all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
USERS MANUAL | Users Manual | 2.51 MiB | July 13 2007 | |||
1 |
|
INTERNAL PHOTOS | Internal Photos | 462.71 KiB | July 13 2007 | |||
1 |
|
EXTERNAL PHOTOS | External Photos | 105.59 KiB | July 13 2007 | |||
1 |
|
LABEL LOCATION | ID Label/Location Info | 51.73 KiB | July 13 2007 | |||
1 |
|
ATTESTATION STATEMENT | Attestation Statements | 40.36 KiB | July 13 2007 | |||
1 |
|
BLOCK DIAGRAM | Block Diagram | 84.43 KiB | July 13 2007 | |||
1 |
|
OPERATIONAL DESCRIPTION | Operational Description | 38.12 KiB | July 13 2007 | |||
1 | RF Exposure Info | July 13 2007 | ||||||
1 |
|
SCHEMATICS | Schematics | 1.15 MiB | July 13 2007 | |||
1 | Test Report | July 13 2007 | ||||||
1 | Test Setup Photos | July 13 2007 |
1 | USERS MANUAL | Users Manual | 2.51 MiB | July 13 2007 |
Networking Basics Naming your Computer To name your computer, please follow these directions:In Windows XP:
Click Start (in the lower left corner of the screen) Right-click on My Computer Select Properties and click Select the Computer Name Tab in the System Properties window. You may enter a Computer Description if you wish; this eld is optional. To rename the computer and join a domain, Click Change. 47 Networking Basics Naming your Computer In this window, enter the Computer name Select Workgroup and enter the name of the Workgroup All computers on your network must have the same Workgroup name. Click OK Checking the IP Address in Windows XP The wireless adapter-equipped computers in your network must be in the same IP Ad-
dress range (see Getting Started in this manual for a denition of IP Address Range.) To check on the IP Address of the adapter, please do the following:
Right-click on the Local Area Connection icon in the task bar Click on Status 48 Networking Basics Checking the IP Address in Windows XP This window will appear. Click the Support tab Click Close Assigning a Static IP Address in Windows XP/2000 Note: Residential Gateways/Broadband Routers will automatically assign IP Addresses to the computers on the network, using DHCP (Dynamic Host Conguration Protocol) technology. If you are using a DHCP-capable Gateway/Router you will not need to assign Static IP Addresses. If you are not using a DHCP capable Gateway/Router, or you need to assign a Static IP Address, please follow these instructions:
Go to Start Double-click on Control Panel 49 Networking Basics Assigning a Static IP Address in Windows XP/2000 Double-click on Network Connections Right-click on Local Area Connections Double-click on Properties 50 Networking Basics Assigning a Static IP Address in Windows XP/2000 Click on Internet Protocol
(TCP/IP) Click Properties Input your IP address and subnet mask. (The IP Addresses on your network must be within the same range. For example, if one computer has an IP Address of 192.168.0.2, the other computers should have IP Addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.) Input your DNS server addresses. (Note: If you are entering a DNS server, you must enter the IP Address of the Default Gateway.) The DNS server information will be supplied by your ISP (Internet Service Provider.) Click OK 51 Networking Basics Assigning a Static IP Address with Macintosh OSX Go to the Apple Menu and select System Preferences cClick on Network Select Built-in Ethernet in the Show pull-down menu Select Manually in the Congure pull-down menu Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate elds Click Apply Now 52 Networking Basics Selecting a Dynamic IP Address with Macintosh OSX Go to the Apple Menu and select System Preferences Click on Network Select Built-in Ethernet in the Show pull-down menu Select Using DHCP in the Congure pull-down menu Click Apply Now The IP Address, Subnet mask, and the Routers IP Address will appear in a few seconds 53 Networking Basics Checking the Wireless Connection by Pinging in Windows XP and 2000 Go to Start > Run >
type cmd. A window similar to this one will appear. Type ping xxx.xxx.xxx. xxx, where xxx is the IP Address of the Wireless Router or Access Point. A good wireless connection will show four replies from the Wireless Router or Acess Point, as shown. Checking the Wireless Connection by Pinging in Windows Me and 98 Go to Start > Run
> type command. A window similar to this will appear. Type ping xxx.xxx. xxx.xxx where xxx is the IP Address of the Wireless Router or Access Point. A good wireless connection will show four replies from the wireless router or access point, as shown. 54 Troubleshooting This Chapter provides solutions to problems that can occur during the installation and operation of the DI-524 Wireless Broadband Router. We cover various aspects of the network setup, including the network adapters. Please read the following if you are having problems. Note: It is recommended that you use an Ethernet connection to congure the DI-524 Wireless Broadband Router. 1. The computer used to congure the DI-524 cannot access the Conguration menu. Check that the Ethernet LED on the DI-524 is ON. If the LED is not ON, check that the cable for the Ethernet connection is securely inserted. Check that the Ethernet Adapter is working properly. Please see item 3 (Check that the drivers for the network adapters are installed properly) in this Troubleshooting section to check that the drivers are loaded properly. Check that the IP Address is in the same range and subnet as the DI-524. Please see Checking the IP Address in Windows XP in the Networking Basics section of this manual. Note: The IP Address of the DI-524 is 192.168.0.1. All the computers on the network must have a unique IP Address in the same range, e.g., 192.168.0.x. Any computers that have identical IP Addresses will not be visible on the network. They must all have the same subnet mask, e.g., 255.255.255.0 Do a Ping test to make sure that the DI-524 is responding. Go to Start>Run>Type Command>Type ping 192.168.0.1. A successful ping will show four replies. Note: If you have changed the default IP Address, make sure to ping the correct IP Ad-
dress assigned to the DI-524. 55 Troubleshooting 2. The wireless client cannot access the Internet in the Infrastructure mode. Make sure the wireless client is associated and joined with the correct Access Point. To check this connection: Right-click on the Local Area Connection icon in the taskbar> select View Available Wireless Networks. The Connect to Wireless Network screen will appear. Please make sure you have selected the correct available network, as shown in the illustrations below. Check that the IP Address assigned to the wireless adapter is within the same IP Address range as the access point and gateway. (Since the DI-524 has an IP Address of 192.168.0.1, wireless adapters must have an IP Address in the same range, e.g., 192.168.0.x. Each device must have a unique IP Address; no two devices may have the same IP Address. The subnet mask must be the same for all the computers on the network.) To check the IP Address assigned to the wireless adapter, double-click on the Local Area Connection icon in the taskbar >
select the Support tab and the IP Address will be displayed. (Please refer to Checking the IP Address in the Networking Basics section of this manual.) If it is necessary to assign a Static IP Address to the wireless adapter, please refer to the appropriate section in Networking Basics. If you are entering a DNS Server address you must also enter the Default Gateway Address. (Remember that if you have a DHCP-capable router, you will not need to assign a Static IP Address. See Networking Basics: Assigning a Static IP Address.) 56 Troubleshooting 3. Check that the drivers for the network adapters are installed properly. You may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using. Go to Start >
My Computer >
Properties Select the Hardware Tab Click Device Manager 57 Troubleshooting Double-click on Network Adapters Right-click on D-Link AirPlus DWL-G650 Wireless Cardbus Adapter (In this example we use the DWL-G650;
you may be using other network adapters, but the procedure will remain the same.) Select Proper-
ties to check that the drivers are installed properly Look under Device Status to check that the device is working properly Click OK D-Link AirPlus DWL-G650 D-Link AirPlus DWL-G650 Wireless Cardbus Adapter D-Link AirPlus DWL-G650 Wireless Cardbus Adapter 58 Troubleshooting 4. What variables may cause my wireless products to lose reception?
D-Link products let you access your network from virtually anywhere you want. However, the positioning of the products within your environment will affect the wireless range. Please refer to Installation Considerations in the Wireless Basics section of this manual for further information about the most advantageous placement of your D-Link wireless products. 5. Why does my wireless connection keep dropping?
Antenna Orientation- Try different antenna orientations for the DI-524. Try to keep the antenna at least 6 inches away from the wall or other objects. If you are using 2.4GHz cordless phones, X-10 equipment or other home security systems, ceiling fans, and lights, your wireless connection will degrade dramatically or drop altogether. Try changing the Channel on your Router, Access Point and Wireless adapter to a different Channel to avoid interference. Keep your product away (at least 3-6 feet) from electrical devices that generate RF noise, like microwaves, Monitors, electric motors, etc. 6. Why cant I get a wireless connection?
If you have enabled Encryption on the DI-524, you must also enable encryption on all wireless clients in order to establish a wireless connection. For 802.11b, the Encryption settings are: 64, 128, or 256 bit. Make sure that the encryption bit level is the same on the Router and the Wireless Client. Make sure that the SSID on the Router and the Wireless Client are exactly the same. If they are not, wireless connection will not be established. Move the DI-524 and the wireless client into the same room and then test the wireless connection. Disable all security settings. (WEP, MAC Address Control) 59 Troubleshooting 6. Why cant I get a wireless connection? (continued) Turn off your DI-524 and the client. Turn the DI-524 back on again, and then turn on the client. Make sure that all devices are set to Infrastructure mode. Check that the LED indicators are indicating normal activity. If not, check that the AC power and Ethernet cables are rmly connected. Check that the IP Address, subnet mask, gateway and DNS settings are cor-
rectly entered for the network. If you are using 2.4GHz cordless phones, X-10 equipment or other home se-
curity systems, ceiling fans, and lights, your wireless connection will degrade dramatically or drop altogether. Try changing the Channel on your DI-524, and on all the devices in your network to avoid interference. Keep your product away (at least 3-6 feet) from electrical devices that generate RF noise, like microwaves, Monitors, electric motors, etc. 7. I forgot my encryption key. Reset the DI-524 to its factory default settings and restore the other devices on your network to their default settings. You may do this by pressing the Reset button on the back of the unit. You will lose the current conguration settings. 60 Troubleshooting 8. Resetting the DI-524 to Factory Default Settings After you have tried other methods for troubleshooting your network, you may choose to Reset the DI-524 to the factory default settings. Remember that D-Link AirPro products network together, out of the box, at the factory default settings. Reset To hard-reset the DI-524 to Factory Default Settings, please do the following:
Locate the Reset button on the back of the DI-524 Use a paper clip to press the Reset button Hold for about 10 seconds and then release After the DI-524 reboots (this may take a few minutes) it will be reset to the factory Default settings 61 Technical Specications Standards IEEE 802.11g IEEE 802.11b IEEE 802.3 IEEE 802.3u VPN Pass Through/ Multi-Sessions PPTP L2TP IPSec Device Management Web-Based- Internet Explorer v6 or later; Netscape Navigator v7 or later; or other Java-enabled browsers DHCP Server and Client Advanced Firewall Features NAT with VPN Passthrough (Network Address Translation) MAC Filtering IP Filtering URL Filtering Domain Blocking Scheduling Wireless Operating Range Indoors up to 328 feet (100 meters) Outdoors up to 984 feet (300 meters) Operating Temperature 32F to 131F (0C to 55C) Humidity:
95% maximum (non-condensing) Safety and Emissions:
FCC, CE Wireless Frequency Range:
2.4GHz to 2.462GHz 62 Technical Specications LEDs:
Power WAN LAN (10/100) WLAN (Wireless Connection) Physical Dimensions:
L = 5.6 inches (142mm) W = 4.3 inches (109mm) H = 1.2 inches (31mm) Wireless Transmit Power:
Security:
14dBm 802.1x WEP WPA WPA-PSK External Antenna Type:
Single detachable reverse SMA Modulation Technology:
Orthogonal Frequency Division Multiplexing (OFDM) Power Input:
Ext. Power Supply DC 7.5V, 1.5A Weight:
0.44 lbs. (200g) Warranty:
1 year 63 Technical Specications Wireless Data Rates with Automatic Fallback:
54 Mbps 48 Mbps 36 Mbps 24 Mbps 18 Mbps 12 Mbps 11 Mbps 9 Mbps 6 Mbps 5.5 Mbps 2 Mbps 1 Mbps Receiver Sensitivity:
54Mbps OFDM, 10% PER, -68dBm 48Mbps OFDM, 10% PER, -68dBm 36Mbps OFDM, 10% PER, -75dBm 24Mbps OFDM, 10% PER, -79dBm 18Mbps OFDM, 10% PER, -82dBm 12Mbps OFDM, 10% PER, -84dBm 11Mbps CCK, 8% PER, -82dBm 9Mbps OFDM, 10% PER, -87dBm 6Mbps OFDM, 10% PER, -88dBm 5.5Mbps CCK, 8% PER, -85dBm 2Mbps QPSK, 8% PER, -86dBm 1Mbps BPSK, 8% PER, -89dBm 64 Frequently Asked Questions Why cant I access the web based conguration?
When entering the IP Address of the DI-524 (192.168.0.1), you are not connecting to the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. To resolve difculties accessing a web utility, please follow the steps below. Step 1 Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a different cable or connect to a different port on the device if possible. If the computer is turned off, the link light may not be on. What type of cable should I be using?
The following connections require a Crossover Cable:
Computer to Computer Computer to Uplink Port Computer to Access Point Computer to Print Server Computer/XBOX/PS2 to DWL-810 Computer/XBOX/PS2 to DWL-900AP+
Uplink Port to Uplink Port (hub/switch) Normal Port to Normal Port (hub/switch) The following connections require a Straight-through Cable:
Computer to Residential Gateway/Router Computer to Normal Port (hub/switch) Access Point to Normal Port (hub/switch) Print Server to Normal Port (hub/switch) Uplink Port to Normal Port (hub/switch) Rule of Thumb:
If there is a link light, the cable is right. 65 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) What type of cable should I be using? (continued) Whats the difference between a crossover cable and a straight-through cable?
The wiring in crossover and straight-through cables are different. The two types of cable have different purposes for different LAN congurations. EIA/TIA 568A/568B dene the wiring standards and allow for two different wiring color codes as illustrated in the following diagram.
*The wires with colored backgrounds may have white stripes and may be denoted that way in diagrams found elsewhere. How to tell straight-through cable from a crossover cable:
The main way to tell the difference between the two cable types is to compare the wiring order on the ends of the cable. If the wiring is the same on both sides, it is straight-through cable. If one side has opposite wiring, it is a crossover cable. All you need to remember to properly congure the cables is the pinout order of the two cable ends and the following rules:
A straight-through cable has identical ends A crossover cable has different ends It makes no functional difference which standard you follow for straight-through cable ends, as long as both ends are the same. You can start a crossover cable with either standard as long as the other end is the other standard. It makes no functional difference which end is which. The order in which you pin the cable is important. Using a pattern other than what is specied in the above diagram could cause connection problems. When to use a crossover cable and when to use a straight-through cable:
Computer to Computer Crossover Computer to an normal port on a Hub/Switch Straight-through Computer to an uplink port on a Hub/Switch - Crossover Hub/Switch uplink port to another Hub/Switch uplink port Crossover Hub/Switch uplink port to another Hub/Switch normal port - Straight-through 66 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) Step 2 Disable any Internet security software running on the computer. Software rewalls like Zone Alarm, Black Ice, Sygate, Norton Personal Firewall, etc. might block access to the conguration pages. Check the help les included with your rewall software for more information on disabling or conguring it. Step 3 Congure your Internet settings. Go to Start>Settings>Control Panel. Double click the Internet Options Icon. From the Security tab, click the button to restore the settings to their defaults. Click to the Connection tab and set the dial-
up option to Never Dial a Connection. Click the LAN Settings button Nothing should be checked. Click OK Go to the Advanced tab and click the button to restore these settings to their defaults Click OK. Go to the desktop and close any open windows 67 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) Step 4 Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to congure. Most D-Link devices use the 192.168.0.X range. How can I nd my IP Address in Windows 95, 98, or ME?
Step 1 Click on Start, then click on Run. Step 2 The Run Dialogue Box will appear. Type winipcfg in the window as shown then click OK. Step 3 The IP Conguration window will appear, displaying your Ethernet Adapter Information. Select your adapter from the drop down menu. If you do not see your adapter in the drop down menu, your adapter is not properly installed. Step 4 After selecting your adapter, it will display your IP Address, subnet mask, and default gateway. Step 5 Click OK to close the IP Conguration window 68 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to congure. Most D-Link devices use the 192.168.0.X range. How can I nd my IP Address in Windows 2000/XP?
Step 1 Click on Start and select Run. Step 2 Type cmd then click OK. Step 3 From the Command Prompt, enter ipcong. It will return your IP Address, subnet mask, and default gateway Step 4 Type exit to close the command prompt. 69 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) Step 4 (continued) Check your IP Address. Your computer must have an IP Address in the same range of the device you are attempting to congure. Most D-
Link devices use the 192.168.0.X range. Make sure you take note of your computers Default Gateway IP Address. The Default Gateway is the IP Address of the D-Link router. By default, it should be 192.168.0.1. How can I assign a Static IP Address in Windows XP?
Step 1 Click on Start > Control Panel > Network and Internet Connections >
Network connections. Step 2 See Step 2 for Windows 2000 and continue from there. How can I assign a Static IP Address in Windows 2000?
Step 1 Right-click on My Network Places and select Properties. Step 2 Right-click on the Local Area Connection which represents your network card and select Properties. Highlight Internet Protocol (TCP/
IP) and click Properties. 70 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) How can I assign a Static IP Address in Windows 2000? (continued) Click Use the following IP Address and enter an IP Address that is on the same subnet as the LAN IP Address on your router. Example: If the routers LAN IP Address is 192.168.0.1, make your IP Address 192.168.0.X where X = 2-99. Make sure that the number you choose is not in use on the network. Set the Default Gateway to be the same as the LAN IP Address of your router (192.168.0.1). Set the Primary DNS to be the same as the LAN IP address of your router
(192.168.0.1). The Secondary DNS is not needed or enter a DNS server from your ISP. Click OK twice. You may be asked if you want to reboot your computer. Click Yes. How can I assign a Static IP Address in Windows 98/Me?
Step 1 From the desktop, right-click on the Network Neigborhood icon (Win ME - My Network Places) and select Properties Highlight TCP/IP and click the Properties button. If you have more than 1 adapter, then there will be a TCP/IP Binding for each adapter. Highlight TCP/IP >
(your network adapter) and then click Properties. 71 Frequently Asked Questions (continued) Why cant I access the web based conguration? (continued) How can I assign a Static IP Address in Windows 98/Me? (continued) Step 2 Click Specify an IP Address. Enter in an IP Address that is on the same subnet as the LAN IP Address on your router. Example: If the routers LAN IP Address is 192.168.0.1, make your IP Address 192.168.0.X where X is between 2-99. Make sure that the number you choose is not in use on the network. Step 3 Click on the Gateway tab. Enter the LAN IP Address of your router here (192.168.0.1). Click Add when nished. Step 4 Click on the DNS Conguration tab. Click Enable DNS. Type in a Host (can be any word). Under DNS server search order, enter the LAN IP Address of your router (192.168.0.1). Click Add. Step 5 Click OK twice. When prompted to reboot your computer, click Yes. After you reboot, the computer will now have a static, private IP Address. Step 5 Access the web management. Open your web browser and enter the IP Address of your D-Link device in the address bar. This should open the login page for the web management. Follow instructions to login and complete the conguration. 72 Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection?
(IE AT&T-BI, Cox, Adelphia, Rogers, Roadrunner, Charter, and Comcast). Dynamic Cable connection Note: Please congure the router with the computer that was last connected directly to the cable modem. Step 1 Log into the web based conguration by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Home tab and click the WAN button. Dynamic IP Address is the default value, however, if Dynamic IP Address is not selected as the WAN type, select Dynamic IP Address by clicking on the radio button. Click Clone Mac Address. Click on Apply and then Continue to save the changes. 73 Frequently Asked Questions (continued) How can I setup my router to work with a Cable modem connection?
(continued) Step 3 Power cycle the cable modem and router:
Turn the cable modem off (rst) . Turn the router off Leave them off for 2 minutes.**
Turn the cable modem on (rst). Wait until you get a solid cable light on the cable modem. Turn the router on. Wait 30 seconds.
** If you have a Motorola (Surf Board) modem, leave off for at least 5 minutes. Step 4 Follow step 1 again and log back into the web conguration. Click the Status tab and click the Device Info button. If you do not already have a public IP Address under the WAN heading, click on the DHCP Renew and Continue buttons. Static Cable Connection Step 1 Log into the web based conguration by typing in the IP Address of the router
(default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank (nothing). Step 2 Click the Home tab and click the WAN button. Select Static IP Address and enter your static settings obtained from the ISP in the elds provided. If you do not know your settings, you must contact your ISP. Step 3 Click on Apply and then click Continue to save the changes. Step 4 Click the Status tab and click the Device Info button. Your IP Address information will be displayed under the WAN heading. 74 Frequently Asked Questions (continued) How can I setup my router to work with Earthlink DSL or any PPPoE connection?
Make sure you disable or uninstall any PPPoE software such as WinPoet or Enternet 300 from your computer or you will not be able to connect to the Internet. Step 1 Upgrade Firmware if needed.
(Please visit the D-Link tech support website at: http://support.dlink.com for the latest rmware upgrade information.) Step 2 Take a paperclip and perform a hard reset. With the unit on, use a paperclip and hold down the reset button on the back of the unit for 10 seconds. Release it and the router will recycle, the lights will blink, and then stabilize. Step 3 After the router stabilizes, open your browser and enter 192.168.0.1 into the address window and hit the Enter key. When the password dialog box appears, enter the username admin and leave the password blank. Click OK. If the password dialog box does not come up repeat Step 2. Note: Do not run Wizard. Step 4 Click on the WAN tab on left-hand side of the screen. Select PPPoE. Step 5 Select Dynamic PPPoE (unless your ISP supplied you with a static IP Address). Step 6 In the username eld enter ELN/username@earthlink.net and your password, where username is your own username. For SBC Global users, enter username@sbcglobal.net. For Ameritech users, enter username@ameritech.net. For BellSouth users, enter username@bellsouth.net. For Mindspring users, enter username@mindspring.com. For most other ISPs, enter username. Step 7 Maximum Idle Time should be set to zero. Set MTU to 1492, unless specied by your ISP, and set Autoreconnect to Enabled. Note: If you experience problems accessing certain websites and/or email issues, please set the MTU to a lower number such as 1472, 1452, etc. Contact your ISP for more information and the proper MTU setting for your connection. 75 Frequently Asked Questions (continued) How can I setup my router to work with Earthlink DSL or any PPPoE connection? (continued) Step 8 Click Apply. When prompted, click Continue. Once the screen refreshes, unplug the power to the D-Link router. Step 9 Turn off your DSL modem for 2-3 minutes. Turn back on. Once the modem has established a link to your ISP, plug the power back into the D-Link router. Wait about 30 seconds and log back into the router. Step 10 Click on the Status tab in the web conguration where you can view the device info. Under WAN, click Connect. Click Continue when prompted. You should now see that the device info will show an IP Address, verifying that the device has connected to a server and has been assigned an IP Address. Can I use my D-Link Broadband Router to share my Internet connection provided by AOL DSL Plus?
In most cases yes. AOL DSL+ may use PPPoE for authentication bypassing the client software. If this is the case, then our routers will work with this service. Please contact AOL if you are not sure. To set up your router:
Step 1 Log into the web-based conguration (192.168.0.1) and congure the WAN side to use PPPoE. Step 2 Enter your screen name followed by @aol.com for the user name. Enter your AOL password in the password box. Step 3 You will have to set the MTU to 1400. AOL DSL does not allow for anything higher than 1400. Step 4 Apply settings. Step 5 Recycle the power to the modem for 1 minute and then recycle power to the router. Allow 1 to 2 minutes to connect. If you connect to the Internet with a different internet service provider and want to use the AOL software, you can do that without conguring the routers rewall settings. You need to congure the AOL software to connect using TCP/IP. Go to http://www.aol.com for more specic conguration information of their software. 76 Frequently Asked Questions (continued) How do I open ports on my router?
To allow trafc from the internet to enter your local network, you will need to open up ports or the router will block the request. Step 1 Open your web browser and enter the IP Address of your D-Link router
(192.168.0.1). Enter username
(admin) and your password
(blank by default). Step 2 Click on Advanced on top and then click Virtual Server on the left side. Step 3 Check Enabled to activate entry. Step 4 Enter a name for your virtual server entry. Step 5 Next to Private IP, enter the IP Address of the computer on your local network that you want to allow the incoming service to. Step 6 Choose Protocol Type - either TCP, UDP, or both. If you are not sure, select both. Step 7 Enter the port information next to Private Port and Public Port. The private and public ports are usually the same. The public port is the port seen from the WAN side, and the private port is the port being used by the application on the computer within your local network. Step 8 Enter the Schedule information. Step 9 Click Apply and then click Continue. Note: Make sure DMZ host is disabled. If DMZ is enabled, it will disable all Virtual Server entries. Because our routers use NAT (Network Address Translation), you can only open a specic port to one computer at a time. For example: If you have 2 web servers on your network, you cannot open port 80 to both computers. You will need to congure 1 of the web servers to use port 81. Now you can open port 80 to the rst computer and then open port 81 to the other computer. 77 Frequently Asked Questions (continued) What is DMZ?
Demilitarized Zone:
In computer networks, a DMZ (demilitarized zone) is a computer host or small network inserted as a neutral zone between a companys private network and the outside public network. It prevents outside users from getting direct access to a server that has company data. (The term comes from the geographic buffer zone that was set up between North Korea and South Korea following the UN police action in the early 1950s.) A DMZ is an optional and more secure approach to a rewall and effectively acts as a proxy server as well. In a typical DMZ conguration for a small company, a separate computer (or host in network terms) receives requests from users within the private network for access to Web sites or other companies accessible on the public network. The DMZ host then initiates sessions for these requests on the public network. However, the DMZ host is not able to initiate a session back into the private network. It can only forward packets that have already been requested. Users of the public network outside the company can access only the DMZ host. The DMZ may typically also have the companys Web pages so these could be served to the outside world. However, the DMZ provides access to no other company data. In the event that an outside user penetrated the DMZ hosts security, the Web pages might be corrupted but no other company information would be exposed. D-Link, a leading maker of routers, is one company that sells products designed for setting up a DMZ How do I congure the DMZ Host?
The DMZ feature allows you to forward all incoming ports to one computer on the local network. The DMZ, or Demilitarized Zone, will allow the specied computer to be exposed to the Internet. DMZ is useful when a certain application or game does not work through the rewall. The computer that is congured for DMZ will be completely vulnerable on the Internet, so it is suggested that you try opening ports from the Virtual Server or Firewall settings before using DMZ. Step 1 Find the IP address of the computer you want to use as the DMZ host. To nd out how to locate the IP Address of the computer in Windows XP/2000/ME/9x or Macintosh operating systems please refer to Step 4 of the rst question in this section (Frequently Asked Questions). 78 Frequently Asked Questions (continued) How do I congure the DMZ Host? (continued) Step 2 Log into the web based conguration of the router by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password is blank
(nothing) Step 3 Click the Advanced tab and then click on the DMZ button. Select Enable and type in the IP Address you found in step 1. Step 4 Click Apply and then Continue to save the changes. Note: When DMZ is enabled, Virtual Server settings will still be effective. Remember, you cannot forward the same port to multiple IP Addresses, so the Virtual Server settings will take priority over DMZ settings. 79 Frequently Asked Questions (continued) How do I open a range of ports on my DI-524 using Firewall rules?
Step 1 Access the routers web conguration by entering the routers IP Address in your web browser. The default IP Address is 192.168.0.1. Login using your password. The default username is admin and the password is blank. If you are having difculty accessing web management, please see the rst question in this section. Step 2 From the web management Home page, click the Advanced tab then click the Firewall button. Step 3 Click on Enabled and type in a name for the new rule. Step 4 Choose WAN as the Source and enter a range of IP Addresses out on the internet that you would like this rule applied to. If you would like this rule to allow all internet users to be able to access these ports, then put an Asterisk in the rst box and leave the second box empty. Step 5 Select LAN as the Destination and enter the IP Address of the computer on your local network that you want to allow the incoming service to. This will not work with a range of IP Addresses. Step 6 Enter the port or range of ports that are required to be open for the incoming service. Step 7 Click Apply and then click Continue. Note: Make sure DMZ host is disabled. Because our routers use NAT (Network Address Translation), you can only open a specic port to one computer at a time. For example: If you have 2 web servers on your network, you cannot open port 80 to both computers. You will need to congure 1 of the web servers to use port 81. Now you can open port 80 to the rst computer 80 and then open port 81 to the other computer. Frequently Asked Questions (continued) What are virtual servers?
A Virtual Server is dened as a service port, and all requests to this port will be redirected to the computer specied by the server IP. For example, if you have an FTP Server (port 21) at 192.168.0.5, a Web server (port 80) at 192.168.0.6, and a VPN server at 192.168.0.7, then you need to specify the following virtual server mapping table:
Server Port Server IP Enable 21 80 1723 192.168.0.5 192.168.0.6 192.168.0.7 X X X How do I use PC Anywhere with my DI-524 router?
You will need to open 3 ports in the Virtual Server section of your D-Link router. Step 1 Open your web browser and enter the IP Address of the router
(192.168.0.1). Step 2 Click on Advanced at the top and then click Virtual Server on the left side. Step 3 Enter the information as seen below. The Private IP is the IP Address of the computer on your local network that you want to connect to. Step 4 The rst entry will read as shown here:
Step 5 Click Apply and then click Continue. 81 Frequently Asked Questions (continued) How do I use PC Anywhere with my DI-524 router? (continued) Step 6 Create a second entry as shown here:
Step 7 Click Apply and then click Continue. Step 8 Create a third and nal entry as shown here:
Step 9 Click Apply and then click Continue. Step 10 Run PCAnywhere from the remote site and use the WAN IP Address of the router, not your computers IP Address. 82 Frequently Asked Questions (continued) How can I use eDonkey behind my D-Link Router?
You must open ports on your router to allow incoming trafc while using eDonkey. eDonkey uses three ports (4 if using CLI):
4661 (TCP) To connect with a server 4662 (TCP) To connect with other clients 4665 (UDP) To communicate with servers other than the one you are connected to. 4663 (TCP) *Used with the command line (CLI) client when it is congured to allow remote connections. This is the case when using a Graphical Interface (such as the Java Interface) with the client. Step 1 Open your web browser and enter the IP Address of your router
(192.168.0.1). Enter username (admin) and your password (leave blank). Step 2 Click on Advanced and then click Firewall. Step 3 Create a new rewall rule:
Click Enabled. Enter a name
(edonkey). Click Allow. Next to Source, select WAN under interface. In the rst box, enter an *. Leave the second box empty. Next to Destination, select LAN under interface. Enter the IP Address of the computer you are running eDonkey from. Leave the second box empty. Under Protocol, select *. In the port range boxes, enter 4661 in the rst box and then 4665 in the second box. Click Always or set a schedule. Step 4 Click Apply and then Continue. 83 Frequently Asked Questions (continued) How do I set up my router for SOCOM on my Playstation 2?
To allow you to play SOCOM and hear audio, you must download the latest rmware for the router (if needed), enable Game Mode, and open port 6869 to the IP Address of your Playstation. Step 1 Upgrade rmware (follow link above). Step 2 Open your web browser and enter the IP Address of the router
(192.168.0.1). Enter username (admin) and your password (blank by default). Step 3 Click on the Advanced tab and then click on Virtual Server on the left side. Step 4 You will now create a new Virtual Server entry. Click Enabled and enter a name (socom). Enter the IP Address of your Playstation for Private IP. Step 5 For Protocol Type select Both. Enter 6869 for both the Private Port and Public Port. Click Always. Click Apply to save changes and then Continue Step 6 Click on the Tools tab and then Misc on the left side. Step 7 Make sure Gaming Mode is Enabled. If not, click Enabled. Click Apply and then Continue. 84 Frequently Asked Questions (continued) How can I use Gamespy behind my D-Link router?
Step 1 Open your web browser and enter the IP Address of the router
(192.168.0.1). Enter admin for the username and your password (blank by default). Step 2 Click on the Advanced tab and then click Virtual Server on the left side. Step 3 You will create 2 entries. Step 4 Click Enabled and enter Settings:
NAME - Gamespy1 PRIVATE IP - The IP Address of your computer that you are running Gamespy from. PROTOCOL TYPE - Both PRIVATE PORT - 3783 PUBLIC PORT - 3783 SCHEDULE - Always. Click Apply and then continue Step 5 Enter 2nd entry:
Click Enabled NAME - Gamespy2 PRIVATE IP - The IP Address of your computer that you are running Gamespy from. PROTOCOL TYPE - Both PRIVATE PORT - 6500 PUBLIC PORT - 6500 SCHEDULE - Always. Click Apply and then continue. 85 Frequently Asked Questions (continued) How do I congure my router for KaZaA and Grokster?
The following is for KaZaA, Grokster, and others using the FastTrack P2P le sharing system. In most cases, you do not have to congure anything on the router or on the Kazaa software. If you are having problems, please follow steps below:
Step 1 Enter the IP Address of your router in a web browser (192.168.0.1). Step 2 Enter your username (admin) and your password (blank by default). Step 3 Click on Advanced and then click Virtual Server. Step 4 Click Enabled and then enter a Name (kazaa for example). Step 5 Enter the IP Address of the computer you are running KaZaA from in the Private IP box. Select TCP for the Protocol Type. Step 6 Enter 1214 in the Private and Public Port boxes. Click Always under schedule or set a time range. Click Apply. Make sure that you did not enable proxy/rewall in the KaZaA software. 86 Frequently Asked Questions (continued) How do I congure my router to play Warcraft 3?
You must open ports on your router to allow incoming trafc while hosting a game in Warcraft 3. To play a game, you do not have to congure your router. Warcraft 3 (Battlenet) uses port 6112. For the DI-604, DI-614+. DI-524, DI-754, DI-764, or DI-774:
Step 1 Open your web browser and enter the IP Address of your router (192.168.0.1). Enter username (admin) and your password (leave blank). Step 2 Click on Advanced and then click Virtual Server. Step 3 Create a new entry:
Click Enabled. Enter a name
(warcraft3). Private IP - Enter the IP Address of the computer you want to host the game. Select Both for Protocol Type Enter 6112 for both Private Port and Public Port Click Always or set a schedule. Step 4 Click Apply and then Continue. Note: If you want multiple computers from you LAN to play in the same game that you are hosting, then repeat the steps above and enter the IP Addresses of the other computers. You will need to change ports. Computer #2 can use port 6113, computer
#3 can use 6114, and so on. You will need to change the port information within the Warcraft 3 software for computers #2 and up. Congure the Game Port information on each computer:
Start Warcraft 3 on each computer, click Options > Gameplay. Scroll down and you should see Game Port. Enter the port number as you entered in the above steps. 87 Frequently Asked Questions (continued) How do I use NetMeeting with my D-Link Router?
Unlike most TCP/IP applications, NetMeeting uses DYNAMIC PORTS instead of STATIC PORTS. That means that each NetMeeting connection is somewhat different than the last. For instance, the HTTP web site application uses port 80. NetMeeting can use any of over 60,000 different ports. All broadband routers using (only) standard NAT and all internet sharing programs like Microsoft ICS that use (only) standard NAT will NOT work with NetMeeting or other h.323 software packages. The solution is to put the router in DMZ. Note: A few hardware manufacturers have taken it on themselves to actually provide H.323 compatibility. This is not an easy task since the router must search each incoming packet for signs that it might be a netmeeting packet. This is a whole lot more work than a router normally does and may actually be a weak point in the rewall. D-Link is not one of the manufacturers. To read more on this visit http://www.HomenetHelp.com How do I set up my router to use iChat? -for Macintosh users-
You must open ports on your router to allow incoming trafc while using iChat. iChat uses the following ports: 5060 (UDP) 5190 (TCP) File Sharing 16384-16403
(UDP) To video conference with other clients Step 1 Open your web browser and enter the IP Address of your router
(192.168.0.1). Enter username (admin) and your password (leave blank). Step 2 Click on Advanced and then click Firewall. 88 Frequently Asked Questions (continued) How do I set up my router to use iChat? -for Macintosh users-
(continued) Step 3 Create a new rewall rule:
Click Enabled. Enter a name
(ichat1). Click Allow. Next to Source, select WAN under interface. In the rst box, enter an *. Leave the second box empty. Next to Destination, select LAN under interface. Enter the IP Address of the computer you are running iChat from. Leave the second box empty. Under Protocol, select UDP. In the port range boxes, enter 5060 in the rst box and leave the second box empty. Click Always or set a schedule. Step 4 Click Apply and then Continue. Step 5 Repeat steps 3 and 4 enter ichat2 and open ports 16384-16403
(UDP). 89 Frequently Asked Questions (continued) How do I set up my router to use iChat? -for Macintosh users-
(continued) For File Sharing:
Step 1 Click on Advanced and then Virtual Server. Step 2 Check Enabled to activate entry. Step 3 Enter a name for your virtual server entry
(ichat3). Step 4 Next to Private IP, enter the IP Address of the computer on your local network that you want to allow the incoming service to. Step 5 Select TCP for Protocol Type. Step 6 Enter 5190 next to Private Port and Public Port. Stsp 7 Click Always or congure a schedule. Step 8 Click Apply and then Continue. If using Mac OS X Firewall, you may need to temporarily turn off the rewall in the Sharing preference pane on both computers. To use the Mac OS X Firewall, you must open the same ports as in the router:
Step 1 Choose Apple menu > System Preferences. Step 2 Choose View > Sharing. Step 3 Click the Firewall tab. Step 4 Click New. Step 5 Choose Other from the Port Name pop-up menu. Step 6 In the Port Number, Range or Series eld, type in: 5060, 16384-16403. Step 7 In the Description eld type in: iChat AV Step 8 Click OK. 90 Frequently Asked Questions (continued) How do I send or receive a le via iChat when the Mac OSX rewall is active? -for Macintosh users- Mac OS X 10.2 and later The following information is from the online Macintosh AppleCare knowledge base:
iChat cannot send or receive a le when the Mac OS X rewall is active in its default state. If you have opened the AIM port, you may be able to receive a le but not send them. In its default state, the Mac OS X rewall blocks le transfers using iChat or America Online AIM software. If either the sender or receiver has turned on the Mac OS X re-
wall, the transfer may be blocked. The simplest workaround is to temporarily turn off the rewall in the Sharing preference pane on both computers. This is required for the sender. However, the receiver may keep the rewall on if the AIM port is open. To open the AIM port:
Step 1 Choose Apple menu > System Preferences. Step 2 Choose View > Sharing. Step 3 Click the Firewall tab. Step 4 Click New. Step 5 Choose AOL IM from the Port Name pop-up menu. The number 5190 should already be lled in for you. Step 6 Click OK. If you do not want to turn off the rewall at the sending computer, a different le sharing service may be used instead of iChat. The types of le sharing available in Mac OS X are outlined in technical document 106461, Mac OS X: File Sharing in the AppleCare Knowledge base online. Note: If you use a le sharing service when the rewall is turned on, be sure to click the Firewall tab and select the service you have chosen in the Allow list. If you do not do this, the rewall will also block the le sharing service. 91 Frequently Asked Questions (continued) What is NAT?
NAT stands for Network Address Translator. It is proposed and described in RFC-1631 and is used for solving the IP Address depletion problem. Basically, each NAT box has a table consisting of pairs of local IP Addresses and globally unique addresses, by which the box can translate the local IP Addresses to global address and vice versa. Simply put, it is a method of connecting multiple computers to the Internet (or any other IP network) using one IP Address. D-Links broadband routers (ie: DI-604) support NAT. With proper conguration, multiple users can access the Internet using a single account via the NAT device. For more information on RFC-1631: The IP Network Address Translator (NAT), visit http://www.faqs.org/rfcs/rfc1631.html 92 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
" This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. "
1 | INTERNAL PHOTOS | Internal Photos | 462.71 KiB | July 13 2007 |
Report No
(3) EUT Photo (Power Adapter: D-Link, AF1275-B) 073H079-RFUSP05V01
(4) EUT Photo Page: 86 of 93 Version:1.0 Report No
(5) EUT Photo 073H079-RFUSP05V01
(6) EUT Photo Page: 87 of 93 Version:1.0 Report No
(7) EUT Photo 073H079-RFUSP05V01
(8) EUT Photo Page: 88 of 93 Version:1.0 Report No
(9) EUT Photo 073H079-RFUSP05V01 Page: 89 of 93 Version:1.0 Report No
(10) EUT Photo 073H079-RFUSP05V01 Page: 90 of 93 Version:1.0 Report No
(11) EUT Photo 073H079-RFUSP05V01 Page: 91 of 93 Version:1.0 Report No
(12) EUT Photo 073H079-RFUSP05V01
(13) EUT Photo Page: 92 of 93 Version:1.0 Report No
(14) EUT Photo 073H079-RFUSP05V01
(15) EUT Photo Page: 93 of 93 Version:1.0
1 | EXTERNAL PHOTOS | External Photos | 105.59 KiB | July 13 2007 |
Report No Attachement
EUT Photograph
(1) EUT Photo (Power Adapter: D-Link, AM-0751500D) 073H079-RFUSP05V01
(2) EUT Photo Page: 85 of 93 Version:1.0 Report No
(3) EUT Photo (Power Adapter: D-Link, AF1275-B) 073H079-RFUSP05V01
(4) EUT Photo Page: 86 of 93 Version:1.0
1 | LABEL LOCATION | ID Label/Location Info | 51.73 KiB | July 13 2007 |
D-Link Corporation The Canada ID and DoC Label will be placed on the equipment as shown in the photograph below. Wireless Router Model No.: DI-524 FFCCCC IIDD :: KA2DI524G1
" This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference may cause undesired operation. "
No. 289 , Sinhu 3rd Rd , Neihu District , Taipei City 114 ,Taiwan , R.O.C.
1 | ATTESTATION STATEMENT | Attestation Statements | 40.36 KiB | July 13 2007 |
Federal Communications Commission. Authorization and Evaluation Division ATTESTATION FCC ID: KA2DI524G1 Product: Wireless Router Model: DI-524 We don't provide any controls or software to allow operation outside the USA frequency band when we sell this product in USA. Sincerely, Advance Multimedia Internet Technology _ A-ha?) Spencer Huang / Engineer
(Authorized Agent of D-Link Corporation)
1 | OPERATIONAL DESCRIPTION | Operational Description | 38.12 KiB | July 13 2007 |
Report No 073H079-RFUSP05V01 1.2. Operational Description EUT is a Wireless Broadband Router. This device provided four kinds of transmitting speed 1, 2, 5.5 and 11Mbps for IEEE 802.11b and eight kinds of transmitting speed 6, 9, 12, 18, 24, 36, 48 and 54Mbps for IEEE 802.11g. The device of RF carrier is DQPSK, DBPSK and CCK. The device adapts Digitally Modulation Spread Spectrum modulation. The Connector antenna was provides diversity function to improve the receiving function. This Wireless Router, compliant with IEEE 802.11b and IEEE 802.11g, is a high-efficiency Wireless LAN adapter. It allows your computer to connect to a wireless network and to share resources, such as files or printers without being bound to the network wires. Operation in 2.4GHz Direst Sequence Spread Spectrum (DSSS) radio transmission for IEEE 802.11b and Orthogonal Frequency Division Multiplexing (OFDM) for IEEE 802.11g, the Wireless Router Wired Equivalent Protection (WEP) algorithm is used. In addition, its standard compliance ensures that it can communicate with any IEEE 802.11b and IEEE 802.11g network. The EUT is an 802.11g high-performance, wireless router that supports high-speed wireless networking at home, at work or in public places. Unlike most routers, the EUT provides data transfers at up to 108 Mbps (compared to the standard 54 Mbps) when used with other same EUTs. The 802.11g standard is backwards compatible with 802.11b products. This means that you do not need to change your entire network to maintain connectivity. You may sacri ce some of 802.11g s speed when you mix 802.11b and 802.11g devices, but you will not lose the ability to communicate when you incorporate the 802.11g standard into your 802.11b network. You may choose to slowly change your network by gradually replacing the 802.11b devices with 802.11g devices. In addition to offering faster data transfer speeds when used with other 802.11g products, the EUT has the newest, strongest, most advanced security features available today. When used with other 802.11g WPA (WiFi Protected Access) and 802.1x compatible products in a network with a RADIUS server, the security features include:
WPA: Wi-Fi Protected Access authorizes and identi es users based on a secret key that changes automatically at a regular interval. WPA uses TKIP (Temporal Key Integrity Protocol) to change the temporal key every 10,000 packets (a packet is a kind of message transmitted over a network.) This insures much greater security than the standard WEP security. (By contrast, the older WEP encryption required the keys to be changed manually.) 802.1x: Authentication is a rst line of defense against intrusion. In the Authentication process the server veries the identity of the client attempting to connect to the network. Unfamiliar clients would be denied access. Page: 6 of 93 Version:1.0
1 | SCHEMATICS | Schematics | 1.15 MiB | July 13 2007 |
5 4 3 2 1
(1) XD[15..0]
XD[15..0]
(1,2) SA[21..0]
SA[21..0]
Flash 16 bit U5 U5 S29JL064H70TA100 S29JL064H70TA100 32M(2M*16bits) SA1 SA2 SA3 SA4 SA5 SA6 SA7 SA8 SA9 SA10 SA11 SA12 SA13 SA14 SA15 SA16 SA17 SA18 SA19 SA20 SA21 3V3 25 24 23 22 21 20 19 18 8 7 6 5 4 3 2 1 48 17 16 9 10 13 37 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 VCC C75 C75 0.1uF/50V/Y5V 0.1uF/50V/Y5V GND 27 46 VSS VSS
(1)
(1)
(1) MEMW_n MEMR_n ROM_CS_n MEMW_n MEMR_n ROM_CS_n XD0 XD1 XD2 XD3 XD4 XD5 XD6 XD7 XD8 XD9 XD10 XD11 XD12 XD13 XD14 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15/A-1 BYTE#
WE#
RY/BY#
RESET#
OE#
CE#
29 31 33 35 38 40 42 44 30 32 34 36 39 41 43 45 47 11 15 12 28 26 R94 R94 0R/5%
0R/5%
R93 R93 0R/5%
0R/5%
R92 R92 0R/5%
0R/5%
R109 R109 0R/5%
0R/5%
XD15 SA0 3V3 GND POWER_GOOD (1,3,4) WP#/ACC 14 R56 R56 4K7/5%
4K7/5%
3V3 R95 R95 4K7/5%
4K7/5%
(1) MD[15..0]
MD[15..0]
(1) MA[12..0]
MA[12..0]
SDRAM U7 U7 IC42S16160-6TG/TSOP54P IC42S16160-6TG/TSOP54P 256Mbit(16Mbit*4I/O*4Bank) or NT5SV16M16BS-6K MA0MA0 MA1MA1 MA2MA2 MA3MA3 MA4MA4 MA5MA5 MA6MA6 MA7MA7 MA8MA8 MA9MA9 MA10MA10 MA11MA11 MA12MA12 3V3 C62 C62 10uF/6.3V/Y5V 10uF/6.3V/Y5V C60 C60 C63 C63 C67 C67 C70 C70 C74 C74 C69 C69 C65 C65 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 23 A0 24 A1 25 A2 26 A3 29 30 A4 A5 31 A6 32 A7 33 A8 34 A9 22 A10 35 A11 36 A12 40 3 9 43 49 1 14 27 54 28 41 6 12 46 52 NC VCCQ VCCQ VCCQ VCCQ VCC VCC VCC VSS VSS VSS VSSQ VSSQ VSSQ VSSQ DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 2 4 5 7 8 10 11 13 42 44 45 47 48 50 51 53 CLK 38 CKE 37
-CS 19
-RAS 18
-CAS 17
-WE 16 LDQM 15 UDQM 39 20 BA0/A13 BA1/A12 21 MD0MD0 MD1MD1 MD2MD2 MD3MD3 MD4MD4 MD5MD5 MD6MD6 MD7MD7 MD8MD8 MD9MD9 MD10MD10 MD11MD11 MD12MD12 MD13MD13 MD14MD14 MD15MD15 SDRAMCLK SDRAMCLK (1) N17819167 R77 R77 4K7/5%
4K7/5%
C71 C71 22P/5%/50V 22P/5%/50V GND GND RAS_n CAS_n WE_n DQM0 DQM1 RAS_n CAS_n WE_n DQM0 DQM1 BA0 BA1
(1)
(1)
(1)
(1)
(1)
(1)
(1) GND MA0 MA1 MA2 MA3 MA4 MA5 MA6 MA7 MA8 MA9 MA10 WE_n CAS_n RAS_n BA0 MD[15..0]
(1) MD[15..0]
(1) MA[12..0]
(1)
(1)
(1) WE_n CAS_n RAS_n R100 R100 4K7/5%
4K7/5%
GND
(1) BA0 3V3 GND 3V3 GND
(1,2,3,4,5)
(1,2,3,4,5) 3V3 R76 R76 4K7/5%
4K7/5%
N17819167
(1) SDRAMCLK SDRAMCLK
(1)
(1) DQM1 DQM0 DQM1 DQM0 21 22 23 24 27 28 29 30 31 32 20 15 16 17 18 19 33 37 34 35 36 14 SDRAM 16M(1M*16Bit) U6 U6 GLT5160L16(1Mx16) GLT5160L16(1Mx16) A0 DQ0 A1 DQ1 DQ2 A2 DQ3 A3 DQ4 A4 DQ5 A5 DQ6 A6 DQ7 A7 DQ8 A8 A9 DQ9 DQ10 A10 DQ11 DQ12 DQ13 DQ14 DQ15 CAS WE 2 3 5 6 8 9 11 12 39 40 42 43 45 46 48 49 MD0 MD1 MD2 MD3 MD4 MD5 MD6 MD7 MD8 MD9 MD10 MD11 MD12 MD13 MD14 MD15 3V3 RAS CS BA NC NC CKE CLK DQMU DQML VDD 1 VDD 25 VDDQ 7 VDDQ 13 VDDQ 38 VDDQ 44 VSS 26 VSS 50 VSSQ 4 VSSQ 10 VSSQ 41 VSSQ 47 GND D C B A D C B A 5 4 3 2 Title Title Title Size Size Size Document Number Document Number Document Number Custom Custom Custom Date:
Date:
Date:
Thursday, November 09, 2006 Thursday, November 09, 2006 Thursday, November 09, 2006 Sheet Sheet Sheet 6 6 6 of of of 6 6 6 1 Rev Rev Rev 0.0 0.0 0.0 5 4 3 2 1 D C B A J2 J2 SMA8400 SMA8400 5 4 23 1 ANT ANT2 C132 C132 8.2pF/NPO 8.2pF/NPO C137 C137 NC NC C131 C131 NC NC RGND RGND RGND RGND RGND C142 C142 8.2pF/NPO 8.2pF/NPO RGND ANT1 C124 C124 8.2pF/NPO 8.2pF/NPO RGND TXON
(1) 4 5 6 U11 U11 RXEN ANT RXEN HWS314 HWS314 TX 3 GND 2 RX 1 RX_LNA TX_PA RGND C138 C138 8.2pF/NPO 8.2pF/NPO BPF1 RXON
(1) C125 C125 0.5pF/NPO 0.5pF/NPO L4 L4 2.2nH 2.2nH C118 C118 0.5pF/NPO 0.5pF/NPO BALOUT C119 C119 0.5pF/NPO 0.5pF/NPO 1 5 RGND RGND RGND B1 B2 B3 B4 B5 GC1 GC2 GC3 GC4 GC5 L8 L8 1.5nH/280mA 1.5nH/280mA RGND N _ N L A B I P _ N L A B I
(1)
(1)
(1)
(1)
(1) U12 U12 1 C120 C120 0.1uF/10V/X5R 0.1uF/10V/X5R RGND C139 C139 3.3pF/NPO 3.3pF/NPO C134 C134 0.022uF/16V/X7R 0.022uF/16V/X7R 2V8 B6 B7
(1) RGND
(1) L7 L7 1.5nH/280mA 1.5nH/280mA L5 L5 1.5nH/280mA 1.5nH/280mA GC6 GC7 PAON PAOP VCC_PA C133 C133 C126 C126 C121 C121 PA_PE1 0.1uF/10V/X5R 0.1uF/10V/X5R RGND C110 C110 1000pF/50V/X7R 1000pF/50V/X7R RGND
/
/
1 1 p p F F N N P P O O
/
/
1 1 p p F F N N P P O O RGND VCC_PA 4 2 3 4 2 3 5 BL2012-05B2450B BL2012-05B2450B RXON RXI+
RXI-
RXQ+
RXQ-
RXHP
(1)
(1)
(1)
(1)
(1)
(1) 12K/1%
12K/1%
R177 R177 RGND 2V8 C160 C160 NC NC RGND RGND C157 8.2pF/NPO C157 8.2pF/NPO C158 C158 C159 C159 RGND 8 V 2 U13 U13 8 4 7 4 6 4
/
/
. 0 0 0 0 2 2 2 2 u u F F 1 1 6 6 V V X X 7 7 R R
/
/
8 V 2 5 4
/
/
. 0 0 0 0 2 2 2 2 u u F F 1 1 6 6 V V X X 7 7 R R
/
/
4 4 P H X R I S A B R 3 4 2 4 1 4 0 4 9 3 8 3 7 3 1 2 3 4 5 6 7 8 9 10 11 12 GC2 GC3 GC4 GC5 RFIN VCCFE GC6 GC7 RFOUTN RFOUTP VCCPA3 PAON 1 C G N O X R I X M C C V I F Z C C V I P _ X R I N _ X R P Q _ X R N Q _ X R T U O S S R I P H X R I S A B R G E R C C V AL2230S/QFN-48 AL2230S/QFN-48 QFN48-AHT QFN48-AHT 11010Y11024A1 11010Y11024A1 2 A P C C V 1 A P C C V T U O D P I S A B A P C C V N O X T I P _ X T I N _ X T P Q _ X T N Q _ X T 2 1 F E R V N O L L P T U O P T 3 1 4 1 5 1 6 1 7 1 8 1 9 1 0 2 1 2 2 2 3 2 4 2 REGCAP 36 GNDVCO 35 VTUNE 34 VCCDIV 33 CP 32 VCCCP 31 30 VCCPLL VCCDIG 29 DATA 28 CLK 27 LE 26 25 FREF Paddle 49 A P _ C C V A P _ C C V 8 V 2 C111 C111 C112 C112 C113 C113 0.1uF/10V/X5R 0.1uF/10V/X5R 0.01uF/16V/X7R 0.01uF/16V/X7R 0.1uF/10V/X5R 0.1uF/10V/X5R C161 C161 0.022uF/16V/X7R 0.022uF/16V/X7R REGCAP RGND REGCAP_+2.4V C143 C143 C149 C149 8.2pF/NPO 8.2pF/NPO 10uF/6.3V/Y5V 10uF/6.3V/Y5V RGND RGND C140 10pF/0402 C140 10pF/0402 RGND RGND 2V8 2V8 2V8 2V8 C141 3300pF/25V/X7R C141 3300pF/25V/X7R RGND C135 0.1uF/10V/X5R C135 0.1uF/10V/X5R RGND C136 0.022uF/16V/X7R C136 0.022uF/16V/X7R C127 C127 C122 10uF/6.3V/Y5V C122 10uF/6.3V/Y5V 0.1uF/10V/X5R 0.1uF/10V/X5R RGND CLKINRF RGND 1 TP2TP2 RGND SYNDATA SYNCLK SEN CLKINRF
(1)
(1)
(1)
(2) PLLON TXQ-
TXQ+
TXI-
TXI+
TXON
(1)
(1,2)
(1,2)
(1,2)
(1,2)
(1) RGND RGND RGND C114 C114 8.2pF/NPO 8.2pF/NPO RGND R146 R146 5K6/1%
5K6/1%
C107 C107 NC NC RGND RGND R134 R134 R R R135 R135 R R R136 R136 R R R137 R137 R R PDOUT
(1) VREF VREF
(1,2) PA_ON
(1) VREF 1 TP1TP1 3V3 VCC_PA R151 R151 0R/5%
0R/5%
C109 C109 10uF/6.3V/Y5V 10uF/6.3V/Y5V RGND RGND AGND
(2,4)
(1,2,3,4,6)
(1,2,3,4,6) 2V8 3V3 GND 2V8 3V3 GND GND 5 4 3 2 Title Title Title Size Size Size C C C Date:
Date:
Date:
Document Number Document Number Document Number Rev Rev Rev 0.0 0.0 0.0 Thursday, November 09, 2006 Thursday, November 09, 2006 Thursday, November 09, 2006 Sheet Sheet Sheet 5 5 5 of of of 6 6 6 1 D C B A 5 4 3 2 1 D C B A 3V3 U8 U8 AMS1117-ADJ AMS1117-ADJ VOUT 2 3 VIN J D A TAB 4 1 R112 R112 220R/1%
220R/1%
C87 C87 0.1uF/50V/Y5V 0.1uF/50V/Y5V C88 C88 100U 100U R111 R111 100R/1%
100R/1%
DC3V3 TO DC 1V8 1V8 1 U4 U4 IC-RSET-AIC-AIC809 IC-RSET-AIC-AIC809 1 2 2 3 3 POWER_GOOD (1,3,6) U3 U3 RESET IC RESET IC 2 1 2 1 3 3 3V3 R4 R4 4K7/5%
4K7/5%
S1 S1 D GND 2 1 GPIO3 GPIO3 Reset_to_default
(1) GND GND GND PBSW PBSW R3 R3 4K7/5%
4K7/5%
C84 C84 C83 C83 10uF/6.3V/Y5V 10uF/6.3V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V C92 C92 47uF/16V/CAP80 47uF/16V/CAP80 3V3 3V3 Status Led Display SWITCH LED DISPLAY VCC_IN L3 L3 RH356008/EMI_CHOKE_DIP RH356008/EMI_CHOKE_DIP L1 L1 RH356008/EMI_CHOKE_DIP RH356008/EMI_CHOKE_DIP 5V U1 U1
<Designator>
<Designator>
C167 C167 100uF/16V/CAP80 100uF/16V/CAP80 C4 C4 1000uF/16V/CAP200 1000uF/16V/CAP200 C5 C5 100uF/16V/CAP80 100uF/16V/CAP80 C130 C130 100uF/16V/CAP80 100uF/16V/CAP80 C1 C1 0.1uF/50V/Y5V 0.1uF/50V/Y5V SWIN SWOUT1 SWFB1 1 2 3 4 VIN VOUT FB SD GND 8 GND 7 GND 6 GND 5 AP1509 AP1509 DC7.5V TO DC 3V3 POW1 POW1 1 3 2 CONN-PWJACK:5.2/1.4/Ora CONN-PWJACK:5.2/1.4/Ora IND-SMD GSCD106~F 2A IND-SMD GSCD106~F 2A L2 L2 C2 C2 0.1U/-20%+80%/Y5V/50V 0.1U/-20%+80%/Y5V/50V D1 D1 SR34/F/SCHOTTKY3A40V SR34/F/SCHOTTKY3A40V D1812 D1812 R2 R2 200R/1%
200R/1%
R1 R1 120R/1%
120R/1%
2 1 2 1 GND 3V3 C166 C6 C6 C166 C3 C3 C164 C164 C165 C165 470uF/16V/CAP150 470uF/16V/CAP150 100uF/16V/CAP80 100uF/16V/CAP80 100uF/16V/CAP80 100uF/16V/CAP80 100uF/16V/CAP80 100uF/16V/CAP80 100uF/16V/CAP80 100uF/16V/CAP80 3V3 3V3 LED2 LED2 R33 220R/5%
R33 220R/5%
M1LED
(1) LED-DIP-GREEN LED-DIP-GREEN LED4 LED4 R69 220R/5%
R69 220R/5%
WLED
(1) LED-DIP-GREEN LED-DIP-GREEN 3V3 POWER LED LED1 LED1 R21 220R/5%
R21 220R/5%
LED-DIP-GREEN LED-DIP-GREEN 3V3 LED8 LED8 LED-DIP-GREEN LED-DIP-GREEN LED7 LED7 LED-DIP-GREEN LED-DIP-GREEN LED6 LED6 LED-DIP-GREEN LED-DIP-GREEN LED5 LED5 LED-DIP-GREEN LED-DIP-GREEN LED3 LED3 LED-DIP-GREEN LED-DIP-GREEN LNKLED1
(3) LNKLED2
(3) C LNKLED3
(3) LNKLED4
(3) WAN_LED_LINK (3) 3V3 3V3 1V8 AVDD Power 3V3A
(1) 3V3A 3V3 FB5 FB5 90Z 90Z C102 C102 C105 C105 10uF/6.3V/Y5V 10uF/6.3V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V GNDA VDD_IO Power 3V3D
(1) 3V3D FB6 FB6 600Z 600Z FB7 FB7 RF POWER 2V8 1 2 3 C99 C99 C98 C98 VOUT U10 U10 VIN GND EN(CE) AME8801CEEV/SOT25 AME8801CEEV/SOT25 NC(BP) 4 5 2V8 C101 C101 C95 C95 C97 C97 10uF/6.3V/Y5V 10uF/6.3V/Y5V 0.1uF/10V/X5R 0.1uF/10V/X5R 0.01uF/16V/X7R 0.01uF/16V/X7R 6.8pF/NPO 6.8pF/NPO 10uF/6.3V/Y5V 10uF/6.3V/Y5V GND 600Z 600Z C156 C156 C155 C155 10uF/6.3V/Y5V 10uF/6.3V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V GNDI FB3 FB3 90Z 90Z VDD_CORE Power 1V8D
(1) 1V8D C85 C85 C86 C86 10uF/6.3V/Y5V 10uF/6.3V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V GNDC 3V3 3V3A 3V3D 1V8 1V8D 2V8 GNDA GNDI GNDC GND 3V3 3V3A 3V3D 1V8 1V8D 2V8 GNDA GNDI GNDC GND
(1,2,3,5,6)
(1)
(1)
(1)
(1)
(2,5)
(1,2,3,5,6)
(1,2,3,5,6)
(1,2,3,5,6)
(1,2,3,5,6) GND B A 5 4 3 2 Title Title Title Size Size Size Document Number Document Number Document Number Custom Custom Custom Date:
Date:
Date:
Friday, December 01, 2006 Friday, December 01, 2006 Friday, December 01, 2006 Sheet Sheet Sheet 4 4 4 of of of 6 6 6 1 Rev Rev Rev 0.0 0.0 0.0 5 4 3 2 RXP1 R75 49R9/1%
R75 49R9/1%
TXP1 R71 49R9/1%
R71 49R9/1%
R36 R36
%
%
5 5 K K 1 1
/
/
R34 R34
%
%
5 5 K K 1 1
/
/
EM1_TXEN EM1_TXD3 EM1_TXD2 EM1_TXD1 EM1_TXD0 EM1_TX_CLK EM1_RXDV EM1_RXD3 EM1_RXD2 EM1_RXD1 EM1_RXD0 EM1_RX_CLK
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1)
(1) POWER_GOOD
(1,4,6) 3V3 R20 R20
%
%
5 5 K K 1 1
/
/
RP1 RP1 4K7/5%
4K7/5%
R11 R11
%
%
5 5 K K 1 1
/
/
R7 R7
%
%
5 5 K K 1 1
/
/
R14 R14 R16 R16 75R/5%
75R/5%
27R/5%
27R/5%
R13 R13 75R/5%
75R/5%
C25 C25 C27 C27 22P/5%/50V 22P/5%/50V 22P/5%/50V 22P/5%/50V R32 R32
%
%
5 5 K K 1 1
/
/
(4)
(4) LNKLED1 LNKLED2 LNKLED1 R129 R129 220R/5%
220R/5%
LNKLED2 R116 R116 220R/5%
220R/5%
R28 R28 R30 R30
%
%
5 5 K K 1 1
/
/
%
%
5 5 K K 1 1
/
/
R26 R26
%
%
5 5 K K 1 1
/
/
3V3 U2 U2 LED_FULL[1] P4_FORCE100 LED_LINK[2] P3_FORCE100 LED_SPEED[2] P2_FORCE100 LED_FULL[2] P1_FORCE100 LED_LINK[3] P0_FORCE100 LED_SPEED[3] P4_FORCE_FULL LED_FULL[3] P3_FORCE_FULL LED_LINK[4] P2_FORCE_FULL LED_SPEED[4] P1_FORCE_FULL LED_FULL[4] P0_FORCE_FULL 103 104 105 106 107 108 109 110 111 112 113 114 VLAN_ON 115 VCC 116 VCC 117 VCC 118 GND 119 GND 120 GND 121 REG_OUT 122 GND 123 X2 124 OSCI 125 VCC FXSD0 126 127 GND 128 RXIP0 RXIM0
(4)
(4) LNKLED3 LNKLED4 R98 R98 R78 R78 220R/5%
220R/5%
220R/5%
220R/5%
(4) WAN_LED_LINK R37 R37 220R/5%
220R/5%
NC/25MHz(20ppm)/49s NC/25MHz(20ppm)/49s CONTROL Y1 Y1 R65 R65 NC/1M5/5%
NC/1M5/5%
RXP1 RXM1 C50 C50 C49 C49 NC/22P/5%/50V NC/22P/5%/50V NC/22P/5%/50V NC/22P/5%/50V 2 0 1 1 0 1 0 0 1 9 9 8 9 7 9 6 9 5 9 4 9 3 9 2 9 1 9 0 9 9 8 8 8 7 8 6 8 5 8 4 8 3 8 2 8 1 8 0 8 9 7 8 7 7 7 6 7 5 7 4 7 3 7 2 7 1 7 0 7 9 6 8 6 7 6 6 6 5 6 N E _ X N E _ K B
]
0
[
L L U F _ D E L
]
1
[
K N I L _ D E L N E _ M T S _ F B
]
1
[
D E E P S _ D E L E D O M _ C A M _ 0 I I N E _ 4 R _ E T A D P U M
]
0
[
D E E P S _ D E L
]
0
[
K N I L _ D E L 1 _ O I _ D N G 1 _ O I _ C C V M A R S _ D N G M A R S _ C C V B T E S E R
]
1
[
L E S _ D E L
]
0
[
L E S _ D E L K L C X R _ 0 I I M E C R O F _ 0 P 0 L O C E C R O F _ 1 P 0 _ 0 D X R E C R O F _ 2 P 1 _ 0 D X R E C R O F _ 3 P 2 _ 0 D X R E C R O F _ 4 P 3 _ 0 D X R D N G C C V 0 V D X R K L C X T _ 0 I I M E C R O F _ 0 P 0 _ 0 D X T E C R O F _ 1 P 1 _ 0 D X T E C R O F _ 2 P 2 _ 0 D X T E C R O F _ 3 P 3 _ 0 D X T E C R O F _ 4 P 0 N E X T C D M I O D M 1 L O C T X E 4 P I N S I I M 4 P 2 _ O I _ D N G 2 _ O I _ C C V 1 _ 1 D X R I G N G A 2 _ 1 D X R K L C X R _ 1 I I M N E _ X _ C A M 0 _ 1 D X R IP175C/QFP128 IP175C/QFP128 C C V A D N G 0 P O X T 0 M O X T C C V A D N G D N G 1 P O X T 1 M O X T C C V A I 1 P X R 1 M X R I C C V A D N G I 2 P X R 2 M X R I C C V A 2 P O X T 2 M O X T C C V A D N G D N G 3 P O X T 3 M O X T C C V A 3 P X R I I 3 M X R D N G D N G I 4 P X R 4 M X R I C C V A D N G 4 P O X T 4 M O X T D N G D N G
) T E S I
(
S E R G B 1 2 3 4 5 6 7 8 9 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 1 9 1 0 2 1 2 2 2 3 2 4 2 5 2 6 2 7 2 8 2 9 2 0 3 1 3 2 3 3 3 4 3 5 3 6 3 7 3 8 3 25MHZ_OUT (1) V23A T X P 1 T X M 1 T X P 2 T X M 2 R X P 2 R X M 2 R X P 3 R X M 3 T X P 3 T X M 3 T X P 4 T X M 4 R X P 4 R X M 4 R19 R19 6K19/1%
6K19/1%
W A N _ R X P W A N _ R X N I I W A N _ T X O P W A N _ T X O N D C B A 3V3 C44 C44 10uF/6.3V/Y5V 10uF/6.3V/Y5V C42 C42 47uF/16V/CAP80 47uF/16V/CAP80 C54 C54 0.1uF/50V/Y5V 0.1uF/50V/Y5V Q1 Q1 IC-REG-GAMA-GM117 IC-REG-GAMA-GM117 C53 C53 0.1uF/50V/Y5V 0.1uF/50V/Y5V 3 Adj25 1 24 CONTROL R40 R40 0R/5%
0R/5%
V23A Put these CAP near to VCC_IO_1 and VCC_IO_2 C39 C39 C35 C35 C33 C33 C31 C31 C28 C28 C24 C24 C21 C21 C19 C19 C10 C10 3V3 C40 C40 C22 C22 C34 C34 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V V23 R41 R41 100R/1%
100R/1%
R42 R42 220R1%
220R1%
C56 C56 C15 C15 C11 C11 C47 C47 C7 C7 FB1 FB1 90Z 90Z V23A V23 C9 C9 C17 C17 C46 C46 C16 C16 C73 C73 100uF/16V/CAP80 100uF/16V/CAP80 0.1uF/50V/Y5V 0.1uF/50V/Y5V 100uF/16V/CAP80 100uF/16V/CAP80 10uF/6.3V/Y5V 10uF/6.3V/Y5V 10uF/6.3V/Y5V 10uF/6.3V/Y5V 10uF/6.3V/Y5V 10uF/6.3V/Y5V 100uF/16V/CAP80 100uF/16V/CAP80 100uF/16V/CAP80 100uF/16V/CAP80 100uF/16V/CAP80 100uF/16V/CAP80 47uF/16V/CAP80 47uF/16V/CAP80 C52 C52 C14 C14 C13 C13 C12 C12 C36 C36 C29 C29 C51 C51 C48 C48 3V3 GND 3V3 GND
(1,2,4,5,6)
(1,2,4,5,6) 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 5 4 3 2 R9 R9 R8 R8 27R/5%
27R/5%
75R/5%
75R/5%
(1) MDIO
(1) MDC
(1) EM2_COL EM2_RX_CLK (1) EM2_RXD0
(1)
(1) EM2_RXD1 EM2_RXD2
(1)
(1) EM2_RXD3 V23A C18 C18 22P/5%/50V 22P/5%/50V C8 C8 22P/5%/50V 22P/5%/50V TXD1_0 TXD1_1 TXD1_2 TXD1_3 TXEN1 RXD1_3 P4_HIGH 64 RXDV1 COS_EN 63 MII1_TXCLK 62 61 60 59 58 57 GND 56 VCC 55 SDA 54 53 SCL 52 TEST2 51 TEST1 VCC 50 GND 49 GND 48 VCC 47 VCC 46 GND 45 44 FXSD4 43 FXSD3 42 FXSD2 41 FXSD1 AVCC 40 GND 39 R6 R6 R5 R5 27R/5%
27R/5%
75R/5%
75R/5%
EM2_RXDV
(1) EM2_TX_CLK (1) EM2_TXD0
(1)
(1) EM2_TXD1 EM2_TXD2
(1) EM2_TXD3
(1)
(1) EM2_TXEN WAN_TXON WAN_TXOP WAN_RXIN WAN_RXIP V23 RXM4 RXP4 TXM4 TXP4 TXM3 TXP3 RXM3 RXP3 RXM2 RXP2 TXM2 TXP2 TXM1 TXP1 RXM1 RXP1 DIP50 DIP50 50PT1051AX 50PT1051AX 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 WAN_TX-
WAN_TX+
WAN_CT WAN_RX-
WAN_RX+
RX4M RX4P CMT4 TX4M TX4P TX3M TX3P CMT3 RX3M RX3P RX2M RX2P CMT2 TX2M TX2P TX1M TX1P CMT1 RX1M RX1P 1 C64 C64 RXM1 R74 49R9/1%
R74 49R9/1%
C68 C68 0.1uF/50V/Y5V 0.1uF/50V/Y5V TXM1 R68 49R9/1%
R68 49R9/1%
0.1uF/50V/Y5V 0.1uF/50V/Y5V RXP2 R64 49R9/1%
R64 49R9/1%
TXP2 R67 49R9/1%
R67 49R9/1%
RXM2 R63 49R9/1%
R63 49R9/1%
C57 C57 C61 C61 0.1uF/50V/Y5V 0.1uF/50V/Y5V TXM2 R66 49R9/1%
R66 49R9/1%
0.1uF/50V/Y5V 0.1uF/50V/Y5V RXP3 R53 49R9/1%
R53 49R9/1%
TXP3 R35 49R9/1%
R35 49R9/1%
RXM3 R52 49R9/1%
R52 49R9/1%
C55 C55 C43 C43 0.1uF/50V/Y5V 0.1uF/50V/Y5V TXM3 R31 49R9/1%
R31 49R9/1%
0.1uF/50V/Y5V 0.1uF/50V/Y5V RXP4 R25 49R9/1%
R25 49R9/1%
TXP4 R29 49R9/1%
R29 49R9/1%
RXM4 R24 49R9/1%
R24 49R9/1%
C32 C32 C38 C38 0.1uF/50V/Y5V 0.1uF/50V/Y5V TXM4 R27 49R9/1%
R27 49R9/1%
0.1uF/50V/Y5V 0.1uF/50V/Y5V WAN_RXIP R18 49R9/1%
R18 49R9/1%
WAN_TXOP R12 49R9/1%
R12 49R9/1%
C30 C30 C20 C20 WAN_RXIN R15 49R9/1%
R15 49R9/1%
0.1uF/50V/Y5V 0.1uF/50V/Y5V WAN_TXON R10 49R9/1%
R10 49R9/1%
0.1uF/50V/Y5V 0.1uF/50V/Y5V C26 C26 C37 C37 C45 C45 C58 C58 C66 C66 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V D C B A CMT1 R114 75R/5%
R114 75R/5%
C93 C93 1000pF/2KV//
1000pF/2KV//
FGND R83 75R/5%
R83 75R/5%
CMT2 C72 C72 1000pF/2KV//
1000pF/2KV//
FGND R73 75R/5%
R73 75R/5%
CMT3 C59 C59 1000pF/2KV//
1000pF/2KV//
FGND R39 75R/5%
R39 75R/5%
CMT4 RX1P RX1M TX1P R115 75R/5%
R115 75R/5%
R113 75R/5%
R113 75R/5%
TX1M RX2P RX2M TX2P R82 75R/5%
R82 75R/5%
R80 75R/5%
R80 75R/5%
TX2M RX3P RX3M TX3P R72 75R/5%
R72 75R/5%
R70 75R/5%
R70 75R/5%
TX3M RX4P RX4M TX4P R51 75R/5%
R51 75R/5%
C41 C41 1000pF/2KV//
1000pF/2KV//
R38 75R/5%
R38 75R/5%
TX4M P3 P3 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 41 42 43 44 FGND WAN_TX+
WAN_TX-
WAN_RX+
WAN_RX-
WAN_CT R23 R23 75R/5%
75R/5%
R22 R22 75R/5%
75R/5%
R17 R17 75R/5%
75R/5%
RJ45X4 RJ45X4 FGND J1 J1 1 2 3 4 5 6 7 8 RJ45 RJ45 11 12 13 14 FGND C23 C23 1000pF/2KV//
1000pF/2KV//
FGND FB2 90Z FB2 90Z FB4 90Z FB4 90Z FGND Title Title Title Size Size Size Document Number Document Number Document Number Custom Custom Custom Date:
Date:
Date:
Thursday, November 09, 2006 Thursday, November 09, 2006 Thursday, November 09, 2006 Rev Rev Rev 0.0 0.0 0.0 Sheet Sheet Sheet 3 3 3 of of of 6 6 6 1 D C B A 5 4 3 2 1 R62 4K7/5%
R62 4K7/5%
R61 4K7/5%
R61 4K7/5%
R60 4K7/5%
R60 4K7/5%
SA2 SA3 SA4 R50 4K7/5%
R50 4K7/5%
R49 4K7/5%
R49 4K7/5%
R48 4K7/5%
R48 4K7/5%
3V3 3V3 R54 4K7/5%
R54 4K7/5%
SA16 R59 4K7/5%
R59 4K7/5%
SA5 R47 4K7/5%
R47 4K7/5%
4K7/5%
4K7/5%
R81 R81 SA17 L9 10R/1%
L9 10R/1%
2V8 C116 C116 C C C150 C150 0.1uF/10V/X5R 0.1uF/10V/X5R C163 C163 10uF/6.3V/Y5V 10uF/6.3V/Y5V Y2 Y2 EN VCC 4 GND OUT 3 1 2 Oscillator_40MHz/SMD Oscillator_40MHz/SMD R159 R159 49R9/1%
49R9/1%
XIN R162 300R/1%
R162 300R/1%
N16981083 CLKINRF C128 C128 12pF/NPO 12pF/NPO C115 C115 1000pF/50V/X7R 1000pF/50V/X7R R164 R164 R R GND 3V3 R165 R165 4K7/5%
4K7/5%
U14 U14 1 2 3 4 SDA 5 A0 6 SCL A1 7 WP A2 VCC 8 VSS 24LC04A/SOIC8 24LC04A/SOIC8 SA15 SEEPROMCS_n 3V3 C129 0.1uF C129 0.1uF 3V3 R147 R147 R R VRP R148 R148 2K2/1%
2K2/1%
VCM R156 R156 2K2/1%
2K2/1%
C104 C104 R152 R152 C117 C117 R153 R153 VRN C108 C108 0.1uF/10V/X5R 0.1uF/10V/X5R R R 0.1uF/10V/X5R 0.1uF/10V/X5R R R 0.1uF/10V/X5R 0.1uF/10V/X5R EXTRESS VBGCAP TX_AGC_IN2 R163 R163 26K7/1%
26K7/1%
C123 C123 1uF/0402 1uF/0402 R166 R166 1K/1%
1K/1%
3V3 R174 R174 3K3/1%
3K3/1%
VREF2 R168 R168 100K/1%
100K/1%
VREF C144 C144 0.1uF/10V/X5R 0.1uF/10V/X5R R167 R167 100K/1%
100K/1%
C151 C151 0.1uF/10V/X5R 0.1uF/10V/X5R R173 R173 R R TXI-
TXI+
TXQ-
TXQ+
R169 R169 300R/1%
300R/1%
R175 R175 300R/1%
300R/1%
R176 R176 300R/1%
300R/1%
R170 R170 300R/1%
300R/1%
R178 R178 499R/1%
499R/1%
R179 R179 499/1%
499/1%
GND 3V3 R110 4K7/5%
R110 4K7/5%
R96 4K7/5%
R96 4K7/5%
R58 4K7/5%
R58 4K7/5%
R46 4K7/5%
R46 4K7/5%
R57 4K7/5%
R57 4K7/5%
R44 4K7/5%
R44 4K7/5%
R55 4K7/5%
R55 4K7/5%
R43 4K7/5%
R43 4K7/5%
R45 4K7/5%
R45 4K7/5%
SA0 SA1 SA6 SA7 SA8 SA9 SA10 SA11 SA18 SA[21..0]
(1,6) SA11 SA12 SA13 SA14 SA15 SA16 SA17 SA18 SA19 SA20 SA21 SA0 SA1 SA2 SA3 SA4 SA5 SA6 SA7 SA8 SA9 SA10 VREF VREF2
(1,5)
(1) TX_AGC_IN2 (1) EXTRESS
(1)
(1) VBGCAP VCM
(1)
(1) VRN VRP
(1) CLKINRF XIN TXI-
TXI+
TXQ-
TXQ+
(5)
(1)
(1,5)
(1,5)
(1,5)
(1,5) SEEPROMCS_n (1) 3V3 2V8 1V8 GND 3V3 2V8 1V8 GND
(1,3,4,5,6)
(4,5)
(1,4)
(1,3,4,5,6) D C B A 5 4 3 2 Title Title Title Size Size Size B B B Date:
Date:
Date:
Document Number Document Number Document Number Rev Rev Rev 0.0 0.0 0.0 Thursday, November 09, 2006 Thursday, November 09, 2006 Thursday, November 09, 2006 Sheet Sheet Sheet 1 2 2 2 of of of 6 6 6 5 4 3 2 1 D C B A R172 4K7/5%
R172 4K7/5%
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3)
(3) EM2_TX_CLK EM2_TXEN EM2_COL EM2_RX_CLK EM2_RXDV EM2_TXD0 EM2_TXD1 EM2_TXD2 EM2_TXD3 EM2_RXD0 EM2_RXD1 EM2_RXD2 EM2_RXD3 MDIO MDC EM1_RXDV EM1_RX_CLK EM1_TX_CLK EM1_TXEN EM1_RXD0 EM1_RXD1 EM1_RXD2 EM1_RXD3 EM1_TXD0 EM1_TXD1 EM1_TXD2 EM1_TXD3
(2,5)
(2,5)
(2,5)
(2,5)
(5)
(5)
(5)
(5)
(2,5)
(2)
(5)
(2)
(2)
(2)
(2)
(2)
(2) TXI-
TXI+
TXQ+
TXQ-
RXQ+
RXQ-
RXI-
RXI+
VREF VREF2 PDOUT TX_AGC_IN2 EXTRESS VBGCAP VCM VRN VRP
(5)
(5)
(5) TXON RXON PA_ON
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(5)
(4)
(4) B3 B4 B6 SEN SYNCLK SYNDATA B1 B5 B2 PLLON B7 RXHP M1LED WLED M1LED WLED U9 U9 1 7 8 TXC0/GPIO40 TXEN0/GPIO45 208 COL0/GPIO52 RXC0/GPIO46 202 RXDV0/GPIO47 3 4 5 6 203 205 206 207 TXD0_0/GPIO41 TXD0_1/GPIO42 TXD0_2/GPIO43 TXD0_3/GPIO44 RXD0_0/GPIO48 RXD0_1/GPIO49 RXD0_2/GPIO50 RXD0_3/GPIO51 10 11 12 18 19 25 26 13 14 15 16 21 22 23 24 47 46 45 44 66 65 62 61 50 51 52 53 55 56 57 58 59 68 69 71 72 75 74 86 85 82 80 78 77 88 83 87 76 81 90 91 92 MDIO MDC1 RXDV1 RXC1 TXC1 TXEN1 COL1 RXD1_0 RXD1_1 RXD1_2 RXD1_3 TXD1_0 TXD1_1 TXD1_2 TXD1_3 TXI_N TXI_P TXQ_P TXQ_N RXQ_P RXQ_N RXI_N RXI_P VREF VREF2 TX_AGC_IN1 TX_AGC_IN2 EXTRESS VBGCAP VCM VRN VRP ANTSEL ANTSEL_N TR_SW TR_SW_N PA_PE1 PA_PE2 B3 B4 WGPIO0 WGPIO1 WGPIO2 WGPIO3 WGPIO4 WGPIO5 WGPIO6 WGPIO7 RXRFAGC RXHP WLED0/GPIO0 WLED1/GPIO1
(4) Reset_to_default 148 149 INT0/GPIO3 INT1/GPIO4 3V3 R85 4K7/5%
R85 4K7/5%
150 ARDY
(6)
(6) BA1 BA0 1V8 FB8 FB8 600Z 600Z C162 C162 10uF/6.3V/Y5V 10uF/6.3V/Y5V C152 C152 0.1uF/50V/Y5V 0.1uF/50V/Y5V 1V8P GNDP
(3) 25MHZ_OUT R171 R171 27R/5%
27R/5%
TDO TMS TCK TDI SIN0 SOUT0 116 117 41 42 35 28 29 30 31 32 33 36 38 167 168 189 201 BA1 BA0 PLL_VDD PLL_GND CLK25/GPIO56 RTS0_n/GPIO9 CTS0_n/GPIO11 DSR0_n/GPIO12 DCD0_n/GPIO13 SIN0/GPIO7 SOUT0/GPIO8 POWER_GOOD X1 MEMW MEMR SEEPROMCS_ ROM_CS_n SDRAMCLK XCS0_/GPIO57 XCS1_/GPIO58 RAS_n CAS_n WE_n DQM0 DQM1 N18827828 105 R99 49R9/5%
R99 49R9/5%
146 147 118 120 121 122 107 3V3A GNDA 48 49 63 64 AVDD AVDD AVDD AVDD 67 60 AGND 54 AGND 43 AGND AGND W5610/QFP208 W5610/QFP208
(3,4,6) POWER_GOOD
(2) XIN
(6)
(6)
(2)
(6) MEMW_n MEMR_n SEEPROMCS_n ROM_CS_n
(6) SDRAMCLK C145 C145 0.1uF/50V/Y5V 0.1uF/50V/Y5V
(6)
(6)
(6)
(6)
(6) RAS_n CAS_n WE_n DQM0 DQM1
(4) 3V3A
(2,3,4,5,6) GNDA 3V3A GNDA MA0 MA1 MA2 MA3 MA4 MA5 MA6 MA7 MA8 MA9 MA10 MA11 MA12 MD0 MD1 MD2 MD3 MD4 MD5 MD6 MD7 MD8 MD9 MD10 MD11 MD12 MD13 MD14 MD15 XD0 XD1 XD2 XD3 XD4 XD5 XD6 XD7 XD8 XD9 XD10 XD11 XD12 XD13 XD14 XD15 112 111 110 108 94 95 96 98 99 101 114 102 103 133 132 131 129 128 127 125 124 135 136 137 139 140 141 143 144 178 176 175 174 173 172 171 170 179 180 181 183 184 185 186 187 MA0 MA1 MA2 MA3 MA4 MA5 MA6 MA7 MA8 MA9 MA10 MA11 MA12 R105 R105 R86 R86 R84 R84 R104 R104 R103 R103 R102 R102 R101 R101 R97 R97 R87 R87 R106 R106 R88 R88 R107 R107 R89 R89 R108 R108 R90 R90 R91 R91 R123 R123 R125 R125 R120 R120 R122 R122 R121 R121 R118 R118 R117 R117 R119 R119 R124 R124 R126 R126 R127 R127 R128 R128 R131 R131 R130 R130 R139 R139 R138 R138 27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
27R/5%
MD0 MD1 MD2 MD3 MD4 MD5 MD6 MD7 MD8 MD9 MD10 MD11 MD12 MD13 MD14 MD15 XD0 XD1 XD2 XD3 XD4 XD5 XD6 XD7 XD8 XD9 XD10 XD11 XD12 XD13 XD14 XD15 SA0 SA1 SA2 SA3 SA4 SA5 SA6 SA7 SA8 SA9 SA10 SA11 SA12 SA13 SA14 SA15 SA16 SA17 SA18 SA19 SA20 SA21 1V8D SA00 SA01 SA02 SA03 SA04 SA05 SA06 SA07 SA08 SA09 165 164 162 161 152 153 154 156 157 158 SA10/MAC0_GPIO 166 SA11/MAC1_GPIO 159 160 190 191 SA15/SEEPROMD 192 193 SA16/ROMSL SA17/JTAGEN 195 196 SA18 197 SA19/GPIO35 198 SA20/GPIO36 199 SA21/GPIO37 SA12 SA13 SA14 VDD_CORE VDD_CORE VDD_CORE VDD_CORE VDD_CORE VDD_CORE VDD_CORE VDD_CORE VDD_CORE VDD_CORE GND_CORE GND_CORE GND_CORE GND_CORE GND_CORE GND_CORE GND_CORE GND_CORE GND_CORE 200 182 151 130 115 89 70 40 39 9 20 37 84 97 106 123 142 169 188 VDD_IO 194 VDD_IO 163 VDD_IO 145 VDD_IO 134 VDD_IO 119 VDD_IO 109 VDD_IO 100 VDD_IO 79 VDD_IO 27 VDD_IO 2 GND_IO 17 GND_IO 34 GND_IO 73 GND_IO 93 GND_IO 104 GND_IO 113 GND_IO 126 GND_IO 138 GND_IO 155 GND_IO 177 GND_IO 204 3V3 R161 4K7/5%
R161 4K7/5%
R158 4K7/5%
R158 4K7/5%
R155 4K7/5%
R155 4K7/5%
R150 4K7/5%
R150 4K7/5%
R145 4K7/5%
R145 4K7/5%
R143 4K70/5%
R143 4K70/5%
R141 4K70/5%
R141 4K70/5%
R133 4K70/5%
R133 4K70/5%
XD0 XD1 XD2 XD3 XD4 XD5 XD6 XD7 R160 4K7/5%
R160 4K7/5%
R157 4K7/5%
R157 4K7/5%
R154 4K7/5%
R154 4K7/5%
R149 4K7/5%
R149 4K7/5%
R144 4K7/5%
R144 4K7/5%
R142 4K7/5%
R142 4K7/5%
R140 4K7/5%
R140 4K7/5%
R132 4K7/5%
R132 4K7/5%
MA[12..0]
(6) 3V3 GND TMS TDI TDO TCK R181 R181 1K/5%
1K/5%
R183 R183 1K/5%
1K/5%
R180 R180 1K/5%
1K/5%
R182 R182 1K/5%
1K/5%
J3 J3 CON1X6/JTAG CON1X6/JTAG 6 5 4 3 2 1 3V3 MD[15..0]
(6) XD[15..0]
(6) SA[21..0]
(2,6) 1V8D 3V3 SIN0 J4 J4 5V TX GND 2 4 6 GND 1 RX 3 5 5v Header2X3 Header2X3 SOUT0 C153 C153 C147 C147 C106 C106 C96 C96 C82 C82 C79 C79 C77 C77 C91 C91 C100 C100 C146 C146 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 1V8D
(4) GNDC GNDC
(2,3,4,5,6) GNDC 3V3D C80 C80 C103 C103 C154 C154 C90 C90 C81 C81 C78 C78 C76 C76 C89 C89 C94 C94 C148 C148 3V3D 3V3D
(4) 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V 0.1uF/50V/Y5V GNDI GNDI GNDI
(2,3,4,5,6) 3V3 1V8 GND 3V3 1V8 GND
(2,3,4,5,6)
(4)
(2,3,4,5,6) 5 4 3 2 Title Title Title Size Size Size Document Number Document Number Document Number Custom Custom Custom Date:
Date:
Date:
Thursday, November 30, 2006 Thursday, November 30, 2006 Thursday, November 30, 2006 Rev Rev Rev 0.0 0.0 0.0 Sheet Sheet Sheet 1 1 1 1 of of of 6 6 6 D C B A
(1.17:1) CAM350 V 9.0.1 : Tue Jun 26 13:19:59 2007 - (Untitled)
(1.17:1) CAM350 V 9.0.1 : Tue Jun 26 13:20:56 2007 - (Untitled)
(1.17:1) CAM350 V 9.0.1 : Tue Jun 26 13:21:32 2007 - (Untitled)
(1.17:1) CAM350 V 9.0.1 : Tue Jun 26 13:22:03 2007 - (Untitled)
(1.17:1) CAM350 V 9.0.1 : Tue Jun 26 13:22:41 2007 - (Untitled)
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-07-13 | 2412 ~ 2462 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-07-13
|
||||
1 | Applicant's complete, legal business name |
D-Link Corporation
|
||||
1 | FCC Registration Number (FRN) |
0007371172
|
||||
1 | Physical Address |
17595 Mt. Herrmann
|
||||
1 |
Fountain Valley, CA
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
KA2
|
||||
1 | Equipment Product Code |
DI524G1
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
B**** A******
|
||||
1 | Title |
General Counsel
|
||||
1 | Telephone Number |
714-8********
|
||||
1 | Fax Number |
866-7********
|
||||
1 |
b******@dlink.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WIRELESS ROUTER | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | POWER LISTED IS CONDUCTED. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
DEKRA Testing and Certification Co., Ltd.
|
||||
1 | Name |
S****** H****
|
||||
1 | Telephone Number |
886-2******** Extension:
|
||||
1 | Fax Number |
886-2********
|
||||
1 |
s******@quietek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0980000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC