Frigga B9X (Single/Multiple-use) www.friggatech.com Appearance Instruction Device ID Indicator LED Light Hole Platform Address Start/Status Key Stop Key Humidity Hole NoteThe AC codeActivational codeis in the back of device. 1 www.friggatech.com LED Description Battery Battery OK Battery Low Monitoring result Recording status, Signal status Monitoring OK No Alarm Alarm has occurred Recording, and Signal OK Recording but No Signal www.friggatech.com 2 Instructions In order to better experience the real-time monitoring (temperature and humidity, location, track routes), real-time alarm (SMS, email) of Frigga wireless temperature recorder, please register your business account on Frigga cloud platform official website (cloud.friggatech.com) and then add the device ID to your account before starting the device. 1. Start Long press "Start/stop" button till REC has been showed on the LCD interface, device is ready to monitor. At the same time, the record quantity also will be showed on the LCD interface.
(Using default thresholds or change the thresholds via Frigga cloud platform). 3 www.friggatech.com 2. Setting Thresholds can be changed via cloud platform. On the page Device Setting, we can:
Change the temperature thresholds. Add alarm notification personnel. Share equipment to someone. Setting position notification. Set up automatic flight mode. 3. Transport Put the device into the goods and begin to transport. www.friggatech.com 4 4. Monitoring Whether you set up the device or not, you also can monitor the temperature, humidity, location, route through Frigga cloud platform. When the temperature is over limit, the cloud platform will notify the relevant person by mail or SMS. Notify the presupposed person when the device reaches the designated location. When the device arrives near the designated airport, the device will enter the flight mode automatically. 5 www.friggatech.com 5. Stop Three ways to end journey:
Long press Start/Stop button till REC disappear from LCD interface, the device has been stopped. Connect with the computer through a USB cable and then export the PDF report from device. Via cloud platform, inform the device to stop, and the device will respond within one reporting interval in a good signal environment. www.friggatech.com 6 6. Report When stop record data, device will generate PDF report automatically. Via USB cable connect with PC, can access it directly. On the Frigga cloud platform, the whole transportation data will be backed up, and can be viewed through device ID. 7 www.friggatech.com Cautions Please read the following notes carefully before using:
When you find that the device dont upload the data to cloud, Please confirm that the device is working properly or whether the device is in flight mode. Please confirm that the device is working in the range of measurement. Dont use external force to impact the device. Dont take apart the device by yourself. Please keep the device away from fire. Dont put the device into liquid. www.friggatech.com 8 Salute Extraordinary Technical Support: support@dewav.com www.friggatech.com FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm from your body.