submitted | available | document details (if available) | source link |
---|---|---|---|
May 11 2019 | June 11 2019 | Memor 10_US HE QSG 20190729---P1 Adobe PDF library 15.00 |
various | MEMOR 10 QSG HE 20190903 | Users Manual | 660.11 KiB | May 11 2019 / June 11 2019 |
Datalogic S.r.l. Via San Vitalino 13 40012 Calderara di Reno (BO) Italy Tel. +39 051 3147011 Fax +39 051 3147205 2018-2019 Datalogic S.p.A. and/or its affiliates All rights reserved. Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchasers own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page. Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be trademarks of their respective owners. Google, Google Play and other marks are trademarks of Google LLC. Patents See www.patents.datalogic.com for patent list. Out of the Box The Memor 10 package contains:
Memor 10 PDA Rechargeable one-piece battery pack USB Type-C cable Handstrap Quick Start Guide Safety & Regulatory Addendum End User License Agreement (EULA) Sheet Remove all the components from their packaging; check their integrity and compare them with all the packing documents. Keep the original packaging for use when sending products to the technical assistance center. Damage caused by improper packaging is not covered under the warranty. CAUTION General View Front View Charging LED Good Read Indicator Memor 10 with 1D/2D Imager Rugged Mobile Computer Quick Start Guide Reference Documentation For further information regarding Memor 10 refer to the SDK Help on-line and to the Memor 10 Users Manual, downloadable from our website www.datalogic.com. Support Through the Website Datalogic provides several services as well as technical support through its website. Log on to www.datalogic.com and click on the SUPPORT link which gives you access to:
Downloads by selecting your product model from the dropdown list in the Search by Product field for specific Data Sheets, Manuals, Software & Utilities, and Drawings;
Repair Program for On-Line Return Material Authorizations (RMAs) plus Repair Center contact information;
Customer Service containing details about Maintenance Agreements;
Technical Support through email or phone. Warranty Terms and Conditions The warranty period is 1 year for the device and 90 days for consumables (e.g. battery, power supply, cable etc.) from date of purchase at our company. 822002752 (Rev. A) July. 2019 Touch Panel Display See the Safety & Regulatory Addendum included with your product for additional regulatory, safety and legal information. Datalogic : www.datalogic.com The chinese version of the Quick Start Guide and the Safety & Regulatory addendum is downloadable from the Datalogic website: www. datalogic.com
(see Support Through the Website). Back Recent Home Back View TOF Sensor Speaker 2018-2019 Datalogic S.p.A. and/or its affiliates. All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. LED Flash Battery Swap LED SIM Card Socket MicroSD Card Socket www.datalogic.com Top View Data Capture Window Side View Power Button Right Trigger USB Type-C Port Volume Control Buttons Left Trigger Battery Installation 1. Rotate the latches to the open position:
2. Insert the battery pack into the slot, bottom first, and press it into place:
3. Rotate the latches to the lock position to lock the cover:
Charging Instructions The battery pack is not initially fully charged. After installing the battery, charge it with the USB Type-C or with a dock (single slot dock, 3-slot dock, vehicle dock, 4-slot battery charger). During the charging process the charging LED positioned at the top left side of the display glows red constantly. Once the charging process has been completed, the charging LED glows green constantly. CAUTION Charge with USB Use the provided USB Type-C cable in conjunction with the power supply adapter (p/n 94ACC0196) to charge the device from a power outlet. The charger is modular, with one adapter and five switchover plugs. Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot of any of the docks. Do not apply any sticker to the Memor 10 (see the examples below). Scanning and Imaging Imager Data Capture You can also use the USB cable to charge the Memor 10 from any self-powered USB hub or USB port on a computer. Use only the Datalogic power supply 94ACC0196 to power the Memor 10. CAUTION Charge with the Dock Insert the device into the dock with the screen facing front and the head facing up. For information on the single slot dock/ 3-slot dock/ vehicle dock/ 4-slot battery charger refer to the Quick Start Guide included in the dock's box. The Memor 10 may get warm during charging. This is normal and does not mean a malfunction. NOTE NOTE SIM Card Installation 1. Turn off the Memor 10 or put it in swap battery mode (refer to the Users Manual for more details). 2. Remove the battery pack (see Battery Installation):
3. Insert the SIM card with the written part upward. 4. Replace the battery (see Battery Installation). MicroSD Card Installation 1. Turn off the Memor 10 or put it in swap battery mode (refer to the Users Manual for more details). 2. Remove the battery pack (see Battery Installation):
3. Insert the microSD card with the written part upward. Use only the Datalogic power supply 94ACC0197 to power any of the docks. CAUTION 4. Replace the battery (see Battery Installation). LINEAR BARCODE 2D MATRIX SYMBOL Relative Size and Location of Aiming System Pattern LASER RADIATION DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT MAX OUTPUT RADIATION 1mW EMITTED WAVE LENGTH 630-680nm 5ms PULSE IEC/EN 60825-1:2014 Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC 60825-1 Ed.3.,as described in Laser Notice No.56,dated May 8,2019 2D Imager Data Capture To scan a bar code symbol:
1. Point the scan window at the bar code. 2. Press one of the scan triggers. A blue-violet spot illuminates the symbol, which is captured and decoded. If the scan has been successful:
If enabled, the good read beep plays. If enabled, the GreenSpot projects a green spot onto the bar code image. If enabled, the good read indicator positioned at the top left side of the display glows solid green.
This product uses the FCC Data API but is not endorsed or certified by the FCC