Relay IPv4 Address:
LAN IPv6 Address:
LAN IPv6 Link-
Local Address:
Enter the 6rd border relay IPv4 address settings supplied by your ISP
(manual configuration only). Enter the LAN (local) IPv6 address for the router. Displays the routers LAN link-local address. D-Link DIR-885L User Manual 86 Section 4 - Configuration Enable Automatic IPv6 Address Assignment:
Auto Configuration Type:
Router Advertisement Lifetime:
Check to enable the Automatic IPv6 Address Assignment feature. Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6 Enter the IPv6 address lifetime (in minutes). Click Save when you are done. D-Link DIR-885L User Manual 87 Section 4 - Configuration Local Connectivity Only allows you to set up an IPv6 connection that will not connect to the Internet. Local Connectivity Only Enable ULA:
Click here to enable Unique Local IPv6 Unicast Addresses settings. Use Default ULA Prefix:
Checking this box will automatically configure the ULA prefix for the default setting. ULA Prefix:
If you wish to choose your own ULA prefix, enter it here. Current IPv6 ULA Settings:
This section will display the current settings for your IPv6 ULA. Click Save when you are done. D-Link DIR-885L User Manual 88 Section 4 - Configuration Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP does not give you an IP address to use. Dynamic IP (DCHP) Host Name:
The host name is optional but may be required by some ISPs. Leave it blank if you are not sure. Primary DNS Server:
Enter the primary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. Secondary DNS Server:
Enter the secondary DNS server IP address assigned by your ISP. This address is usually obtained automatically from your ISP. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-885L User Manual 90 Section 4 - Configuration Select Static IP if your IP information is provided by your Internet service provider (ISP). Static IP IP Address:
Enter the IP address provided by your ISP. Subnet Mask:
Enter the subnet mask provided by your ISP. Default Gateway:
Primary DNS Server:
Secondary DNS Server:
Enter the default gateway address provided by your ISP. Enter the primary DNS server IP address assigned by your ISP. Enter the secondary DNS server IP address assigned by your ISP. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-885L User Manual 91 Section 4 - Configuration Wireless (Router Mode) In the Settings menu on the bar on the top of the page, click Wireless to see the wireless configuration options. To configure the routers guest zone, click the Guest Zone link. Refer to page 94 for details. Click Advanced Settings... to expand the list and see all of the options. The following options apply to both the 2.4 GHz and the 5 GHz wireless frequency bands:
Status:
Enable or disable the wireless frequency band. Wi-Fi Name
(SSID):
Password:
Create a name for your wireless network using up to 32 characters. Create a password to use for wireless security. Wireless clients will need to enter this password to successfully connect to the network. Security Mode:
Choose None, WEP, or WPA/WPA2-(Personal) (recommended). 802.11 Mode:
Select the desired wireless networking standards to use. The available options will depend on the wireless frequency band, as well as the currently selected security mode. Wi-Fi Channel:
Select the desired channel. The default is Auto (recommended). Transmission Power:
Channel Width:
Select the desired wireless transmission power. Select Auto 20/40 if you are using both 802.11n and non-802.11n wireless devices, or select 20 MHz if you are not using any 802.11n wireless clients. Visibility Status:
The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. D-Link DIR-885L User Manual 92 Section 4 - Configuration Schedule:
Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section (refer to page 113). Click Save when you are done. D-Link DIR-885L User Manual 93 Section 4 - Configuration Guest Zone The guest zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands. In the Settings menu on the bar on the top of the page, click Wireless, then click the Guest Zone link. Click Advanced Settings... to expand the list and see all of the options. The following options apply to both the 2.4 GHz and the 5 GHz wireless frequency bands:
Status:
Enable or disable the guest zone for each wireless frequency band. Wi-Fi Name
(SSID):
Enter a wireless network name (SSID) that is different from your main wireless network. Password:
Create a password to use for wireless security. Wireless clients will need to enter this password to successfully connect to the guest zone. Internet Access Only:
Enabling this option will confine connectivity to the Internet, disallowing guests from accessing other local network devices. Click Save when you are done. D-Link DIR-885L User Manual 94 Section 4 - Configuration Network This section will allow you to change the local network settings of the router and to configure the DHCP settings. In the Settings menu on the bar on the top of the page, click Network. Click Advanced Settings... to expand the list and see all of the options. LAN IP Address:
Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Save, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask:
Enter the subnet mask of the router. The default subnet mask is 255.255.255.0. Management Link:
The default address to access the routers configuration is http://dlinkrouter.local. Here, you can replace dlinkrouter with a name of your choice. Local Domain Name:
Enter the domain name (optional). Enable DNS Relay:
Disable to transfer the DNS server information from your ISP to your computers. If enabled, your computers will use the router for a DNS server. Status:
Enable or disable the DHCP server. DHCP IP Address Range:
Enter the starting and ending IP addresses for the DHCP servers IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. D-Link DIR-885L User Manual 96 Section 4 - Configuration DHCP Lease Time:
Enter the length of time for the IP address lease in minutes. Always Broadcast:
Enable this feature to broadcast your networks DHCP server to LAN/
WLAN clients. UPnP:
Enable or disable Universal Plug and Play (UPnP). UPnP provides compatibility with networking equipment, software and peripherals. WAN Port Speed:
You may set the port speed of the Internet port to 10 Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended). IPv4 Multicast Stream:
Enable to allow IPv4 multicast traffic to pass through the router from the Internet. IPv6 Multicast Stream:
Enable to allow IPv6 multicast traffic to pass through the router from the Internet. Click Save when you are done. D-Link DIR-885L User Manual 97 Section 4 - Configuration SharePort This page will allow you to set up access to files on an external USB device plugged into the router. You can do this through the local network or from the Internet using either a web browser or an app on your smartphone or tablet. In the Settings menu on the bar on the top of the page, click SharePort. Status:
Check to enable DLNA media server functions, allowing connected clients access to media files over the network. DLNA Media Server:
Choose a name for your DLNA media server so that it can be found. Windows File Sharing
(SAMBA):
Choose either Allow all users to access (no password) or Require routers admin password to specify whether the routers password will be required for access. Web File Access:
Enable remote access to files stored on a USB device plugged into the router through a web browser. Direct Links:
This area will display the HTTP and HTTPS links to connect to your SharePort drive through a web browser from a device on your network. Click Save when you are done. To manage user accounts for SharePort access, click Create User and refer to the next page for details. D-Link DIR-885L User Manual 98 Section 4 - Configuration Create User The Create User page allows you to manage your SharePort user accounts. The current list of user accounts will be displayed, along with their current permissions and access path. If they do not have an account set up, users will be restricted to guest access;
only having access to the Guest folder on the media server. The router can store a maximum of ten accounts (including the Admin account). If you wish to remove an account, click on its trash can icon in the Delete column. If you wish to edit an account, click on its pencil icon in the Edit column. If you wish to create a new account, click the Create User button. If you edit or create a user, the following options will appear:
User Name:
Enter the desired user name for the new account. Password:
Enter the password which the user will need to enter when logging in. Permission:
Select either Read Only or Read/Write to control whether the user can edit, add, or delete files on the device. Folder:
Choose the parent folder that the user will be able to access. Files and folders on a higher level will be unavailable. root means that the user can access all files on the device. To change the selected folder, click Browse and browse to the desired folder. Click OK when you are done. The new user should be added to the list of user accounts. To save the new list, click Save. To return to the SharePort page, click SharePort. D-Link DIR-885L User Manual 99 Section 4 - Configuration mydlink Enabling mydlink will allow you to access and manage the mydlink-compatible devices on your network. This can be done either through a web browser or via a smartphone app. This page allows you to sign in to an existing mydlink account, or sign up for a new mydlink account. In the Settings menu on the bar on the top of the page, click mydlink. If you do not already have a mydlink account, click No, I want to create a new mydlink account. Fill out your email address (which will also function as your username), choose a password, and enter your first and last name. Then, click Sign Up to create your new mydlink account. If you already have a mydlink account, click Yes, I have a mydlink account. Enter your email address (which is also your username) and your password. Then, click Sign In to register your existing mydlink account with your router. D-Link DIR-885L User Manual 100 Section 4 - Configuration Features QoS Engine This section will allow you to prioritize particular clients over others, so that those clients receive higher bandwidth. For example, if one client is streaming a movie and another is downloading a non-urgent file, you might wish to assign the former device a higher priority than the latter so that the movie streaming is not disrupted by the traffic of the other devices on the network. In the Features menu on the bar on the top of the page, click QoS Engine. Under All Devices, you will see device cards representing each connected client. If some are off-screen, you can use the < and > buttons to scroll through the cards. A maximum of one device can be assigned Highest priority. A maximum of two devices can be assigned High priority. A maximum of eight devices can be assigned Medium priority. If no devices are explicitly assigned a priority, they will all be treated with equal priority. If some devices are not assigned a priority and others are, the unassigned devices will be treated with the lowest priority. To assign a priority level to a device, drag the device card from the All Devices list over an empty slot and release the mouse button. The card will remain in the slot. If you want to remove a priority assignment from a device and return it to the All Devices list, click the cross icon in the top right of the device card. Click Save when you are done. D-Link DIR-885L User Manual 101 Section 4 - Configuration Firewall Settings The routers firewall protects your network from malicious attacks over the Internet. In the Features menu on the bar on the top of the page, click Firewall Settings. Click Advanced Settings... to expand the list and see all of the options. Enable DMZ:
Enable or disable Demilitarized Zone (DMZ). This completely exposes the client to threats over the Internet, and is not recommended in ordinary situations. DMZ IP Address:
If you enabled DMZ, enter the IP address of the client you wish to expose, or use the drop-down menu to quickly select it. Enable SPI IPv4:
Enabling Stateful Packet Inspection (SPI) helps to prevent cyber attacks by validating that the traffic passing through the session conforms to the protocol. Enable Anti-Spoof Checking:
IPv6 Simple Security:
IPv6 Ingress Filtering:
Enable this feature to protect your network from certain kinds of spoofing attacks. Enable or disable IPv6 simple security. Enable or disable IPv6 ingress filtering. PPTP:
Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol. D-Link DIR-885L User Manual 102 Section 4 - Configuration IPSec (VPN):
Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal. RTSP:
Allows applications that uses Real Time Streaming Protocol (RTSP) to receive streaming media from the Internet. SIP:
Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DIR-885L User Manual 103 Section 4 - Configuration IPv4/IPv6 Rules The IPv4/IPv6 Rules section is an advanced option that lets you configure what kind of traffic is allowed to pass through the network. To configure the IPv4 rules, from the Firewall Settings page click IPv4 Rules. To configure IPv6 rules, from the Firewall Settings page click IPv6 Rules. To return to the main Firewall Settings page, click Security Check. To begin, use the drop-down menu to select whether you want to ALLOW or DENY the rules you create. You can also choose to turn filtering OFF. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule. Source IP Address Range:
Enter the source IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address. Destination IP Address Range:
Enter the destination IP address range that the rule will apply to, and using the drop-down menu, specify whether it is a WAN or LAN IP address. Port Range:
Select the protocol of the traffic to allow or deny (Any, TCP, or UDP) and then enter the range of ports that the rule will apply to. Schedule:
Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section (refer to page 113). Click OK when you are done. D-Link DIR-885L User Manual 104 Section 4 - Configuration Port Forwarding Port forwarding allows you to specify a port or range of ports to open for specific devices on the network. This might be necessary for certain applications to connect through the router. In the Features menu on the bar on the top of the page, click Port Forwarding. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule. Local IP:
Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. TCP Port:
Enter the TCP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000). UDP Port:
Enter the UDP ports that you want to open. You can enter a single port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000). Schedule:
Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section (refer to page 113). Click OK when you are done. D-Link DIR-885L User Manual 105 Section 4 - Configuration Virtual Server The virtual server allows you to specify a single public port on your router for redirection to an internal LAN IP Address and Private LAN port. To configure the virtual server, from the Port Forwarding page click Virtual Server. To return to the main Port Forwarding page, click Port Forwarding. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule. Local IP:
Enter the IP address of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. Protocol:
Select the protocol of the traffic to allow or deny (TCP, UDP, Both, or Other). Protocol Number:
If you entered Other above, enter the protocol number. External Port:
Enter the public port you want to open. Internal Port:
Enter the private port you want to open. Schedule:
Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section (refer to page 113). Click OK when you are done. D-Link DIR-885L User Manual 106 Section 4 - Configuration Website Filter The website filter settings allow you to block access to certain web sites. You can either create a list of sites to block, or create a list of sites to allow (with all other sites being blocked). In the Features menu on the bar on the top of the page, click Website Filter. If you want to create a list of sites to block, select DENY computers access to ONLY these sites from the drop-down menu. All other sites will be accessible. If you want to specify a list of sites to allow, select ALLOW computers access to ONLY these sites from the drop-down menu. All other sites will be blocked. You may specify a maximum of fifteen web sites. To add a new site to the list, click Create New Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link DIR-885L User Manual 107 Section 4 - Configuration Static Routes The Static Routes section allows you to define custom routes to control how data traffic is moved around your network. In the Features menu on the bar on the top of the page, click Static Routes. To configure IPv6 rules, click IPv6 and refer to page 109. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule. Destination IP:
Enter the IP address of packets that will take this route. Netmask:
Enter the netmask of the route. Gateway:
Enter your next hop gateway to be taken if this route is used. Metric:
The route metric is a value from 1 to 16 that indicates the cost of using this route. A value 1 is the lowest cost and 15 is the highest cost. Interface:
Select the interface that the IP packet must use to transit out of the router when this route is used. Click OK when you are done. D-Link DIR-885L User Manual 108 Section 4 - Configuration IPv6 To configure IPv6 rules, on the Static Routes page click IPv6. To return to the main IPv4 static routes page, click IPv4. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Name:
Enter a name for the rule. DestNetwork:
This is the IP address of the router used to reach the specified destination. PrefixLen:
Enter the IPv6 address prefix length of the packets that will take this route. Metric:
Enter the metric value for this rule here. Interface:
Select the interface that the IP packet must use to transit out of the router when this route is used. Click OK when you are done. D-Link DIR-885L User Manual 109 Section 4 - Configuration Dynamic DNS Most Internet service providers (ISPs) assign dynamic (changing) IP addresses. Using a dynamic DNS service provider, people can enter your domain name in their web browser to connect to your server no matter what your IP address is. In the Features menu on the bar on the top of the page, click Dynamic DNS. Enable Dynamic DNS:
Enabling dynamic DNS will reveal further configuration options. Status:
Displays the current dynamic DNS connection status. Server Address:
Enter the address of your dynamic DNS server, or select one from the drop-down menu. Host Name:
Enter the host name that you registered with your dynamic DNS service provider. User Name:
Enter your dynamic DNS username. Password:
Enter your dynamic DNS password. Time Out:
Enter a timeout time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to page 111. D-Link DIR-885L User Manual 110 Section 4 - Configuration IPv6 Host The IPv6 host settings are found at the bottom of the Dynamic DNS page. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following options will appear:
Host Name:
Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address:
Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click OK when you are done. D-Link DIR-885L User Manual 111 Section 4 - Configuration Management Time & Schedule Time The Time page allows you to configure, update, and maintain the correct time on the internal system clock. From here you can set the time zone, the Network Time Protocol (NTP) server, and enable or disable daylight saving time. In the Management menu on the bar on the top of the page, click Time & Schedule. Time Zone:
Select your time zone from the drop-down menu. Time:
Displays the current date and time of the router. Daylight Saving:
Update Time Using an NTP Server:
Enable or disable daylight saving time. Enable or disable to allow an NTP server on the Internet to synchronize the time and date with your router. If you enable this option, select an NTP server from the drop-down menu. To configure the routerstime and date manually, disable this option and use the drop-down menus that appear to input the time and date. Click Save when you are done. To configure and manage your schedules, click Schedule and refer to page 113. D-Link DIR-885L User Manual 112 Section 4 - Configuration Schedule Some configuration rules can be set according to a pre-configured schedule. To create, edit, or delete schedules, from the Time page click Schedule. To return to the Time page, click Time. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule, click the Add Rules button. Click Save when you are done. If you edit or create a rule, the following screen will appear:
First, enter the name of your schedule in the Name field. Each box represents one hour, with the time at the top of each column. To add a time period to the schedule, simply click on the start hour and drag to the end hour. You can add multiple days to the schedule, but only one period per day. To remove a time period from the schedule, click on the cross icon. Click OK when you are done. D-Link DIR-885L User Manual 113 Section 4 - Configuration System Log The router keeps a running log of events. This log can be sent to a Syslog server, and sent to your email address. In the Management menu on the bar on the top of the page, click System Log. Enable Logging to Syslog Server:
Syslog Server IP Address:
Check this box to send the router logs to a SysLog Server. If this is disabled, there will be no other options on this page. Enter the IP address for the Syslog server. If the Syslog server is connected to the router, select it from the drop-down menu to automatically populate the field. Enable Email Notification:
If you want the logs to be automatically sent to an email address, enable this option. Enter the settings for your email account. These are obtained from your email service provider. On Log Full:
If email notification is enabled, this option will set the router to send the log by email when the log is fully. On Schedule:
This option can be enabled to send an email according to a pre-
configured schedule. See below. Schedule:
If you enable On Schedule is enabled, use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section (refer to page 113). Click Save when you are done. D-Link DIR-885L User Manual 114 Section 4 - Configuration Admin This page will allow you to change the administrator (Admin) password and enable remote management. In the Management menu on the bar on the top of the page, click Admin. Password:
Enter a new password for the administrator account. You will need to enter this password whenever you configure the router using a web browser. Enable Graphical Authentication
(CAPTCHA):
Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your routers network settings. Enable HTTPS Server:
Check to enable HTTPS to connect to the router securely. This means to connect to the router, you must enter https://192.168.0.1 instead of http://192.168.0.1. Enable Remote Management:
Remote management allows the DIR-885L to be configured from the Internet by a web browser. A password is still required to access the web management interface. Remote Admin Port:
The port number used to access the DIR-885L is used in the URL. Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DIR-885L and 8080 is the port used for the web management interface. If you enable HTTPS Server, you must enter https:// as part of the URL to access the router remotely. Click Save when you are done. To load, save, or reset settings, or reboot the router, click System and refer to page 116. D-Link DIR-885L User Manual 115 Section 4 - Configuration System This page allows you to save the routers current configuration, load a previously saved configuration, reset the router to its factory default settings, or reboot the router. From the Admin page click System. To return to the Admin page, click Admin. Save Settings To Local Hard Drive:
Load Settings From Local Hard Drive:
Restore To Factory Default Settings:
This option will save the current router configuration settings to a file on your computer. This option will load previously saved router configuration file. This will overwrite the routers current configuration. This option will restore all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save Settings To Local Hard Drive button above. Reboot The Device:
Click to reboot the router. Click Save when you are done. D-Link DIR-885L User Manual 116 Section 4 - Configuration Upgrade This page will allow you to upgrade the routers firmware or language pack, either automatically or manually. To manually upgrade the firmware or language pack, you must first download the relevant file from http://support.dlink.com. In the Management menu on the bar on the top of the page, click Upgrade. Firmware Information:
The current firmwares version and date will be displayed. Check for New Firmware:
Click this button to prompt the router to automatically check for a new firmware version. If a newer version is found, it will prompt you to install it. Upgrade Firmware:
If you wish to upgrade manually, first download the firmware file you wish to upgrade to. Next, click the Upgrade Firmware button and browse to the file to install the new firmware. You can also browse to a language pack file to install a new language pack. D-Link DIR-885L User Manual 117 Section 4 - Configuration Statistics On the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments. In the Management menu on the bar on the top of the page, click Statistics. You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DIR-885L User Manual 118 Section 4 - Configuration Connect a Wireless Client to your Router WPS Button The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-885L router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the DIR-885L for about 1 second. The Internet LED on the front will start to blink. WPS Button Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be connected and your wireless connection will be secure with WPA2. D-Link DIR-885L User Manual 119 Section 5 - Connecting to a Wireless Network Windows 8 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DIR-885L User Manual 120 Section 5 - Connecting to a Wireless Network You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-885L User Manual 121 Section 5 - Connecting to a Wireless Network Windows 7 WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-885L User Manual 122 Section 5 - Connecting to a Wireless Network 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/
IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-885L User Manual 123 Section 5 - Connecting to a Wireless Network 5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-885L User Manual 124 Section 5 - Connecting to a Wireless Network WPS The WPS feature of the DIR-885L can be configured using Windows 7. Carry out the following steps to use Windows 7 to configure the WPS feature:
1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-885L User Manual 125 Section 5 - Connecting to a Wireless Network 3. Double-click the DIR-885L. 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Routers Web UI) and click Next. D-Link DIR-885L User Manual 126 Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-885L User Manual 127 Section 5 - Connecting to a Wireless Network 7. The following window appears while the Router is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the router has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-885L User Manual 128 Section 5 - Connecting to a Wireless Network Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another companys wireless utility, please refer to the user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-885L User Manual 129 Section 5 - Connecting to a Wireless Network WPA/WPA2 It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-885L User Manual 130 Section 5 - Connecting to a Wireless Network 3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-885L User Manual 131 Section 5 - Connecting to a Wireless Network Windows XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another companys utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows XP utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks. The utility will display any available wireless networks in your area. Click on a Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-885L User Manual 132 Section 5 - Connecting to a Wireless Network WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. D-Link DIR-885L User Manual 133 Section 5 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the WPA-
PSK Wi-Fi password and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. D-Link DIR-885L User Manual 134 Section 5 - Connecting to a Wireless Network Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-885L. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to these examples. 1. Why cant I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:
- Microsoft Internet Explorer 7 or higher
- Mozilla Firefox 3.5 or higher
- Google Chrome 8 or higher
- Apple Safari 4 or higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable, or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BLACKICE, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-885L User Manual 135 Section 6 - Troubleshooting Configure your Internet settings:
Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, leave the password box empty. D-Link DIR-885L User Manual 136 Section 6 - Troubleshooting 3. Why cant I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL. Click on Start and then click Run. Windows 95, 98, and Me users type in command (Windows NT, 2000, XP, Vista, and 7 users type in cmd) and press Enter (or click OK). Once the window opens, youll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472 D-Link DIR-885L User Manual 137 Section 6 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network were working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router follow the steps below:
Open your browser, enter the IP address of your router (192.168.0.1) and click OK. Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. Click on Setup and then click Manual Configure. To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-885L User Manual 138 Section 6 - Troubleshooting Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DIR-885L User Manual 139 Appendix A - Wireless Basics What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work?
Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networksl: Wireless Local Area Network
(WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-885L User Manual 140 Appendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether its for home, office, business, D-Link has a wireless solution for it. Home Uses/Benefits Gives everyone at home broadband access Surf the web, check email, instant message, etc. Gets rid of the cables around the house Simple and easy to use Stay on top of everything at home as you would at office Remotely access your office network from home Share Internet connection and printer with multiple computers No need to dedicate office space Small Office and Home Office Uses/Benefits D-Link DIR-885L User Manual 141 Appendix A - Wireless Basics Where is wireless used?
Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. Using a D-Link CardBus adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or access point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Link DIR-885L User Manual 142 Appendix A - Wireless Basics Security Dont let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up. Wireless Modes There are basically two modes of networking:
Infrastructure All wireless clients will connect to an access point or wireless router. Ad-hoc Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DIR-885L wireless network CardBus adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-hoc network contains only clients, such as laptops with wireless CardBus adapters. All the adapters must be in Ad-hoc mode to communicate. D-Link DIR-885L User Manual 143 Appendix A - Wireless Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-885L User Manual 144 Appendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1 Windows 7 -
Windows Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows XP -
Windows 2000 - From the desktop, right-click My Network Places > Properties. Connections. Click on Start > Control Panel > Network Connections. Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DIR-885L User Manual 145 Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-885L offers the following types of security:
WPA2 (Wi-Fi Protected Access 2) WPA (Wi-Fi Protected Access) WPA2-PSK (Pre-Shared Key) WPA-PSK (Pre-Shared Key) What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP:
Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and by adding an integrity-checking feature, ensures that the keys havent been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computers hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DIR-885L User Manual 146 Appendix B - Networking Basics Technical Specifications Device Interfaces 802.11 a/b/g/n/ac wireless LAN Four 10/100/1000 Gigabit LAN ports 10/100/1000 Gigabit WAN port USB 3.0 Antenna Types Standards Four dual-band dipole antennas and One internal antenna. IEEE 802.11ac (draft) IEEE 802.11n IEEE 802.11g IEEE 802.11b IEEE 802.11a IEEE 802.3 IEEE 802.3u USB Port Power 5 V / 0.9 A Operating Temperature 0 to 40 C (32 to 104 F) Humidity 95% maximum (non-condensing) Certifications FCC Class B CE Class B C-Tick DLNA IPv6 Ready Wi-Fi Protected Setup (WPS) Wi-Fi Multimedia (WMM) Compatible with Windows 8 Security WPA - Personal/Enterprise WPA2 - Personal/Enterprise Wi-Fi Protected Setup (WPS) PIN/PBC Power Input: 100 to 240 V AC, 50/60 Hz Output: 12 V , 3A 1 Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on countrys regulation. 3 The DIR-885L does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions. D-Link DIR-885L User Manual 147 Appendix C - Technical Specifications 6
This product uses the FCC Data API but is not endorsed or certified by the FCC