E N G L I S H Hardware Overview Wireless AC750 Dual Band Gigabit Router DIR-818LW 4 3 1 2 5 6 7 8 Minimum Requirements Network Requirements:
An Ethernet-based broadband modem Connect your Router 1 Unplug the power to your DSL or Cable modem. 4 Plug the power back into your DSL or cable modem. Please wait about one minute before continuing. Web-based Confi guration Requirements:
Computer with the following:
Windows 8, Windows 7, Windows Vista, Windows XP SP3, or Mac OS X (v10.4) An installed Ethernet adapter or wireless adapter Supported Browsers:
Internet Explorer 7 Safari 4 Chrome v20.0 Firefox v12.0 Modem 2 Connect an Ethernet cable from the Internet port of the router to the Ethernet port on your DSL or Cable modem. Modem Computer WPS 1 2 LAN 3 4 INTERNET USB POWER 12V 2A DIR-818L Package Contents DIR-818L Wireless AC750 Dual Band Gigabit Router Power Adapter Ethernet Cable Wi-Fi Confi guration Card Quick Install Guide If any of the above items are missing, please contact your reseller. 9 Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. 1 Power LED 2 Internet LED 3 USB Port 4 WPS Button A solid green light indicates a proper connection to the power supply. The light will be solid orange during boot-up and will blink green during the WPS process. A solid light indicates a connection to the Internet port. If the LED is orange, the connection is good but the router cannot connect to the Internet. If this LED is blinking orange, this indicates that the on demand connection type is set and the Internet connection is idle. Connect a USB fl ash drive to share content throughout your network. Press to start the WPS process. The Power LED will start to blink. 5 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, 6 Internet Port 7 Power Button 8 Power Port 9 Reset Button and game consoles. Connect your broadband modem to this port using an Ethernet cable. Press to power the router on and off . Connect the supplied power adapter. Press and hold the reset button with a paper clip for six seconds to reset the router to the factory default settings. mydlink Requirements:
iPhone/iPad/iPod Touch (iOS 4.3 or higher) Android device (1.6 or higher) Web Browser Requirements:
Internet Explorer 7 or higher Safari 5 or higher Chrome Firefox Note: To learn more about mydlink, visit http://www.mydlink.com. Before you Start Users with DSL providers - If you are using a PPPoE connection, you will need your PPPoE user name and password. If you do not have this information, contact your Internet provider. Do not proceed until you have this information. Users with Cable providers - Make sure you unplug the power to your modem. In some cases, you may need to turn it off for up to 5 minutes. Advanced Users - If your ISP provided you with a modem/router combo, you will need to set it to bridge mode so the DIR-818L router can work properly. Please contact your ISP or refer to the user manual for your modem/router device. Ethernet Cable Ethernet Port WPS 1 2 LAN 3 4 INTERNET USB POWER 12V 2A T DIR-818L Modem 3 Connect another Ethernet cable from the Ethernet port on your computer to one of the LAN ports on the router. 5 Plug the power adapter into your router and connect to an available power outlet or surge protector. If the Power LED does not light up, press the Power button on the back of the router. Internet Port (yellow) Modem Computer WPS 1 2 LAN 3 4 INTERNET USB POWER 12V 2A DIR-818L WPS 1 2 LAN 3 4 INTERNET USB POWER 12V 2A DIR-818L Ethernet Cable Computer 6 After the router has powered up, verify that the Power (green) and Internet
(orange or green) LEDs are both lit then continue with the Confi guration section on the other side. Configuration There are two ways to configure your router:
A. Web Browser - Use a web browser from your computer. B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app. Refer to the QRS Mobile Setup section for more information. 4 Cable users (DHCP) click Next to continue. B. QRS Mobile Setup 1 Scan the code below or search QRS Mobile (App Store or Google Play) to download the QRS Mobile App to your iPhone, iPad, or Android device. A. Web Browser Configuration 1 2 Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and enter http://dlinkrouter.local. /. You can also enter the IP address of the router (http://192.168.0.1). DSL (PPPoE) users enter your PPPoE user name and password supplied by your ISP. Click Next to continue. iOS Android QRS Mobile App 2 Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the wireless network name as listed on the supplied Wi-Fi Configuration card/sticker. Select the network and then enter the Wi-Fi Password. When the Welcome screen appears, click Next to continue. 5 For both the 2.4GHz and 5GHz bands, create a name for your Wi-Fi Network and a password. Your wireless devices (i.e., tablets, smartphones, and laptops) will need to have this information entered to be able to connect to your wireless network. Wi-Fi Name(SSID) 2.4Ghz:
dlink-2C1B Wi-Fi Name(SSID) 5GHz:
dlink-2C1B-5GHz Password:gccnu80856 3 If the router automatically detects your Internet connection type, skip to step 5. If not, then select your Internet connection and click Next to continue. 6 Continue with the Setup Wizard to finish configuring your DIR-818L router. Once completed, the Internet LED will turn green indicating that your router is connected to the Internet. Note: Setting up mydlink is optional and not required for the router to function. Congratulations! You have completed the router installation. 3 4 Once connected, click on the QRS Mobile icon from your mobile device, then click Start to continue. Please follow the on-screen instructions to complete the setup. Once the Setup Complete screen appears, click Save and write down the new Wi-Fi Network name and password on your companion card for future reference. Note: To reconnect to your router, launch your wireless utility, select the new Wi-Fi Network you created, and then enter your new Wi-Fi password. Troubleshooting How do I connect my wireless devices to the DIR-818L router?
1. Open your wireless network utility that displays available wireless networks. 2. Select the Wi-Fi Network name you assigned in the wizard and connect. Note: If you did not run the setup wizard or you reset the router to its default settings, refer to the Wi-Fi Configuration Card included for the default Wi-Fi Network Name and Wi-Fi Password. You can also connect using WPS:
1. Press the WPS button on the DIR-818L for three seconds. 2. Within one minute press the WPS button on your wireless device. 3. Allow up to two minutes to connect. Note: Some devices may require you to log in to a utility to start the WPS process. Refer to the user manual of the device you want to connect to the router if you do not know how to start the WPS process. How do I change the wireless settings on the DIR-818L router?
1. Open a web browser (e.g., Internet Explorer, Chrome, Firefox, or Safari) and enter http://dlinkrouter.local./. You can also enter the IP address of the router (http://192.168.0.1). 2. At the login screen, select admin from the user name drop-down and enter the router password you created in the wizard (no password by default). 3. Go to Setup > Wireless Settings > Manual Wireless Network Setup to create a new Wi-Fi network name (SSID) and Wi-Fi password. Documentation available at http://www.dlink.ca Technical Support Having trouble installing your new product? D-Links website contains the latest user documentation and software updates for D-Link products. U.S. and Canadian customers can contact D-Link Technical Support through our website or by phone. United States Internet: http://support.dlink.com Canada Internet: http://support.dlink.ca Copyright 2013 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Android is a trademark of Google, Inc. Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard 802.11ac (Draft), 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. Product specifications, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the packaging. Visit www. dlink.ca for more details. GPL Code Statement This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public License (GPL) or GNU Lesser General Public License (LGPL). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to you at:
http://tsd.dlink.com.tw/GPL.asp The GPL code and LGPL code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL. Written Offer for GPL and LGPL Source Code Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL. Please direct all inquiries to:
Email:
GPLCODE@dlink.com Snail Mail:
Attn: GPLSOURCE REQUEST D-Link Systems, Inc. 17595 Mt. Herrmann Street Fountain Valley, CA 92708 GNU GENERAL PUBLIC LICENSE Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html Version 1.0 | November 27, 2013 ENGLISH FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor environment only. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. IC Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection d'autres canaux n'est pas possible. This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. NCC Statement 5.25
-5.35 GHz MPE 1mW/cm20.068495 mW/cm2