User Manual SAFETY INFORMATION ACCESSORIES CONTROLS Charge Connect the included USB Cable to the USB Port of Computer or Adapter USB Port. blue LED Speaker Switch Key Slide to switch from headphone to speaker mode. Volume Control: Under the music or conversation mode:
(1)Volume +: Press and hold the volume + (3~5s), the volume will increase gradually.
(2)Volume -: Press and hold the volume - (3~5s), the volume will decrease gradually. In the state of music mode, press the volume + shortly (1s), then will go to previous song; press the volume - shortly (1s), then will go to next song Bluetooth headset BT-592 Pairing Indicator Light Power/Pair/Play/Pause/
Press and hold to power the unit on. Press and hold for 5+seconds to begin pairing;
Press and hold to Power the unit off Press to play or pause the current track;
Press to adjust the volume increase/Previous song Volume+
Volume-
Press to adjust the volume decrease/Next song CONTROLS AND FEATURES SPERKER&MIC BLUETOOTH BLUETOOTH 10 LINE IN 11 LED INDICATORS 12 Please note:
The external speakers on the headphone are not waterproof.Do not use in rainy or damp weather conditions. DC Power Input Line In Microphone FEATURES Supports Bluetooth v3.0 Wireless range:33 feet Supports profile A2DP,AVRCP, HSP,HFP Built-in microphone with noise cancellation technology Micro-USB port for battery recharge 3.5mm audio input Adjustable headband DC battery power:built-in 1000 mAH Rechargeable lithiumion battery Headphone battery time: up to 25+hours Speaker battery time: up to 3 hours INCLUDES 3.5mm audio cable USB cable User manual Headphone speaker diameter:40mm Impedance:32 S.P.L: 109dB3dB Rated power: 100mW Frequency Response:20Hz-20KHz Speaker diameter:40mm Impedance:4 S.P.L: 81dB3dB Rated power:3W Frequency Response: 160Hz20KHz Microphone Unit:4*1.5mm S.P.L:-423dB Pairing a Bluetooth Device for the First Time Playing music wirelessly 1.With the unit off, press and hold the Power/Pair/Play/Pause button for about 4s.The indicator will flash red and blue.When pairing, remain within 3 feet of the unit. 2.Using the native controls on your bluetooth device,select the BT-592 in your bluetooth setting to pair. If your device requests a password, enter the password 0000. Refer to the user manual for your specific device for instructions on pairing and connecting bluetooth devices.After initial pairing,the unit will stay paired unless unpaired manually by the user or erased due to reset of the device;
Remarks: If your device should become unpaired or you find it is unable to connect,repeat the above steps;
1.To play or pause a selected track,use the native controls on the connected bluetooth device or press the power/pair/play/pause button. 2.Audio played through the connected bluetooth device will now be heard through the headphones;
Using the Speaker phone 1.When a call is received, a ringtone will sound through the speakers. 2.Press the power/pair/play/pause button t accept the call or accept the call with the native controls on the connected device. 3.The incoming call received through the device will now be heard through the headphones. 4.To end a call, press the power/pair/play/pause button or end the call using the native controls on th connected device. Using the audio input Require a 3.5mm audio cable(included) 1.Connect a 3.5mm audio cable to the line in input on the unit and the audio output on an audio device. 2.Use the native device controls on the connected device to play your audio through the unit. Note:The headphones do not have to be powered on to hear music through the line in input.Do this to conserve battery power;
Status Indicator Power on Flashing blue light Power off Charging No light Red light on Fully charged Blue light on Pairing Flashing red and blue light FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation