Information to the user NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 1. Product Composition The accessories may look different from the image shown here and subject to change without prior notice. Main Composition FL400, Earphones, Mini USB, USB Extension Cable, Clip, Manual (or Quick Start Guide), CD, Warranty Card Optional Accessories Necklace, Arm-Band, Case 2. Controls Overview Earphone & USB Reset Mic 3. Information during playback on LCD Current track/All tracks Status Folder name Current time LCD Window Control Button Repeat EQ Remained battery Music information Playback time 2. Before you Use 2.1 Connecting to the PC Connect the player to the PC USB port using the USB cable.
! If you use Windows 98/98SE, you should install Windows 98 driver first before connecting the player to the PC.
* Windows ME, Windows 2000, and Windows XP operating system supports USB 2.0 or 1.1 storage device by default. Therefore, the player will be automatically recognized as a moveable disc without installing the driver. Once connected, you can use the player right away. 2.2 Saving music and data file
!!! Illegal download or duplication of MP3 files protected by the copyright is prohibited by law. This product bears any responsibility on the issues related with the copyright.
* Using as a removeable disc Connect the player to the PC using the USB cable. Check the USB Connected message on the product LCD window. Open the Windows Explorer in your PC. Your computer will recognize FL400 as a removeable disc.
(You can check it in My Computer.) You can save/delete the data, or create a folder using the same method as you handle the computer hard disk.
(Save the data using or method as described below.) Copy and paste:
Select the data to save and click the right mouse button. Then, select the Copy menu and paste the data in a moveable disc. Drag and drop:
Select the data to save and drag it while holding down the left mouse button, and release the button on the moveable disc that was automatically recognized. Then, the selected data will be saved in a moveable disc. 2.3 Disconnecting the Player from the PC It is important to follow this procedure to disconnect the USB cable from your player and the PC. If you dont, you risk losing files as they are transferring to your player. 1. Click the USB icon on the Windows taskbar usually located at the bottom right of the desktop. 2. From the popup menu, select the Stop command. 3. After a notification message displays, you may disconnect the cable from the player. Windows 98 user
- Windows 98 does not provide any command that enables to disconnect the player from the PC safely. Therefore, check the data transfer status before disconnecting the player from the PC. 3. Learning Basic Usage 3.1 Battery charging
- The product battery can be re-charged by power supply through the PC USB terminal. Remove the Necklace-earphone and Connect the Mini USB to FL400. Extend the connection by usage of USB Extension cable. Connect the other end of the USB cable to the USB cable connection terminal located at the left side of the player(PC). 3.2 Power On (Play)/Off (Stop) When you press the turned on and the file list will be shown. button longer, the logo screen will appear and then, the power is button. To turn it off, press and hold the Playing back previous/next file Push button or button during playback to play the previous or next file.
* If you push button within 10 seconds after file playback, the beginning of the current file will be played back.
* If you push button after 10 seconds from file playback, the previous file will be played back. Fast Forward/ Fast Rewind function If you push and hold If you push and hold
(right) button , the player performs the fast forward function.
(left) button , the player performs the fast rewind function. button to pause. button again to resume playback. Pause/ Releasing pause During playback, press the Press the 3.4 Navigation
(1) Navigating music files during playback or while paused Press the MENU button shortly to switch to the file list screen from playback or pause screen. Push + or button to move to the target file. To move to the sub-folder, push the To move to the upper folder, push the button or press the button. button.
(2) Navigation for playback Press the MENU button shortly, Display on LCD switches playback to file list status. button or press the You can move between files by pushing + or button To move to the sub-folder, push the To move to the upper folder, push the 3.5 Controlling Volumes Volume up: Push the + button. Volume down: Push the - button.
* Volume levels: 0 ~ 40 button. button. 4. Switching the Mode (Listen to Music <-> Listen to FM Radio) If you press the MENU button longer in playback or pause status, you can switch to MP3, FM Radio, Voice mode by using mode menu. Press the MENU button longer in playback or pause status. Push +/- button to move intended menu and choose mode. Push the MENU button shortly and change the mode by using + or button.
(Figure1. Example in changing to Radio mode from Mp3 playback) 5. Listening to FM radio Press the MENU button longer in the playback or pause status, or during navigation. Push the + or - button to move to the mode menu and then, push the MENU shortly to enter the mode-change. Choose the Radio and change the mode. You can find the frequency by pushing the stick to directions. or or or directions. button, the frequency will change automatically to good receiving.
(1) Switching between channel mode and scan mode You can switch the reception mode of FM (channel <->scan) by pressing the MENU button. Scan Mode You can change to receiving frequency by pushing the stick Auto Scan Function Push and hold the Channel Mode If you choose the ON at Auto Preset setting in Radio menu, the player will scan and save all possible broadcasting frequency automatically. After that, you can listen to radio in channel mode. You can move to channels that saved frequency by pushing the
(2) Saving Channel This is a function that saves the received frequency in channel during scan mode. You can save frequencies up to 20 channels button. or
<In FM radio mode>
Change to receiving frequency by pushing the choose the channel to save. or button and button, the list window will appear. When you press the Push the + or button to move channel number and push the channel.
(3) Recording FM radio You can record the receiving FM radio. Change To FM radio mode Change to receiving frequency by pushing the or button and button to save the choose the channel to record. Choose Recorder in mode menu, then the player start recording. button. To finish the recording, press the
* The FM radio recorded files are stored in the RECORD folder by the file name of FM001.mp3, FM002.mp3 etc. 6. Recording Voice Press the MENU button longer in the playback or pause status, or during navigation. Push the +or button to move to the mode menu Push the MENU button to enter in the mode menu, and then choose the Recorder. To start recording the voice, press the button. To finish the recording, press the
* The voice recorded files are stored in the RECORD folder by the file name of VOICE 001.MP3, VOICE002.MP3 etc. button. 7. Technical Specification Dimensions Weight LCD Internal Memory Decoding Format Voice Recording Audio FM Radio Frequency Range S/N ratio Output Power Frequency Band Language PC Interface S/N ratio FM Recording Menu language ID 3 Tag language PC Interface File Transfer Rate Supported OS 46 x 28 x 13mm 25.5g 1" (128 x 48, White FSTN) 256/ 512MB / 1GB / 2GB MPEG 1/2/2.5 Layer3, WMA(PD DRM),OGG,(Q1~Q10) MP3 20Hz ~ 20kHz 90dB 15mW/Channl (EU : 6mW/Channel) 87.5MHz ~108MHz(Kor,USA,EU) 76 MHz ~ 102MHz(Japan) 50dB MP3 English, Korean, Traditional Chinese, Simplified Chinese, Japanese, 55 languages USB 2.0 Approx. 16Mbps Windows 98SE/ME/2000/XP Mac 9.2.2 ~
Mass Storage Class Operating Temperature O
-5 ~ 40
* Actual usable capacity can be changed via the logic file system regardless of the physical capacity of FL400.
* The warranty does not cover PC connections with the use of extended cords like the USB hub, etc.
* Data transfer rate may vary depending on the computer systems.
* Battery Life may vary depending on the usage, configuration and condition. 8. Computer system requirements
(1) PC System: USB Interface (Rev 1.1) standard equipment and built-in CD-ROM driver CPU: Pentium 133 MHz or higher Memory: 64MB or higher Hard disk space: 20MB or higher Operating system: Windows 98/Me/2000/XP
(2) Macintosh System: USB Interface (Rev V1.1) standard equipment and built-in CD-ROM driver EX) Power Mac G3(Blue & White)/G4/G4 Cube, iMac/iBook, Powerbook, Powerbook G4 Memory : 64MB or higher Hard disk space : 20MB or higher Operating system : MacOS 8.62~9.2, MacOS X(10.1)(iTunes 2,3,4 Plug-In)M PC
* The warranty does not cover PC connections with the use of extended cords like the USB hub, etc.