OPERATION MANUAL 1 4.2.3.1 Actual altitude 4.2.3.2 Home altitude 2.2.1 Mounting of battery 2.2.2 Update 2.2.3 Connecting the sensors 2.2.4 Set the circumference 2.2.5 Go cycling 2.1.1 Cockpit handlebar bracket 2.1.2 Handlebar bracket 2.1.3 Adapter 2.1.4 Speedsensor 2.1.5 Cadence sensor 2.1.6 Spoke magnet 2.1.7 Cadence magnet 2.1.8 Heartrate belt TABLE OF CONTENTS 1. Foreword 2. First steps 2.1 Mounting 2.2 Before you start 3. Operations 4. Menu 4.1 Start 4.2 Short menue 4.2.1 Profiles 4.2.2 Sensors 4.2.3 Altitude 4.2.4 Cellphone connection 4.3 Historie 4.4 Setting 5 CicloApp & Komoot 5.1 CicloApp 5.2 Komoot App 5.3 Android insert 6 Solving problems 6.1 Elimination of interferences 6.2 Sending the HAC 1.x for service/repair 6.3 Warranty 6.4 Warranty card 6.5 Technical datas 4.4.1 General 4.4.2 Profiles 4.4.3 Display 4.4.4 Device 6.1.1 Wrong datas 6.1.2 No speed/cadence or heartrate 6.1.3 Speed is wrong 6.1.4 Altitude is wrong 6.1.5 Heartrate is wrong or not shown 6.1.6 Altitude changes although I am not moving 4.4.1.1 Language 4.4.1.2 Units 4.4.1.3 Intervall 4.4.1.4 Display 4.4.1.5 Weight 4.4.1.6 Tones 4.4.1.7 Date 4.4.1.8 Time 4.4.2.1 Name 4.4.2.2 Wheel circumference 4.4.2.3 Wheel weight 4.4.2.4 Zones 4.4.4.1 Version 4.4.4.2 Memory 4.4.4.3 Reset 4.4.4.4 Factory settings 3 3 3 3 3 3 3 3 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 6 6 6 6 6 7 7 7 7 7 7 7 7 7 7 8 8 4.4.1.4.1 Contrast 4.4.1.4.2 Light MGR DELIVERY HAC 1.2 / HAC 1.2+
1 Hac 1.2 Cycling Computer 2 Cockpit handlebar bracket 3 Handlebar bracket 4 Adapter 5 Speedsensor 6 Cadence sensor *
7 Heartrate belt *
8 Mounting material 9 Quick start guide J Komoot code (not shown)
*Only in HAC 1.2+
7 8 3 5 6 4 8 9 1 8 2 8 KURZANLEITUNG SHORTMANUAL 2 KA_HAC_65x115_240518.indd 1 24.05.18 17:17 1.FOREWORD 2. FIRST STEPS Thank you for buying the HAC1.2/HAC1.2+ from Ciclo-
sports. A modern cycling computer provides more than showing speed or altitude. The HAC1.2/HAC1.2+ offers more than a normal cycling computer an intuitive user friendliness. It is distinguished by a navigation app which was realized by Komoot. The navigation can be paired and synchro-
nized with the Komoot App from your Smartphone. This can make your cycling exciting and eventful. 2.1 MOUNTING 2.1.1 COCKPIT HANDLEBAR BRACKET Loosen the screw of the bracket with the allen key. Be careful not to lose a part. Take one of the rubbers and place it on the handlebar. Open the cockpit handlebar bracket and fix it at the desired place. Tighten the screw with the allen key hand tight. 2.1.2 HANDLEBAR BRACKET You can mount the handlebar bracket at the handlebar or stem. Pull off the adhesive protection and fix the rubber on the bottom side of the handlebar bracket. Pass the cable ties through the eyelets of the handlebar bracket and place it on the handlebar or stem. Press the handlebar bracket down and tighten the cable ties. You can cut the over standing cable ties with a scissor or a side cutter. If you like to mount the with the rubber o-rings you have to fix those at the holding noses. 2.1.3 ADAPTER Please press the adapter into the holder of the handle-
bar- or cockpit handlebar bracket. You can also mount the adapter if It is turned around in 90 to fix the handlebar bracket to the stem. 2.1.4 SPEEDSENSOR Attach the transmitter to the fork or the left chain stay. Pull the cable ties through the eyelets of the transmitter, place it in the desired location and tighten the cable ties. The ends of the cable ties can be cut off with a clipper or scissors. 2.1.5 CADENCE SENSOR Attach the cadence sensor on the chain stay towards the middle of the crank (please do not tighten the cable ties at once). Fix the cadence Magnet on the crank with a distance of a maximum of 3 mm to the cadence sen-
sor. After you have initialised/ paired the cadence sensor to the HAC1.x you can tighten the cable ties. 2.1.6 SPOKE MAGNET Attach the magnet to a spoke on the opposing of the transmitter. Please note that the distance between the sensor and the magnet shall not be more than 3mm. Please make sure to align the magnet on the markings on the sensor. 2.1.7 CADENCE MAGNET The cadence magnet can be mounted with a cable ties to the crank. The distance to the Cadence sensor can be up to 3mm. Please make sure to align the magnet on the markings on the sensor. 3 2.2.3 CONNECT SENSORS To connect the sensors please go to the short menu and choose the sensors you want to initialize/pair. For example choose the speedsensor, press the middle but-
ton and turn your front wheel. As soon as the signal is received by the HAC1.x ( the speedsensor is initialized) you will get a confirmation on the device. 2.2.4 SETTING CIRCUMFERENCE Set the circumference of you wheel at Settings Profile Circumference 2.2.5 START CYCLING Choose Start in the main menu and enjoy the first ride with the HAC1.x 3 INSTRUCTIONS LO RO LT MT RT LO = button top left RO = button top right LT = left button MT = middle button RT = right button Important instructions Switch on/off press LO for 4 seconds Start recording press LO for 1 second
(out of functional view) Change to functional view press LO for short Back to last view press RO for short Change to main menu v press RO for 3 seconds LT = step down in menu RT = step up in menu MT = choose the menu point 2.1.8 HEARTRATE BELT Every person who carries out sport should have a general medical checkup on his/her general state of health Especially beginners, persons older than 35 years of age and anyone who has suffered from illnesses or injuries in the past. It is recommended that a doctor is consulted in case of risk factors, such as smoking, high blood pressure, high cholesterol values, diabetes, lack of exercise and excess weight. Pacemaker wearers should consult their doctor before using any heart rate measurement device!
Moisten the contacts on the harness and attach the transmitter belt. The chest strap should be worn cen-
tered just below the nipples. A measurement of the heartbeat is possible if
- the heartrate belt is worn correctly
- the battery is full
- the heartrate sensor is paired/initialiced correctly 2.2 BEFORE YOU START 2.2.1 INSTALLATION OF THE BATTERY Please open the battery cover with a coin. Insert the battery CR2450, positive pole upwards. Now you can close the battery cover. 2.2.2 UPDATE As we improve our products continuously (you can send suggestions to us) we recommend to update your device before the first usage. This also helps you to find out the basic functions of the product. Please follow the steps for an update:
- please download the CicloApp (QR-Code)
- open the app and follow the instructions
- to connect a device to the CicloApp please choose device( left side ) and activate searching
- open the short menu in the HAC1.2, choose cell phone connection and press the middle button
- both devices are in the mode searching
- as soon as both devices have recognized each other you can see the Smartphone name in the HAC1.2 and the HAC 1.2 named in the CicloApp
- now you can do the update
- as soon as both devices have recognized each other you can see the Smartphone named in the HAC1.2 and the HAC 1.2 named in the CicloApp
- now you can do the update 4 4 MENU In the following part every point of the menu will be explained 4.1 START Via the Start menu you get to the cycling mode. Here you can see the Function view and the Navigation view 4.2 SHORT MENU In the short menu you can do the most important settings in a short time 4.2.1 PROFILE Here you can change the actual profiles. Please be aware that your computer knows the used profile by checking the used sensors (for an automatical recogni-
tion of a profil a sensor for each profile must be paired) This does not apply for heartrate sensors. 4.2.2 SENSOREN Here you can pair/initialize sensors with your HAC1.x. You can choose a sensor like speedsensor or you can choose a search for all sensors. As you choose all the HAC1.x will search for all sensors which can be found. You can pair the following sensors to the HAC1.x:
- Speedsensor
- Cadence sensor
- Heartrate belt
- Combined speed/cadence sensor
- Power measurement sensor 4.2.3 ALTITUDE Here you can set the actual altitude 4.2.3.1 ALTITUTE 4.2.3.2 HOME ALTITUDE Here you can store the altitude of the normal starting point of your training sessions. 4.2.4 CELLPHONE CONNECTION Here you can connect youre Smartphone (with BLE, Bluetooth Low Energy) to the HAC1.x. This has to be done if you like to use your HAC 1.x together with the Komoot or CicloApp. 4.3 HISTORIE Here you can see an overview of your recording. You can choose a recording to see basic data. You can transfer your recording to the CicloApp and then get a link to download the tour. If you possess an account at Ciclosport your recording can be stored on the CicloApp. 4.4 SETTING 4.4.1 GENERAL Here you can make the general settings that are not profile-related. 4.4.1.1 LANGUAGE Here you can change the system language of the device. 4.4.1.2 UNITS Here you can set the unit of measurement to be used in the computer. 4.4.1.3 INTERVALL Here you can define the interval for recording the val-
ues. If you choose a smaller interval time the recording size will be bigger which means the memory will be full faster!
Intervals in seconds:
1 2 5 10 30 1min 4.4.1.4 DISPLAY 4.4.1.4.1 CONTRAST Here you can set the display contrast. 4.4.1.4.2 LIGHT MGR Here you can set the light manager. Off - light never goes on Auto - light goes on when the middle, left or right button is pressed for 3 sec, light stays on 5 seconds on. On - always on Attention! Lighting significantly reduces battery life 4.4.1.5 WEIGHT Here you can set your current weight. (Necessary for the calculation of the calculated power measurement) 4.4.1.6 TONES Here you can activate the tones during navigation. If the tones are activated, you will hear a signal tone before each navigation change. 4.4.1.7 DATE Here you can set the date. 4.4.1.8 TIME Here you can set the time. 4.4.2 PROFILES Here you can choose which profile you would like to change. The changed values are saved per profile. 4.4.2.1 NAME Here you can change the name of the profile. e.g. MTB or road bike 5 4.4.2.2 WHEEL CIRCUMFERENCE Here you can adjust the wheel circumference. Circum-
4.4.4.3 RESET Here you can set all stored values to 0. Records and ference mm appears in the display Set with the left and right buttons. Press the middle button to confirm the setting and the unit switches to the next menu item. Note: The wheel circumference can be taken from the table or measured by yourself. 26 x 1,5 26 x 1,6 26 x 1,75 26 x 1,9 26 x 2,00 26 x 2,125 26 x 1 3/8 27 x 1 1/4 28 x 1,5 28 x 1,75 28 x 1 1/2 28 x 1 3/8 700 x 20C 700 x 23C 700 x 25C 700 x 28C 700 x 32C Circumferance 2026 mm 2051 mm 2070 mm 2026 mm 2089 mm 2114 mm 2133 mm 2199 mm 2224 mm 2268 mm 2265 mm 2205 mm 2114 mm 2133 mm 2146 mm 2149 mm 2174 mm Tire-size 40-559 44-559 47-559 50-559 54-559 57-559 37-590 32-620 40-622 47-622 40-635 37-622 20-622 23-622 25-622 28-622 32-622 If you want to measure the wheel circumference yourself, place a mark on the front tyre (e.g. with chalk) on the ground. Then go straight ahead with your bike, exactly one turn of the wheel (with the correct air pressure and rider weight) and mark the spot on the ground. Now the exact wheel circumference between the two markings on the ground can be measured (in mm). 4.4.2.3 WHEEL WEIGHT Here you can enter your bike weight, this helps in the power measurement calculation. 4.4.2.4 ZONES Here you can change the values for the lower, upper and maximum heart rate limit. 4.4.3 DISPLAY In this menu you can change the function views. Up to 8 views can be configured. For each display you can determine how many functions
(1 to 8) you would like to display. Now you can select the individual windows and select the desired function from the list. 4.4.4 DEVICE Here you can see the current software version of your 4.4.4.1 VERSION device. 4.4.4.2 MEMORY Here you can see the current memory allocation on the device. 6 settings are saved. 4.4.4.4 FACTORY SETTINGS Here you can reset the device to factory settings. 5 CICLOAPP & KOMOOT 5.1 CICLO APP
- Install the Ciclo App
- You can use the app with or without registration, but without registration your routes will not be taken save
- Activate Bluetooth on your smartphone
- Synchronize switch HAC 1.2 on short men Telefon
- Automatic connection visible HAC in the Select App
- Latest version select on app visible HAC update NFC Function:
You can also use the NFC technologie in your device to connect your HAC to the CicloApp. For this please go to the shortmenu and search for a telephone. Then put the HAC onto the display of your NFC compatible smartphone while the CicloApp is open. The CicloApp will automatically connect your HAC to the Phone. 5.2 KOMOOT APP
- Install the Komoot app on your smartphone and log in
- Go to your profile to Settings to activate Bluetooth con-
nect
- Turn on the HAC press and hold LO for 4 seconds
- In the main menu first RT to Short menu, then MT
- Establish connection with App press RT, at Press Telephone MT
- Start route on the app in the main menu bar on tarpaulins below
- enter your starting position and your destination and go to the click on Start Navigation
- your bike computer automatically shows the direction and your route can begin 5.3 ANDROID & KOMOOT
- Download the Kommot App and Komoot Connect from PlayStore and install them on your smartphone
- please open the app Komoot Connect
- for HAC 1.x, the telephone connection in the active profile enable
- in the Komoot Connect app and wait until the connec-
tion is established (green tick appears)
- Now you can open the Komoot App and start your tours project
- In HAC 1.x after the tour has started the turn-by-turn instructions are displayed by arrow navigation Please enclose the following with the package:
- Copy of invoice
- warranty certificate
- widget Please make sure to prepay the return shipment. We regret that we cannot accept freight collect shipments. Our service address:
Ciclosport Service Lohenstrasse 11 DE - 82166 Graefelfing Germany 6.3 WARRANTY We grant the original purchaser of this product a warran-
ty of 2 years from the date of purchase according to the conditions below. Within this warranty period, we will rectify defects on the device free of charge which can be proven to be due to a material and / or manufacturing defect. Excluded from the warranty are damages caused by improper handling, commercial use or accident / fall. Wear parts and broken housings of the device and the transmitter are also excluded from the warranty. The guarantee is provided, at our discretion, by repair or replacement of defective parts. The warranty does not cover direct or indirect damage or consequential damage in connection with the product. In case of warranty, please contact your dealer or your local distributor or send the computer with the proof of purchase and all accessories sufficiently stamped directly to us. Ciclosport Service Lohenstrasse 11 DE - 82166 Grfelfing Germany E-Mail: ciclo-service@ciclosport.de Please read the operating instructions carefully again be-
fore sending in the device and check the battery. If the warranty claims are justified, the repaired device or a replacement device will be returned free of charge. Repair:
If the device is sent in for repair or if a warranty claim is not accepted, repair will be carried out up to Euro 30 with-
out consultation. 6 SERVICE &
TROUBLESHOOTING Do you have questions or a problem with HAC 1.2 /
HAC 1.2 +?
You can contact us from Monday to Thursday from 9:00 to 16:00 by telephone on +49 (0) 89 - 89 52 70 61. You can also send us an e-mail to:
ciclo-service@ciclosport.de 6.1 TROUBLESHOOTING 6.1.1 FAULTY DISPLAY Check the battery for the following points:
- Voltage > 3.0V
- High quality battery
- If the battery fits correctly 6.1.2 NO SPEED / CADENCE / HEART RATE
- Transmitter not correctly initialized.
- Check that the transmitter is correctly installed
- Check whether the distance between the transmitter and the magnet is 3mm maximum.
- Battery in transmitter reversed for 10 seconds to reset the transmitter to the factory setting. Then repeat the initialization. 6.1.3 SPEED IS NOT DISPLAYED CORRECTLY
- Check adjusted wheel circumference
- Check unit of measurement 6.1.4 HEIGHT SHOWS WRONG VALUES
- Air pressure has changed, here you have to adjust the height manually.
- Home height incorrectly adjusted 6.1.5 HEART RATE NOT DISPLAYED CORRECTLY OR NO DISPLAY
- Check the battery in the chest strap, replace if necessary
- Moisten the contacts on the chest strap 6.1.6 THE HEIGHT CHANGES EVEN THOUGH I AM IN THE SAME PLACE The height measurement of the HAC 1.2 is barometric, which means that the height is measured above the air pressure. If the air pressure changes due to the weather, the height in the computer also changes. Here you can adjust the height via the short menu. 6.2 SENDING IN A DEVICE FOR REPAIR If you wish to return your device for repair, please com-
plete the warranty certificate at the end of the operating instructions. Please always send in the complete product. If the device is sent in for repair or if a warranty claim is not accepted, repair will be carried out up to Euro 30 with-
out consultation. 7 6.4 WARRANTY CERTIFICATE 6.5 TECHNICAL DATA Sender:
Name:
First name:
Street / No:
Postcode / City:
E-Mail:
Product type:
With accessories sent in:
Error description / reason for submission:
After the warranty has expired, repairs should be carried out up to _____________ Euro. Disposal of used electrical and electronic equip-
ment (applicable in the countries of the European Union and other European countries with a separate collection system for these devices). The symbol on the product or its packaging indicates that this product is not to be treated as normal household waste but must be disposed of at a collection point for the recycling of electrical or electronic equipment. By contrib-
uting to the correct disposal of this product, you protect the environment and the health of your fellow human beings. The environment and health are endangered by incorrect disposal. Material recycling helps to reduce the consumption of raw materials. For more information on how to recycle this product, contact your local authority, municipal waste management company or the store where you purchased this product. CR2450 Lithium Operating temperature: 0C to50C Battery:
Transmission frequency Bluetooth:
ANT+:
NFC(receiver):
Max power:
FCC ID:
Model:
2402MHz -2480MHz 2457MHz 13.56MHz BLE : <6dBm , ANT+ :< 0dBm O4GHAC HAC1.2 FCC STATEMENT Caution: If any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, includ-
ing interference that may cause undesired operation. The grantee is not responsible for any changes or modifi-
cations not expressly approved by the party responsible for compliance. Such modifications could void the users authority to operate the equipment. The RF Exposure Compliance distance is 20 millimeters NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursu-
ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gener-
ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter-
ference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV techni-
cian for help. Subject to errors and technical changes. 8