AB204 () 260x140mm(2mm)65x140mm 105g 1 Product Introduction cover remote controller tripod bracket 1/4 Standard 1/4 screw Bracket handle cover Section 3 Aluminum alloy pull pole Handle sleeve Shaking Oth-AB204DY Cooperate with mobile phone to achieve remote control Scrolling Up Turn Left Long press boot
/ Click Play / Pause Double click like Turn Right Turn Down Photo Key 2 Mobile folder introduction
(Expand Mode) Shaking Read the instruction before using.
(Close mode) 3 This product adopts an innovative all-in-one three-machine mobile phone clip design, which can carry 3 mobile phones at the same time, support multi-
platform live broadcasting, tailor-made for network anchors, and can be used with screw-door recharging lamps. 3 /
instruction of remote controller separation / charging Finally: Squeeze the pull rod that has been pulled off with your hands. Each time you pull a section to the left, twist and lock a section of the pull rod. Once you turn right, you release the pull lever and can freely adjust the appropriate length. Note: when pushing the pull pole, the tripod will be closed automatically. P-
lease do not put your hand directly on the tripod bracket to prevent clamping injury. charging port 5 Open tripod operation instructions First: Press the triangle button at the bottom of the product to open the expansion mode.
:
Take out remote controller take out the remote from the top of the remote control
:
Install the remote controller Secure the bottom of the remote control and press it down. 4 Switch on and off 3 SEAJIC Fix the mobile phone to the mobile phone bracket, press the camera button for 3 seconds long until the green light flash on, Bluetooth pairingmode; Turn on the Bluetooth settings on the mobile phone, search for and connect to the
"SEAJIC" then the green light open; you can press the camera button on selfie stick for taking pictures. Then: one hand holds the center position of the selfie rod, and the other hand holds the top cover of the selfie rod and pulls the lever out. 6 Put away the tripod One hand holds the center position of the selfie rod, the other hand wiggles the lever to the right to unlock the lever, and then pushes it back into the handle sleeve. Note: when pulling out the pull pole, the bottom tripod bracket will open automatically at the same time, p-
lease do not open forcibly the bo-
ttom tripod bracket with your hand, avoiding to cause product damage. 7 360 Use of scaffold and 360-degree direction transfer platform 360 360 Open the lid on the bracket, direct the one-piece three-machine mobile phone CLIP screw hole to the screw port of the product and rotate the twi-
sted mobile phone CLIP clockwise, you can use the product bracket cloud table function, manually adjust the 360-degree universal switch button, can achieve 360-degree rotation shooting. 360 Gropro////
1/4 360 360 It is suitable for a variety of digital product equipment such as Gropro /
Microsing/Card Chiper / Projector / SLR. When used, the 1/4 inch screw port of the digital product is aligned with the screw port of the product and the digital product is twisted and twisted clockwise. You can use this pro-
duct bracket function. Manually adjust the 360-degree universal switch button to achieve 360-degree rotation shooting and enjoy the joy of tech-
nology. 8 Specifications
/Size 35.5x43x350mm
/Selfie weight 169g
/Cell phone CLIP weight 175.2g
/Capacity
/Selfie stick size 50mAh 350mm
/Selfie stick lever size 1850mm(10mm)
/Tripod folding size 350mm
/Tripod unfolding size 1850mm(10mm)
/Material
/Aluminum Rod 9 Notes Micro When battery is low, take out remote controller and charge it through Micro in-
terface. AB204 () 260x140mm(2mm)65x140mm 105g 360 This product adopts innovative detachable single bracket mobile phone clip, sliding rail design, need not take down mobile phone can achieve 360 degree free rotation. 3 /
instruction of remote controller separation / charging Finally: Squeeze the pull rod that has been pulled off with your hands. Each time you pull a section to the left, twist and lock a section of the pull rod. Once you turn right, you release the pull lever and can freely adjust the appropriate length. Note: when pushing the pull pole, the tripod will be closed automatically. P-
lease do not put your hand directly on the tripod bracket to prevent clamping injury. charging port 5 Open tripod operation instructions First: Press the triangle button at the bottom of the product to open the expansion mode.
:
Take out remote controller take out the remote from the top of the remote control
:
Install the remote controller Secure the bottom of the remote control and press it down. Note: when pulling out the pull pole, the bottom tripod bracket will open automatically at the same time, p-
lease do not open forcibly the bo-
ttom tripod bracket with your hand, avoiding to cause product damage. Design of removable cell phone CLIP 4 Switch on and off 3 SEAJIC Fix the mobile phone to the mobile phone bracket, press the camera button for 3 seconds long until the green light flash on, Bluetooth pairingmode; Turn on the Bluetooth settings on the mobile phone, search for and connect to the
"SEAJIC" then the green light open; you can press the camera button on selfie stick for taking pictures. 1/4 Standard 1/4 screw port design Silicone Anti-Slip pad design Silicone Anti
-Slip pad Horizontal / vertical screen switching design
/
Then: one hand holds the center position of the selfie rod, and the other hand holds the top cover of the selfie rod and pulls the lever out. 6 Put away the tripod One hand holds the center position of the selfie rod, the other hand wiggles the lever to the right to unlock the lever, and then pushes it back into the handle sleeve. Coking Read the instruction before using. 7 360 Use of scaffold and 360-degree direction transfer platform 360 360 Open the lid on the bracket, direct the one-piece three-machine mobile phone CLIP screw hole to the screw port of the product and rotate the twi-
sted mobile phone CLIP clockwise, you can use the product bracket cloud table function, manually adjust the 360-degree universal switch button, can achieve 360-degree rotation shooting. 360 Gropro////
1/4 360 360 It is suitable for a variety of digital product equipment such as Gropro /
Microsing/Card Chiper / Projector / SLR. When used, the 1/4 inch screw port of the digital product is aligned with the screw port of the product and the digital product is twisted and twisted clockwise. You can use this pro-
duct bracket function. Manually adjust the 360-degree universal switch button to achieve 360-degree rotation shooting and enjoy the joy of tech-
nology. 8 Specifications
/Size 35.5x43x350mm
/Selfie weight 169g
/Cell phone CLIP weight 52g
/Capacity
/Selfie stick size 60mAh 350mm
/Selfie stick lever size 1850mm(10mm)
/Tripod folding size 350mm
/Tripod unfolding size 1850mm(10mm)
/Material
/Aluminum Rod 9 Notes Micro When battery is low, take out remote controller and charge it through Micro in-
terface. 1 Product Introduction cover remote controller tripod bracket 1/4 Standard 1/4 screw Bracket handle cover Section 3 Aluminum alloy pull pole Handle sleeve Coking Oth-AB204 APP Can focus freely without downloading APP Short press one magnification Press for continuous magnification
/ Photo / switch off Before and after lens switch Shorter by one Long press continuous reduction 2 Mobile folder introduction AB204 () 260x140mm(2mm)65x140mm 105g 1 Product Introduction cover remote controller tripod bracket 1/4 Standard 1/4 screw Bracket handle cover Section 3 Aluminum alloy pull pole Handle sleeve Panorama Remote control, easy to shoot Oth-AB204YT
/ Photo / boot Short one-step reversal Long press continuous reversal Long according to the first grade turn Long press continuous rotation Short press continuous timeTurn around 2 360 Introduction to 360-degree rotating cloud table and mobile phone CLIP Design of removable cell phone CLIP 1/4 Standard 1/4 screw port design Design of removable cell phone CLIP Silicone Anti-Slip pad design 360 360-Degree rotating cloud table Silicone Anti
-Slip pad
/ Switch on / Off Key Panoramic shot 4 Switch on and off 3 SEAJIC Fix the mobile phone to the mobile phone bracket, press the camera button for 3 seconds long until the green light flash on, Bluetooth pairingmode; Turn on the Bluetooth settings on the mobile phone, search for and connect to the
"SEAJIC" then the green light open; you can press the camera button on selfie stick for taking pictures. Open the top cover of the selfie rod, direct the screw hole of the electric cloud stand to the screw port of the selfie rod, and rotate clockwise to tighten the electric cloud stand. 360 Then open the lid of the electric cloud table, put the detachable single-
bracket mobile phone into the 360-degree rotating electric cloud table, the electric cloud table has a built-in rotating motor, no need for mobile phone adjustment, just start the boot key through the exclusive Bluetooth remote control, can achieve panoramic shooting. 360Gropro/
Suitable for 360 cameras, micro-single cameras, Gropro / mobile phones and other digital devices. 3 /
instruction of remote controller separation / charging charging port 5 Open tripod operation instructions First: Press the triangle button at the bottom of the product to open the expansion mode.
:
Take out remote controller take out the remote from the top of the remote control
:
Install the remote controller Secure the bottom of the remote control and press it down. Then: one hand holds the center position of the selfie rod, and the other hand holds the top cover of the selfie rod and pulls the lever out. Panorama Read the instruction before using. 6 Put away the tripod 8 Specifications One hand holds the center position of the selfie rod, the other hand wiggles the lever to the right to unlock the lever, and then pushes it back into the handle sleeve. Finally: Squeeze the pull rod that has been pulled off with your hands. Each time you pull a section to the left, twist and lock a section of the pull rod. Once you turn right, you release the pull lever and can freely adjust the appropriate length. 7 Note: when pushing the pull pole, the tripod will be closed automatically. P-
lease do not put your hand directly on the tripod bracket to prevent clamping injury.
/Size 35.5x43x350mm
/Selfie weight
/Cell phone CLIP weight 360/
360-Degree rotating cloud table 169g 52g 55g
()/Capacity(selfie) 60mAh
(360)/
Capacity(360-Degree rotating cloud table) 110mAh
/Selfie stick size 350mm
/Selfie stick lever size 1850mm(10mm)
/Tripod folding size 350mm
/Tripod unfolding size 1850mm(10mm)
/Material
/Aluminum Rod 9 Notes 360 Micro When the power is insufficient, remove the remote control and 360-degree ro-
tating cloud table first, and use the Micro interface to charge the remote control. Note: when pulling out the pull pole, the bottom tripod bracket will open automatically at the same time, p-
lease do not open forcibly the bo-
ttom tripod bracket with your hand, avoiding to cause product damage. 7 7 7 Shaking Read the instruction before using. Coking Read the instruction before using. Panorama Read the instruction before using. FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.