User's manual Product Name Wireless bluetooth headset ModelDS200 Logosmartisan
, Before operating this unit, please read these instructions completely and save them 1. Function Introduction Power On 1 Hold the function button for about 1 second to power on The headset goes into pairing mode.
;
After the first boot, the headset will enter the pairing state by default 3 Press and hold the button in shutdown mode for about 3 seconds to enter pairing mode Pairing and Connect DS200 After the headset enters pairing mode, turn on the phone's bluetooth, search for the device name "DS200" and connect power off 3 2 Long press the function button for 3 seconds, and the red light will turn off after 2 seconds Automatic reconnection When the headset is turned on, it automatically connects to the most recent paired phone Make sure that the bluetooth of the mobile phone is on and the earphone is within the range of effective bluetooth connection Hall magnet switch When the earphone is closed, it disconnects When separated, the earphone automatically reconnects Boot up succesfully 1 White light for 1 second Shutdown success 2 The red light lasts two seconds Indicator light description Paired state Connected state Out of bluetooth connection charging state fully charged Red and white lights flash alternately 1.5 The white light lasts 1.5 seconds 15 3 The red light flashes three times every 15 seconds Long bright red light Long bright white light Low power state 8 1 The red light flashes every 8 seconds 2. specification parameter Bluetooth version 5.0 Bluetooth 5.0 Product Model input parameter bluetooth protocol charging port Product Net Weight DS200 5V 1.0A HFP/HSP/A2DP/AVRCP Type-C 36.5 2g Communication distance 10m / 33Ft Music time Talk time stand-by time charging time battery capacity 16 50%
16 hours(50% volume) 12 50%
12 hours(50% volume) 170 170 hours 1.5 1.5 hours 3.7V 120mAh 20Hz-20KHz frequency response 3. Attention Do not use the equipment where it is dusty, damp, dirty or near the magnetic field, for fear of causing internal circuit failure. Do not use the equipment in too high temperature or too low environment, which may cause the failure of the equipment. Do not put the equipment near a source of heat or exposed fire, such as electric heaters, microwave ovens, ovens, water heaters, fires, candles or other places that may produce high temperatures. When you use earphones to listen to music or call, it is recommended to use music or the minimum volume required for the call, so as to avoid hearing damage. Prolonged exposure to high volume may cause permanent hearing damage. Driving at high volume can be distracting and can lead to accidents. Wireless devices may interfere with the aircraft's flight system. Please follow the relevant rules of the airline. Do not use wireless devices where they are prohibited. The equipment and its accessories may contain some small parts. Please place the equipment and its accessories out of the reach of children. Children may damage the equipment and its accessories unintentionally, or swallow small parts by mistake, causing suffocation or other hazards. When charging the device, the power socket should be installed near the device and should be easily accessible. Disconnect the charger from the device and unplug the charger from the power socket when it is fully charged or not charged. 4. Icon 5. Other Description Statement.: this manual is for reference only. The product (including but not limited to color, size, screen display, etc.) shall be subject to the real product. S.M.L*2 M.L*2 Package includes: nut Necklace bluetooth headset, user manual, storage bag, charging cable, ear tips S.M * 2, ear fins m.l* 2 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Warning:
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND INDUSTRY CANADA LICENSE-EXEMPT RSS STANDARD(S). OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. The user manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
(SAMPLE) NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USERS AUTHORITY TO OPERATE THE EQUIPMENT. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed. between the radiator
& your body. The information listed above provides the user with information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio. Industry Canada (IC) Warning:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. French equivalent:
Le prsent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement:
This device is in compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528.