USER MANUAL Main Parameters id Product Name:R/C Construction Trucks Item No. :E519-003 Double E Material: plastic and electronic components Batteries: Car battery: 1pc of 4. 8V AA rechargeable battery Remote controller battery: 2pcs of 1. 5V AA batteries Turn ON/OFF:
Up Key:
Horn Key Down Key DEMO Key- Programme Key ia Left our | a... Trigger Battery Installation Indicator 1.Open the battery cover of remote controller as the Fig 2A showed, inserts 2pcs of 1. 5V AA batteries and then screws the cover. 2.Open the cover under the truck by screwdriver, inserts 1pc of 4. 8V AA rechargeable battery as the correct polarity, and then screw the cover. (Fig 2B) rewdriver Charger
/, a Button Hay) battery ee Position battoly connector Screw-socket pack Fig 2C Fig 2A) Fig 2B Notice: first charging requires
. 8 hours, future charging requires Basic Operation and Functions 4 to 5 hours. Please confirm the batteries of remote controller and car have been installed as the correct polarity, and then turn the switch to ON. Be make sure the truck and the remote controller are the same channel. (Fig 3A) 1.Turn ON/OFF
@Press the ON/OFF key, there will be a start-up sound. To press the key again after starting, the truck would be turned off with a sound of DI.
(Fig 3B) , 2.Horn Key 9 38
@ Press the Horn Key after starting the truck, the truck would emit a simulated sound. 3.Forward/backward fm = a
@To push the Left Trigger ahead/back, the truck 4 = () 0 would go forward/backward; when forward, the i Backward, lights on front and back would be lighted on; Forward backward, the lights would be flashed (turn off when o Fig 3C in a mute station) (Fig 3C) 4.Turn Left/Right Turn right
@To push the Left Trigger forward/backward, and + =
Right Trigger turns left/right, the truck would turn iene left/right. i The lights on left would be flashed when turn left, a =
the same of right lights when turn right. (Fig 3D) ( Turn left Fig 3D 5.Loading & Unloading
@ After starting, press the Up (Down) key, the bucket would be rise (falled) slowly; at the same time, the front and back lights would be lighted on with the mechanical sound. There would be the TATA sound at the zenith or nadir for clutch protection. (Fig 3E) 4{4 These functions could be multiple used for simulating operation. Advanced Function 1.Mute Switch e After starting the truck, to press the Horn Key for a long time, the truck would turn in a mute condition. To press the Horn Key again, it could be turned in to the sound station. 2.DEMO Function
@ To press the DEMO key, the truck could operate a series of the functions automatically; to exit the functions through pressing any keys. 3.Programme Function
@ To press the Programme Key after starting until the indicator turning to red, there would be the state of Program. 4.Auto OFF
@ Without receiving any remote controlled signals after starting, the truck would auto off in 50 seconds. When turn off, the truck would with a sound of DI and at a standby stations. 5.Athletics Function
@ There are A/B/C three channels on the remote controller and truck, so more than two players could play together through choosing different channel.
<n om Recharging Notice: please push the power switch to OFF if not be used for a long time. Please take out of the batteries from the remote controller and truck for storing to avoid weeping. Fl Notice 1.Dont play the toy on the road, select a safe place for operation to avoid dangerous. 2.Play the toy in water may cause short circuit damage. Please use the dry cloth to clean the car. 3.1f abnormal speed or reaction, it maybe because of insufficient battery power, please recharge the battery. 4.The batteries should be charged under adult supervision. Please use the batteries recommended. 5.Please install the battery in a correct polarity. 6.Do not mix new and old batteries together, short-circuited. 7.Please charge the battery before initial use. 8.Dont break the antenna to prevent injury. 9.Please check the plug case and other units of charge regularly to make sure that it is not broken. Dont use again if you find abnormality of the charger. 10.Please do not connect the product to different performance power. changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This equipment has been tested and foundto comply with the limits fora Class B digital device, pursuant to Part 15 ofthe FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, ifnot installed and usedin accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different ffom that to which the receiver is connected. Consult the dealer or an experiened radio/TV technician for help. Frequency bands : 2402MHz to 2480MHz Maximum output power: 2pBm Manufacturer:Doubleeagle Industry (China) Limited. Address: Xingda Industrial Park, Chenghai District, Shantou City, Guangdong Province, China. Importer:JAMARA e.K. Address: Inh. Manuel Natterer Am Lauerb ti hl 5 DE-88317 Aichstetten CHOKING HAZARD-small parts, not for children under 3 years. Specifications colors and contents may vary from illustrations.