submitted | available | document details (if available) | source link |
---|---|---|---|
August 27 2019 | August 27 2019 | Adobe PDF Library 15.0 |
various | User Manual -1 | Users Manual | 423.53 KiB | August 27 2019 |
DSP-W320 Outdoor Wi-Fi Smart Plug Quick Installation Guide 1 Plug It In 2 Download The App 3 Log In 4 Add The Device DSP-W320 Outdoor Wi-Fi Smart Plug Wall Anchor x1 Screw x1 Quick Installation Card Quick Installation Guide mydlink New Users:
Tap Sign Up to register for a mydlink account. OR Plug the smart plug into a power outlet. Wait until the LED on the front changes from red to flashing amber. Download the mydlink app by searching for "mydlink" on the App Store or Google PlayTM. Note: This product is NOT COMPATIBLE with the other mydlink apps. Please install the app titled only "mydlink."
If you are a mydlink Lite user, sign in to the new app with the same username and password and your existing cameras will appear in the new app. Tap Add a Device from the navigation menu on the left-hand side. Scan the Setup Code on the Quick Installation Card and follow the on-screen instructions to complete the setup. Existing Users:
Sign in using your mydlink account. Mounting i Device Information
!
Precautions Minimum Requirements
?
FAQ 1 /
2 /
3 /
4 /
Place at the desired location at least 2 feet from the ground. Use a pencil to mark the hole behind the mounting tab. Use a 15/64" drill bit to drill a 1-inch deep hole over the pencil mark. Insert the plastic anchor to support the screw. Twist the screw into the anchor. Leave 1/4" of the screw exposed from the wall. Align the screw with the hole on the mount. Slide the mount down to lock into place, allowing it to hang. Do not over tighten the screw. Right Socket Power Button
/ Power Status LED Electric shock can cause serious injury or death. Install only in a dry environment. Do not place near any source of water or potential flooding zones. Left Socket Power Button
/ Power Status LED Reset Button
/ System Status LED System Status LED Power Status LED Booting up / Resetting Switched on Connected to Wi-Fi Switched off Ready for setup / Disconnected Firmware being upgraded Plug into a grounded electrical outlet. Do not plug into an extension cord or power strip. If plugged into an outlet controlled by a wall switch, assure that the switch is left in the on position and is never turned off. Ensure that the plugs in the housing are facing downwards. Do not exceed the electrical ratings. Keep away from children and pets. Do not open the unit to modify or repair it. Unplug from wall socket before cleaning. To install this product, you will need:
A 802.11n/g router An Internet connection An e-mail account (required to register for mydlink service) The mydlink app is available for iPhone, iPad and Android devices. Please refer to the mobile app's store page to check whether your device is compatible. An available power outlet Wall space under the outlet to mount the device What do I do if my smart plug is not working properly?
Reset the smart plug and reinstall the smart plug. To reset your smart plug, press and hold the Reset button until the LED turns solid red. During installation, ensure that:
you have an Internet connection on your router your routers Wi-Fi is on your mobile device is connected to the Internet How can I use voice commands to control my smart plug?
The smart plug will work with both Amazon Alexa and the Google Assistant. For setup instructions on these services, visit the following websites:
Alexa:
https://www.dlink.com/en/alexa The Google Assistant:
https://www.dlink.com/en/google-assistant Support For troubleshooting tips and more information, visit:
Canada - http://support.dlink.ca USA - support.dlink.com 2019 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Product specification, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the package. Visit dlink.ca for more details. Version 1.00 (CA)_70X110 || June 6, 2019
This product uses the FCC Data API but is not endorsed or certified by the FCC