FCC ID: X8JGATEWAREFVS RFID & Biometrics System

WokerWoker--Attandance Device of Construction Site Attandance Device of Construction Site RFID&Biometrics RFID&Biometrics RFID&Biometrics RFID&Biometrics SystemSystem SystemSystem Gateware Gateware--FVSFVS Gateware Gateware--FVSFVS ver. ver. 1.01.0 ver. ver. 1.01.0 User Manual User Manual User Manual User Manual GATEWARE-EM Doalltech Contents User Manual User Manual l l l l Matters that require attention Matters that require attention Product Explanation Product Explanation

----------------- 3

----------------- 3

----------------- 6

----------------- 6 1. 1. Starting Starting l l l l l l 1. Check of the supply items 1. Check of the supply items 2. Installation method 2. Installation method 3. Each part Name & Function of the Device 3. Each part Name & Function of the Device

----------------- 7

----------------- 7

----------------- 8

----------------- 8

---- 9

---- 9 2. 2. System setting System setting l l l l l l l l l l l l l l l l l l l l l l l l l l Explanation of the Screen UI Explanation of the Screen UI Explanation of the keypad control Explanation of the keypad control Menu Control - Enter Menu Control - Enter Menu Control Select the item Menu Control Select the item Menu Control Check the status Menu Control Check the status Menu Control Default setting Menu Control Default setting Menu Control Serial pot setting Menu Control Serial pot setting Menu Control Relay setting Menu Control Relay setting Menu Control Special setting Menu Control Special setting LAN Setting LAN Setting USB setting USB setting Time setting Time setting Password setting Password setting

---------------- 11

---------------- 11

---------------- 12

---------------- 12

---------------- 15

---------------- 15

---------------- 16

---------------- 16

---------------- 17

---------------- 17

---------------- 18

---------------- 18

---------------- 19

---------------- 19

---------------- 20

---------------- 20

---------------- 21

---------------- 21

---------------- 22

---------------- 22

---------------- 23

---------------- 23

---------------- 24

---------------- 24

---------------- 25

---------------- 25 3. 3. Reference Reference l l l l l l l l l l l l l l l l External Interlocking device Turn-Gate External Interlocking device Turn-Gate External Interlocking device Items External Interlocking device Items Additional Function Additional Function FAQ FAQ Before A/S Request Before A/S Request Product Size Product Size FCC RF INTERFERENCE STATEMENT FCC RF INTERFERENCE STATEMENT Additional charge item Additional charge item

--------- 26

--------- 26

-------------- 27

-------------- 27

---------------- 28

---------------- 28

---------------- 30

---------------- 30

---------------- 32

---------------- 32

---------------- 38

---------------- 38

-------------- 39

-------------- 39 C o n t e n t s h s i l g n E 2 GATEWARE-EM Doalltech Matters that require attention Sign explanation, Power supply Sign explanation v Please read this manual and keep the using method because for prot ecting risks or damages on property by using the product correctly. warning caution l This is composed of contents on the possibility of death or serious wound in case of violating instructions. l If violate the instruction, you are vulnerable to wounds or occurrence of property loss. Power supply Power supply warning Please plug into correct place In case of unstable situation, it causes fire or electronic shock Dont touch the Power supply with wet hand It causes fire or electronic shock W W a a r r n n I I n n g g

C C a a u u t t I I o o n n E n g l i s h Reference Theses images are just for reference. It can be different from real product appearance 3 GATEWARE-EM Doalltech W W a a r r n n I I n n g g

C C a a u u t t I I o o n n h s i l g n E Matters that require attention warning Please dont use a damaged plug or loose outlet It causes fire & electronic shock Please do not use a lot of plugs into one outlet. Please do not use a lot of plugs into one outlet. It causes a fire owing to abnormal heat of the It causes a fire owing to abnormal heat of the outlet. outlet. Dont press the power line with heavy things and bend forcibly or pull it. It causes fire & electronic shock When moving the product, please turn down the switch certainly and then move it after taking out external cable. It causes fire & electronic shock 4 Reference Theses images are just for reference. It can be different from real product appearance GATEWARE-EM Doalltech Matters that require attention caution Dont make DC Power supply (Adapter) device wet & keep away from water It causes fire & electronic shock Dont put the Power supply device or Power supply wire around heater. It causes fire When you pull out Power supply plug, please use only plug which is not wire. It causes wire problem it causes power switch problem or fire when Thunderstorm or lightening situation, please pull out the power supply plug It causes electric shock and fire appliances a bnormality. W W a a r r n n I I n n g g

C C a a u u t t I I o o n n E n g l i s h Reference Theses images are just for reference. It can be different from real product appearance 5 GATEWARE-EM Doalltech Product summary S t a r t h s i l g n E 1. 1. 2. 2. 3. 3. Summary Summary l l l l l l The entry control management using The entry control management using RFID card & Finger Vein Pattern. RFID card & Finger Vein Pattern. Real-time confirmation on the entry situation Real-time confirmation on the entry situation It stores output data of workers and has transmi It stores output data of workers and has transmi tting function to remote- place server by using tting function to remote- place server by using network network Feature Feature l l Photographing, external camera input, image ou Photographing, external camera input, image ou tput, external RFID device input, external RS-232 tput, external RFID device input, external RS-232 device input, sensor input and relay output are device input, sensor input and relay output are available by connecting with various external de available by connecting with various external de vices. vices. Interlockable External device Interlockable External device l l l l l l l l CCTV Camera, TV Monitor CCTV Camera, TV Monitor Turnstile Gate, Automatic door Turnstile Gate, Automatic door Crossing barrier,Eletric sign,Flash light and so on Crossing barrier,Eletric sign,Flash light and so on 13.56Mhz RFID Reader, Finger Vein Reader 13.56Mhz RFID Reader, Finger Vein Reader 6 Reference Product appearance& specification can be changed for high quality improvement GATEWARE-EM Doalltech A A d d v v

. p p r r e e p p a a r r a a t t I I o o n n s s h s i l g n E 1. Composition item check Gateware FVS Main body Main body holder Gateware FVS Main body Main body holder Main body Adapter Main body Adapter Main body Key Main body Key SD Memory USB Memory User Description SD Memory USB Memory User Description 7 Reference Picture size of each item can be different from real product size,, Some part items can be changed depending on the situation. GATEWARE-EM Doalltech 2. Installation method Holder Holder Holder Back of the Gateware device EX) In case of installing at gate guard post Please confirm the installation position after matching up per end of the fixing board and eye level of the worker. Please install the fixing board to installation position by using steel plate screw. Hang it by fitting back bolt of the equipment and fixing hole. A A d d v v

. p p r r e e p p a a r r a a t t I I o o n n s s E n g l i s h Reference Install to fix the holder 8 GATEWARE-EM Doalltech A A d d v v

. p p r r e e p p a a r r a a t t I I o o n n s s h s i l g n E 3. Each part name & function (Front) FRONT FRONT 1 2 3 4 4 6 5 7 7 Each part name Function 1.Camera 2.FLASH 3.LCD When workers scan the card,it takes a photo Flash is working as the Time zone of User setting for card check Camera view & Product status(Reference to 7page) 4.RFID REGISTER Card check part for worker attendance 5.Status LED LED shows depending on the Product status 6.Finger Vein Register Finger Vein check part for worker attendance 7.KEY PAD Use Key pad when user set the product setting 9 Reference This image is just for reference. So it can be different from real situation Product appearance& specification can be changed for high quality improvement GATEWARE-EM Doalltech A A d d v v

. p p r r e e p p a a r r a a t t I I o o n n s s E n g l i s h 3. Each part name & function(Bottom) BOTTOM BOTTOM 1 2 3 4 5 6 7 8 9 Each part name Each part name Function Function 1.ON/OFF 2.PWR 3.RESET 4.Screen in/output terminal 5.SPEAKER output terminal 6.SERIAL PORT 7.LAN PORT 8.Signal in/output terminal 9.USB PORT Product ON/OFF button Connection terminal of Power supply Adapter Product default setting Installation pot of Additional camera

(Reference to 14page) Installation pot of Additional speaker

(Reference to 14page) Installation pot of Additional RFID READER, Finger Vein Reader.

(Reference to 9, 14page) Internet connection Pot Installation Pot of RELAY,SENSOR

(Reference to 14page) USB connection Pot Reference This image is just for reference. So it can be different from real situation Product appearance& specification can be changed for high quality improvement 10 Doalltech GATEWARE-EM S c r e e n U I h s i l g n E 1 2 3 4 Screen UI Explanation 5 6 7 8 8 Company name, construction work, type of occupations, name and information of the card number are marked after card rec ognitions. The resident registration number is showed in case of setting k eypad input. In case of occurring power supply, network and other errors, th e contents will be appeared. During Menu setting mode, key pad instruction is displayed Current year, month, day, day of the week are displayed Current Time is displayed USB Memory,SD Card Memory connection status are displayed Power supply status is displayed Charging quantity and using time will be appeared in case of battery mode. 11 Reference This image is just for reference. So it can be different from real situation Screen & Menu function can be changed for high quality improvement GATEWARE-EM Doalltech Keypad control explanation Save Save K K e e y y p p a a d d C C o o n n t t r r o o l l MENU MENU This displays button Menu. Setting Menu is displayed in the default screen. In t he Setting menu, please move with the Save button 2 1 E n g l i s h ESC This makes get out of current screen. ESC F1

(HELP) F1 This makes display Help word expressio n or move previous screen. Usage method is marked at the message windo w where the Help word is required. Move to previous screen in Menu setting screen. Th e focus moves to flash starting Time when located at flash end Time. 3 Reference This image is just for reference. So it can be different from real situation Screen & Menu function can be changed for high quality improvement 12 Doalltech GATEWARE-EM K K e e y y p p a a d d C C o o n n t t r r o o l l h s i l g n E Keypad control explanation Save Save SHIFT SHIFT This makes the button to next stage. The focus moves to the position of flash end Ti me when locating in flash start Time. DEL DEL This deletes box contents of button text. When there is not contents to be deleted on the IP input text box, this makes movement to previ ous text. ENT ENT Input the figure of button selection. In the Save button, this makes movement to Me nu selection page after saving data. In the list box, select previous item. 1 32 13 Reference This image is just for reference. So it can be different from real situation Screen & Menu function can be changed for high quality improvement GATEWARE-EM Doalltech Keypad control explanation Save Save When inputting Keypad 1~0 in Menu setting text box, you can input In main screen, Keypad 2,4 button :

8 2 Controlling Volume up & down K K e e y y p p a a d d C C o o n n t t r r o o l l E n g l i s h In main screen, Keypad 4,6 button 6 4 Controlling Screen brightness 4 In project Code, Keypad 4,6 button 6 6 Changing English code. Number key 4 Number key 6 Changing English code A to Z Changing English code A to B 4 6 Reference This image is just for reference. So it can be different from real situation Screen & Menu function can be changed for high quality improvement 14 Doalltech GATEWARE-EM E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g h s i l g n E 1. Menu setting Enter the Menu This is Main Screen. Camera image is displayed Push the MENU button MENU Password prompt is displayed After pushing the Password + ENTER , ENT you can see the Product setting Menu 15 Reference This image is just for reference. So it can be different from real situation Screen & Menu function can be changed for high quality improvement

* Password The first password is 0000 GATEWARE-EM Doalltech 2. Setting Menu Selecting item 1. Setting view 2. Default setting 3. Serial Pot setting 4. Relay setting 5. Special setting ENTER next page Menu2 6. LAN setting 7. USB use 8. Time setting 9. password setting ENTER next page This is product setting Menu page If you push the ENTER button, you can move to next page ENT Menu2 This is low Menu of the Product setting If you push the ENTER button, you can move to next page ENT Select the Menu by key pad to move E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g E n g l i s h Reference This image is just for reference. So it can be different from real situation Screen & Menu function can be changed for high quality improvement 16 Doalltech GATEWARE-EM E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g h s i l g n E 3. Menu setting Status check DHCP 1 Channel IP use status network status info. Device Status info, Project codeIBDD2008 IP Address 192.168.1.100 Attendance IN/OUT Camera use Default Gateway 192.168.1.1 Pot1 13.56Mhz Subnet Mask 255.255.255.0 Pot2 Not Use DNS 1 168.126.63.1 Pot3 Not Use DNS 2 168.126.63.2 Pot4 Not Use Relay1 Not Use Relay2 Not Use Relay3 Not Use Relay4 Not Use Flash start 16 Flash end 09 Current system status is displayed If u push the ESC button, ESC u can return to Menu selection screen 17 Reference This image is just for reference. So it can be different from real situation Screen & Menu function can be changed for high quality improvement GATEWARE-EM Doalltech E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g E n g l i s h 4. Menu setting - Default setting Device Default setting Project code IBDD2008 Input data in English Device number 1 Attendance IN/OUT Camera use 1 Channel Save Default setting Screen of the Product Enter the project code When inputting English in project code, Move to the project code by using SHIFT button. SHIFT ENT ENTER in inputting English. This button is used after changing 4, 6 key of alphabet A indication to English figure. Enter the device number Set the IN/OUT setting Set the Camera setting Push the Save to save setting code If u push the ESC button, you can return to Menu selection Screen Reference Project code English input by enter key / setting number by Keypad number In case Device number site, If device are 2ea ,please input each 1,2 number 18 Doalltech GATEWARE-EM E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g h s i l g n E 5. Menu setting Serial Pot setting Serial Pot setting Pot1 13.56Mhz Pot2 Not Use Pot3 Not Use Pot4 Not Use Save This is setting Screen of the RFID Serial Pot Set the RFID Serial Pot Pot1 is Internal Pot, Pot2,3,4 are External Pot. Set the Additional RFID TYPE. Save the setting If u push the ESC you can return to setting Menu ESC 19 Reference This image is just for reference. So it can be different from real situation Screen & Menu function can be changed for high quality improvement GATEWARE-EM Doalltech 6. Menu setting Relay setting Relay setting Relay1 Allow Port 1 Relay2 Deny Relay3 Not Use Relay4 Not Use Port 1,2 Save Relay setting Screen After selecting the Allow(registration), Set the Pot After selecting Deny(rejection), Not applied even though set the Pot Push the save button for saving setting If you push the ESC button, you can return to setting ESC Menu Reference Allow ,Enrolling card Data input, Relay works in Serial Pot Deny Unenrolled card Data input, Relay works in Serial Pot, E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g E n g l i s h 20 Doalltech GATEWARE-EM E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g h s i l g n E 7. Menu setting Special setting Device special setting Flash Start Time 17 Flash End Time 09 Local Server Keypad input Use short period key input Use Save Flash start Time& End Time setting Enter the IP of Local Server The setting of Keypad input use or not If its possible to enter citizen number without card Short period card setting After card check, citizen number is entered from Short period worker Push the Save to save edit code If u push the ESC button u can move to next ESC page 21 Reference Inputting 24Time way in Flash start Time Example) Start Time PM = 17 , End Time AM 9 = 09 GATEWARE-EM Doalltech 8. Menu setting LAN setting LAN setting change DHCP/STATIC IP ADDRESS SUBNET MASK DEFAULT GATEWAY DNS 1 DNS 2 Save Select the DHCP/STATIC use or not STATIC Application situation, set the IP ADDRESS Set the SUBNET MASK Set the DEFAULT GATEWAY Set the DNS 1 setting Set the DNS 2 setting Push Save button to save setting Code If you push the ESC button, you can return to setting Menu. ESC E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g E n g l i s h Reference

* DHCP Internet connection setting method by IP ADDRESS router (Automatically IP allocation)

* STATIC Internet connection setting method by Direct input of IP ADDRESS 22 Doalltech GATEWARE-EM E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g h s i l g n E 9. Menu setting by using USB USB Data in&output Save worker Data copy to attendance Data USB USB application setting Screen Connect the USB memory to product Save the worker data by pushing the Worker data save button Select the save button to copy worker attendance data to Attendance Data USB by memory stick If you push the ESC button, you can return to setting Menu ESC 23 Reference C/S Version is only available Input output from Gateware folder Data of USB memory GATEWARE-EM Doalltech E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g E n g l i s h 10. Menu setting Time setting Current Time & Time zone setting 2009 year 5 month 14 day 12 hour 15 min 30 sec

(GMT+09:00)Seoul Korea Standard Time Save Enter the current year, month, day Enter the current hour, min, second Select the Standard Time zone Push the Save button for save setting If you push the ESC button, you can return to ESC setting Menu Reference This image is just for reference. So it can be different from real situation Screen & Menu function can be changed for high quality improvement 24 GATEWARE-EM Doalltech 11. Menu setting Password Password change Save Product password setting Pushing the Save button to save the password If you push the ESC button, you can return to ESC setting Menu

. Reference This image is just for reference. So it can be different from real situation Screen & Menu function can be changed for high quality improvement Default setting password is 0000. E E n n v v i i r r o o n n

. S S e e t t t t i i n n g g E n g l i s h 25 GATEWARE-EM Doalltech 1. External Interlocking device - Turn-Gate R e f e r e n c e h s i l g n E Turnstile Gate System Turnstile Gate System CCTV for Safety management 13.56Mhz READER 13.56Mhz READER Finger Vein READER Finger Vein READER Photo 1 Turnstile Gate System Photo 1. Using Various RFID TYPE(13.56Mhz) and Finger Vein TYPE at the same time is available When worker check the scan card, device takes a picture by Safety CCTV automatically 26 Reference This is a use example. This can be composed differently in case of actual application. GATEWARE-EM Doalltech 2. External Interlocking device Composition item External Interlocking product External Interlocking product External Monitor External Speaker R e f e r e n c e E n g l i s h Camera1 Camera2 Camera3 Finger Vein READER RFID 13.56Mhz Crossing barrier for car Flashlight Turnstile Gate System Reference Can interlock with another various devices 27 GATEWARE-EM Doalltech 1. Additional function Transmission of field pictures through network aft Transmission of field pictures through network aft er image capturing of 1/4 channel camera. er image capturing of 1/4 channel camera. R e f e r e n c e h s i l g n E 28 Reference This is a use example. This can be composed differently in case of actual application. GATEWARE-EM 2. F A Q Case 1 System is not working Please check the Power supply connection Please check the Battery charge status Case 2 Data down and upload don't work. Please check the internet connection Please check the Modem & Network status Case 3 Camera is not displayed Please check the Camera connection Please check the Menu setting Case 4 RFID card recognition doesn't work. Please check the RFID Reader connection Please check the Menu setting Case 5 There is no system response. (EX : Time sign stops) Please push the RESET button and restart 29 Please check FAQ before A/S Request Reference Doalltech R e f e r e n c e E n g l i s h 29 GATEWARE-EM Doalltech R e f e r e n c e h s i l g n E 2. F A Q Case 6 LCD Screen is monotonous in the state of ash or black color. push the RESET or power switch to restart When being occurred same symptom after re-start, please contact to Doall tech and then confirm it Case 7 There is no sound during working Please check the volume button by key pad When being occurred same symptom after re-start, please contact to Doall tech and then confirm it. Case 8 The battery does not be charged. Please check the Power supply cable, Adapter, internal battery terminal connection Change the old battery to new battery Case 9 There is error message window On the Screen Please press the ENT button of keypad.

(When the program is abnormal, it will be worked again after closing). In case the keypad does not be inputted, please start again by using RESET button or power switch. When being occurred same symptom after re-start, please contact to Doal ltech and then confirm it. Reference Please check FAQ before A/S Request

* Battery is consumption goods & 6months A/S warranty available GATEWARE-EM Doalltech 3. Before A/S Request Error type Cause and Solution Please check the Power supply cable. In case of Power supply failure Please check the 220 volt as right voltage Please check the electronic status of receptacle Please check the System Power supply Cable In case system is not In case system is not Working Working Please check loss of Internal supply item Please check Error message from Monitor Please check Monitor Power supply cable Please check the Monitor Cable connection Please Check the system Power supply Please check the Camera cable connection Please check the Menu setting In case of Monitor Screen Shutting down by itself In case of Camera screen failure 31 R e f e r e n c e E n g l i s h 31 GATEWARE-EM Doalltech R e f e r e n c e h s i l g n E 3. Before A/S Request Error type Cause and Solution In case internet is not working In case Router is not In case Router is not working working In case External Relay is not working

(Turn gate,Flash light) In case of not recognizing the RFID tag Please network setting in LAN setting Menu Please check LAN cable connection Please contact with internet company Please check the router motion lamp, Power supply cable & Adapter Please check LAN cable connection Please check LAN cable connection Please check Router menu setting Please check Power supply cable Please check the Relay Data cable connection Please setting code from Relay setting Menu Please check the RFID Reader cable connection Please check the RFID Reader setting from Serial Pot Menu GATEWARE-EM Doalltech 3. Before A/S Request Error type Cause and Solution Key pad doesnt work Please check Key pad cable connection Please make sure to push key pad Please confirm whether input at current Menu is possible. (There are keys that do not be operated at partial menu) Please check the Flash cable connection If flash lamp is not turned on Please confirm the setting figure of related flash in the setting Menu Please check Flash lamp status In case power supply and status indication of RFID recognition lamp do not turned on Please check the Lamp connection cable Please confirm whether RFID recognition is correct Please confirm whether the system is turned on. In case other operations are not correct Please after shutting down, restart Please after checking error type, contact with doalltech 33 R e f e r e n c e E n g l i s h 33 GATEWARE-EM Doalltech R e f e r e n c e h s i l g n E 4. Product Size - Hardware Hardware CPU Processor Marvell PXA320-P

(ARM11 Core 806Mhz) RAM 133Mhz DDR SDRAM 512MByte Memory Nand Flash NAND Flash 128MByte EPLD Lattice isp MACH LC4128V Display 800 X 480 (7 Wide TFT Color LCD) Touch Screen Touch Screen Controller SD / MMC SD / MMC 1 Slot LAN 10/100 M Ethernet (91C111) Camera CCD Camera Audio AC97 (WM9712) Internal x 2, External x 1 UART Max3232 (Debugger x1, Serial x3) Video Controller Video IN x 3, Video OUT x 1

(Techwell TW2835) KEY PAD 4x4 Push Button Reference Product specification can be changed for high quality improvement GATEWARE-EM Doalltech 4. Product Size - Software RFID ATMEGA 13.56Mhz Reader Finger Vein FDV-566,567 USB Host USB 1.1 Host Client USB 2.0 Client CPU-JTAG JTAG Emulator 20pin E-JTAG JTAG Emulator 8pin Relay Sensor Battery Signal Out Relay x 4 Signal Input Sensor x 8 Li-ion 14V, 8800 mAh Li-ion 14V, 8800 mAh LED Color LED x 3 Flash Light Flash x 2 Software O/S Windows CE 5.0 Core Application Doalltech GatewareEM / GatewareCS R e f e r e n c e E n g l i s h 35 Product specification can be changed for high quality improvement Reference 35 GATEWARE-EM Doalltech 4. Product Size Block Diagram Int. Serial Port x1

(13.56Mhz RFID) Ext. Serial port x3

(13.56Mhz RFID Reader, Finger Vein Reader) Debugger port x1 Photo Sensor, Photo Sensor, Roof Coil Sensor Roof Coil Sensor Turnstile Gate, Vehicle Control Bar Relay X4 Relay X4 Sensor X8 R e f e r e n c e h s i l g n E 36 Reference Product specification can be changed for high quality improvement GATEWARE-EM Doalltech 5. FCC RF INTERFERENCE STATEMENT FCC RF INTERFERENCE STATEMENT FCC RF INTERFERENCE STATEMENT NOTE :

NOTE :

This equipment has been tested and found to comply with the limits for a Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential provide reasonable protection against harmful interference in a residential installation. installation. This equipment generates, uses and can radiate radio frequency energy and, if This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following encouraged to try to correct the interference by one or more of the following measures. measures.

- Reorient or relocate the receiving antenna.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. which the receiver is connected.

- Consult the dealer or an experienced radio, TV technical for help.

- Consult the dealer or an experienced radio, TV technical for help.

- Only shielded interface cable should be used.

- Only shielded interface cable should be used. Finally, any changes or modifications to the equipment by the user not expressly Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or manufacturer could void the users authority to approved by the grantee or manufacturer could void the users authority to Operate such equipment Operate such equipment R e f e r e n c e E n g l i s h Reference Product specification can be changed for high quality improvement 37 GATEWARE-EM Doalltech 5. FCC RF INTERFERENCE STATEMENT R e f e r e n c e E n g l i s h Reference Product specification can be changed for high quality improvement 38 GATEWARE-EM Doalltech Additional charge item R e f e r e n c e h s i l g n E Battery AV LCD MONITOR Internet homepage www.doalltech.com Contact 0707-018-5900 02) 555-9779 Ubiquitous team 39 Reference Picture size of each item can be different from real product size,, Some part items can be changed depending on the situation