Table of Contents Table of Contents Product Overview........................................................ 4 Package Contents ................................................... 4 System Requirements ............................................. 4 Introduction.............................................................. 5 Features .................................................................. 7 Wireless Basics ........................................................... 8 Standards-Based Technology ................................. 9 Wireless Installation Considerations...................... 10 Four Operational Modes ........................................... 11 Getting Started...........................................................12
.............................................................14 Home > Basic Settings .......................................... 16 Wireless .......................................................... 16 Access Point mode ...................................... 16 WDS with AP mode ..................................... 18 WDS mode................................................... 20 Wireless Client mode ................................... 22 Open System/Shared Key authentication .... 23 WPA-Personal authentication ...................... 24 WPA-Enterprise authentication .................... 25 LAN ................................................................. 26 Home > Advanced Settings ................................... 27 Performance .................................................... 27 Multi-SSID........................................................ 29 VLAN ............................................................... 31 VLAN List ..................................................... 31 Port List ........................................................ 32 Add/Edit VLAN ............................................. 33 PVID Setting................................................. 34 Intrusion ........................................................... 35 Schedule.......................................................... 36 QoS.................................................................. 37 DHCP Server .................................................. 39 Dynamic Pool Settings ................................. 39 Static Pool Setting........................................ 41 Current IP Mapping List ............................... 43 Filters ............................................................... 44 Wireless MAC ACL ...................................... 44 WLAN Partition............................................. 45 Home > Status ...................................................... 46 Device Information........................................... 46 Client Information............................................. 47 WDS Information ............................................. 48 Stats................................................................. 49 Ethernet........................................................ 49 WLAN........................................................... 50 Log................................................................... 51 D-Link DAP-1353 User Manual 2 Table of Contents View Log ...................................................... 51 Log Settings ................................................. 52 Maintenance ......................................................... 53 Administrator Settings...................................... 53 Limit Administrator ....................................... 54 System Name Settings................................. 55 Login Settings .............................................. 56 Console Settings .......................................... 57 SNMP Settings............................................. 58
................ 59
.................................................. 60 Time and Date ....................................................... 61 System............................................................. 62 System Settings ........................................... 62 Help ....................................................................... 63 Troubleshooting ........................................................ 64 Networking Basics .................................................... 66 Check your IP address .......................................... 66 Statically Assign an IP address ............................. 67
........................................... 69 D-Link DAP-1353 User Manual 3 Section 1 - Product Overview Product Overview Package Contents
Note: with the DAP-1353 will cause damage and void the warranty for this product. System Requirements
, Macintosh Adapter
D-Link DAP-1353 User Manual 4 Section 1 - Product Overview Introduction
offers per-packet dynamic hashing. It also includes an integrity checking feature which ensures that the packets were not tampered with during wireless transmission.
D-Link DAP-1353 User Manual 5 Section 1 - Product Overview
XP operating system. You will need to use the same type of EAP protocol on all devices in your network when using the 802.1x feature.
data throughout rate. D-Link DAP-1353 User Manual 6 Section 1 - Product Overview
Four different operation modes -
Features
Better security with WPA -
versions.
AP Manager II management software - The real-time display of the network's topology and APs information
SNMP for management
Supports one 10/100/1000M Ethernet port.
D-Link DAP-1353 User Manual 7 Section 2 - Installation Wireless Basics
you.
Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards, allowing wireless users to use the same applications as those used on a wired network.
Mobility - productivity increases when people can have access to data in any location within the operating range of their
Low implementation costs - WLANs are easy to set up, manage, change and relocate. Networks that frequently
Installation and network expansion
Inexpensive solution - wireless network devices are as competitively priced as conventional Ethernet network devices.
Scalability
of wireless devices deployed. D-Link DAP-1353 User Manual 8 Section 2 - Installation Standards-Based Technology
transmissions.
speed and range.
materials and construction, and network overhead can lower actual data throughout rate. D-Link DAP-1353 User Manual 9 Section 2 - Installation Wireless Installation Considerations The D-Link AirPremier N wireless access point lets you access your network using a wireless connection from virtually
1
2
3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on the range. Try to position access points, wireless routers, and computers so that the signal passes
4 generate RF noise. 5
a signal even if the phone in not in use. D-Link DAP-1353 User Manual 10 Section 2 - Installation Four Operational Modes Access Point (AP) Create a wireless LAN WDS with AP WDS Wireless Client Wirelessly connect multiple networks while still functioning as a wireless AP Wirelessly connect multiple networks AP acts as a wireless network adapter for your Ethernet-enabled device D-Link DAP-1353 User Manual 11 Section 2 - Installation Getting Started
PCI slot on your desktop computer. 5. Install the drivers for your wireless CardBus adapter into a laptop computer. D-Link DAP-1353 User Manual 12 Section 2 - Installation
D-Link DAP-1353 User Manual 13 Section 3 - Conguration Conguration
Network Layout diagram
Access the Internet using a proxy server Control Panel >
Internet Options > Connections > LAN Settings
http://192.168.0.50 and press Enter. Make sure that the IP addresses of the DAP-1353 and your computer
Note: If you have changed the default IP address assigned to the DAP-1353, make sure to enter the correct IP address.
admin
Login. Note: If you have changed the password, make sure to enter the correct password. D-Link DAP-1353 User Manual 14 Section 3 - Conguration
Apply
Click the Apply D-Link DAP-1353 User Manual 15 Section 3 - Conguration Home > Basic Settings Wireless Access Point mode Wireless Band: 2.4 GHz Mode:
Select Access Point from the pull-down menu. The other three choices are WDS with AP, WDS, and Wireless Client. Network Name
(SSID):
setting is dlink to connect to an existing wireless network or to
SSID Visibility:
Enable or Disable
Auto Channel Selection:
performance. Enable channel selection process only occurs when the
Channel:
setting to Disable, and then use the pull-down menu to make the desired selection. Note: The wireless adapters will automatically scan and match the wireless settings. D-Link DAP-1353 User Manual 16 Section 3 - Conguration Channel Width:
Authentication:
Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz
Open System, Shared Key, WPA-Personal, or WPA-Enterprise. Select Open System to communicate the key across the network. Select Shared Key
Select WPA-Personal required. Select WPA-Enterprise D-Link DAP-1353 User Manual 17 Section 3 - Conguration WDS with AP mode In WDS with AP mode, the DAP-1353 wirelessly connects multiple networks while still functioning as a wireless AP. Wireless Band:
2.4GHz. Mode:
WDS with AP mode is selected from the pull-down menu. Network Name
(SSID):
factory default setting is dlink changed to connect to an existing wireless network or to
SSID Visibility:
Enable or Disable
Auto Channel Selection:
feature is not supported in WDS with AP mode. The channel selection process only occurs when the AP is
Channel:
All devices on the network must share the same channel. To change the channel, use the pull-down menu to make the
Channel Width:
Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless clients. Auto 20/40 MHz D-Link DAP-1353 User Manual 18 Section 3 - Conguration Remote AP MAC Address:
Site Survey:
Authentication:
Click on the Scan connect with.
Open System, Shared Key, or WPA-Personal. Select Open System to communicate the key across the network. Select Shared Key
Select WPA-Personal required. D-Link DAP-1353 User Manual 19 Section 3 - Conguration WDS mode In WDS mode, the DAP-1353 wirelessly connects multiple networks, without functioning as a wireless AP. Wireless Band: 2.4GHz. Mode:
WDS is selected from the pull-down menu. Network Name
(SSID):
designated for a specific wireless local area
setting is dlink to connect to an existing wireless network or to
SSID Visibility:
Enable or Disable
Auto Channel Selection:
performance. This feature is not supported in WDS mode. Channel:
All devices on the network must share the same channel. To change the channel, use the pull-down menu to make the desired selection. Channel Width:
20 MHz or Auto 20/40 MHz. Remote AP MAC Address:
D-Link DAP-1353 User Manual 20 Section 3 - Conguration Site Survey:
Click on the Scan connect with. Authentication:
Open System, Shared Key, or WPA-Personal. Select Open System to communicate the key across the network. Select Shared Key to limit communication to only those devices that share the same WEP settings. Select WPA-Personal required. D-Link DAP-1353 User Manual 21 Section 3 - Conguration Wireless Band: 2.4 GHz Wireless Client mode Mode:
Wireless Client is selected from the pull-down menu. Network Name
(SSID):
The SSIDs factory default setting is dlink. The SSID
wireless network. SSID Visibility:
Wireless Client mode. Auto Channel Selection:
feature is not supported in Wireless Client mode. Channel:
the AP that the DAP-1353 is connected to when set to Wireless Client mode. Channel Width:
20 MHz or Auto 20/40 MHz. Site Survey:
Click on the Scan with. Authentication:
Open System or WPA-Personal. Select Open System to communicate the key across the network. Select WPA-Personal D-Link DAP-1353 User Manual 22 Section 3 - Conguration Open System/Shared Key Authentication Encryption:
encryption. Key Type*:
Select HEX or ASCII. Key Size:
Select 64 Bits or 128 Bits. Key Index (1-4):
active key. Key:
Input up to four keys for encryption. You will select one of these keys in the Key Index pull-down menu.
**Hexadecimal (HEX) digits consist of the numbers 0-9 and the letters A-F.
*ASCII (American Standard Code for Information Interchange) is a code that represents English letters using numbers ranging from 0-127. D-Link DAP-1353 User Manual 23 Section 3 - Conguration WPA-Personal authentication WPA Mode:
When WPA-Personal is selected for Authentication type, you must also select a WPA mode from the pull-
AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) and WPA2. Cipher Type:
When you select WPA-Personal, you must also select AUTO, AES, or TKIP from the pull down menu. Group Key Update:
valid. The default value of 1800 is recommended. PassPhrase:
When you select WPA-Personal, please enter a PassPhrase D-Link DAP-1353 User Manual 24 Section 3 - Conguration WPA-Enterprise authentication WPA Mode:
When WPA-Enterprise is selected, you must also
AUTO
(WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2) Cipher Type:
When WPA-Enterprise is selected, you must also
Auto, AES, or TKIP. Group Key Update Interval:
Select the interval during which the group key will
1800 is the recommended value as a lower interval may reduce data transfer rates. Network Access Protection:
RADIUS Server:
RADIUS Port:
RADIUS Secret:
Protection.
D-Link DAP-1353 User Manual 25 Section 3 - Conguration LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DAP-1353. These settings may
the LAN IP address if needed. The LAN IP address is
on the Internet. Get IP From:
Static IP (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DAP-1353. When Dynamic IP (DHCP) is selected,
once this selection is made. IP Address:
The default IP address is 192.168.0.50. Assign a static IP address that is within the IP address range of your network. Subnet Mask:
Default Gateway:
Enter the IP address of the gateway in your network. If there is a gateway in your network, please enter an IP address within the range of your network. D-Link DAP-1353 User Manual 26 Section 3 - Conguration Home > Advanced Settings Performance Wireless:
On or Off. Wireless Mode:
Data Rate*:
Mixed 802.11n, 802.11g and 802.11b, Mixed 802.11g and 802.11b and 802.11n Only
on the wireless LAN. The AP will adjust the
interference, the AP will step down the rate. This
Mixed 802.11g and 802.11b
Best (Up to 54), 54, 48, 36, 24, 18, 12, 9, 6, 11, 5.5, 2 or 1.
D-Link DAP-1353 User Manual 27 Section 3 - Conguration Beacon Interval
(25-500):
DTM Interval
(1-15):
Transmit Power:
100 a lower one can help a wireless client connect to an access point faster.
1 and 15. 1 is the default setting. DTIM is a countdown inform-
wireless coverage is intended for half of the area, then select 50%100%, 50%, 25%, or 12.5%. WMM (Wi-Fi Multimedia):
over a Wi-Fi network. Ack Time Out
(2.4 GHZ, 64~200) :
64 to 200 Short GI:
Select Enable or Disable increase the error rate in some installations due to increased sensitivity to radio-frequency installations. IGMP Snooping:
Select Enable or Disable
Link Integrity:
Select Enable or Disable.
Connection Limit:
Select Enable or Disable
this value, the DAP-1353 will not allow clients to associate with the AP. User Limit (0-64):
0-64
10 is recommended. The default setting is 20. D-Link DAP-1353 User Manual 28 Section 3 - Conguration Multi-SSID The device supports up to four multiple Service Set
Basic
> Wireless section. The SSIDs factory default setting is dlink
wireless network. Enable Multi-SSID:
Band:
setting. Index:
SSID:
You can select up to three multi-SSIDs. With the Primary SSID, you have a total of four multi-SSIDs.
setting is dlink. to connect to an existing wireless network or to
SSID Visibility:
Enable or Disable all network users. Security:
Open System, WPA-Personal, or WPA-Enterprise. For a detailed description of the Open System parameters please go to page 23. For a detailed description of the WPA-Personal parameters please go to page 24. For a detailed description of the WPA-Enterprise parameters please go to page 25. D-Link DAP-1353 User Manual 29 Section 3 - Conguration WMM (Wi-Fi Multimedia):
Encryption:
Select Enable or Disable. When you select Open SystemEnable and Disable. If Enable
Key Type:
Select HEX or ASCII. Key Size:
Select 64 Bits or 128 Bits. Key Index (1-4):
Key:
Input up to four keys for encryption. You will select one of these keys in the Key Index pull-down menu. WPA Mode:
When you select either WPA-Personal or WPA-Enterprise AUTO (WPA or WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use different algorithms. AUTO (WPA or WPA2)
Cipher Type:
Select Auto, AES, or TKIP from the pull-down menu. Group Key Update Interval:
1800 seconds is recommended. PassPhrase:
When you select WPA-Personal, please enter a PassPhrase Conrm PassPhrase:
RADIUS Server:
When you select WPA-Personal, please re-enter the PassPhrase entered in the previous item When you select WPA-Enterprise
RADIUS Port:
RADIUS Secret:
D-Link DAP-1353 User Manual 30 Section 3 - Conguration VLAN VLAN List
to VLANs as they are physical ports. Any packet which enters the DAP-1353 without a VLAN tag will have a VLAN tag inserted with a PVID.
VLAN Status:
Enable or Disable. Next, go to the Add/Edit VLAN add or modify an item on the VLAN List D-Link DAP-1353 User Manual 31 Section 3 - Conguration Port List
using must also support VLANs. As a prerequisite step,
VLAN Status:
go to the Add/Edit VLAN an item on the VLAN List Port Name:
The name of the port is displayed in this column. Tag VID:
The Tagged VID is displayed in this column. Untag VID:
PVID:
column. D-Link DAP-1353 User Manual 32 Section 3 - Conguration Add/Edit VLAN The Add/Edit VLAN Once you have made the desired changes, click the Apply VLAN Status:
VLAN ID:
1 and 4094 for the Internal VLAN. VLAN Name:
Enter the VLAN to add or modify. D-Link DAP-1353 User Manual 33 Section 3 - Conguration PVID Setting The PVID Setting
Apply VLAN Status:
Enable and Disable. PVID Auto Assign Status:
D-Link DAP-1353 User Manual 34 Section 3 - Conguration Intrusion The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Apply effect. AP List:
The choices include All, Valid, Neighbor, Rogue, and New. Detect:
network. D-Link DAP-1353 User Manual 35 Section 3 - Conguration Schedule The Wireless Schedule Settings window is used to add and modify scheduling rules on the device. Click the Apply Wireless Schedule:
scheduling feature. Name:
Enter a name for the new scheduling rule in the
Day(s):
All Week and Select Day(s). If the second option is selected,
effective on. All Day(s):
hours a day. Wireless:
Off and On. D-Link DAP-1353 User Manual 36 Section 3 - Conguration QoS
applications.
QoS (Quality of Service):
HTTP:
transfers for many common audio and video
media players. Automatic:
priority. D-Link DAP-1353 User Manual 37 Section 3 - Conguration Name:
Priority:
Background (BK), Best Effort (BE), Video (VI), or Voice (VO). Protocol:
Any, TCP, UDP, Both, IMCP, or Other. Host 1 IP Range:
Host 1 Port Range:
to TCP, UDP, or Both. Host 2 IP Range:
Host 2 Port Range:
when the Protocol is set to TCP, UDP, or Both. D-Link DAP-1353 User Manual 38 Section 3 - Conguration DHCP Server Dynamic Pool Settings
network. A Dynamic Pool allows wireless stations
needed or required in the network, the DAP-1353 is
Function Enable/
Disable:
assigns dynamic IP addresses to devices on
management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DAP-1353 to function as a DHCP server. IP Assigned From:
on your network. The Range of Pool (1-254):
Subnet Mask:
Gateway:
Enter the IP address of the gateway on the network. WINS:
determines the IP address of a network computer that has a dynamically assigned IP address. D-Link DAP-1353 User Manual 39 Section 3 - Conguration DNS:
www.dlink.com into IP addresses. Domain Name:
Lease Time
(60-31536000 sec):
D-Link DAP-1353 User Manual 40 Section 3 - Conguration Static Pool Setting
Function Enable/
Disable:
Assigned IP:
assigns IP addresses to wireless devices on
management and allows new wireless devices to receive IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DAP-1353 to function as a DHCP server.
IP address to a device every time you start up. The IP addresses assigned in the Static Pool
Dynamic Pool. After you have assigned a static IP address to a device via its MAC address, click Apply
edit or delete the device in this list. Assigned MAC Address:
Enter the MAC address of the device requesting association here. Subnet Mask:
D-Link DAP-1353 User Manual 41 Section 3 - Conguration Gateway:
WINS:
Specify the Windows Internet Naming ServiceINS is a system that
DNS:
such as www.dlink.com into IP addresses. Domain Name:
Specify the domain name for the network. D-Link DAP-1353 User Manual 42 Section 3 - Conguration Current IP Mapping List
assigned DHCP dynamic and static IP address pools.
server on the AP and assign dynamic and static IP address pools. Current DHCP Dynamic Prole:
These are IP address pools the DHCP server has assigned using the dynamic pool setting. Binding MAC Address:
Assigned IP Address:
Lease Time:
The MAC address of a device on the network that is assigned an IP address from the DHCP dynamic pool. The current corresponding DHCP-assigned IP address of the device. The length of time that the dynamic IP address
Current DHCP Static Pools:
These are the IP address pools of the DHCP server assigned through the static pool settings. Binding MAC Address:
Assigned IP Address:
Binding MAC Address:
Assigned IP Address:
The MAC address of a device on the network that is within the DHCP static IP address pool. The current corresponding DHCP-assigned static IP address of the device. The MAC address of a device on the network that is assigned an IP address from the DHCP dynamic pool. The current corresponding DHCP-assigned static IP address of the device. D-Link DAP-1353 User Manual 43 Section 3 - Conguration Filters Wireless MAC ACL Wireless Band:
Access Control List:
Select Disable Select Accept to accept only those devices with MAC addresses in the Access Control
rejected. Select Reject to reject the devices with MAC addresses on the Access Control List. All other
MAC Address:
Enter each MAC address that you wish to
Apply. MAC Address List:
When you enter a MAC address, it appears in this list. Highlight a MAC address and click Delete to remove it from this list. D-Link DAP-1353 User Manual 44 Section 3 - Conguration WLAN Partition Wireless Band:
Internal Station Connection:
The default value is Enable, which allows
cannot exchange data through the AP. Ethernet WLAN Access:
The default is Enable from the Ethernet to associated wireless devices
data to the Ethernet. D-Link DAP-1353 User Manual 45 Section 3 - Conguration Home > Status Device Information Device Information:
version and the device's MAC address. D-Link DAP-1353 User Manual 46 Section 3 - Conguration Client Information Client Information:
This window displays the wireless client information for clients currently connected to the DAP-1353.
communicating with the DAP-1353. SSID:
MAC:
Band:
Displays the SSID of the client. Displays the MAC address of the client.
connected to. Authentication:
used. Signal:
Displays the client's signal strength. Power Saving Mode:
Displays the status of the power saving feature. D-Link DAP-1353 User Manual 47 Section 3 - Conguration WDS Information WDS Information:
System information for clients currently connected to the DAP-1353.
communicating with the DAP-1353. Name:
Displays the SSID of the client. MAC:
Displays the MAC address of the client. Authentication:
used. Signal:
Status:
Displays the client's signal strength. Displays the status of the power saving feature. D-Link DAP-1353 User Manual 48 Section 3 - Conguration Stats Ethernet Ethernet Trafc Statistics:
This page displays transmitted and received
D-Link DAP-1353 User Manual 49 Section 3 - Conguration WLAN WLAN Trafc Statistics:
This page displays wireless network statistics for data throughput, transmitted and received frames, and frame errors. D-Link DAP-1353 User Manual 50 Section 3 - Conguration Log View Log View Log:
and network messages including a time stamp and message type. The log information
client associate and disassociate with AP,
500 logs. D-Link DAP-1353 User Manual 51 Section 3 - Conguration Log Settings Log Server/IP Address:
Enter the IP address of the server you would like to send the DAP-1353 log to. Log Type:
Wireless Activity, and Notice. D-Link DAP-1353 User Manual 52 Section 3 - Conguration Maintenance Administrator Settings Check one or more of the five main categories to display the various hidden administrator parameters
D-Link DAP-1353 User Manual 53 Section 3 - Conguration Limit Administrator Each of the five main categories display various hidden administrator parameters and settings. Limit Administrator VLAN ID:
allowed to log in from. Limit Administrator IP:
IP Range:
address. Enter the IP address range that the administrator
D-Link DAP-1353 User Manual 54 Section 3 - Conguration System Name Settings Each of the five main categories display various hidden administrator parameters and settings. System Name:
The name of the device. The default name is D-Link DAP-1353. Location:
The physical location of the device, e.g. 72nd Floor, D-Link HQ. D-Link DAP-1353 User Manual 55 Section 3 - Conguration Login Settings Each of the five main categories display various hidden administrator parameters and settings. User Name:
Enter a user name. The default is admin. Old Password:
When changing your password, enter the old password here. New Password:
When changing your password, enter the new password here. The password is case-sensitive.
Conrm Password:
Enter the new password a second time for
D-Link DAP-1353 User Manual 56 Section 3 - Conguration Console Settings Each of the five main categories display various hidden administrator parameters and settings. Status:
Console Protocol:
Select the type of protocol you would like to use, Telnet or SSH. Timeout:
Set to 1 Min, 3 Mins, 5 Mins, 10 Mins, 15 Mins or Never. D-Link DAP-1353 User Manual 57 Section 3 - Conguration SNMP Settings Each of the five main categories display various hidden administrator parameters and settings. Status:
Enter the private SNMP community string. Public Community String:
Private Community String:
D-Link DAP-1353 User Manual 58 Section 3 - Conguration Firmware and SSL Certication Upload Upload Firmware From Local Hard Drive:
The current firmware version is displayed
your local computer, use the Browse
Upload dont turn the power off while upgrading. Upload SSL Certication From Local Hard Drive:
Click Browse
Upload to the DAP-1353. D-Link DAP-1353 User Manual 59 Section 3 - Conguration Conguration File Upload File:
Click the Browse
Upload to apply the
Download Conguration File:
Click Download to save the current DAP-1353 configuration to your local computer. Note that if you save one configuration with the administrators password now, after resetting your DAP-1353, and then updating to this saved
D-Link DAP-1353 User Manual 60 Section 3 - Conguration Time and Date Current Time:
Displays the current time and date settings. Time Zone:
Enable Daylight Saving:
Daylight Saving Offset:
Daylight Saving period. Daylight Saving Dates:
Daylight Saving offset. Enable NTP Server:
an NTP server. NTP Server:
Enter the NTP server IP address. Set the Date and Time Manually:
You can either manually set the time for your AP here, or you can click the Copy Your Computers Time Settings
D-Link DAP-1353 User Manual 61 Section 3 - Conguration System System Settings Restart the Device:
Restore to Factory Default Settings:
Click Restart to restart the DAP-1353. Click Restore to factory default settings. D-Link DAP-1353 User Manual 62 Section 3 - Conguration Help:
Scroll down the Help page for topics and explanations. Help D-Link DAP-1353 User Manual 63 Section 6 - Troubleshooting Troubleshooting
XP. If
Sygate, Norton Personal Firewall, and Windows
D-Link DAP-1353 User Manual 64 Section 6 - Troubleshooting
Start > Settings > Control PanelInternet Options Icon. From the Security
Connection
OK.
AdvancedOK three times.
different computer.
logging in, the username is admin D-Link DAP-1353 User Manual 65 Appendix B - Networking Basics Networking Basics Check your IP address
Click on Start > Runcmd and click OK. At the prompt, type ipcong and press Enter.
the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings
adapters. If you are connecting to a wireless network at a
settings. D-Link DAP-1353 User Manual 66 Appendix B - Networking Basics Statically Assign an IP address
Step 1 WindowsStart > Settings > Control Panel > Network Connections
Start > Control Panel > Network Connections Windows VistaStart > Control Panel > Network and Internet > Network and Sharing Center > Manage network connections Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address IP address on your router.
D-Link DAP-1353 User Manual 67 Appendix B - Networking Basics Set Primary DNS the same as the LAN IP address of your router
enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DAP-1353 User Manual 68