all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 2.80 MiB | ||||
1 2 |
|
User Manual 2 | Users Manual | 406.30 KiB | ||||
1 2 |
|
Internal Photos | Internal Photos | 538.20 KiB | ||||
1 2 |
|
External Photos | External Photos | 830.23 KiB | ||||
1 2 |
|
Label and label location | ID Label/Location Info | 559.08 KiB | ||||
1 2 |
|
Authorization Letter | Cover Letter(s) | 185.32 KiB | ||||
1 2 |
|
Declaration of authorization | Cover Letter(s) | 18.54 KiB | ||||
1 2 |
|
FCC DOC | Cover Letter(s) | 733.46 KiB | ||||
1 2 | RF Exposure Info | |||||||
1 2 | RF Exposure Info | |||||||
1 2 |
|
Request for non-disclosure | Cover Letter(s) | 34.10 KiB | ||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Report |
1 2 | User Manual | Users Manual | 2.80 MiB |
Version 1.0 | 8/21/2014 User Manual Wireless AC750 Dual Band Router DIR-803 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Manual Revisions Revision 1.0 Date Description November 11, 2013 Initial release for Revision A1 Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. Copyright 2014 by D-Link Systems, Inc. All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Systems, Inc. i D-Link DIR-803 User Manual Table of Contents Preface ................................................................................. i Manual Revisions ........................................................................... i Trademarks ...................................................................................... i Product Overview ..............................................................1 Package Contents ......................................................................... 1 System Requirements ................................................................. 2 Introduction ................................................................................... 3 Features ............................................................................................ 4 Hardware Overview ..................................................................... 5 Connections ........................................................................... 5 LEDs ........................................................................................... 6 Installation .........................................................................7 Before you Begin ........................................................................... 7 Wireless Installation Considerations ...................................... 8 Manual Setup ................................................................................. 9 Configuration ...................................................................11 Quick Setup Wizard ....................................................................12 QRS Mobile App ..........................................................................17 Web-based Configuration Utility ..........................................22 Internet Connection Setup .............................................23 Internet Connection Setup Wizard ...............................24 Internet (Manual) ................................................................30 Static (assigned by ISP) ................................................32 PPPoE (DSL) ......................................................................33 PPTP ....................................................................................35 L2TP ....................................................................................37 DS-Lite ...............................................................................39 Wireless connection setup wizard ................................40 Wi-Fi Protected Setup Wizard .........................................43 Manual wireless network setup .....................................44 Wireless Security .................................................................53 What is WPA? ...................................................................53 Network Settings ................................................................54 Router Settings ...............................................................54 DHCP Server Settings ...................................................55 DHCP Reservation .........................................................57 IPv6 ..........................................................................................58 IPv6 Internet Connection Setup Wizard ................59 IPv6 Manual Setup.........................................................64 Advanced ...............................................................................73 Virtual Server ...................................................................73 Port Forwarding .............................................................74 Application Rules ...........................................................75 QoS Engine .......................................................................76 Network Filters ................................................................78 Access Control .................................................................79 Website Filters .................................................................82 Inbound Filters ................................................................83 Firewall Settings .............................................................84 Routing ..............................................................................86 ii D-Link DIR-803 User ManualTable of Contents Windows 7 ................................................................................ 112 WPA/WPA2 ......................................................................... 112 WPS ....................................................................................... 115 Windows Vista ......................................................................... 119 WPA/WPA2 ......................................................................... 120 WPS/WCN 2.0 .................................................................... 122 Windows XP ............................................................................. 123 WPA/WPA2 ......................................................................... 124 Troubleshooting ............................................................126 Wireless Basics ...............................................................130 What is Wireless? ...................................................................... 131 Tips ................................................................................................ 133 Wireless Modes ......................................................................... 134 Networking Basics .........................................................135 Check your IP address ............................................................ 135 Statically Assign an IP address ............................................ 136 Technical Specifications ................................................137 Advanced Wireless ........................................................87 Wi-Fi Protected Setup (WPS) .....................................88 Advanced Network Settings ......................................90 Guest Zone .......................................................................91 Tools ........................................................................................92 Admin.................................................................................92 Time ....................................................................................93 SysLog ................................................................................94 Email Settings..................................................................95 System ...............................................................................96 Firmware ...........................................................................97 Language Pack ................................................................97 Dynamic DNS ..................................................................98 System Check ..................................................................99 Schedules ...................................................................... 100 Status ................................................................................... 101 Device Info .................................................................... 101 Logs.................................................................................. 102 Statistics ......................................................................... 103 Internet Sessions ......................................................... 104 Routing ........................................................................... 105 Wireless........................................................................... 106 IPv6 .................................................................................. 107 Support ............................................................................... 108 Connect a Wireless Client to your Router ....................109 WPS Button ................................................................................ 109 Windows 8 ................................................................................ 110 WPA/WPA2 ......................................................................... 110 iii D-Link DIR-803 User ManualTable of Contents Product Overview Package Contents DIR-803 Wireless AC750 Dual Band Router Ethernet Cable Power Adapter Wi-Fi Configuration Note WI-FI Configuration Note If any of the above items are missing, please contact your reseller. Note: Using a power supply with a different voltage rating than the one included with the DIR-803 will cause damage and void the warranty for this product. 1 D-Link DIR-803 User ManualSection 1 - Product Overview System Requirements Network Requirements An Ethernet-based Cable or DSL modem IEEE 802.11ac, 802.11a, 802.11n or 802.11g wireless clients 10/100 Ethernet Computer with the following:
Windows, Macintosh, or Linux-based operating system An installed Ethernet adapter Web-based Configuration Utility Requirements Browser Requirements:
Microsoft Internet Explorer v7, Mozilla Firefox v9.0, Google Chrome 16.0, or Safari v4 or higher version Windows Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version. 2 D-Link DIR-803 User ManualSection 1 - Product Overview Introduction The D-Link DIR-803 is a IEEE 802.11ac compliant device that delivers up to 3 times faster speeds than 802.11n while staying backward compatible with 802.11a/g/b devices. Connect the DIR-803 to a Cable or DSL modem and provide high-speed Internet access to multiple computers, game consoles, and media players. Create a secure wireless network to share photos, files, music, videos, printers, and network storage. Powered by the 802.11ac technology this router provides wireless coverage for homes and offices, or for users running bandwidth-intensive applications. With some routers, all wired and wireless traffic, including VoIP, Video Streaming, Online Gaming, and Web browsing are mixed together into a single data stream. By handling data this way, applications like video streaming could pause or delay. With the D-Link Intelligent QoS Technology, wired and wireless traffic are analyzed and separated into multiple data streams. The DIR-803 supports the latest wireless security features to help prevent unauthorized access, be it from over a wireless network or the Internet. Support for WPA and WPA2 standards ensure that you will be able to use the best possible encryption regardless of your client devices. In addition, this router utilizes Dual Active Firewalls (SPI and NAT) to prevent potential attacks from across the Internet for the ideal centerpiece for your wireless network in the home or office. 3 D-Link DIR-803 User ManualSection 1 - Product Overview Features Ultimate Fast Wireless Networking - The DIR-803 provides up to 300 Mbps wireless connection in 2.4 GHz band, 433 Mbps wireless connection in 5 GHz with other 802.11ac and draft 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, and real-time audio. The performance of this 802.11ac wireless router gives you the freedom of wireless networking at speeds 3x faster than 802.11n. Compatible with 802.11a/g/n Devices - The DIR-803 is still fully compatible with the IEEE 802.11a, 802.11g and 802.11n, so it can connect with existing 802.11a, 802.11g and 802.11n PCI, USB, and Cardbus adapters. Advanced Firewall Features - The Web-based user interface displays a number of advanced network management features including:
Content Filtering - Easily applied content filtering based on MAC address, URL, and/or domain name. Filter Scheduling - These filters can be scheduled to be active on certain days or for a duration of hours or minutes. Secure Multiple/Concurrent Sessions - The DIR-803 can pass through VPN sessions. It supports multiple and concurrent IPSec and PPTP sessions, so users behind the DIR-803 can securely access corporate networks. User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DIR-803 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your companys server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11g, 802.11n and draft 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. 4 D-Link DIR-803 User ManualSection 1 - Product Overview Hardware Overview Connections 1 2 3 4 1 2 3 4 Reset Button LAN Ports (1-4) Internet Port Power Receptor Insert a paperclip in the hole and wait for 10 seconds to reset the router to default settings. Connect 10/100 Ethernet devices such as computers, switches, storage (NAS) devices and game consoles. Using an Ethernet cable, connect your broadband modem to this port. Receptor for the supplied power adapter. 5 D-Link DIR-803 User ManualSection 1 - Product Overview Hardware Overview LEDs 1 2 3 4 5 1 2 3 4 5 Power LED A solid green light indicates a proper connection to the power supply. Internet LED A solid light indicates connection on the Internet port. WPS LED Wireless LED This LED blinks during WPS handshake phase. A solid light indicates that the wireless segment is ready.. Local Network LEDs A solid light indicates a connection to an Ethernet-enabled computer on ports 1-4. 6 D-Link DIR-803 User ManualSection 1 - Product Overview This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Installation Before you Begin Please configure the router with the computer that was last connected directly to your modem. You can only use the Ethernet port on your modem. If you were using the USB connection before using the router, then you must turn off your modem, disconnect the USB cable and connect an Ethernet cable to the Internet port on the router, and then turn the modem back on. In some cases, you may need to call your ISP to change connection types (USB to Ethernet). If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. 7 D-Link DIR-803 User ManualSection 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum -
each wall or ceiling can reduce your adapters range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized. 2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception. 3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and concrete will degrade your wireless signal. 4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise. 5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. 8 D-Link DIR-803 User ManualSection 2 - Installation 1. Turn off and unplug your cable or DSL broadband modem. This is required. Manual Setup Modem 2. Position your router close to your modem and a computer. Place the router in an open area of your intended work area for better wireless coverage. 3. Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected to your computer. Plug it into the LAN port labeled 1 on the back of your router. The router is now connected to your computer. Computer DIR-803 9 D-Link DIR-803 User ManualSection 2 - Installation 4. Plug one end of the included blue Ethernet cable that came with your router into the yellow port labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on your modem. Computer Modem INTERNET DIR-803 5. Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes. 6. Connect the supplied power adapter into the power port on the back of the router and then plug it into a power outlet or surge protector. The power LED is lit. Allow 1 minute for the router to boot up. Computer Modem INTERNET DIR-803 7. If you are connecting to a Broadband service that uses a dynamic connection (not PPPoE), you may be online already. Try opening a web browser and enter a web site. If a solid light indicates connection on the Internet port and the router can connect to the Internet. 10 D-Link DIR-803 User ManualSection 2 - Installation Configuration There are several different ways you can configure your router to connect to the Internet and connect to your clients:
D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page 12. QRS Mobile App - Use your iPhone, iPad, or iPod Touch to configure your router. Refer to page 17 Manual Setup - Log into the router and manually configure your router (advanced users only). Refer to page 9. 11 D-Link DIR-803 User ManualSection 3 - Configuration Quick Setup Wizard If this is your first time installing the router, open your web browser. You will automatically be directed to the Wizard Setup Screen. If not, enter http://dlinkrouter.local. Then, press Enter. If you have already configured your settings and you would like to access the configuration utility, please refer to page 27. If this is your first time logging into the router, this wizard will start automatically. This wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password. 12 D-Link DIR-803 User ManualSection 3 - Configuration If the router does not detect a valid Ethernet connection from the Internet port, this screen will appear. Connect your broadband modem to the Internet port and then click Try Again. If the router detects an Ethernet connection but does not detect the type of Internet connection you have, this screen will appear. Click Guide me through the Internet Connection Settings to display a list of connection types to choose from. Select your Internet connection type and click Next to continue. 13 D-Link DIR-803 User ManualSection 3 - Configuration If the router detected or you selected PPPoE, enter your PPPoE username and password and click Next to continue. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If the router detected or you selected PPTP, enter your PPTP username, password, and other information supplied by your ISP. Click Next to continue. If the router detected or you selected L2TP, enter your L2TP username, password, and other information supplied by your ISP. Click Next to continue. 14 D-Link DIR-803 User ManualSection 3 - Configuration If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. For both the 2.4GHz and 5GHz segments, create a Wi-Fi network name
(SSID) using up to 32 characters. Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network. Click Next to continue. In order to secure your router, please enter a new password. Check the Enable Graphical Authentication box to enable CAPTCHA authentication for added security. Click Next to continue. 15 D-Link DIR-803 User ManualSection 3 - Configuration Select your time zone from the drop-down menu and click Next to continue. The Setup Complete window will display your Wi-Fi settings. Click Save and Connect to continue. If you want to create a bookmark to the router, click OK. Click Cancel if you do not want to create a bookmark. If you clicked Yes, a window may appear (depending on what web browser you are using) to create a bookmark. 16 D-Link DIR-803 User ManualSection 3 - Configuration QRS Mobile App QRS Mobile app allows you to install and configure your router from your mobile device. Note: The screenshots may be different depending on your mobile devices OS version. Step 1 Search for the free QRS Mobile App on the iTunes Store or Google Play. Step 2 Once your app is installed, you may now configure your router. Connect to the router wirelessly by going to your wireless utility on your device. Scan for the Wi-Fi name (SSID) as listed on the supplied info card. Select and then enter your Wi-Fi password. Step 3 Once you connect to the router, launch the QRS Mobile app from the Home screen of your device. Note: The following steps show the Android interface of the QRS Mobile app. If you are using an iPhone, iPad, or iPod touch, the appearance may be different to that of the screenshots, but the process is the same. 17 D-Link DIR-803 User ManualSection 3 - Configuration Step 4 You will see the welcome screen. Tap Start to proceed, then enter your device password and tap Log In. Tap Next once the Operation Mode screen appears. Step 5 At this point, please ensure that you the router is connected to a modem. Plug one end of the provided Ethernet cable into your DSL or cable modem, and plug the other end into the port marked INTERNET on the DIR-803. Tap Next to automatically detect your Internet connection and proceed to the next step. 18 D-Link DIR-803 User ManualSection 3 - Configuration Step 6 You will be prompted to set up each wireless frequency band in turn;
the 2.4 GHz band followed by the 5 GHz band. Firstly, enter a network name (SSID) of your choice, or leave it unchanged to accept the default SSID. Each wireless band can be assigned its own SSID. Secondly, choose a Wi-Fi password of at least 8 characters. Any device trying to connect to the router wirelessly will need to enter this password the first time it connects. Finally, tap Next to proceed. Step 7 Enter the administrator password of your choice. Unlike the Wi-Fi password, this password is only required when you need to configure the router. See Web-based Configuration Utility on page 22 for details of when this password is used. Tap Next to proceed. 19 D-Link DIR-803 User ManualSection 3 - Configuration Step 8 If you wish to receive push notifications whenever a new firmware update is available, check the Notify me when new firmware is available box and tap Next. Otherwise, just tap Next to proceed. Step 9 You will be presented with a summary of your chosen settings. Tap Save to complete the setup. 20 D-Link DIR-803 User ManualSection 3 - Configuration Congratulations, your device has been successfully configured! You can share this information by tapping Share By NFC, Share By E-mail, or tap Finish to exit the app. If you tap Share By NFC, you can now touch the tag with your other device until the confirmation message appears. Note: NFC is not supported by iPhone, iPad, and iPod touch devices. 21 D-Link DIR-803 User ManualSection 3 - Configuration Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter address of the router
(http://dlinkrouter.local./ or http://192.168.0.1). Non-Windows and Non-Mac users may also connect by typing http://192.168.0.1 in the address bar. Leave the password blank by default. 22 D-Link DIR-803 User ManualSection 3 - Configuration Internet Connection Setup Click Manual Internet Connection Setup to configure your connection manually and continue to the next page. If you want to configure your router to connect to the Internet using the wizard, click Internet Connection Setup Wizard. You will be directed to the Quick Setup Wizard. 23 D-Link DIR-803 User ManualSection 3 - Configuration Internet Connection Setup Wizard When configuring the router for the first time, we recommend that you click use the Internet Connection Setup Wizard, and follow the instructions on the screen. This wizard is designed to assist user with a quick and easy method to configure the Internet Connectivity of this router. Anytime during the Internet Connection Setup Wizard, the user can click on the Cancel button to discard any changes made and return to the main Internet page. Also the user can click on the Prev button, to return to the previous window for re-
configuration. Welcome:
This wizard will guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Step 1: Set Your Password By default, the D-Link Router does not have a password configured for administrator access to the Web-based configuration pages. To secure your new networking device, please enter and verify a password in the spaces provided. The two passwords must match. Click Next to continue. 24 D-Link DIR-803 User Manual Step 2: Select Your Time Zone Select the appropriate time zone for your location. This information is required to configure the time-based options for the router. Click Next to continue. Step 3: Internet Connection Here the user will be able to configure the Internet Connectivity used by this device. You can proceed to select any of the other manual Internet Connection methods listed below. The following parameters will be available for configuration:
Dynamic IP Address: Choose this if your Internet connection automatically provides you with an IP Ad-
dress. Most Cable Modems use this type of connection. PPPoE: Choose this option if your Internet con-
nection requires a PPPoE username and password to get online. Most DSL mo-
dems use this type of connection. PPTP: Choose this option if your Internet con-
nection requires a PPTP username and password to get online. L2TP: Choose this option if your Internet con-
nection requires an L2TP username and password to get online. Static IP Address: Choose this option if your Internet Setup Provider provided you with IP Address information that has to be manually con-
figured. 25 D-Link DIR-803 User Manual Step 3: Internet Connection (Dynamic IP Address) After selecting the Dynamic IP Address Internet connection method, the following page will appear. The following parameters will be available for configuration:
MAC Address: Enter the MAC address of the Internet gate-
way (plugged into the Internet port of this device) here. Clone Button: If the configuration PC also acts as the Internet gateway, then click on the Clone Your PCs MAC Address button to copy the PCs MAC address into the space provided. If youre not sure, leave the MAC Address field blank. Host Name: Enter the host name used here. You may also need to provide a Host Name. If you do not have or know this information, please contact your ISP. Primary DNS Address: Enter the Primary DNS IP address used here. Secondary DNS Address: Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. Click Next to continue. Step 3: Internet Connection (PPPoE) After selecting the PPPoE Internet connection method, the following page will appear:
The following parameters will be available for configuration:
User Name: Enter the PPPoE account user name used here. This information is given by the ISP. Password: Enter the PPPoE account password used here. This information is given by the ISP. Click Next to continue. 26 D-Link DIR-803 User Manual Step 3: Internet Connection (PPTP) After selecting the PPTP Internet connection method, the following page will appear:
The following parameters will be available for configuration:
Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamic or Static IP address. PPTP usual requires a Dynamic IP configuration. PPTP IP Address: Enter the PPTP IP address used here. This option is only available if Static IP is se-
lected. PPTP Subnet Mask: Enter the PPTP Subnet Mask used here. PPTP Gateway IP Address: Enter the PPTP Gateway IP address used here. PPTP Server IP Address: Enter the PPTP Server IP address used here. This is normally the same a the PPTP Gateway IP address. User Name: Enter the PPTP username used here. Password: Enter the PPTP password used here. Verify Password: Re-enter the PPTP password used here. Primary DNS Address: Enter the Primary DNS IP address used here. Secondary DNS Address: Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. Click Next to continue. 27 D-Link DIR-803 User Manual Step 3: Internet Connection (L2TP) After selecting the L2TP Internet connection method, the following page will appear:
The following parameters will be available for configuration:
Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamic or Static IP address. L2TP usual requires a Dynamic IP configuration. L2TP IP Address: Enter the L2TP IP address used here. This option is only available if Static IP is se-
lected. L2TP Subnet Mask: Enter the L2TP Subnet Mask used here. L2TP Gateway IP Address: Enter the L2TP Gateway IP address used here. here. L2TP Server IP Address: Enter the L2TP Server IP address used here. This is normally the same a the L2TP Gateway IP address. User Name: Enter the L2TP username used here. Password: Enter the L2TP password used here. Verify Password: Re-enter the L2TP password used here. Primary DNS Address: Enter the Primary DNS IP address used Secondary DNS Address: Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a func-
tional Internet connection, but using a second DNS address provides more stabil-
ity. Click Next to continue. 28 D-Link DIR-803 User Manual Step 3: Internet Connection (Static IP Address) After selecting the Static IP Address Internet connection method, the following page will appear:
The following parameters will be available for configuration:
IP Address: Enter the Static IP address provided by the ISP here. here. the ISP here. here. Subnet Mask: Enter the Subnet Mask provided by the ISP Gateway Address: Enter the Gateway IP address provided by Primary DNS Address: Enter the Primary DNS IP address used Secondary DNS Address: Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a func-
tional Internet connection, but using a second DNS address provides more stabil-
ity. Click Next to continue. Setup Complete!
This is the last page of the Internet Connection Setup Wizard. Click the Connect button to save your settings. 29 D-Link DIR-803 User Manual Internet (Manual) On this page the user can configure the Internet Connection settings manually. To access the Manual Internet Connection Setup page, click on the Manual Internet Connection Setup button. On this page there a multiple parameters that can be configured regarding the Internet Connection setup. Well discuss them from top to bottom. At any given point the user can save the configuration done, on this page, by clicking on the Save Settings button. If you choose to discard the changes made, click on the Dont Save Settings button. 30 D-Link DIR-803 User Manual Internet Connection Type In this section, the user can select from a list of Internet Connection types that can be configured and used on this router. Options to choose from are Static IP, Dynamic IP, PPPoE, PPTP, L2TP, and DS-Lite. After selecting a specific Internet Connection type, this page will automatically refresh and provide unique fields to configure related to the specified Internet Connection type. My Internet Connection is: Dynamic IP (DHCP) The default WAN configuration for this router is Dynamic IP (DHCP). This option allows the router to obtain an IP address automatically from the device that is connected to the Internet port. Note: If youre not sure about the type of Internet Connection you have, please contact your Internet Service Provider (ISP) for assistance. After selecting Dynamic IP, the following parameters will be available for configuration:
Host Name: The Host Name is optional but may be required by some ISPs. Leave blank if you are not sure. Use Unicasting: Tick this option if you ISP uses the unicast method to provide IP addresses. Primary DNS: Enter the Primary DNS IP address used Secondary DNS: Enter the Secondary DNS IP address here. used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. 1500 is the default MTU. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. MAC Address: The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PCs MAC Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. 31 D-Link DIR-803 User Manual Manual Internet Setup Static (assigned by ISP) Select Static IP Address if all the Internet ports IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format. My Internet Connection:
Select Static IP to manually enter the IP settings supplied by your ISP. IP Address:
Enter the IP address assigned by your ISP. Subnet Mask:
Enter the Subnet Mask assigned by your ISP. Default Gateway:
Enter the Gateway assigned by your ISP. DNS Servers:
The DNS server information will be supplied by your ISP (Internet Service Provider.) MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. MAC Address:
The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Copy Your PCs MAC Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. 32 D-Link DIR-803 User ManualSection 3 - Configuration Internet Setup PPPoE (DSL) Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. My Internet Connection: Select PPPoE (Username/Password) from the drop-down menu. Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamic or Static IP address. PPPoE usually requires a Dynamic IP configuration. IP Address: Enter the PPPoE IP address used here. This option is only avail-
able if Static IP is selected. Username: Enter the PPPoE account user name used here. This information is Password: Enter the PPPoE account password used here. This information is given by the ISP. given by the ISP. Verify Password: Re-enter the PPPoE account password used here. Service Name: This optional field enables the user to enter a service name to identify this Internet connection here. Reconnect Mode: Use the radio buttons to specify the reconnect mode. The user can specify a custom schedule or specify the On Demand, or Manual option. To specify a custom schedule, use the drop-
down menu to select one of the schedules that has been defined in the Schedules page. To create a new schedule, click the New Schedule button to open the Schedules page. Schedules will be discussed later. 33 D-Link DIR-803 User ManualSection 3 - Configuration Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. DNS Mode: This option allow the router to obtain the DNS IP addresses from the ISP, when Receive DNS from ISP is selected, or allows the user to enter DNS IP address manually, when Enter DNS Manually is selected. Primary DNS Server: Enter the Primary DNS IP address used here. Secondary DNS Server: Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. MAC Address: The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PCs MAC Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. 34 D-Link DIR-803 User ManualSection 3 - Configuration Internet Setup PPTP Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. My Internet Connection: Select PPTP (Username/Password) from the Address Mode: Here the user can specify whether this Internet drop-down menu. connection requires the use of a Dynamic or Static IP address. PPTP usually requires a Dynamic IP configuration. PPTP IP Address: Enter the PPTP IP address used here. This option is only available if Static IP is selected. PPTP Subnet Mask: Enter the PPTP Subnet Mask used here. PPTP Gateway IP Address: Enter the PPTP Gateway IP address used here. PPTP Server IP Address: Enter the PPTP Server IP address used here. This is normally the same a the PPTP Gateway IP address. Username: Enter the PPTP username used here. Password: Enter the PPTP password used here. Verify Password: Re-enter the PPTP password used here. Reconnect Mode: Use the radio buttons to specify the reconnect mode. The user can specify a custom schedule or specify the On Demand, or Manual option. To specify a custom schedule, use the drop-down menu to select one of the schedules that has been defined in the Schedules page. To create a new schedule, click the New Schedule button to open the Schedules page. Schedules will be discussed later. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. 35 D-Link DIR-803 User ManualSection 3 - Configuration Primary DNS Server: Enter the Primary DNS IP address used here. Secondary DNS Server: Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. MAC Address: The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PCs MAC Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. 36 D-Link DIR-803 User ManualSection 3 - Configuration Internet Setup L2TP Choose L2TP (Layer 2 Tunneling Protocol) if your ISP uses a L2TP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. My Internet Connection:
Select L2TP (Username/Password) from the drop-
down menu. Address Mode: Here the user can specify whether this Internet connection requires the use of a Dynamic or Static IP address. L2TP usual requires a Dynamic IP con-
figuration. L2TP IP Address: Enter the L2TP IP address used here. This option is L2TP Subnet Mask: Enter the L2TP Subnet Mask used here. only available if Static IP is selected. Enter the L2TP Gateway IP address used here. L2TP Gateway IP Address:
L2TP Server IP Address:
Enter the L2TP Server IP address used here. This is normally the same a the L2TP Gateway IP address. Username: Enter the L2TP username used here. Password: Enter the L2TP password used here. Verify Password: Re-enter the L2TP password used here. Reconnect Mode: Use the radio buttons to specify the reconnect mode. The user can specify a custom schedule or specify the On Demand, or Manual option. To specify a custom schedule, use the drop-down menu to select one of the schedules that has been defined in the Schedules page. To create a new schedule, click the New Schedule button to open the Schedules page. Schedules will be discussed later. 37 D-Link DIR-803 User ManualSection 3 - Configuration Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this Primary DNS Server: Enter the Primary DNS IP address used here. feature, enable Auto-reconnect. Secondary DNS Server: Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional Internet connection, but using a second DNS address provides more stability. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default MTU. MAC Address: The default MAC Address is set to the Internet ports physical interface MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PCs MAC Address button to replace the Internet ports MAC address with the MAC address of your Ethernet card. 38 D-Link DIR-803 User ManualSection 3 - Configuration Internet Setup DS-Lite Another Internet Connection type is DS-Lite. DS-Lite is an IPv6 connection type. After selecting DS-Lite, the following parameters will be available for configuration:
DS-Lite Configuration: Select the DS-Lite DHCPv6 Option to let the router allocate the AFTR IPv6 address automatically. Select the Manual Configu-
ration to enter the AFTR IPv6 address in manually. AFTR IPv6 Address: After selecting the Manual Configuration option above, the user can enter the AFTR IPv6 address used here. B4 IPv4 Address: Enter the B4 IPv4 address value used here. WAN IPv6 Address: Once connected, the WAN IPv6 address IPv6 WAN Default Gateway Once connected, the IPv6 WAN Default Gateway address will be displayed here. will be displayed here. Click on the Save Settings button to accept the changes made. Click on the Dont Save Settings button to discard the changes made. 39 D-Link DIR-803 User ManualSection 3 - Configuration Wireless connection setup wizard On this page the user can configure the Wireless settings for this device. There are 3 ways to configure Wireless using this router. Firstly, the user can choose to make use for the quick and easy Wireless Connection Setup Wizard. Secondly, the user can choose to make use Wi-Fi Protected Setup. Lastly, the user can configure the Wireless settings manually. Wireless Settings: Wireless Connection Setup Wizard The Wireless Connection Setup Wizard is specially designed to assist basic network users with a simple, step-by-step set of instructions to configure the wireless settings of this router. It is highly recommended to customized the wireless network settings to fit into your environment and to add higher security. To initiate the Wireless Connection Setup Wizard click on the Wireless Connection Setup Wizard button. Step 1: In this step, the user must enter a custom Wireless Network Name or SSID. Enter the new Network Name (SSID) in the appropriate space provided. There are seperate spaces provided for a 2.4GHz Network Name and a 5GHz Network Name. Secondly the user can choose between two wireless security wizard configurations. The user can select Automatically assign a network key, by which the router will automatically generate a WPA/WPA2 pre-
shared key using the TKIP and AES encryption methods; or the user can select Manually assign a network key, by which the user will be prompt to manually enter a WPA/WPA2 pre-shared key using the TKIP and AES encryption methods. Click on the Prev button to return to the previous page. Click on the Next button to continue to the next page. Click on the Cancel button to discard the changes made and return to the main wireless page. 40 D-Link DIR-803 User Manual Step 2: This step will only be available if the user selected Manually assign a network key in the previous step. Here the user can manually enter the WPA/WPA2 pre-shared key in the Wireless Security Password space provided. The key entered must be between 8 and 63 characters long. Remember, this key will be used when wireless clients wants to connect to this device. So please remember this key to prevent future troubleshooting. If you want to use the same Wireless Security Password for both 2.4GHz and 5GHz bands, tick the option provided. If not selected, you need to input two seperate Wireless Security Passwords for each individual Wireless band. Click on the Prev button to return to the previous page. Click on the Next button to continue to the next page. Click on the Cancel button to discard the changes made and return to the main wireless page. Setup Complete: On this page the user can view the configuration made and verify whether they are correct. Click on the Prev button to return to the previous page. Click on the Cancel button to discard the changes made and return to the main wireless page. Click on the Save button to accept the changes made. 41 D-Link DIR-803 User Manual After click the Save button the device will save the settings made and return to the main wireless page. End of Wizard. 42 D-Link DIR-803 User Manual Wi-Fi Protected Setup Wizard Wireless Settings: Wi-Fi Protected Setup Wizard If your Wireless Clients support the WPS connection method, this Wi-Fi Protected Setup Wizard can be used to initiate a wireless connection between this device and Wireless clients with a simple click of the WPS button. The Wi-Fi Protected Setup Wizard is specially designed to assist basic network users with a simple, step-by-step set of instructions to connect wireless clients to this router using the WPS method. To initiate the Wi-Fi Protected Setup Wizard click on the Add Wireless Device with WPS button. Step 1: In this step the user have two options to choose from. You can choose Auto if the wireless client supports WPS, or Manual if the wire-
less client does not support WPS. Click on the Prev button to return to the previous page. Click on the Next button to continue to the next page. Click on the Cancel button to discard the changes made and return to the main wireless page. Step 2: After selecting Auto, the following page will appear. There are two ways to add a wireless device, that supports WPS. Firstly, there is the Personal Identification Number (PIN) method. Using this method will prompt the user to enter a PIN code. This PIN code should be identical on the wireless client. Secondly, there is the Push Button Configuration
(PBC) method. Using this method will allow the wireless client to con-
nect to this device by similarly pressing the PBC button on it. Click on the Prev button to return to the previous page. Click on the Next button to continue to the next page. Click on the Cancel button to discard the changes made and return to the main wireless page. 43 D-Link DIR-803 User Manual Step 2: After selecting Manual, the following page will appear. On this page to user can view the wireless configuration of this router. The wire-
less clients should configure their wireless settings to be identical to the settings displayed on this page for a successful connection. This option is for wireless clients that cant use the WPS method to connect to this device. Click on the Prev button to return to the previous page. Click on the Next button to continue to the next page. Click on the Cancel button to discard the changes made and return to the main wireless page. Click on the Wireless Status button to navigate to the Status > Wireless page to view what wireless client are connected to this device. End of Wizard. Manual wireless network setup Wireless Settings: Manual Wireless Network Setup The manual wireless network setup option allows users to configure the wireless settings of this device manually. This option is for the more advanced user and includes all parameters that can be configured for wireless connectivity. To initiate the Manual Wireless Setup page, click on the Manual Wire-
less Connection Setup button. On this page the user can configure all the parameters related to the wireless connectivity of this router. 44 D-Link DIR-803 User Manual The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being config-
ured. In this option we find that the fol-
lowing parameters will be regarding the 2.4GHz band. Enable Wireless: Check the box to enable the wireless func-
tion. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Select the time frame that you would like your wireless network enabled. The schedule may be set to Always. Any schedule you create will be available in the drop-down menu. Click New Schedule to create a new schedule. Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The 802.11 Mode: Here the user can manually select the preferred frequency band to use for this wireless network. Enable Auto Channel Scan: The auto channel selection setting can be selected to allow this device to choose the channel with the least SSID is case-sensitive. Enable Auto Channel amount of interference. Wireless Channel: By default the channel is set to 1. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Selection, this option will be greyed out. Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Automatic) for best performance. Channel Width: When using the 802.11n frequency band, the user have an option to choose between a 20MHz or 20/40MHz band-
width. Visibility Status: The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless network name is broadcasted to anyone within the range of your signal. If you are not using encryption then they could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to connect to the network. 45 D-Link DIR-803 User Manual By default the wireless security of this router will be disabled. In this next option the user can enabled or disable wireless security for the frequency band 2.4GHz. There are two types of encryption that can be used. WEP or WPA/WPA2. Wireless Security Mode: WEP Wired Equivalent Privacy (WEP) is the most basic form of encryption that can be used for wireless networks. Even though it is known as a weak security method, it is better than no security at all. Older wireless adapter sometimes only supports WEP encryption and thus we still find this encryption method used today. The following parameters will be available for configuration:
WEP Key Length: Here the user can specify to either use a 64Bit or a 128Bit encrypted key. Authentication: Authentication is a process by which the router verifies the identity of a network device that is attempting to join the wire-
less network. There are two types authen-
tication for this device when using WEP. Open System allows all wireless devices to communicate with the router before they are required to provide the encryp-
tion key needed to gain access to the network. Shared Key requires any wire-
less device attempting to communicate with the router to provide the encryption key needed to access the network before they are allowed to communicate with the router. WEP Key 1: Enter the WEP key used here. For 64-bit keys you must enter 10 hex digits into each key box. For 128-bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64-bit keys, and a maximum of 13 characters for 128-bit keys. 46 D-Link DIR-803 User Manual Wireless Security Mode: WPA-Personal Wi-Fi Protected Access (WPA) is the most advanced and up to date wire-
less encryption method used today. This is the recommended wireless security option. WPA supports two authentication frameworks. Personal
(PSK) and Enterprise (EAP). Personal requires only the use of a pass-
phrase (Shared Secret) for security. The following parameters will be available for configuration:
WPA Mode: WPA is the older standard; select this op-
tion if the clients that will be used with the router only support the older standard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. With the WPA2 option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the WPA2 Only option, the router associates only with clients that also support WPA2 secu-
rity. here. Options to choose from are Temporal Key Integrity Protocol (TKIP), Advanced Encryption Standard (AES), and Both (TKIP and AES). Cipher Type: Select the appropriate cipher type to use Group Key Update Interval: Enter the amount of time before the group key used for broadcast and multicast data is changed. Pre-Shared Key: Enter the shared secret used here. This secret phrase needs to be the same on all of the wireless clients for them to be able to connect to the wireless network suc-
cessfully. 47 D-Link DIR-803 User Manual Wireless Security Mode: WPA-Personal Wi-Fi Protected Access (WPA) is the most advanced and up to date wireless encryption method used today. This is the recommended wireless security option. WPA supports two authentication frameworks. Personal (PSK) and Enterprise (EAP). Personal requires only the use of a pass-phrase (Shared Secret) for security. The following parameters will be available for configuration:
WPA Mode: WPA is the older standard; select this option if the clients that will be used with the router only support the lder standard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. With the WPA2 option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the WPA2 Only option, the router associates only with clients that also support WPA2 security. here. Options to choose from are Temporal Key Integrity Protocol (TKIP), Advanced Encryption Standard (AES), and Both (TKIP and AES). Cipher Type: Select the appropriate cipher type to use Group Key Update Interval: Enter the amount of time before the group key used for broadcast and multicast data is changed. RADIUS Server IP Address: When the user chooses to use the EAP authentication framework, the RADIUS servers IP address can be entered here. RADIUS Server Port: When the user chooses to use the EAP authentication framework, the RADIUS servers port number can be entered RADIUS Server Shared Secret:
here. Enter the shared secret used here. This secret phrase needs to be the same on all of the wireless clients for them to be able to connect to the wireless network successfully. 48 D-Link DIR-803 User Manual The following parameters will be available for configuration:
Wireless Band: Displays the wireless band being config-
ured. In this option we find that the fol-
lowing parameters will be regarding the 5GHz band. Enable Wireless: Check the box to enable the wireless func-
tion. If you do not want to use wireless, uncheck the box to disable all the wireless functions. Select the time frame that you would like your wireless network enabled. The schedule may be set to Always. Any schedule you create will be available in the drop-down menu. Click New Schedule to create a new schedule. SSID is case-sensitive. Enable Auto Channel Wireless Network Name: The Service Set Identifier (SSID) is the name of your wireless network. Create a name using up to 32 characters. The 802.11 Mode: Here the user can manually select the preferred frequency band to use for this wireless network. Enable Auto Channel Scan: The auto channel selection setting can be selected to allow this device to choose the channel with the least amount of interference. Wireless Channel: By default the channel is set to 36. The Channel can be changed to fit the channel setting for an existing wireless network or to customize the wireless network. If you enable Auto Channel Selection, this option will be greyed out. Transmission Rate: Select the transmit rate. It is strongly suggested to select Best (Automatic) for best performance. Channel Width: When using the 802.11n frequency band, the user have an option to choose between a 20 MHz, 20/40 MHz, or 20/40/80 MHz bandwidth. Visibility Status: The Invisible option allows you to hide your wireless network. When this option is set to Visible, your wireless network name is broadcasted to anyone within the range of your signal. If you are not using encryption then they could connect to your network. When Invisible mode is enabled, you must enter the Wireless Network Name (SSID) on the client manually to connect to the network. 49 D-Link DIR-803 User Manual By default the wireless security of this router will be disabled. In this next option the user can enabled or disable wireless security for the frequency band 2.4GHz. There are two types of encryption that can be used. WEP or WPA/WPA2. Wireless Security Mode: WEP Wired Equivalent Privacy (WEP) is the most basic form of encryption that can be used for wireless networks. Even though it is known as a weak security method, it is better than no security at all. Older wireless adapter sometimes only supports WEP encryption and thus we still find this encryption method used today. The following parameters will be available for configuration:
WEP Key Length: Here the user can specify to either use a 64Bit or a 128Bit encrypted key. Authentication: Authentication is a process by which the router verifies the identity of a network device that is attempting to join the wire-
less network. There are two types authen-
tication for this device when using WEP. Open System allows all wireless devices to communicate with the router before they are required to provide the encryp-
tion key needed to gain access to the network. Shared Key requires any wire-
less device attempting to communicate with the router to provide the encryption key needed to access the network before they are allowed to communicate with the router. WEP Key 1: Enter the WEP key used here. For 64-bit keys you must enter 10 hex digits into each key box. For 128-bit keys you must enter 26 hex digits into each key box. A hex digit is either a number from 0 to 9 or a letter from A to F. You may also enter any text string into a WEP key box, in which case it will be converted into a hexadecimal key using the ASCII values of the characters. A maximum of 5 text characters can be entered for 64-bit keys, and a maximum of 13 characters for 128-bit keys. 50 D-Link DIR-803 User Manual Wireless Security Mode: WPA-Personal Wi-Fi Protected Access (WPA) is the most advanced and up to date wire-
less encryption method used today. This is the recommended wireless security option. WPA supports two authentication frameworks. Personal
(PSK) and Enterprise (EAP). The following parameters will be available for configuration:
WPA Mode: WPA is the older standard; select this op-
tion if the clients that will be used with the router only support the older standard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. With the WPA2 option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the WPA2 Only option, the router associates only with clients that also support WPA2 secu-
rity. here. Options to choose from are Temporal Key Integrity Protocol (TKIP), Advanced Encryption Standard (AES), and Both (TKIP and AES). Cipher Type: Select the appropriate cipher type to use Group Key Update Interval: Enter the amount of time before the group key used for broadcast and multicast data is changed. Pre-Shared Key: Enter the shared secret used here. This secret phrase needs to be the same on all of the wireless clients for them to be able to connect to the wireless network successfully. 51 D-Link DIR-803 User Manual Wireless Security Mode: WPA-Enterprise Wi-Fi Protected Access (WPA) is the most advanced and up to date wire-
less encryption method used today. This is the recommended wireless security option. WPA supports two authentication frameworks. Personal
(PSK) and Enterprise (EAP). The following parameters will be available for configuration:
WPA Mode: WPA is the older standard; select this op-
tion if the clients that will be used with the router only support the older standard. WPA2 is the newer implementation of the stronger IEEE 802.11i security standard. With the WPA2 option, the router tries WPA2 first, but falls back to WPA if the client only supports WPA. With the WPA2 Only option, the router associates only with clients that also support WPA2 secu-
rity. here. Options to choose from are Temporal Key Integrity Protocol (TKIP), Advanced Encryption Standard (AES), and Both (TKIP and AES). Cipher Type: Select the appropriate cipher type to use Group Key Update Interval: Enter the amount of time before the group key used for broadcast and multicast data is changed. RADIUS Server IP Address: When the user chooses to use the EAP authentication framework, the RADIUS servers IP address can be entered here. RADIUS Server Port: When the user chooses to use the EAP authentication framework, the RADIUS servers port number can be entered RADIUS Server Shared Secret:
here. Enter the shared secret used here. This secret phrase needs to be the same on all of the wireless clients for them to be able to connect to the wireless network successfully. 52 D-Link DIR-803 User Manual Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-803 offers the following types of security:
WPA2 (Wi-Fi Protected Access 2) WPA (Wi-Fi Protected Access) WPA2-PSK (Pre-Shared Key) WPA-PSK (Pre-Shared Key) What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy). The 2 major improvements over WEP:
Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys havent been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP. User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP regulates access to a wireless network based on a computers hardware-specific MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network. WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. 53 D-Link DIR-803 User ManualSection 4 - Security This section will allow you to change the local network settings of the router and to configure the DHCP settings. Network Settings Router Settings Router IP Address:
Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once you click Save Settings, you will need to enter the new IP address in your browser to get back into the configuration utility. Subnet Mask:
Enter the Subnet Mask. The default subnet mask is 255.255.255.0. Device Name:
Enter a name for the router. Local Domain:
Enter the Domain name (Optional). Enable DNS Relay:
Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. 54 D-Link DIR-803 User ManualSection 3 - Configuration DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The DIR-803 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to Obtain an IP Address Automatically. When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DIR-803. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool. Enable DHCP Server:
Check this box to enable the DHCP server on your router. Uncheck to disable this function. DHCP IP Address Range:
Enter the starting and ending IP addresses for the DHCP servers IP assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. DHCP Lease Time:
The length of time for the IP address lease. Enter the Lease time in minutes. Always Broadcast:
If all the computers on the LAN successfully obtain their IP addresses from the routers DHCP server as expected, this option can remain disabled. However, if one of the computers on the LAN fails to obtain an IP address from the routers DHCP server, it may have an old DHCP client that incorrectly turns off the broadcast flag of DHCP packets. Enabling this option will cause the router to always broadcast its responses to all clients, thereby working around the problem, at the cost of increased broadcast traffic on the LAN. NetBIOS Announcement:
Check this box to allow the DHCP Server to offer NetBIOS configuration settings to the LAN hosts. NetBIOS allow LAN hosts to discover all other computers within the network, e.g. within Network Neighborhood. Learn NetBIOS from WAN:
If NetBIOS announcement is switched on, it will cause WINS information to be learned from the WAN side, if available. Turn this setting off to configure manually. 55 D-Link DIR-803 User ManualSection 3 - Configuration NetBIOS Scope:
This is an advanced setting and is normally left blank. This allows the configuration of a NetBIOS domain name under which network hosts operate. This setting has no effect if the Learn NetBIOS information from WAN is activated. NetBIOS Node:
This field indicates how network hosts are to perform NetBIOS name registration and discovery. H-Node, this indicates a Hybrid-State of operation. First WINS servers are tried, if any, followed by local network broadcast. This is generally the preferred mode if you have configured WINS servers. M-Node (default), this indicates a Mixed-Mode of operation. First Broadcast operation is performed to register hosts and discover other hosts, if broadcast operation fails, WINS servers are tried, if any. This mode favours broadcast operation which may be preferred if WINS servers are reachable by a slow network link and the majority of network services such as servers and printers are local to the LAN. P-Node, this indicates to use WINS servers ONLY. This setting is useful to force all NetBIOS operation to the configured WINS servers. You must have configured at least the primary WINS server IP to point to a working WINS server. B-Node, this indicates to use local network broadcast ONLY. This setting is useful where there are no WINS servers available, however, it is preferred you try M-Node operation first. This setting has no effect if the Learn NetBIOS information from WAN is activated. WINS IP Address:
Enter your WINS Server IP address(es). 56 D-Link DIR-803 User ManualSection 3 - Configuration If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. DHCP Reservation Note: This IP address must be within the DHCP IP Address Range. Enable:
Check this box to enable the reservation. Computer Name:
Enter the computer name or select from the drop-down menu and click <<. IP Address:
Enter the IP address you want to assign to the computer or device. This IP Address must be within the DHCP IP Address Range. MAC Address:
Enter the MAC address of the computer or device. Copy Your PCs MAC Address:
If you want to assign an IP address to the computer you are currently on, click this button to populate the fields. Save:
Click Save to save your entry. You must click Save Settings at the top to activate your reservations. DHCP Reservations List DHCP Reservations List:
Displays any reservation entries. Displays the host name
(name of your computer or device), MAC Address, and IP address. Enable:
Check to enable the reservation. Edit:
Click the edit icon to make changes to the reservation entry. Delete:
Click to remove the reservation from the list. 57 D-Link DIR-803 User ManualSection 3 - Configuration On this page, the user can configure the IPv6 Connection type. There are two ways to set up the IPv6 Internet connection. You can use the Web-based IPv6 Internet Connection Setup Wizard, or you can manually configure the connection. IPv6 For the beginner user that has not configured a router before, click on the IPv6 Internet Connection Setup Wizard button and the router will guide you through a few simple steps to get your network up and running. DIR-803 For the advanced user that has configured a router before, click on the Manual IPv6 Internet Connection Setup button to input all the settings manually. To configure the IPv6 local settings, click on the IPv6 Local Connectivity Setup button. 58 D-Link DIR-803 User ManualSection 3 - Configuration IPv6 Internet Connection Setup Wizard On this page, the user can configure the IPv6 Connection type using the IPv6 Internet Connection Setup Wizard. Click the IPv6 Internet Connection Setup Wizard button and the router will guide you through a few simple steps to get your network up and running. Click Next to continue to the next page. Click Cancel to discard the changes made and return to the main page. The router will try to detect whether its possible to obtain the IPv6 Internet connection type automatically. If this succeeds then the user will be guided through the input of the appropriate parameters for the connection type found. 59 D-Link DIR-803 User ManualSection 3 - Configuration However, if the automatic detection fails, the user will be prompt to either Try again or to click on the Guide me through the IPv6 settings button to initiate the manual continual of the wizard. There are several connection types to choose from. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. The 3 options available on this page are IPv6 over PPPoE, Static IPv6 address and Route, and Tunneling Connection. Choose the required IPv6 Internet Connection type and click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. Click on the Next button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. 60 D-Link DIR-803 User ManualSection 3 - Configuration IPv6 over PPPoE After selecting the IPv6 over PPPoE option, the user will be able to configure the IPv6 Internet connection that requires a username and password to get online. Most DSL modems use this type of connection. The following parameters will be available for configuration:
PPPoE Session: Select the PPPoE Session value used here. This option will state that this connection shares its information with the already configured IPv6 PPPoE connection, or the user can create a new PPPoE connection here. User Name: Enter the PPPoE username used here. If you do not know your user name, please contact your ISP. Password: Enter the PPPoE password used here. If you do not know your password, please contact your ISP. Verify Password: Re-enter the PPPoE password used here. Service Name: Enter the service name for this connection here. This option is optional. 61 D-Link DIR-803 User ManualSection 3 - Configuration Static IPv6 Address Connection This mode is used when your ISP provides you with a set IPv6 addresses that does not change. The IPv6 information is manually entered in your IPv6 configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS Server. Your ISP provides you with all this information. Use Link-Local Address:
The Link-local address is used by nodes and routers when communicating with neighboring nodes on the same link. This mode enables IPv6-capable devices to communicate with each other on the LAN side. IPv6 Address:
Enter the WAN IPv6 address for the router here. Subnet Prefix Length:
Enter the WAN subnet prefix length value used here. Default Gateway:
Enter the WAN default gateway IPv6 address used here. Primary IPv6 DNS Address:
Secondary IPv6 DNS Address:
LAN IPv6 Address:
Enter the WAN primary DNS Server address used here. Enter the WAN secondary DNS Server address used here. These are the settings of the LAN (Local Area Network) IPv6 interface for the router. The routers LAN IPv6 Address configuration is based on the IPv6 Address and Subnet assigned by your ISP. (A subnet with prefix /64 is supported in LAN.) 62 D-Link DIR-803 User ManualSection 3 - Configuration Tunneling Connection (6rd) After selecting the Tunneling Connection (6rd) option, the user can configure the IPv6 6rd connection settings. The following parameters will be available for configuration:
6rd IPv6 Prefix: Enter the 6rd IPv6 address and prefix value used here. IPv4 Address: Enter the IPv4 address used here. Mask Length: Enter the IPv4 mask length used here. Assigned IPv6 Prefix: Displays the IPv6 assigned prefix value here. 6rd Border Relay IPv4 Address:
Enter the 6rd border relay IPv4 address used here. IPv6 DNS Server: Enter the primary DNS Server address used here. The IPv6 Internet Connection Setup Wizard is complete. Click on the Connect button to continue. Click on the Prev button to return to the previous page. Click on the Cancel button to discard all the changes made and return to the main page. 63 D-Link DIR-803 User ManualSection 3 - Configuration IPv6 Manual Setup There are several connection types to choose from: Auto Detection, Static IPv6, Autoconfiguration (SLAAC/DHCPv6), PPPoE, IPv6 in IPv4 Tunnel, 6to4, 6rd, and Link-local. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider. Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled. Select Auto Detection to have the router detect and automatically configure your IPv6 setting from your ISP. Auto Detection 64 D-Link DIR-803 User ManualSection 3 - Configuration Static IPv6 My IPv6 Connection:
Select Static IPv6 from the drop-down menu. WAN IPv6 Address Settings:
Enter the address settings supplied by your Internet provider
(ISP). LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:
Check to enable the Autoconfiguration feature. Autoconfiguration Type:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC +
Stateless DHCPv6. IPv6 Address Range Start:
Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End:
Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime:
Enter the IPv6 Address Lifetime (in minutes). 65 D-Link DIR-803 User ManualSection 3 - Configuration Autoconfiguration My IPv6 Connection:
Select Autoconfiguration (Stateless/DHCPv6) from the drop-down menu. IPv6 DNS Settings:
Select either Obtain DNS server address automatically or Use the following DNS Address. Primary/Secondary DNS Address:
Enter the primary and secondary DNS server addresses. LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:
Check to enable the Autoconfiguration feature. Autoconfiguration Type:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC +
Stateless DHCPv6. IPv6 Address Range Start:
Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End:
Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime:
Enter the IPv6 Address Lifetime (in minutes). 66 D-Link DIR-803 User ManualSection 3 - Configuration PPPoE My IPv6 Connection:
Select PPPoE from the drop-down menu. PPPoE:
Enter the PPPoE account settings supplied by your Internet provider (ISP). Address Mode:
Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic. IP Address:
Enter the IP address (Static PPPoE only). User Name:
Enter your PPPoE user name. Password:
Enter your PPPoE password and then retype the password in the next box. Service Name:
Enter the ISP Service Name (optional). Reconnection Mode:
Select either Always-on, On-Demand, or Manual. Maximum Idle Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. MTU:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1492 is the default MTU. IPv6 DNS Settings:
Select either Obtain DNS server address automatically or Use the following DNS Address. Primary/Secondary DNS Address:
Enter the primary and secondary DNS server addresses. LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:
Check to enable the Autoconfiguration feature. 67 D-Link DIR-803 User ManualSection 3 - Configuration Autoconfiguration Type:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. IPv6 Address Range Start:
Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End:
Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime:
Enter the IPv6 Address Lifetime (in minutes). 68 D-Link DIR-803 User ManualSection 3 - Configuration IPv6 in IPv4 Tunneling My IPv6 Connection:
IPv6 in IPv4 Tunnel Settings:
Select IPv6 in IPv4 Tunnel from the drop-down menu. Enter the settings supplied by your Internet provider (ISP). LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Enable Autoconfiguration:
Displays the Routers LAN Link-Local Address. Check to enable the Autoconfiguration feature. Autoconfiguration Type:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. IPv6 Address Range Start:
Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End:
Enter the end IPv6 Address for the DHCPv6 range for your local computers. Pv6 Address Lifetime:
Enter the Router Advertisement Lifetime (in minutes). 69 D-Link DIR-803 User ManualSection 3 - Configuration 6 to 4 Tunneling My IPv6 Connection:
Select 6 to 4 from the drop-down menu. 6 to 4 Settings:
Enter the IPv6 settings supplied by your Internet provider (ISP). Primary/Secondary DNS Address:
Enter the primary and secondary DNS server addresses. LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Enable Autoconfiguration:
Displays the Routers LAN Link-Local Address. Check to enable the Autoconfiguration feature. Autoconfiguration Type:
Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless DHCPv6. IPv6 Address Range Start:
Enter the start IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Range End:
Enter the end IPv6 Address for the DHCPv6 range for your local computers. IPv6 Address Lifetime:
Enter the IPv6 Address Lifetime (in minutes). 70 D-Link DIR-803 User ManualSection 3 - Configuration 6rd My IPv6 Connection:
Select 6rd from the drop-down menu. 6RD Settings:
Enter the address settings supplied by your Internet provider
(ISP). LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the router. LAN Link-Local Address:
Displays the Routers LAN Link-Local Address. Enable Autoconfiguration:
Check to enable the Autoconfiguration feature. Autoconfiguration Type:
Select Stateful (DHCPv6), SLAAC+RDNSS or SLAAC + Stateless DHCPv6. Router Advertisement Lifetime:
Enter the Router Advertisement Lifetime (in minutes). 71 D-Link DIR-803 User ManualSection 3 - Configuration Link-Local Connectivity My IPv6 Connection:
Select Link-Local Only from the drop-down menu. LAN IPv6 Address Settings:
Displays the IPv6 address of the router. 72 D-Link DIR-803 User ManualSection 3 - Configuration This will allow you to open a single port. If you would like to open a range of ports, refer to the next page. Advanced Virtual Server Name:
Enter a name for the rule or select an application from the drop-down menu. Select an application and click
<< to populate the fields. IP Address:
Private Port/
Public Port:
Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name drop-down menu. Select your computer and click <<. Enter the port that you want to open next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the Internet side, and the private port is the port being used by the application on the computer within your local network. Protocol Type:
Select TCP, UDP, or Both from the drop-down menu. Schedule:
The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools
> Schedules section. Inbound Filter:
Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. 73 D-Link DIR-803 User ManualSection 3 - Configuration Port Forwarding This will allow you to open a single port or a range of ports. Name:
Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields. IP Address:
Enter the IP address of the computer on your local network that you want to allow the incoming service to. If your computer is receiving an IP address automatically from the router (DHCP), you computer will be listed in the Computer Name drop-down menu. Select your computer and click <<. TCP/UDP:
Enter the TCP and/or UDP port or ports that you want to open. You can enter a single port or a range of ports. Separate ports with a common. Example: 24,1009,3000-4000 Schedule:
The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools
> Schedules section. Inbound Filter:
Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. 74 D-Link DIR-803 User ManualSection 3 - Configuration Application Rules Some applications require multiple connections, such as Internet gaming, video conferencing, Internet telephony and others. These applications have difficulties working through NAT (Network Address Translation). Special Applications makes some of these applications work with the DIR-803. If you need to run applications that require multiple connections, specify the port normally associated with an application in the Trigger Port field, select the protocol type as TCP or UDP, then enter the firewall
(public) ports associated with the trigger port to open them for inbound traffic. The DIR-803 provides some predefined applications in the table on the bottom of the web page. Select the application you want to use and enable it. Name:
Enter a name for the rule. You may select a pre-defined application from the drop-down menu and click <<. Trigger:
This is the port used to trigger the application. It can be either a single port or a range of ports. Traffic Type:
Select the protocol of the trigger port (TCP, UDP, or Both). Firewall:
This is the port number on the Internet side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges. Traffic Type:
Select the protocol of the firewall port (TCP, UDP, or Both). Schedule:
The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. 75 D-Link DIR-803 User ManualSection 3 - Configuration QoS Engine The QoS Engine option helps improve your network gaming performance by prioritizing applications. By default the QoS Engine settings are disabled and application priority is not classified automatically. The QoS section contains a queuing mechanism, traffic shaping and classification. It supports two kinds of queuing mechanisms. Strict Priority Queue (SPQ) and Weighted Fair Queue (WFQ). SPQ will process traffic based on traffic priority. Queue1 has the highest priority and Queue4 has the lowest priority. WFQ will process traffic based on the queue weight. Users can configure each queues weight. The sum of all the queues weight must be 100. When surfing the Internet, the system will do traffic shaping based on the uplink and downlink speed. The classification rules can be used to classify traffic to different queues, then SPQ or WFQ will do QoS based on the queues priority or weight. The following parameters will be available for configuration:
Enable QoS: This option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP. Uplink Speed: The speed at which data can be transferred from the router to your ISP. This is determined by your ISP. ISPs often define speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink speed with a service such as www.dslreports.com. Downlink Speed: The speed at which data can be transferred from the ISP to the router. This is determined by your ISP. ISPs often define speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 1500. Alternatively you can test your downlink speed with a service such as www.dslreports.com. Queue Type: Here the user can specify the queue type used. When choosing the option Strict Priority Queue, the router will apply QoS based on the internal specification for the queue IDs listed. When choosing the option Weight Fair Queue, the router will apply QoS based on the user defined percentage in the Queue Weight column. Queue ID: In this column the Queue ID used will be displayed. 76 D-Link DIR-803 User ManualSection 3 - Configuration Queue Priority: In this column the Queue Priority used will be displayed. Queue Weight: After choosing to use the Weight Fair Queue option, under Queue Type, the user will be able to manual enter the Queue Weight for each individual Queue ID. After specifying the QoS framework used, in the QoS setup section, the user can now create individual rules for scenarios that require the use of traffic control and data priority manipulation. The following parameters will be available for configuration:
Checkbox: Tick this option to enable the rule specified. Name: Enter a custom name for the rule being created here. This name is used for identification. Queue ID: Select the appropriate priority requirement from the drop-down menu that will be applied to this rule. Op-
tion to choose from are Highest, Higher, Normal, and Best Effort. Protocol: Select the protocol used for the application for in the drop-down menu and it will automatically place it in the Protocol field. Local IP Range: Enter the local IP range used here. This is the IP range of you Local Area Network. The Routers IP cannot be included in this range. Remote IP Range:
Enter the remote IP range used here. This is the IP range of the public network from the Internet Port side. To apply this rule to any IP addresses from the public side, enter the range 0.0.0.1 to 255.255.255.254. Application Port:
Enter the application port number used here. Click on the Save Settings button to accept the changes made. Click on the Dont Save Settings button to discard the changes made. 77 D-Link DIR-803 User ManualSection 3 - Configuration Network Filters Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. Configure MAC Filtering:
Select Turn MAC Filtering Off, Allow MAC addresses listed below, or Deny MAC addresses listed below from the drop-down menu. MAC Address:
Enter the MAC address you would like to filter. To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client:
Select a DHCP client from the drop-down menu and click << to copy that MAC Address. 78 D-Link DIR-803 User ManualSection 3 - Configuration Access Control The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games. Add Policy:
Click the Add Policy button to start the Access Control Wizard. DIR-803 Click Next to continue with the wizard. Access Control Wizard 79 D-Link DIR-803 User ManualSection 3 - Configuration Enter a name for the policy and then click Next to continue. Select a schedule (I.E. Always) from the drop-down menu and then click Next to continue. Enter the following information and then click Next to continue. Address Type - Select IP address, MAC address, or Other Machines. IP Address - Enter the IP address of the computer you want to apply the rule to. Machine Address - Enter the PC MAC address (i.e. 00:00.00.00.00). Select the filtering method and then click Next to continue. 80 D-Link DIR-803 User ManualSection 3 - Configuration Enter the rule:
Enable - Check to enable the rule. Name - Enter a name for your rule. Dest IP Start - Enter the starting IP address. Dest IP End - Enter the ending IP address. Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. Your newly created policy will now show up under Policy Table. 81 D-Link DIR-803 User ManualSection 3 - Configuration Website Filters Website Filters are used to allow you to set up a list of Web sites that can be viewed by multiple users through the network. To use this feature select to Allow or Deny, enter the domain or website and click Save Settings. You must also select Apply Web Filter under the Access Control section. Add Website Filtering Rule:
Select either DENY computers access to ONLY these sites or ALLOW computers access to ONLY these sites. Website URL/
Domain:
Enter the keywords or URLs that you want to allow or block. Click Save Settings. 82 D-Link DIR-803 User ManualSection 3 - Configuration Inbound Filters The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure inbound data filtering rules that control data based on an IP address range. Inbound Filters can be used with Virtual Server, Port Forwarding, or Remote Administration features. Name:
Enter a name for the inbound filter rule. Action:
Select Allow or Deny. Enable:
Check to enable rule. Remote IP Start:
Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify an IP range. Remote IP End:
Enter the ending IP address. Enter 255.255.255.255 if you do not want to specify and IP range. Add:
Click the Add button to apply your settings. You must click Save Settings at the top to save the settings. Inbound Filter Rules List:
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. 83 D-Link DIR-803 User ManualSection 3 - Configuration Firewall Settings A firewall protects your network from the outside world. The DIR-803 offers a firewall type functionality. The SPI feature helps prevent cyber attacks. Sometimes you may want a computer exposed to the outside world for certain types of applications. If you choose to expose a computer, you can enable DMZ. DMZ is short for Demilitarized Zone. This option will expose the chosen computer completely to the outside world. Enable SPI:
SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking more state per session. It validates that the traffic passing through the session conforms to the protocol. Anti-Spoof Check:
Enable this feature to protect your network from certain kinds of spoofing attacks. 84 D-Link DIR-803 User ManualSection 3 - Configuration DMZ IP Address:
Specify the IP address of the computer on the LAN that you want to have unrestricted Internet communication. If this computer obtains its IP address automatically using DHCP, be sure to make a static reservation on the Setup > Network Settings page so that the IP address of the DMZ machine does not change. PPTP:
Allows multiple machines on the LAN to connect to their corporate network using PPTP protocol. IPSEC (VPN):
Allows multiple VPN clients to connect to their corporate network using IPSec. Some VPN clients support traversal of IPSec through NAT. This ALG may interfere with the operation of such VPN clients. If you are having trouble connecting with your corporate network, try turning this ALG off. Please check with the system administrator of your corporate network whether your VPN client supports NAT traversal. RTSP:
Allows application that uses Real Time Streaming Protocol to receive streaming media from the Internet. QuickTime and Real Player are some of the common applications using this protocol. SIP:
Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. 85 D-Link DIR-803 User ManualSection 3 - Configuration The Routing option is an advanced method of customizing specific routes of data through your network. Routing Name:
Enter a name for your route. Destination IP:
Enter the IP address of packets that will take this route. Netmask:
Enter the netmask of the route, please note that the octets must match your destination IP address. Gateway:
Enter your next hop gateway to be taken if this route is used. Metric:
The route metric is a value from 1 to 16 that indicates the cost of using this route. A value 1 is the lowest cost and 15 is the highest cost. Interface:
Select the interface that the IP packet must use to transit out of the router when this route is used. 86 D-Link DIR-803 User ManualSection 3 - Configuration Advanced Wireless Transmit Power:
Set the transmit power of the antennas. WLAN Partition:
This enables 802.11d operation. 802.11d is a wireless specification developed to allow implementation of wireless networks in countries that cannot use the 802.11 standard. This feature should only be enabled if you are in a country that requires it. WMM Enable:
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. HT20/40 Coexistence:
Enable this option to reduce interference from other wireless networks in your area. If the channel width is operating at 40MHz and there is another wireless networks channel over-lapping and causing interference, the router will automatically change to 20MHz. 87 D-Link DIR-803 User ManualSection 3 - Configuration Wi-Fi Protected Setup (WPS) Wi-Fi Protected Setup (WPS) System is a simplified method for securing your wireless network during the Initial setup as well as the Add New Device processes. The Wi-Fi Alliance (WFA) has certified it across different products as well as manufactures. The process is just as easy as pressing a button for the Push-Button Method or correctly entering the 8-digit code for the Pin Code Method. The time reduction in setup and ease of use are quite beneficial, while the highest wireless Security setting of WPA2 is automatically used. Enable:
Enable the Wi-Fi Protected Setup feature. Note: if this option is unchecked, the WPS button on the side of the router will be disabled. Lock Wireless Security Settings:
Tick this option to lock the configured wireless security settings. PIN Settings:
A PIN is a unique number that can be used to add the router to an existing network or to create a new network. Only the Administrator (admin account) can change or reset the PIN. Current PIN:
Shows the current PIN. Reset PIN to Default:
Restore the default PIN of the router. Generate New PIN:
Create a random number that is a valid PIN. This becomes the routers PIN. You can then copy this PIN to the user interface of the wireless client. 88 D-Link DIR-803 User ManualSection 3 - Configuration Add Wireless Station:
This Wizard helps you add wireless devices to the wireless network. The wizard will either display the wireless network settings to guide you through manual configuration, prompt you to enter the PIN for the device, or ask you to press the configuration button on the device. If the device supports Wi-Fi Protected Setup and has a configuration button, you can add it to the network by pressing the configuration button on the device and then the on the router within 120 seconds. The status LED on the router will flash three times if the device has been successfully added to the network. There are several ways to add a wireless device to your network. A registrar controls access to the wireless network. A registrar only allows devices onto the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well. Add Wireless Device Wizard:
Click to start the wizard and skip to page 46. WPS Button You can also simply press the WPS button on the side of the router, and then press the WPS button on your wireless client to automatically connect without logging into the router. Refer to page 130 for more information. WPS Button 89 D-Link DIR-803 User ManualSection 3 - Configuration Advanced Network Settings Enable UPnP:
To use the Universal Plug and Play (UPnP) feature click on Enabled. UPnP provides compatibility with networking equipment, software and peripherals. WAN Ping:
Checking the box will allow the DIR-803 to respond to pings. Unchecking the box may provide some extra security from hackers. WAN Port Speed:
You may set the port speed of the Internet port to 10Mbps, 100Mbps, or Auto (recommended). Enable IPV4 Multicast Streams:
Check the box to allow multicast traffic to pass through the router from the Internet (IPv4). Enable IPV6 Multicast Streams:
Check the box to allow multicast traffic to pass through the router from the Internet (IPv6). 90 D-Link DIR-803 User ManualSection 3 - Configuration The Guest Zone feature will allow you to create temporary zones that can be used by guests to access the Internet. These zones will be separate from your main wireless network. You may configure different zones for the 2.4GHz and 5GHz wireless bands. Guest Zone Enable Guest Zone:
Schedule:
Check to enable the Guest Zone feature. The schedule of time when the Guest Zone will be active. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section or click Add New. Wireless Network Name:
Enter a wireless network name (SSID) that is different from your main wireless network. Enable Routing Between Zones:
Check to allow network connectivity between the different zones created. Security Mode:
Select the type of security or encryption you would like to enable for the guest zone. 91 D-Link DIR-803 User ManualSection 3 - Configuration Tools Admin This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and user account passwords. Admin Password:
Enter a new password for the Administrator Login Name. The administrator can make changes to the settings. User Password:
Enter the new password for the User login. If you login as the User, you cannot change the settings (you can only view them). DIR-803 Gateway name:
Enter a name for your router. Enable Graphical Authentication:
Enables a challenge-response test to require users to type letters or numbers from a distorted image displayed on the screen to prevent online hackers and unauthorized users from gaining access to your routers network settings. Enable HTTPS Server:
Check to enable HTTPS to connect to the router securely. This means to connect to the router, you must enter https://192.168.0.1 (for example) instead of http://192.168.0.1. Enable Remote Management:
Remote management allows the DIR-803 to be configured from the Internet by a web browser. A username/password is still required to access the Web Management interface. Remote Admin Port:
The port number used to access the DIR-803 is used in the URL. Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-803 and 8080 is the port used for the Web Management interface. If you have enabled HTTPS Server, you must enter https:// as part of the URL to access the router remotely. Remote Admin Inbound Filter:
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. Details will display the current status. 92 D-Link DIR-803 User ManualSection 3 - Configuration The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust the time when needed. Time Time:
Displays the current date and time of the router. Time Zone:
Select your Time Zone from the drop-down menu. DIR-803 Enable Daylight Saving:
To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time. Enable NTP Server:
NTP is short for Network Time Protocol. A NTP server will synch the time and date with your router. This will only connect to a server on the Internet, not a local server. Check the box to enable this feature. NTP Server Used:
Enter the IP address of a NTP server or select one from the drop-down menu. Manual:
To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set Time. You can also click Copy Your Computers Time Settings to synch the date and time with the computer you are currently on. 93 D-Link DIR-803 User ManualSection 3 - Configuration The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your network. SysLog Enable Logging to SysLog Server:
Check this box to send the router logs to a SysLog Server. SysLog Server IP Address:
The address of the SysLog server that will be used to send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). DIR-803 94 D-Link DIR-803 User ManualSection 3 - Configuration The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address. Email Settings Enable Email Notification:
When this option is enabled, router activity logs are emailed to a designated email address. From Email Address:
This email address will appear as the sender when you receive a log file or firmware upgrade notification via email. DIR-803 To Email Address:
Enter the email address where you want the email sent. SMTP Server Address:
Enter the SMTP server address for sending email. SMTP Server Port:
Enter the SMTP port used on the server. Enable Authentication:
Check this box if your SMTP server requires authentication. Account Name:
Enter your account for sending email. Password:
Enter the password associated with the account. Re-type the password associated with the account. On Log Full:
When this option is selected, logs will be sent via email to your account when the log is full. On Schedule:
Selecting this option will send the logs via email according to schedule. Schedule:
This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create a schedule, go to Tools > Schedules. 95 D-Link DIR-803 User ManualSection 3 - Configuration This section allows you to manage the routers configuration settings, reboot the router, and restore the router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules that youve created. System Save Settings to Local Hard Drive:
Use this option to save the current router configuration settings to a file on the hard disk of the computer you are using. First, click the Save button. A file dialog will appear, allowing you to select a location and file name for the settings. DIR-803 Load Settings from Local Hard Drive:
Use this option to load previously saved router configuration settings. First, use the Browse option to find a previously saved file of configuration settings. Then, click the Load button to transfer those settings to the router. Restore to Factory Default Settings:
This option will restore all configuration settings back to the settings that were in effect at the time the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device:
Click to reboot the router. 96 D-Link DIR-803 User ManualSection 3 - Configuration You can upgrade the firmware of the access point here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support website for firmware updates at http://support.dlink.com. You can download firmware upgrades to your hard drive from this site. Firmware Browse:
Upload:
After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. Click Upload to complete the firmware upgrade. DIR-803 Once you have a firmware update on your computer, use this option to browse for the file and then upload the information into the access point. Language Pack You can change the language of the web UI by uploading available language packs. Browse:
After you have downloaded the new language pack, click Browse to locate the language pack file on your hard drive. Click Upload to complete the language pack upgrade. 97 D-Link DIR-803 User ManualSection 3 - Configuration Dynamic DNS The DDNS feature allows you to host a server (Web, FTP, Game Server, etc) using a domain name that you have purchased
(www.whateveryournameis.com) with your dynamically assigned IP address. Most broadband Internet Service Providers assign dynamic (changing) IP addresses. Using a DDNS service provider, your friends can enter in your domain name to connect to your server no matter what your IP address is. Enable Dynamic DNS:
Dynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. Check the box to enable DDNS. Server Address:
Select your DDNS provider from the drop-down menu or enter the DDNS server address. DIR-803 Host Name:
Enter the Host Name that you registered with your DDNS service provider. Username or Key:
Enter the Username or key for your DDNS account. Password or Key:
Enter the Password or key for your DDNS account. Timeout:
Enter a timeout time (in hours). Status:
Displays the current connection status. 98 D-Link DIR-803 User ManualSection 3 - Configuration System Check Ping Test:
The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP address that you wish to Ping and click Ping. DIR-803 IPv6 Ping Test:
Enter the IPv6 address that you wish to Ping and click Ping. Ping Results:
The results of your ping attempts will be displayed here. 99 D-Link DIR-803 User ManualSection 3 - Configuration Schedules can be created for use with enforcing rules. For example, if you want to restrict web access to Mon-Fri from 3pm to 8pm, you could create a schedule selecting Mon, Tue, Wed, Thu, and Fri and enter a Start Time of 3pm and End Time of 8pm. Schedules Name:
Enter a name for your new schedule. Days:
Select a day, a range of days, or All Week to include every day. DIR-803 Time:
Check All Day - 24hrs or enter a start and end time for your schedule. Save:
You must click Save Settings at the top for your schedules to go into effect. Schedule Rules List:
The list of schedules will be listed here. Click the Edit icon to make changes or click the Delete icon to remove the schedule. 100 D-Link DIR-803 User ManualSection 3 - Configuration Status Device Info This page displays the current information for the DIR-803. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP. If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection. General:
Displays the routers time and firmware version. DIR-803 WAN:
Displays the MAC address and the public IP settings LAN:
Displays the MAC address and the private (local) IP settings for the router. Wireless LAN1:
Displays the 2.4GHz wireless MAC address and your wireless settings such as SSID and Channel. Wireless LAN2:
Displays the 5GHz wireless MAC address and your wireless settings such as SSID and Channel. LAN Computers:
Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). 101 D-Link DIR-803 User ManualSection 3 - Configuration Logs The router automatically logs (records) events of possible interest in its internal memory. If there isnt enough internal memory for all events, logs of older events are deleted but logs of the latest events are retained. The Logs option allows you to view the router logs. You can define what types of events you want to view and the level of the events to view. This router also has external Syslog Server support so you can send the log files to a computer on your network that is running a Syslog utility. Log Options:
You can select the types of messages that you want to display from the log. System Activity, Debug Information, Attacks, Dropped Packets, and Notice messages can be selected. Click Apply Log Settings Now to activate your settings. DIR-803 Refresh:
Updates the log details on the screen so it displays any recent activity. First Page:
Click to go to the first page. Last Page:
Click to go to the last page. Previous:
Click to go back one page. Next:
Click to go to the next page. Clear:
Clears all of the log contents. Email Now:
This option will send a copy of the router log to your email address configured in the Tools > Email Settings screen. Save Log:
This option will save the router log to a file on your computer. 102 D-Link DIR-803 User ManualSection 3 - Configuration The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-803 on both the WAN, LAN ports and the wireless segments. The traffic counter will reset if the device is rebooted. Statistics DIR-803 103 D-Link DIR-803 User ManualSection 3 - Configuration The Internet Sessions page displays full details of active Internet sessions through your router. An Internet session is a conversation between a program or application on a LAN-side computer and a program or application on a WAN-side computer. Internet Sessions DIR-803 104 D-Link DIR-803 User ManualSection 3 - Configuration This page will display your current routing table. Routing DIR-803 105 D-Link DIR-803 User ManualSection 3 - Configuration The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. Wireless DIR-803 106 D-Link DIR-803 User ManualSection 3 - Configuration The IPv6 page displays a summary of the Routers IPv6 settings and lists the IPv6 address and host name of any IPv6 clients. IPv6 DIR-803 107 D-Link DIR-803 User ManualSection 3 - Configuration Support DIR-803 108 D-Link DIR-803 User ManualSection 3 - Configuration Connect a Wireless Client to your Router WPS Button The easiest and most secure way to connect your wireless devices to the router is WPS (Wi-Fi Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button
(or a software utility with WPS) that you can press to connect to the DIR-803 router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1 - Press the WPS button on the side of DIR-803 for about 1 second. The Internet LED on the front will start to blink. WPS Button Step 2 - Within 2 minutes, press the WPS button on your wireless client (or launch the software utility and start the WPS process). Step 3 - Allow up to 1 minute to configure. Once the Internet light stops blinking, you will be connected and your wireless connection will be secure with WPA2. 109 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network Windows 8 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being used. To join an existing network, locate the wireless network icon in the taskbar, next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks which are within connecting proximity of your computer. Select the desired network by clicking on the network name. 110 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you can also press the WPS button on your router at the point to enable the WPS function. When you have established a successful connection a wireless network, the word Connected will appear next to the name of the network to which you are connected. 111 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network Windows 7 WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Click on the wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon 112 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network 3. Highlight the wireless connection with Wi-Fi name (SSID) you would like to connect to and click the Connect button. If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. 113 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network 5. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. You can also connect by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. 114 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network The WPS feature of the DIR-803 can be configured using Windows 7. Carry out the following steps to use Windows 7 to configure the WPS feature:
WPS 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. 115 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network 3. Double-click the DIR-803. 4. Input the WPS PIN number (on the router label or in the Setup >
Wireless Setup menu in the Routers Web UI) and click Next. 116 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. 117 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network 7. The following window appears while the router is being configured. Wait for the configuration to complete. 8. The following window informs you that WPS on the router has been setup successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. 118 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network Windows Vista Windows Vista users may use the built-in wireless utility. If you are using another companys utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows Vista utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select Connect to a network. The utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/
IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 119 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network WPA/WPA2 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used. 1. Open the Windows Vista Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. 120 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network 3. Enter the same security key or passphrase (Wi-Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. 121 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network WPS/WCN 2.0 The router supports Wi-Fi protection, referred to as WCN 2.0 in Windows Vista. The following instructions for setting this up depends on whether you are using Windows Vista to configure the router or third party software. When you first set up the router, Wi-Fi protection is disabled and unconfigured. To enjoy the benefits of Wi-Fi protection, the router must be both enabled and configured. There are three basic methods to accomplish this: use Windows Vistas built-in support for WCN 2.0, use software provided by a third party, or manually configure. If you are running Windows Vista, log into the router and click the Enable checkbox in the Basic > Wireless section. Use the Current PIN that is displayed on the Advanced > Wi-Fi Protected Setup section or choose to click the Generate New PIN button or Reset PIN to Default button. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. 122 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network Windows XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another companys utility, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a site survey option similar to the Windows XP utility as seen below. If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility. or Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks. The utility will display any available wireless networks in your area. Click on a Wi-Fi network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/
IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 123 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network WPA/WPA2 It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the WPA key being used. 1. Open the Windows XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the Wi-Fi network (SSID) you would like to connect to and click Connect. 124 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network 3. The Wireless Network Connection box will appear. Enter the WPA-PSK Wi-Fi password and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The Wi-Fi password must be exactly the same as on the wireless router. 125 D-Link DIR-803 User ManualSection 4 - Connecting to a Wireless Network Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-803. Read the following descriptions if you are having problems. The examples below are illustrated in Windows XP. If you have a different operating system, the screenshots on your computer will look similar to the following examples. 1. Why cant I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.0.1 for example), you are not connecting to a website nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. Make sure you have an updated Java-enabled web browser. We recommend the following:
- Microsoft Internet Explorer 7 and higher
- Mozilla Firefox 3.5 and higher
- Google Chrome 8 and higher
- Apple Safari 4 and higher Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. Disable any Internet security software running on the computer. Software firewalls such as Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, and Windows XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. 126 D-Link DIR-803 User ManualSection 5 - Troubleshooting Configure your Internet settings:
Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing is checked. Click OK. Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times. Close your web browser (if open) and open it. Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management. If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30 seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer. 2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. Unfortunately this process will change all your settings back to the factory defaults. To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. 127 D-Link DIR-803 User ManualSection 5 - Troubleshooting 3. Why cant I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail, we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc). To find the proper MTU Size, youll have to do a special ping of the destination youre trying to go to. A destination could be another computer, or a URL. Click on Start and then click Run. Windows 95, 98, and Me users type in command (Windows NT, 2000, XP, Vista, and 7 users type in cmd) and press Enter (or click OK). Once the window opens, youll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472 128 D-Link DIR-803 User ManualSection 5 - Troubleshooting You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network were working with (1452+28=1480). Once you find your MTU, you can now configure your router with the proper MTU size. To change the MTU rate on your router follow the steps below:
Open your browser, enter the IP address of your router (192.168.0.1) and click OK. Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for the device. Click on Setup and then click Manual Configure. To change the MTU enter the number in the MTU field and click Save Settings to save your settings. Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. 129 D-Link DIR-803 User ManualSection 5 - Troubleshooting Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers. A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users. Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. 130 D-Link DIR-803 User ManualAppendix A - Wireless Basics What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or office network. Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. How does wireless work?
Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN). Wireless Local Area Network (WLAN) In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other outdoor venues. 131 D-Link DIR-803 User ManualAppendix A - Wireless Basics Wireless Personal Area Network (WPAN) Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away. Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesnt use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether its for home, office, business, D-Link has a wireless solution for it. Home Gives everyone at home broadband access Surf the web, check email, instant message, etc. Gets rid of the cables around the house Simple and easy to use Stay on top of everything at home as you would at office Remotely access your office network from home Share Internet connection and printer with multiple computers No need to dedicate office space Small Office and Home Office 132 D-Link DIR-803 User ManualAppendix A - Wireless Basics Where is wireless used?
Wireless technology is expanding everywhere not just at home or office. People like the freedom of mobility and its becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called hotspots. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers. Wireless network is easy to setup, but if youre installing it for the first time it could be quite a task not knowing where to start. Thats why weve put together a few setup steps and tips to help you through the process of setting up a wireless network. Tips Here are a few things to keep in mind, when you install a wireless network. Centralize your router or Access Point Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range. Eliminate Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. Security 133 D-Link DIR-803 User ManualAppendix A - Wireless Basics Dont let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up. Wireless Modes There are basically two modes of networking:
Infrastructure All wireless clients will connect to an access point or wireless router. Ad-Hoc Directly connecting to another computer, for peer-to-peer communication, using wireless network adapters on each computer, such as two or more DIR-803 wireless network Cardbus adapters. An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. 134 D-Link DIR-803 User ManualAppendix A - Wireless Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start > Run. In the run box type cmd and click OK. (Windows 7/Vista users type cmd in the Start Search box.) At the prompt, type ipconfig and press Enter. This will display the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. 135 D-Link DIR-803 User ManualAppendix B - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1 Windows 7 -
Windows Vista - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Click on Start > Control Panel > Network and Internet > Network and Sharing Center. Windows XP -
Windows 2000 - From the desktop, right-click My Network Places > Properties. Connections. Click on Start > Control Panel > Network Connections. Step 2 Right-click on the Local Area Connection which represents your network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the routers LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (I.E. 192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. 136 D-Link DIR-803 User ManualAppendix B - Networking Basics Technical Specifications LAN Interface: Four 10/100 Mbps LAN ports Hardware Specifications WAN Interface: One 10/100 Mbps Internet port Wireless Interface (2.4 GHz): IEEE 802.11b/g/n Wireless Interface (5 GHz): IEEE 802.11a/n/ac Operating Voltage Output: DC 5 V, 1 A Input: 100~240 V (20%), 50~60 Hz Temperature Operating: 32 ~ 104 oF (0 ~ 40 oC) Non-Operating: -4 ~ 149 oF (-20 ~ 65 oC) Humidity Operating: 10% - 90% non-condensing Non-Operating: 5% - 95% non-condensing Wireless Frequency Range1 IEEE 802.11a: 5180 MHz~5240 MHz, 5745 MHz~5825 MHz IEEE 802.11b: 2400 MHz~2483 MHz IEEE 802.11g: 2400 MHz~2484 MHz IEEE 802.11n: 2400 MHz~2484 MHz, 5180 MHz~5240 MHz, 5745 MHz~5825 MHz IEEE 802.11ac: 5180 MHz~5240 MHz, 5745 MHz~5825 MHz Wireless Bandwidth Rate IEEE 802.11a: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps IEEE 802.11b: 11, 5.5, 2, and 1 Mbps IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps IEEE 802.11n: 6.5 to 300 Mbps IEEE 802.11ac (draft): 6.5 to 433 Mbps Antenna Type Two external antennas Wireless Security WPA/WPA2-Personal, WPA/WPA2-Enterprise, WPS (PIN & PBC) Certifications FCC CE CSA Dimensions & Weight 143.54 x 101.36 x 28.89 mm 176.2 grams 1 Wireless frequency range may vary according to regional regulations. 137 D-Link DIR-803 User ManualAppendix C - Technical Specifications Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal-
lation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one of the following measures:
-
-
-
-
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 138 D-Link DIR-803 User Manual Industry Canada statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme CNR-210 dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
Avertissement:
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration dexposition aux radiations:
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 139 D-Link DIR-803 User Manual
1 2 | User Manual 2 | Users Manual | 406.30 KiB |
QUICK INSTALLATION GUIDEWIRELESS AC 750 DUAL-BAND EASY ROUTERGO-RT-AC750INSTALLATIONSANLEITUNGGUIDE DINSTALLATIONGUA DE INSTALACINGUIDA DI INSTALLAZIONEINSTRUKCJA INSTALACJIINSTALAN PRUKATELEPTSI SEGDLET IMPORTANT INFORMATION IMPORTANT INFORMATION REGARDING YOUR INTERNET SUBSCRIPTION
!
EN USERS WHO SUBSCRIBE TO LIMITED OR PAY AS YOU USE BROADBAND INTERNET ACCESS. In the WAN configuration settings, there is a parameter called Maximum idle timer. This parameter controls how many seconds of inactivity before dropping connection to the Internet. The default setting is 0 which disables this functionality and the Internet will be connected all the time. We suggest that you should change the Maximum idle timer to 300 (5 minutes) so that the device will drop the line after 5 minutes of inactivity and keep usage costs down. USERS WHO SUBSCRIBE TO UNLIMITED BROADBAND INTERNET ACCESS. You can just leave this parameter unchanged or enable Auto-reconnect to be always online. TECHNICAL NOTES:
The Maximum idle timer is only relevant if your ISP is using PPPoE connection. INFORMATION IMPORTANTE CONCERNANT VOTRE ABONNEMENT INTERNET FR AUX UTILISATEURS QUI ONT SOUSCRIT UN ABONNEMENT LIMIT OU AVEC PAIEMENT UNIQUEMENT LUTILISATION . Au niveau du paramtrage de la configuration WAN, un paramtre est appel Maximum idle timer. Ce paramtre contrle le nombre de secondes dinactivit avant la coupure de la connexion Internet.. Le paramtre par dfaut est 0, ce qui dvalide cette fonctionnalit et vous connecte internet tout le temps. Nous vous conseillons de changer le Maximum idle timer 300 (5 minutes) de sorte que la ligne soit coupe aprs 5 minutes dinactivit pour limiter les cots. AUX UTILISATEURS QUI ONT SOUSCRIT UN ABONNEMENT INTERNET ILLIMIT. Vous pouvez laisser ce paramtre 0 ou valider lAuto-reconnexion pour toujours tre en ligne. NOTE TECHNIQUE :
Le Maximum idle timer est utile uniquement si votre FAI utilise une connexion PPPoE. INFORMAZIONE IMPORTANTE RIGUARDANTE LA REGISTRAZIONE IN INTERNET IT PER GLI UTENTI CHE SOTTOSCRIVONO UN ABBONAMENTO INTERNET BROADBAND LIMITATO O A PAGAMENTO PER IL TRAFFICO DATI EFFETTUATO Nelle impostazioni della configurazione WAN, c un parametro chiamato Maximum idle timer. Questo parametro controlla i secondi di inattivit prima di chiudere la connessione ad Internet. Limpostazione di default 0 che disabilita questa funzione cosicch la connessione ad Internet sempre attiva in ogni momento. Suggeriamo di cambiare il parametro di Maximum idle timer a 300 (5 minuti) cosicch il dispositivo fermer la connessione dopo 5 minuti di inattivit. In questo modo il costo della telefonate sar ridotto. PER GLI UTENTI CHE SOTTOSCRIVONO UN ABBONAMENTO INTERNET BROADBAND ILLIMITATO. E possibile lasciare questo parametro invariato o abilitare la funzione di auto-connessione per rimanere sempre connessi NOTA TECNICA :
Il parametro Maximum idle timer rilevante solo se lISP utilizza una connessione PPPoE 2 GO-RT-AC750ENGLISH INFORMACIN IMPORTANTE ACERCA DE LA SUBSCRIPCIN A INTERNET ES LOS USUARIOS SUSCRITOS, EN LOS PARMETROS DE CONFIGURACIN WAN, A UN ACCESO A INTERNET DE BANDA ANCHA LIMITADO O DE PAGO POR USO. Encontrarn un parmetro llamado Maximum idle timer. Este parmetro controla cuntos segundos de inactividad se permiten antes de que se interrumpa la conexin a Internet. El valor por defecto es 0, y desactiva esta funcionalidad, con lo que se estar conectado ininterrumpidamente a Internet. Se recomienda que se modifique el valor de Maximum idle timer a 300 (5 minutos); as el dispositivo cortar la lnea tras 5 minutos de inactividad y se reducirn los costes por uso. LOS USUARIOS SUSCRITOS A UN ACCESO A INTERNET DE BANDA ANCHA ILIMITADO. Pueden dejar este parmetro como se encuentra o bien activar Auto-reconnect para estar siempre conectados. NOTAS TCNICAS:
Maximum idle timer slo es relevante si el ISP usa una conexin PPPoE. WICHTIGE HINWEISE ZUR INTERNET-VERBINDUNG DE Beachten Sie bitte, dass bei dem Einsatz eines Routers (oder Modem in Betriebsart "PPPoE") hohe Verbindungskosten entstehen knnen. Sie mssen die Einstellungen des Routers Ihrem Tarif und Ihren Surfgewohnheiten anpassen, um zustzliche Kosten zu vermeiden. Insbesondere dann, wenn sie einen Tarif nutzen, bei dem Ihnen die Kosten auf der Basis Ihrer Online-Zeit in Rechnung gestellt werden (zeitbasierend), mssen Sie Ihren Router durch korrekte Einstellung dazu veranlassen, die Verbindung bei Inaktivitt zu trennen. Bei Nutzung eines Tarifs der auf einem festgelegten Volumen (bertragene Datenmenge) beruht, sollten Sie entsprechende Einstellungen verwenden. Auch bei der Nutzung einer Flatrate (Volumen und Zeit unabhngiger Tarif) ist die richtige Wahl der Routereinstellung vorzunehmen. Nach Durchfhrung der Einstellungen sollten Sie sich vergewissern, dass Ihre Einstellungen vom Gert bernommen worden sind. Am besten knnen Sie dies prfen, indem Sie das Gert kurz von der Versorgungsspannung trennen und dann das Konfigurationsmen erneut aufrufen. Im Weiteren werden die Einstellungen erlutert, die Sie aktivieren mssen um das entsprechende Verhalten des Gertes auszulsen.
"ALWAYS-ON" - "MANUAL" - "CONNECT-On-DEMAND" "IMMER AN "- "MANUELL" - "AUF ANFRAGE"
Diese Funktionen steuern das Online-Verhalten der Produkte:
DI (DIR)- Produkte: (siehe auch Hinweis Maximum Idle Time) Always-On : Router bleibt stndig mit dem Internet verbunden Manual: Sie mssen im Menu Status des Routers die Verbindung manuell aktivieren Connect on Demand: Bei einer Verbindungsanfrage aus Ihrem LAN baut der Router die Verbindung zum Internet automatisch auf. DSL - Produkte: (siehe auch Hinweis > Maximum Idle Time) Connect on Demand: Bei einer Verbindungsanfrage aus Ihrem LAN baut der Router die Verbindung zum Internet automatisch auf. Wird dieser Funktion nicht aktiviert, dann bleibt das Gerat stndig mit dem Internet verbunden.
"MAXIMUM IDLE TIME" "Maximal unttige Zeit / Leerlaufzeit"
Nach dieser Zeitdauer wird der Router eine ungenutzte Internetverbindung trennen. Wird hier die Ziffer "0" eingegeben, dann trennt der Router die Verbindung nicht und bleibt mit dem Internet verbunden. Dieses Verhalten ist unabhngig von den anderen Einstellungen des Routers. Bewhrt hat sich eine "MAXIMUM IDLE TIME" von 5 Minuten oder 300 Sekunden. Zustzlicher Hinweis:
In vielen Fllen werden unerwnschte Anwhlen durch installierte Messenger Programme, Virenscanner oder Programme, die Online Updates suchen, verursacht. Auch ein E-Mail Programm kann das Verbinden oder "Online bleiben" verursachen, genauso aber auch ein Trojaner oder Virus im System. Eine fehlende Verschlsselung im Wireless Bereich oder einen von Ihnen zustzlich installierten und ber das Netzwerk mit Ihrem Router verbundenen Accesspoint kann externen Personen die Nutzung Ihres DSL Anschlusses erlauben. berprfen Sie Ihre Gerte in dieser Hinsicht. Wir empfehlen Ihnen, www.dlink.de auf aktuelle Firmware zu berprfen und die Produkte zu aktualisieren. berprfen Sie nach einem Firmware Update erneut das WAN Men auf die korrekten Einstellungen und im Betrieb den Router auf das Online-Verhalten. 3 GO-RT-AC750ENGLISH CONTENTS OF PACKAGING CONTENTS WIRELESS AC 750 DUAL-BAND EASY ROUTER GO-RT-AC750 POWER ADAPTER 5V / 1A ETHERNET CABLE (CAT5 UTP) CONNECT THE ROUTER TO YOUR PC DURING SETUP Wi-Fi Configuration Note WI-FI CONFIGURATION NOTE CONTAINS THE DEFAULT WI-FI INFORMATION If any of these items are missing from your packaging, contact your reseller. 4 GO-RT-AC750ENGLISH PRODUCT SETUP WEB-BASED SETUP PC Modem Router Modem Router PC Modem Router WELCOME TO THE D-LINK SETUP WIZARD Step 1 Position your GO-RT-AC750 near your Internet-connected modem and PC. Keep the router in an open area for better wireless coverage. Step 2 Unplug the modem Ethernet cable connected to your computer and plug it into the port labeled INTERNET on the router. Connect the supplied power adapter to the router and a power outlet, then verify that the power LED is on. Step 3 Plug one end of the supplied Ethernet cable into the port labeled 1 on the back of the router, and the other end into the Ethernet port on your computer. To set up the GO-RT-AC750 through Wi-Fi, go to your computer or mobile device's Wi-Fi settings and select the network (ex: dlink-
A8FA). Enter Wi-Fi password (ex: akbdj19368) on the included Wi-Fi Configuration Note. Step 4 Open a browser on the connected computer. If you are not automatically directed to the D-Link Setup Wizard, go to http://dlinkrouter.local./ and follow the onscreen instructions to configure your GO-RT-AC750. Use Admin as your username and leave the password blank to configure manually. 5 GO-RT-AC750ENGLISH TROUBLESHOOTING SETUP AND CONFIGURATION PROBLEMS 1. HOW DO I CONFIGURE MY GO-RT-AC750 ROUTER MANUALLY?
- Connect your PC to the router using an Ethernet cable.
- Open a web browser and enter the address http://dlinkrouter.local./ (or 192.168.0.1).
- The default username is Admin. The password should be left blank by default.
- If you have changed the password and can not remember it, you will need to reset the router to return to an empty password field. 2. HOW DO I RESET MY GO-RT-AC750 ROUTER TO FACTORY DEFAULT SETTINGS?
- Ensure the router is powered on.
- Press and hold the reset button at the bottom of the device for 10 seconds. Note: Resetting the router to factory default will erase the current configuration settings. To re-configure your settings, log into the router as outlined in question 1, then run the Setup Wizard. 3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY WI-FI NAME (SSID) OR WI-FI PASSWORD?
- For every PC that needs to connect to the router wirelessly, you will need to ensure you use the correct Wi-Fi Name (SSID) and Wi-Fi password.
- Use the web-based user interface (as described in question 1 above) to check or choose your wireless settings.
- Make sure you write down these settings so that you can enter them for each wirelessly connected PC. The back of this document features an area to record this important information. 4. WHY CAN'T I GET AN INTERNET CONNECTION?
For ADSL users, please contact your ISP to make sure the service has been enabled/connected by your ISP and that your ISP username and password is correct. For additional languages QIG and full product manual, please refer to the website www.dlink.com To download the latest firmware, please refer to the website www.dlink.com TECHNICAL SUPPORT United Kingdom (Mon-Fri) website: http://www.dlink.com Home Wireless/Broadband 0871 873 3000 (9.00am06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am- 05.30pm)
(BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) Phone rates: 0.05ppm peak, 0.045ppm off peak times 6 GO-RT-AC750ENGLISH PACKUNGS-
INHALT INHALT WIRELESS AC 750 DUAL-BAND EASY ROUTER GO-RT-AC750 STROMADAPTER/STECKERNETZTEIL 5V / 1A ETHERNET-KABEL (CAT5 UTP) SCHLIESSEN SIE DEN ROUTER WHREND DES SETUP-
VORGANGS AN IHREN PC AN Wi-Fi-Konfigurationshinweis WI-FI-KONFIGURATIONSHINWEIS ENTHLT DIE STANDARDMSSIGEN WI-FI-
INFORMATIONEN Wenn eines dieser Elemente in Ihrer Packung fehlt, wenden Sie sich bitte an Ihren Fachhndler. 7 GO-RT-AC750DEUTSCH EINRICHTUNG DES PRODUKTS WEBBASIERTE EINRICHTUNG PC Modem Router Modem Router PC Modem Router WELCOME TO THE D-LINK SETUP WIZARD Schritt 1 Stellen Sie Ihren GO-RT-AC750 in der Nhe des mit dem Internet verbundenen Modems und PCs auf. Um eine bessere drahtlose Abdeckung zu erzielen, stellen Sie den Router an einem leicht zugnglichen und offenen Bereich auf. Schritt 2 Ziehen Sie das an Ihren Computer angeschlossene Modem-
Ethernet-Kabel ab und stecken Sie es in den als INTERNET gekennzeichneten Port des Routers. Schlieen Sie das mitgelieferte Netzteil an den Router und eine Steckdose an. Vergewissern Sie sich dann, dass die Betriebsanzeige-LED leuchtet. Schritt 3 Stecken Sie das eine Ende des im Lieferumfang enthaltenen Ethernet-Kabels in den mit 1 gekennzeichneten Port auf der Rckseite des Routers und das andere Ende in den Ethernet-Port Ihres Computers. Um den GO-RT-AC750 ber Wi-Fi einzurichten, zeigen Sie die Wi-
Fi-Einstellungen Ihres Computers oder des mobilen Gerts an und whlen Sie das Netzwerk (z. B.: dlink-A8FA). Geben Sie das auf dem mitgelieferten Wi-Fi Konfigurationshinweis angegebene Wi-Fi Kennwort (z. B.: akbdj19368) ein. Schritt 4 ffnen Sie einen Browser auf dem verbundenen Computer. Falls Sie nicht automatisch auf die Seite des D-Link Setup-Assistenten weitergeleitet werden, rufen Sie http://dlinkrouter.local./ auf und folgen Sie den Anweisungen auf dem Bildschirm zur Konfiguration Ihres GO-RT-AC750. Verwenden Sie Admin als Ihren Benutzernamen und lassen Sie das Feld fr das Kennwort leer, um die Konfiguration manuell vorzunehmen. 8 GO-RT-AC750DEUTSCH FEHLERBEHEBUNG EINRICHTUNGS- UND KONFIGURATIONSPROBLEME 1. WIE KONFIGURIERE ICH MEINEN GO-RT-AC750 ROUTER MANUELL?
- Schlieen Sie Ihren PC mithilfe eines Ethernet-Kabels an den Router an.
- ffnen Sie einen Webbrowser und geben Sie die Adresse http://dlinkrouter.local./ (oder 192.168.0.1) ein.
- Der standardmig vorgegebene Benutzername ist Admin. Das Feld fr das Vorgabekennwort sollte leer bleiben.
- Wenn Sie das Kennwort gendert haben und sich nicht daran erinnern knnen, mssen Sie den Router zurcksetzen, um das Kennwort zurck auf ein leeres Feld zu setzen. 2. WIE SETZE ICH MEINEN GO-RT-AC750 ROUTER AUF DIE WERKSEITIGEN STANDARDEINSTELLUNGEN ZURCK?
- Stellen Sie sicher, dass der Router eingeschaltet ist.
- Halten Sie die Rcksetztaste (Reset) auf der Unterseite des Gertes 10 Sekunden lang gedrckt. Hinweis: Wenn Sie den Router auf die werkseitigen Voreinstellungen zurcksetzen, werden alle aktuellen Konfigurationseinstellungen gelscht. Um die Einstellungen neu zu konfigurieren, melden Sie sich wie unter Frage 1 beschrieben beim Router an und starten Sie den Setup-
Assistenten. 3. WIE FGE ICH EINEN NEUEN DRAHTLOSEN CLIENT ODER PC HINZU, WENN ICH DEN NAMEN MEINES DRAHTLOSEN NETZWERKS (SSID) ODER DAS WI-FI KENNWORT VERGESSEN HABE?
- Fr jeden PC, der kabellos mit dem Router verbunden werden soll, mssen Sie sicherstellen, dass Sie den korrekten Wi-Fi Namen (SSID) und das WiFi-Kennwort verwenden.
- Verwenden Sie die webbasierte Benutzeroberflche (wie in Frage 1 weiter oben geschrieben), um Ihre Funkeinstellungen zu prfen oder zu whlen.
- Sie sollten diese Einstellungen unbedingt aufschreiben, damit Sie sie fr jeden drahtlos verbundenen PC eingeben knnen. Damit Sie sich diese wichtigen Informationen notieren knnen und fr den zuknftigen Gebrauch schnell verfgbar haben, steht Ihnen auf der Rckseite dieses Dokuments ein entsprechend dafr vorgesehener Platz zur Verfgung. 4. WARUM KANN ICH KEINE INTERNETVERBINDUNG HERSTELLEN?
ADSL-Nutzer sollten sich an ihren Internetdienstanbieter wenden und sich vergewissern, dass der ADSL-Dienst aktiviert wurde und/oder eine Verbindung zum Anbieter vorliegt und dass ihr vom Internetdienstanbieter zugewiesener Benutzername und ihr Kennwort korrekt sind. Zustzliche Sprachpakete, die Schnellinstallationsanleitung und ein umfassendes Handbuch zum Produkt finden Sie im Internet unter www.dlink.com/de/de/support Um die aktuelle Firmware herunterzuladen, rufen Sie bitte die folgende Webseite auf:
www.dlink.comwww.dlink.com TECHNISCHE UNTERSTTZUNG Deutschland: Web: http://www.dlink.com Telefon: +49(0)1805 2787 0,14 pro Minute Zeiten: Mo. Fr. 09:00 17:30 Uhr sterreich: Web: http://www.dlink.com Telefon: +43(0)820 480084 0,116 pro Minute Zeiten: Mo. Fr. 09:00 17:30 Uhr Schweiz: Web: http://www.dlink.com Telefon: +41(0)848 331100 0,08 CHF pro Minute Zeiten: Mo. Fr. 09:00 17:30 Uhr
* Gebhren aus Mobilnetzen und von anderen Providern knnen abweichen. 9 GO-RT-AC750DEUTSCH CONTENU DE LA BOTE CONTENU WIRELESS AC 750 DUAL-BAND EASY ROUTER GO-RT-AC750 ADAPTATEUR SECTEUR 5V / 1A CBLE ETHERNET (CAT 5 UTP) CONNECTEZ LE ROUTEUR AU PC PENDANT LA CONFIGURATION. Note sur la configuration du Wi-Fi NOTE SUR LA CONFIGURATION DU WI-FI COMPORTE LES DONNES WI-FI PAR DFAUT Contactez immdiatement votre revendeur sil manque lun de ces lments dans la bote. 10 GO-RT-AC750FRANAIS CONFIGURATION DU PRODUIT CONFIGURATION WEB PC Modem Router Modem Router PC Modem Router WELCOME TO THE D-LINK SETUP WIZARD tape 1 Placez votre GO-RT-AC750 proximit de votre modem et de votre PC connects Internet. Laissez le routeur dans une zone ouverte pour obtenir une meilleure couverture sans fil. tape 2 Dbranchez le cble Ethernet du modem connect votre ordinateur et branchez-le dans le port tiquet INTERNET du routeur. Connectez l'adaptateur secteur fourni au routeur et une prise de courant, puis vrifiez que le voyant d'alimentation s'allume. tape 3 Branchez une extrmit du cble Ethernet fourni au port tiquet 1 l'arrire du routeur et l'autre extrmit, au port Ethernet de votre ordinateur. Pour configurer le GO-RT-AC750 avec une connexion Wi-Fi, accdez aux paramtres Wi-Fi de votre ordinateur ou de votre priphrique mobile, puis slectionnez le rseau (par ex. dlink-
A8FA). Entrez le mot de passe Wi-Fi (par ex. akbdj19368) indiqu sur la Note de configuration Wi-Fi fournie. tape 4 Ouvrez un navigateur sur l'ordinateur connect. Si vous n'tes pas redirig automatiquement vers l'Assistant de configuration D-Link, saisissez l'adresse http://dlinkrouter.local./ , puis suivez les instructions l'cran pour configurer votre GO-RT-AC750. Utilisez le nom d'utilisateur Admin et laissez le mot de passe vierge pour raliser une configuration manuelle. 11 GO-RT-AC750FRANAIS RSOLUTION DES PROBLMES PROBLMES D'INSTALLATION ET DE CONFIGURATION 1. COMMENT CONFIGURER MON ROUTEUR GO-RT-AC750 MANUELLEMENT ?
- Connectez votre PC au routeur laide dun cble Ethernet.
- Ouvrez un navigateur Web, puis saisissez l'adresse http://dlinkrouter.local./ (ou 192.168.0.1).
- Le nom dutilisateur par dfaut est Admin . Le mot de passe doit rester vide par dfaut.
- Si vous avez modifi le mot de passe et que vous ne vous en souvenez pas, vous devez rinitialiser le routeur pour que le champ Password (Mot de passe) redevienne vide. 2. COMMENT RINITIALISER LE ROUTEUR GO-RT-AC750 AUX PARAMTRES D'USINE ?
- Vrifiez que le routeur est sous tension.
- Appuyez sur le bouton de rinitialisation situ au-dessous de l'appareil pendant 10 secondes. Remarque : Le fait de rtablir les paramtres d'usine du routeur efface l'ensemble des paramtres de la configuration actuelle. Pour reconfigurer vos paramtres, connectez-vous au routeur comme expliqu en rponse la question 1, puis lancez l'assistant de configuration. 3. COMMENT FAIRE POUR AJOUTER UN NOUVEAU CLIENT OU PC SANS FIL SI J'AI OUBLI LE NOM DE MON RSEAU WI-FI (SSID) OU MON MOT DE PASSE WI-FI ?
- Pour pouvoir connecter sans fil un PC au routeur, vous devez utiliser le nom (SSID) et le mot de passe Wi-Fi corrects.
- Utilisez l'interface utilisateur Web (comme dcrit en rponse la question 1) pour vrifier les paramtres sans fil ou en choisir d'autres.
- Veillez noter ces paramtres afin de pouvoir les entrer dans chaque PC connect sans fil. Le verso de ce document comporte une zone o enregistrer ces informations importantes. 4. POURQUOI EST-CE QUE JE NE PARVIENS PAS TABLIR UNE CONNEXION INTERNET ?
Pour les utilisateurs de l'ADSL, contactez votre FAI pour vous assurer que le service est bien activ, et que le nom d'utilisateur et le mot de passe fournis sont corrects. Des guides d'installation rapide et manuels du produit en d'autres langues sont sur le site www.dlink.com Pour tlcharger la dernire version du microprogramme, veuillez vous rendre sur le site www.dlink.com ASSISTANCE TECHNIQUE Assistance technique D-Link sur internet: http://www.dlink.com Assistance technique D-Link par tlphone : 01 76 54 84 17 Du lundi au vendredi de 9h 19h (hors jours fris) 12 GO-RT-AC750FRANAIS CONTENIDO DEL PAQUETE CONTENIDO WIRELESS AC 750 DUAL-BAND EASY ROUTER GO-RT-AC750 ADAPTADOR DE ALIMENTACIN 5V / 1A CABLE ETHERNET (CAT5 UTP) CONECTE EL ROUTER AL PC DURANTE LA INSTALACIN Nota de configuracin Wi-Fi NOTA DE CONFIGURACIN WI-FI CONTIENE LA INFORMACIN DE WI-FI PREDETERMINADA Si falta cualquiera de estos componentes del paquete, pngase en contacto con el proveedor. 13 GO-RT-AC750ESPAOL CONFIGURACIN DEL PRODUCTO CONFIGURACIN BASADA EN LA WEB PC Modem Router Modem Router PC Modem Router WELCOME TO THE D-LINK SETUP WIZARD Paso 1 Coloque el GO-RT-AC750 cerca del mdem y el PC conectados a Internet Mantenga el router en una zona abierta para conseguir una mejor cobertura inalmbrica. Paso 2 Desenchufe el cable Ethernet del mdem conectado al ordenador y enchfelo en el puerto que lleva la etiqueta INTERNET del router. Conecte el adaptador de alimentacin suministrado al router y a una toma de alimentacin y, a continuacin compruebe que el LED est encendido. Paso 3 Enchufe un extremo del cable Ethernet suministrado en el puerto que lleva la etiqueta 1 en la parte posterior del router y el otro extremo en el puerto Ethernet del ordenador. Para configurar el GO-RT-AC750 a travs de Wi-Fi, vaya a los parmetros Wi-Fi del ordenador o del dispositivo mvil y seleccione la red (ejemplo: dlink-A8FA). Introduzca la contrasea de Wi-Fi
(ejemplo: akbdj19368) en la Nota de configuracin Wi-Fi incluida. Paso 4 Abra un explorador en el ordenador conectado. Si el sistema no le dirige automticamente al Asistente de configuracin D-Link, vaya a http://dlinkrouter.local./ y siga las instrucciones que aparecen en pantalla para configurar el GO-RT-AC750. Utilice Admin como nombre de usuario y deje la contrasea en blanco para configurarla manualmente. 14 GO-RT-AC750ESPAOL SOLUCIN DE PROBLEMAS PROBLEMAS DE INSTALACIN Y CONFIGURACIN 1. CMO DEBO CONFIGURAR MI ROUTER GO-RT-AC750 MANUALMENTE?
- Conecte el PC al router con un cable Ethernet.
- Abra un explorador web e introduzca la direccin http://dlinkrouter.local./ (o 192.168.0.1).
- El nombre de usuario predeterminado es Admin. La contrasea se debe dejar en blanco de forma predeterminada.
- Si ha cambiado la contrasea y no puede recordarla, necesitar reiniciar el router para volver a un campo de contrasea vaco. 2. CMO PUEDO REINICIAR MI ROUTER GO-RT-AC750 EN LOS PARMETROS PREDETERMINADOS DE FBRICA?
- Compruebe que el router est encendido.
- Pulse y mantenga pulsado durante 10 segundos el botn de reinicio en la parte inferior del dispositivo. Nota: al restablecer la configuracin predeterminada, se borrarn los ajustes de configuracin actuales. Para reconfigurar los ajustes, acceda al router tal como se describe en la pregunta 1; a continuacin, ejecute el asistente de configuracin. 3. CMO PUEDO AGREGAR UN NUEVO CLIENTE O PC INALMBRICO SI HE OLVIDADO MI NOMBRE WI-FI (SSID) O LA CONTRASEA WI-FI?
- Para cada uno de los PC que necesite conectar de forma inalmbrica al router, es necesario que se asegure de utilizar el nombre de Wi-Fi (SSID) y la contrasea de Wi-Fi correctos.
- Utilice la interfaz de usuario basada en Web (como se describe en la pregunta 1 anterior) para consultar o elegir su configuracin inalmbrica.
- Asegrese de anotar estos parmetros, de forma que pueda introducirlos para cada PC conectado de forma inalmbrica. La contraportada de este documento incorpora una zona para registrar esta informacin importante. 4. POR QU NO CONSIGO CONECTARME A INTERNET?
Para los usuarios de ADSL, pngase en contacto con su ISP para confirmar que ha activado/
conectado el servicio y que su nombre de usuario y contrasea de ISP son correctos. Para obtener la gua de instalacin rpida y el manual completo del producto en otros idiomas, consulte el sitio web www.dlink.com Para descargar el ltimo firmware, consulte el sitio web www.dlink.com ASISTENCIA TCNICA http://www.dlink.com Asistencia Tcnica Telefnica de D-Link: +34 902 30 45 45 0,067 /min De Lunes a Viernes de 9:00 a 19:00 15 GO-RT-AC750ESPAOL CONTENUTO DELLA CONFEZIONE SOMMARIO WIRELESS AC 750 DUAL-BAND EASY ROUTER GO-RT-AC750 ALIMENTATORE 5V / 1A CAVO ETHERNET (UTP CAT5) CONSENTE DI COLLEGARE IL ROUTER AL PC DURANTE LA CONFIGURAZIONE Nota sulla configurazione Wi-Fi NOTA SULLA CONFIGURAZIONE WI-FI CONTIENE INFORMAZIONI SULLA IMPOSTAZIONI WI-FI PREDEFINITE Se uno di questi articoli non sono inclusi nella confezione, rivolgersi al rivenditore. 16 GO-RT-AC750ITALIANO CONFIGURAZIONE DEL PRODOTTO CONFIGURAZIONE BASATA SUL WEB PC Modem Router Modem Router PC Modem Router WELCOME TO THE D-LINK SETUP WIZARD Passaggio 1 Posizionare il dispositivo GO-RT-AC750 accanto al modem e al PC connessi a Internet. Per una migliore copertura wireless, sistemare il router in un'area priva di ostacoli. Passaggio 2 Scollegare il cavo Ethernet del modem collegato al computer e collegarlo alla porta INTERNET del router. Collegare l'alimentatore in dotazione al router e a una presa elettrica, quindi verificare che il LED di alimentazione sia acceso. Passaggio 3 Collegare un'estremit del cavo Ethernet in dotazione alla porta 1 sul retro del router e l'altra estremit alla porta Ethernet del computer. Per configurare il dispositivo GO-RT-AC750 tramite Wi-Fi, passare alle impostazioni Wi-Fi del computer o del dispositivo mobile e selezionare la rete, ad esempio dlink-A8FA. Immettere la password della rete Wi-Fi, ad esempio akbdj19368, riportata nella nota sulla configurazione Wi-Fi inclusa. Passaggio 4 Aprire un browser nel computer connesso. Se non si viene automaticamente reindirizzati alla pagina della Configurazione guidata D-Link, accedere alla pagina all'indirizzo http://dlinkrouter.local./ e attenersi alle istruzioni visualizzate per configurare il dispositivo GO-RT-AC750. Utilizzare Admin come nome utente e lasciare vuoto il campo della password per eseguire la configurazione manuale. 17 GO-RT-AC750ITALIANO RISOLUZIONE DEI PROBLEMI PROBLEMI DI INSTALLAZIONE E CONFIGURAZIONE 1. COME POSSIBILE CONFIGURARE IL ROUTER GO-RT-AC750 MANUALMENTE?
- Collegare il PC al router utilizzando un cavo Ethernet.
- Aprire un browser Web e immettere l'indirizzo http://dlinkrouter.local./ (oppure 192.168.0.1).
- Il nome utente predefinito Admin. Per impostazione predefinita il campo della password deve essere lasciato vuoto.
- Se la password stata modificata e non si riesce a ricordarla, sar necessario ripristinare il router in modo da reimpostare la password su un campo vuoto. 2. COME POSSIBILE RIPRISTINARE LE IMPOSTAZIONI PREDEFINITE DEL ROUTER GO-RT-AC750?
- Assicurarsi che il router sia acceso.
- Premere e tenere premuto il pulsante di ripristino nella parte inferiore del dispositivo per 10 secondi. Nota: il ripristino delle impostazioni predefinite del router comporter la cancellazione delle attuali impostazioni di configurazione. Per configurare nuovamente le impostazioni accedere al router come descritto alla domanda 1, quindi avviare la Configurazione guidata. 3. COME POSSIBILE AGGIUNGERE UN NUOVO CLIENT O PC WIRELESS SE SI DIMENTICATO IL NOME DELLA RETE WI-FI (SSID) O LA PASSWORD WI-FI?
- necessario verificare che per ogni PC da connettere al router in modalit wireless vengano utilizzati il nome della rete WI-FI (SSID) e la password Wi-Fi corretti.
- Utilizzare l'interfaccia utente basata sul Web (descritta nella risposta alla domanda 1) per verificare o selezionare le impostazioni wireless.
- Assicurarsi di prendere nota di queste impostazioni in modo da poterle immettere in ogni PC connesso alla rete wireless. Nel retro di questo documento disponibile un'area in cui annotare queste importanti informazioni. 4. PERCH LA CONNESSIONE INTERNET NON DISPONIBILE?
Gli utenti della linea ADSL devono invece contattare l'ISP per verificare l'attivazione/connessione del servizio e la correttezza del nome utente e della password assegnata. Per la Guida di installazione rapida e il manuale completo del prodotto in altre lingue, visitare il sito Web www.dlink.com. Per scaricare la versione pi recente del firmware, visitare il sito Web all'indirizzo www.dlink.com SUPPORTO TECNICO http://www.dlink.com Supporto Tecnico dal luned al venerd dalle ore 9.00 alle ore 19.00 con orario continuato Telefono: 02 87366396 18 GO-RT-AC750ITALIANO ZAWARTO OPAKOWANIA SPIS TRECI WIRELESS AC 750 DUAL-BAND EASY ROUTER GO-RT-AC750 ZASILACZ SIECIOWY 5V / 1A KABEL ETHERNET (CAT5 UTP) W CZASIE INSTALACJI NALEY PODCZY ROUTER DO KOMPUTERA Informacja o konfiguracji Wi-Fi INFORMACJA O KONFIGURACJI WI-FI ZAWIERA DOMYLNE INFORMACJE O CZU WI-FI Jeli w opakowaniu brakuje ktregokolwiek z tych elementw, skontaktuj si ze sprzedawc. 19 GO-RT-AC750POLSKI INSTALACJA PRODUKTU KONFIGURACJA SIECIOWA PC Modem Router Modem Router PC Modem Router WELCOME TO THE D-LINK SETUP WIZARD Krok 1 Ustawi router GO-RT-AC750 obok podczonego do Internetu modemu i komputera. Ustawi router na otwartej przestrzeni w celu uzyskania lepszego zasigu bezprzewodowego. Krok 2 Odczy kabel Ethernet modemu od komputera i podczy go do portu na routerze oznaczonego INTERNET. Podczy do routera i do gniazdka zasilania dostarczony zasilacz sieciowy i upewni si, e dioda LED si wieci. Krok 3 Podczy jeden koniec dostarczonego kabla Ethernet do portu oznaczonego 1 z tyu routera, a drugi koniec na portu Ethernet w komputerze. Aby zainstalowa router GO-RT-AC750 przez sie Wi-Fi, naley znale na swoim komputerze lub urzdzeniu przenonym ustawienia sieci Wi-Fi i wybra sie (np. dlink-A8FA). WPROWADZI HASO DO WI-FI (np. akbdj19368) w zaczonej Informacji o konfiguracji Wi-Fi. Krok 4 Otworzy przegldark na komputerze podczonym do Internetu. Jeli nie nastpi automatyczne przekierowanie do Kreatora instalacji D-Link, naley przej na stron http://dlinkrouter.local./ i postpowa zgodnie z wywietlanymi instrukcjami w celu konfiguracji routera GO-RT-AC750. Uy Admin jako nazwy uytkownika, a pole hasa pozostawi puste, aby przeprowadzi rczn konfiguracj. 20 GO-RT-AC750POLSKI ROZWIZYWANIE PROBLEMW PROBLEMY Z INSTALACJ I KONFIGURACJ 1. JAK RCZNIE SKONFIGUROWA ROUTER GO-RT-AC750?
- Podczy komputer PC do routera, uywajc kabla Ethernet.
- Uruchomi przegldark internetow i wpisa adres http://dlinkrouter.local./ (lub 192.168.0.1).
- Domylna nazwa uytkownika to Admin. Domylnie pole hasa powinno pozosta puste.
- Jeli uytkownik zmieni haso i nie potrafi go odtworzy, naley zresetowa router w celu powrotu do pustego pola hasa. 2. JAK ZRESETOWA ROUTER GO-RT-AC750 DO DOMYLNYCH USTAWIE FABRYCZNYCH?
- Upewni si, e router jest podczony do zasilania.
- Nacisn i przytrzyma przez 10 sekund znajdujcy si z tyu urzdzenia przycisk reset. Uwagi: Zresetowanie routera do domylnych ustawie fabrycznych usunie obecn konfiguracj ustawie. Aby ponownie skonfigurowa ustawienia, naley zalogowa si do routera w sposb opisany w pytaniu 1, nastpnie uruchomi Kreator instalacji. 3. JAK DODA NOWY KOMPUTER LUB BEZPRZEWODOWEGO KLIENTA, JELI NIE PAMITAM NAZWY (SSID) LUB HASA SIECI WI-FI?
- Upewni si, e na kadym komputerze, ktry ma by bezprzewodowo podczony do routera, uywane s prawidowe nazwa (SSID) i haso sieci Wi-Fi.
- Uy sieciowego interfejsu uytkownika (jak w pytaniu 1 powyej), aby sprawdzi lub wybra ustawienia sieci bezprzewodowej.
- Upewni si, e ustawienia zostay zapisane, tak by moliwe byo pniejsze ich wprowadzenie do kadego bezprzewodowo podczonego komputera. Na drugiej stronie tego dokumentu znajduje si specjalne miejsce, w ktrym mona zapisa te wane informacje. 4. DLACZEGO NIE MOG POCZY SI Z INTERNETEM?
W przypadku uytkownikw ADSL: prosz skontaktowa si z dostawc usug internetowych, aby upewni si, e ta usuga zostaa wczona/podczona przez dostawc usug internetowych oraz e nazwa uytkownika i haso przydzielone przez dostawc s waciwe. Aby pobra skrcon instrukcj obsugi oraz kompletny podrcznik uytkownika w innym jzyku, odwied stron www.dlink.com Aby pobra najnowsze oprogramowanie ukadowe, patrz strona internetowa www.dlink.com POMOC TECHNICZNA Telefoniczna pomoc techniczna firmy D-Link: 0 801 022 021 Pomoc techniczna firmy D-Link wiadczona przez Internet:
http://www.dlink.com 21 GO-RT-AC750POLSKI OBSAH BALEN OBSAH WIRELESS AC 750 DUAL-BAND EASY ROUTER GO-RT-AC750 NAPJEC ADAPTR 5V / 1A ETHERNETOV KABEL (CAT5 UTP) PI NASTAVEN PIPOJTE SMROVA KE SVMU PC Konfigurace st Wi-Fi LIST S KONFIGURAC ST WI-FI OBSAHUJE VCHOZ KONFIGURACI ST WI-FI Pokud nkter z uvedench poloek v balen chyb, kontaktujte prosm svho prodejce. 22 GO-RT-AC750ESKY NASTAVEN VROBKU WEBOV NASTAVEN PC Modem Router Modem Router PC Modem Router WELCOME TO THE D-LINK SETUP WIZARD Krok 1 Umstte smrova GO-RT-AC750 pobl potae a modemu pipojenho k internetu. Chcete-li doshnout lepho pokryt bezdrtovm signlem, umstte smrova do otevenho prostoru. Krok 2 Odpojte od potae ethernetov kabel, kterm je pipojen modem, a zapojte jej do portu s oznaenm INTERNET na smrovai. Pibalen napjec adaptr pipojte ke smrovai a zapojte do elektrick zsuvky. Pot ovte, zda svt kontrolka napjen. Krok 3 Zapojte jeden konec pibalenho ethernetovho kabelu do portu s oznaenm 1 na zadn stran smrovae a druh konec do ethernetovho portu potae. Chcete-li smrova GO-RT-AC750 nastavit prostednictvm st Wi-
Fi, v konfiguraci pipojen Wi-Fi v potai nebo mobilnm pstroji vyberte s (nap. dlink-A8FA). Zadejte heslo st Wi-Fi (nap. akbdj19368) uveden na piloenm listu s konfigurac st Wi-Fi. Krok 4 Na pipojenm potai otevete prohle. Pokud nebudete automaticky pesmrovni na strnku prvodce nastavenm D-Link, pejdte na http://dlinkrouter.local./ a podle pokyn na obrazovce nakonfigurujte svj smrova GO-RT-AC750. Pi run konfiguraci pouijte uivatelsk jmno Admin a heslo nechejte przdn. 23 GO-RT-AC750ESKY EEN PROBLM PROBLMY S INSTALAC A KONFIGURAC 1. JAK NAKONFIGURUJI SMROVA GO-RT-AC750 RUN?
- Pipojte svj pota ethernetovm kabelem ke smrovai.
- Otevete webov prohle a zadejte adresu http://dlinkrouter.local./ (nebo 192.168.0.1).
- Vchoz uivatelsk jmno je Admin. Heslo by standardn mlo bt przdn.
- Jestlie jste heslo zmnili a nepamatujete si jej, muste smrova vyresetovat, aby se heslo opt vymazalo. 2. JAK OBNOVM VCHOZ TOVRN NASTAVEN SMROVAE GO-RT-AC750?
- Ujistte se, e je smrova zapnut.
- Stisknte a 10 sekund podrte resetovac tlatko na spodn stran zazen. Poznmka: Obnovenm tovrnho nastaven smrovae se vymae aktuln nastaven konfigurace. Chcete-li nastaven znovu zkonfigurovat, pihlaste se ke smrovai podle postupu uvedenho v otzce 1 a spuste prvodce nastavenm. 3. JAK PIDM DALHO BEZDRTOVHO KLIENTA NEBO PC, KDY SI NEPAMATUJI NZEV ST WI-FI (SSID) NEBO HESLO?
- Na kadm PC, kter je teba bezdrtov pipojit ke smrovai, muste pout sprvn nzev st Wi-Fi (SSID) a jej heslo.
- Pomoc webovho uivatelskho rozhran (viz otzka 1 ve) zkontrolujte a ppadn zmte nastaven bezdrtov st.
- Nezapomete si tato nastaven zapsat, abyste je mohli zadat na kadm bezdrtov pipojenm PC. Na zadn stran tto pruky najdete msto pro poznamenn tchto dleitch informac. 4. PRO SE NEMOHU PIPOJIT K INTERNETU?
Uivatel ADSL by se mli obrtit na svho poskytovatele pipojen k internetu a ujistit se, e sluba byla poskytovatelem povolena/zapojena a zda je sprvn uivatelsk jmno a heslo. Informace o dalch jazycch QIG a pln nvod k produktu naleznete na webovch strnkch www.dlink.com Nejnovj firmware ke staen najdete na webu www.dlink.com TECHNICK PODPORA Web: http://www.dlink.com E-mail: support@dlink.cz Telefon R: +420 211 151 640 nebo SK: +421 (0)692 147 110 Telefonick podpora je v provozu: PO - P od 09:00 do 17:00 Voln je zpoplatnno dle pslunch tarif Vaeho opertora. 24 GO-RT-AC750ESKY A CSOMAG TARTALMA TARTALOM WIRELESS AC 750 DUAL-BAND EASY ROUTER GO-RT-AC750 TPADAPTER 5V / 1A ETHERNET KBEL (CAT5 UTP) CSATLAKOZTASSA A ROUTERT SZMTGPHEZ BELLTS KZBEN Wi-Fi konfigurcis megjegyzs WI-FI KONFIGURCIS MEGJEGYZS TARTALMAZZA AZ ALAPRTELMEZETT WI-FI INFORMCIKAT Ha ezen elemek brmelyike hinyzik a csomagolsbl, vegye fel a kapcsolatot viszonteladjval. 25 GO-RT-AC750MAGYAR TERMKBELLTS WEB ALAP BELLTS PC Modem Router Modem Router PC Modem Router WELCOME TO THE D-LINK SETUP WIZARD 1. lps Helyezze a GO-RT-AC750-t az internetkapcsolattal rendelkez modem s szmtgp kzelbe. A jobb vezetk nlkli lefedettsgrt tartsa a routert nyitott terleten. 2. lps Hzza ki a szmtgphez csatlakoztatott modem Ethernet kbelt, majd csatlakoztassa a router INTERNET portjba. Csatlakoztassa a csomagolsban tallhat tpadaptert a routerbe s egy fali aljzatba, majd ellenrizze, hogy a tp-jelzfny vilgt-e. 3. lps Csatlakoztassa a mellkelt Ethernet kbel egyik vgt a router htuljn lv 1-es portba, a msik vgt pedig a szmtgpn lv Ethernet portba. A GO-RT-AC750 Wi-Fi-n keresztli belltshoz menjen a szmtgp vagy a mobil eszkz Wi-Fi belltsaihoz, majd vlassza ki a hlzatot (pl.: dlink-A8FA). rja be a Wi-Fi jelszt (pl.:
akbdj19368) - ez a mellkelt Wi-Fi konfigurcis megjegyzsen szerepel. 4. lps A csatlakoztatott szmtgpen nyisson meg egy bngszt. Amennyiben nem kerl automatikusan a D-Link Telept varzslra, menjen a http://dlinkrouter.local./ oldalra s kvesse a kpernyn megjelen utastsokat a GO-RT-AC750 konfigurlshoz. Hasznlja az Admin szt felhasznlnvnek, a jelsz mezt pedig hagyja resen a manulis konfigurlshoz. 26 GO-RT-AC750MAGYAR HIBAELHRTS BELLTSI S KONFIGURCIS PROBLMK 1. HOGYAN KONFIGURLJAM A GO-RT-AC750 ROUTEREMET MANULISAN?
- Csatlakoztassa szmtgpt a routerhez Ethernet kbel segtsgvel.
- Nyisson meg egy webbngszt s rja be a http://dlinkrouter.local./ (vagy 192.168.0.1) cmet.
- Az alaprtelmezett felhasznlnv az Admin. Alaprtelmezettknt a jelsz mezt resen kell hagynia.
- Ha megvltoztatta a jelszt s nem emlkszik r, akkor vissza kell lltania a routert az res jelsz mezhz val visszatrshez. 2. HOGYAN LLTHATOM VISSZA A GO-RT-AC750 ROUTEREMET ALAPRTELMEZETT GYRI BELLTSOKRA?
- Gyzdjn meg arrl, hogy a router be van kapcsolva.
- Nyomja be, s tartsa benyomva az eszkz aljn lv reset gombot 10 msodpercig. Megjegyzs: A router alaprtelmezett gyri belltsainak visszalltsa trli a jelenlegi konfigurcis belltst. A belltsok jrakonfigurlshoz lpjen be a router weboldalra az els krdsben lertak alapjn, majd futtassa a Telept varzslt. 3. HOGYAN ADHATOK HOZZ EGY J VEZETK NLKLI KLIENST VAGY SZMTGPET, HA ELFELEJTETTEM A WI-FI NEVT (SSID) VAGY JELSZAVT?
- Minden, a routerhez vezetk nlkl kapcsold szmtgp esetn szksge lesz a helyes Wi-
Fi nvre (SSID) s Wi-Fi jelszra.
- Hasznlja a webes felhasznli felletet (az 1. krdsben lertak alapjn) a vezetk nlkli belltsok ellenrzshez vagy kivlasztshoz.
- Bizonyosodjon meg arrl, hogy lerta ezeket a belltsokat, gy a ksbbiek sorn minden vezetk nlkl kapcsold szmtgp esetn meg tudja azokat adni. A dokumentum htoldaln tallhat terleten rgztheti az ezen fontos informcikat. 4. MIRT NEM TUDOK CSATLAKOZNI AZ INTERNETRE?
ADSL felhasznlk esetn krjk, lpjenek kapcsolatba az Internetszolgltatval annak ellenrzse rdekben, hogy a szolgltats engedlyezett/csatlakoztatva van-e a szolgltat ltal, valamint a szolgltat felhasznlneve s jelszava helyes-e. Ms nyelv Gyors teleptsi tmutatrt s a teljes termkkziknyvrt ltogasson el a www.dlink.com weboldalra. A legjabb firmware letltshez krjk, hivatkozzon a weboldalra www.dlink.com TECHNIKAI TMOGATS URL : http://www.dlink.com Tel. : 06 80 315-465 Ingyenes zld szm 27 GO-RT-AC750MAGYAR FCC Statement:
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor environment only. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC Statement:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two condi tions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the 28 GO-RT-AC750 device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. Pour les produits disponibles aux tats-Unis / Canada du march, seul le canal 1 11 peuvent tre exploits. Slection dautres canaux nest pas possible. This device and its antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas tre co-localiss ou fonctionnement en association avec une autre antenne ou transmetteur. The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. 29 GO-RT-AC750 NOTES 30 GO-RT-AC750 NOTES 31 GO-RT-AC750 TECHNICAL SUPPORTWorldwide www.dlink.comVer. 2.00(EU)_130x183 2014/11/14 WIRELESS NETWORK REMINDERWireless Network Name (SSID)Wireless Network Password
1 2 | Label and label location | ID Label/Location Info | 559.08 KiB |
for printing outline dimension 8.6mm 5.2mm 6mm 6mm Title: DIR-803 Device Label Drawn by: Joan Huang Date: 2014/7/1 Material: 50(PET) Glossy White Polyester Film Part No.: 9700000431DLG Rev.:
Task ID: 4444 Checked by: Lush Lin Date: 2014/7/1 Coated: 25(PET) Matte Clear Polyester Film Unit: mm Cutting and Printing Tolerance: 0.15mm Contents Tolerance: 0.25mm Approved by: Lush Lin Date: 2014/7/1 Adhesive: Acrylic Scale: 1:1 Modied drawing Original drawing Colors:
Black White Background Texts and logos
1 2 | Authorization Letter | Cover Letter(s) | 185.32 KiB |
oe
D-Link No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C September 28, 2008 Power of Attorney To whom it may concern
|, the undersigned, Michael Boschma, hereby authorize the persons listed below to act in behalf of me to sign all related documents for D-Links FCC application. Wireless Shinglin Chung/Senior manager Broad Band Jacob Luo/Senior Director
+886-2-66000123#5819 +886-2-66000123#6810 shinglin_chung@alink.com.tw jacob_luo@dlink.com.tw Digital home Robert Lin/Senior Director Switch & Henghsin Liao/Associate Vice President
+886-2-66000123#5720 security product +886-2-66000123#5810 robert_lin@dlink.com.tw henghsin_liao@dlink.com.tw Company Name: D-Link Co. Ltd Fax: 886-2-55509988 Company Address: No.289,Sinhu 3" Rd.,Neihu District, Taipei City 114, Taiwan, R.O.C. Authorization period: Jan 1*', 2008 ~Dec 31%, 2058 Should you have any question regarding this power of attorney, please don't hesitate to contact me Sincerely, Much ash Peachrna 9-28-08 Michael Boschma D-Link Co. TEL: (714) 885-6000 FAX: (949) 272-4629 E-mail:Mboschma@dlink.com
1 2 | Declaration of authorization | Cover Letter(s) | 18.54 KiB |
RF_160, Issue 02 Declaration of Authorization We Name: D Link Corporation Address: 17595 Mt. Herrmann, City: Fountain Valley State: California Country: United States 92708 Declare that:
Name Representative of agent: Ms. Cathy Wang Agent Company name: BTL Inc. Address: No.3 Jinshagang 1st Road, Shixia, Dalang Town City: Dong Guan Country: China is authorized to apply for Certification and signing related documents of the following product(s), including 731 form(s):
Product description: Wireless AC750 Dual Band Router ;Wireless AC750 Dual Band Easy Router Type designation: DIR-803 ;GO-RT-AC750 Trademark: D-Link on our behalf. Date: 2014-10-27 Name: Shinglin Chung Function: Associate Vice President Co Signature: 020.0... errr teens Notes:
(1): Required for FCC application
(2): For FCC it must be the Grantee Code owner or the authorized agent.
1 2 | FCC DOC | Cover Letter(s) | 733.46 KiB |
CERTIFICATE OF COMPLIANCE Authorized under Declaration of Conformity according to 47 CFR, Part 2 and Part 15 of the FCC Rules. The product listed in follows was (were) tested in the BTL EMC Laboratory to comply with the criteria limits Class B of conducted and radiated emissions of the Technical Standards FCC Part 15, Subpart B, established by the FCC, USA. Equipment 1) Wireless AC750 Dual Band Router 2) Wireless AC750 Dual Band Easy Router Model Name 1) DIR-803 2) GO-RT-AC750 D-Link Corporation No.289, Sinhu 3rd Rd., Neihu District, Taipei City 114, Taiwan, R.O.C. Brand Name D-Link Applicant Address Standard(s) FCC Part 15, Subpart B: 2013 Report(s) The test data, data evaluation, and equipment configuration contained in our test report(s) above was(were) obtained utilizing the test procedures, test instruments, test sites that has been accredited by the Authority of TAF according to the ISO-17025 quality assessment standard and technical standard(s). The test data contained in the referenced test report relate only to the EUT sample and item(s) tested. ANSI C63.4-2009 ICES-003 Issue 5: 2012 BTL-FCCE-1-1408C111 Andy Chiu Authorized Signatory BTL INC. B1, No. 37, Lane 365, Yang-Guang St., Nei-Hu District, Taipei City 114, Taiwan. TEL:+886-2-2657-3299 FAX:+886-2-2657-3331
1 2 | Request for non-disclosure | Cover Letter(s) | 34.10 KiB |
FCC, Request for non-disclosure Date: 10-Aug-09 RF_501, Issue Page 1 of 1 Company Name: D Link Corporation Address: 17595 Mt. Herrmann, City: Fountain Valley,California Country: United States 92708 To: Telefication B.V., Dept. FCC TCB Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands Subject: Request for confidentiality FCC ID: KA2IR803B4 Reference number: ####HHt Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:
C1 Bill(s) of Material KX] Block Diagrams EX] Operational Description [x] Schematic Diagrams CJ Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):
C1 Internal Photos [] User's Manual CO Test Set-up Photos 1 External Photos Justification:
Planned Release Date STC: (notes 2, 3, 4, 5)
| jo Date: 2014-10-20 Name and signature of applicant: Shinglin Chung Notes:
4) A document or type of document can only have ONE type of confidentiality!
2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.}!
3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!
5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2014-11-18 | 5745 ~ 5825 | DTS - Digital Transmission System | Original Equipment |
2 | 5180 ~ 5240 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2014-11-18
|
||||
1 2 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0007371172
|
||||
1 2 | Physical Address |
17595 Mt. Herrmann
|
||||
1 2 |
Fountain Valley, 92708
|
|||||
1 2 |
Fountain Valley, California 92708
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@telefication.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
KA2
|
||||
1 2 | Equipment Product Code |
IR803B1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B******** A******
|
||||
1 2 | Title |
General Counsel
|
||||
1 2 | Telephone Number |
714-8********
|
||||
1 2 | Fax Number |
866-7********
|
||||
1 2 |
b******@dlink.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
S****** L********
|
||||
1 2 | Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-76********
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
c******@newbtl.com
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
C******** W******
|
||||
1 2 | Physical Address |
No.3 Jinshagang 1st Rd, Shixia, Dalang
|
||||
1 2 |
China
|
|||||
1 2 | Telephone Number |
86-76********
|
||||
1 2 | Fax Number |
86-76********
|
||||
1 2 |
c******@newbtl.com
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless AC750 Dual Band Router/Wireless AC750 Dual Band Easy Router | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5775 MHz. | ||||
1 2 | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz MHz. Operations in 5150-5250 MHz band is for indoor use only. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
BTL Inc.
|
||||
1 2 | Name |
D**** D******
|
||||
1 2 | Telephone Number |
00867******** Extension:
|
||||
1 2 | Fax Number |
0086 ********
|
||||
1 2 |
d******@btl.org.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC MO | 2412 | 2462 | 0.99 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15C | CC MO | 5745 | 5825 | 0.24 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | CC MO | 5180.00000000 | 5240.00000000 | 0.2400000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC