DL35US Smartphone quick srart guide Users Manual

Datalogic S.r.l. Via San Vitalino 13 40012 Calderara di Reno (BO) Italy Tel. +39 051 3147011 Fax +39 051 3147205 2018 Datalogic S.p.A. and/or its affiliates w All rights reserved. w Without limiting the rights under copyright, no part of this documentation may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchasers own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation. Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the Contact Datalogic page. Disclaimer Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be trademarks of their respective owners. Patents See www.patents.datalogic.com for patent list. Out of the Box The Memor 10 package contains:

yy Memor 10 PDA yy Rechargeable battery pack yy USB Type-C cable yy Handstrap yy Quick Start Guide yy Safety & Regulatory Addendum yy End User License Agreement (EULA) Sheet Remove all the components from their packaging; check their integrity and compare them with all the packing documents. Keep the original packaging for use when sending products to the technical assistance center. Damage caused by improper packaging is not covered under the warranty. CAUTION General View Front View Charging LED Good Read Indicator Memor 10 with 1D/2D Imager Rugged Mobile Computer Quick Start Guide Top View Data Capture Window Side View Power Button Right Trigger USB Type-C Port Volume Control Buttons Left Trigger Reference Documentation For further information regarding Memor 10 refer to the SDK Help on-line and to the Memor 10 Users Manual, downloadable from our website www.datalogic.com. Support Through the Website Datalogic provides several services as well as technical support through its website. Log on to www.datalogic.com and click on the SUPPORT link which gives you access to:

Downloads by selecting your product model from the dropdown list in the Search by Product field for specific Data Sheets, Manuals, Software & Utilities, and Drawings;

Repair Program for On-Line Return Material Authorizations (RMAs) plus Repair Center contact information;

Customer Service containing details about Maintenance Agreements;

Technical Support through email or phone. Warranty Terms and Conditions The warranty period is 1 year for the device and 90 days for consumables (e.g. battery, power supply, cable etc.) from date of purchase at our company. 822002750 (Rev. A) Sept. 2018 Touch Panel Display Back Recent Home Back View TOF Sensor Speaker LED Flash Battery Swap LED SIM Card Socket MicroSD Card Socket See the Safety & Regulatory Addendum included with your product for additional regulatory, safety and legal information. 2018 Datalogic S.p.A. and/or its affiliates. All rights reserved. Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S. and the E.U. www.datalogic.com Battery Installation 1. Rotate the latches to the open position:

Charge with the Dock Insert the device into the dock with the screen facing front and the head facing up. SIM Card Installation 1. Turn off the Memor 10 or put it in swap battery mode (refer to the Users Manual for more details). 2. Remove the battery pack (see Battery Installation):

3. Insert the SIM card with the written part upward. Use only the Datalogic power supply 94ACC0197 to power any of the docks. Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the slot of any of the docks. Do not apply any sticker to the Memor 10 (see the examples below). 4. Replace the battery (see Battery Installation). MicroSD Card Installation 1. Turn off the Memor 10 or put it in swap battery mode (refer to the Users Manual for more details). 2. Remove the battery pack (see Battery Installation):

3. Insert the microSD card with the written part upward. For information on the single slot dock/ 3-slot dock/ vehicle dock/ 4-slot battery charger refer to the Quick Start Guide included in the dock's box. Scanning and Imaging 4. Replace the battery (see Battery Installation). The Memor 10 may get warm during charging. This is normal and does not mean a malfunction. 2D Imager Data Capture To scan a bar code symbol:

1. Point the scan window at the bar code. 2. Press the scan key. A blue-violet spot illuminates the symbol, which is captured and decoded. If the scan has been successful:

yy yy yy yy The good read indicator positioned at the top left side of the display glows green constantly. If enabled, the good read beep plays. If enabled, the GreenSpot projects a green spot onto the bar code image. CAUTION CAUTION NOTE NOTE 2. Insert the battery pack into the slot, bottom first, and press it into place:

3. Rotate the latches to the lock position to lock the cover:

Charging Instructions The battery pack is not initially fully charged. After installing the battery, charge it with the USB Type-C or with a dock (single slot dock, 3-slot dock, vehicle dock, 4-slot battery charger). During the charging process the charging LED positioned at the top left side of the display glows red constantly. Once the charging process has been completed, the charging LED glows green constantly. Charge with USB Use the provided USB Type-C cable in conjunction with the power supply adapter (p/n 94ACC0196) to charge the device from a power outlet. The charger is modular, with one adapter and five switchover plugs. You can also use the USB cable to charge the Memor 10 from any self-powered USB hub or USB port on a computer. Use only the Datalogic power supply 94ACC0196 to power the Memor 10. CAUTION